Catalytic ammonia oxidation on platinum: mechanism and catalyst restructuring at high and low pressure

Catalytic ammonia oxidation over platinum has been studied experimentally from UHV up to atmospheric pressure with polycrystalline Pt and with the Pt single crystal orientations (533), (443), (865), and (100). Density functional theory (DFT) calculations explored the reaction pathways on Pt(111) and Pt(211). It was shown, both in theory and experimentally, that ammonia is activated by adsorbed oxygen, i.e. by O(ad) or by OH(ad). In situ XPS up to 1 mbar showed the existence of NH(x)(x= 0,1,2,3) intermediates on Pt(533). Based on a mechanism of ammonia activation via the interaction with O(ad)/OH(ad) a detailed and a simplified mathematical model were formulated which reproduced the experimental data semiquantitatively. From transient experiments in vacuum performed in a transient analysis of products (TAP) reactor it was concluded that N(2)O is formed by recombination of two NO(ad) species and by a reaction between NO(ad) and NH(x,ad)(x= 0,1,2) fragments. Reaction-induced morphological changes were studied with polycrystalline Pt in the mbar range and with stepped Pt single crystals as model systems in the range 10(-5)-10(-1) mbar.     

Crystal structures of Ln4Ni3O8 (Ln = La, Nd) triple layer T'-type nickelates

Single-phase Ln4Ni3O8 (Ln = La, Nd) nickelates were synthesized and their crystal structures were determined by Rietveld refinement of powder neutron diffraction data. The crystal structures of these mixed-valent Ni1+/Ni2+ phases belong to the T'-type and are built by intergrowth of LnO2 fluorite layers with triple NiO2 infinite-layer structural blocks. The major driving force of transformation of the LnO rock-salt block of the parent Ln4Ni3O10-delta Ruddlesden-Popper phases to the fluorite arrangement in the reduced Ln4Ni3O8 phases is attributed to internal structural stress. This transformation allows longer Ni-O bonds in Ln4Ni3O8 without overstretching of the Ln-O bonds, especially in the equatorial plane. The observed displacement of Ni atoms from the outer NiO2 planes toward the Ni atom of the central NiO2 plane in Ln4Ni3O8 is ascribed to large electrostatic repulsion from the fluorite part of the structure. X-ray absorption spectra near the K-edge of Ni suggest that the charge density on the nickel ion is similar for all members of the T'-type Lnn+1NinO2n+2 homologous series, which correlates with nearly constant Ni-O bond lengths observed in all the reduced nickelates. This suggests that the formal changes in the valence state of Ni affect the covalency of the Ni-O bond.     

Kinetics of the CO oxidation reaction on Pt(111) studied by in situ high-resolution x-ray photoelectron spectroscopy

High-resolution x-ray photoelectron spectroscopy has been used to study the kinetics of the CO oxidation reaction on a Pt(111) surface in situ. The study focuses on the interaction of a preadsorbed p(2x2) layer of atomic oxygen with CO dosed using a supersonic molecular beam. Measurements of O 1s and C 1s spectra at 120 K show that CO adsorbs on the oxygen precovered substrate, but no reaction occurs. A maximum CO coverage of 0.23 ML (monolayer) is observed, with CO exclusively bound on on-top sites. In accordance with the literature, bridge sites are blocked by the presence of atomic oxygen. The reaction of CO with preadsorbed O to CO(2) is studied isothermally in a temperature range between 275 and 305 K. The reaction rate initially increases with CO pressure, but saturates at 9x10(-7) mbar. The data indicate that a certain amount of disordered oxygen within the p(2x2) layer acts as a starting point of the reaction and for a given temperature reacts with a higher rate than O in the well-ordered oxygen p(2x2) phase. For the reaction of CO with this ordered phase, the results confirm the assumption of a reaction mechanism, which is restricted to the edges of compact oxygen islands. The activation energy of the reaction is determined to (0.53+/-0.04) eV, with a prefactor of 4.7x10(6+/-0.7) s(-1).     

High-pressure STM of the interaction of oxygen with Ag(111)

To identify surface phases that could play a role for the epoxidation of ethylene on Ag catalysts we have studied the interaction of Ag(111) with O(2) at elevated pressures. Experiments were performed using high-pressure scanning tunneling microscopy (STM) at temperatures between 450 and 480 K and O(2) pressures in the mbar range. Below p(O(2)) approximately 1 mbar the surface largely showed the structure of bare Ag(111). At p(O(2)) above approximately 1 mbar the (4 x 4)O structure and the closely related (4 x 5 radical 3)rect structure were observed. The findings confirm theoretical predictions that the (4 x 4)O structure is thermodynamically stable at the oxygen partial pressure of the industrial ethylene oxide synthesis. However, in other experiments only a rough, disordered structure was observed. The difference is caused by the chemical state of the STM cell that depends on the pretreatment and on previous experiments. The surface was further analyzed by X-ray photoelectron spectroscopy (XPS). Although these measurements were performed after sample transfer to ultra-high vacuum (UHV), so that the surface composition was modified, the two surface states could still be identified by the presence of carbonate or a carbonaceous species, and by the absence or presence of a high-binding energy oxygen species, respectively. It turns out that the (4 x 4)O structure only forms under extremely clean conditions, indicating that the (4 x 4)O phase and similar oxygen-induced reconstructions of the Ag(111) surface are chemically unstable. Chemical reactions at the inner surfaces of the STM cell also complicate the detection of the catalytic formation of ethylene oxide.     

A first-principles investigation of the effect of Pt cluster size on CO and NO oxidation intermediates and energetics

As catalysis research strives toward designing structurally and functionally well-defined catalytic centers containing as few active metal atoms as possible, the importance of understanding the reactivity of small metal clusters, and in particular of systematic comparisons of reaction types and cluster sizes, has grown concomitantly. Here we report density functional theory calculations (GGA-PW91) that probe the relationship between particle size, intermediate structures, and energetics of CO and NO oxidation by molecular and atomic oxygen on Pt(x) clusters (x = 1-5 and 10). The preferred structures, charge distributions, vibrational spectra, and energetics are systematically examined for oxygen (O(2), 2O, and O), CO, CO(2), NO, and NO(2), for CO/NO co-adsorbed with O(2), 2O, and O, and for CO(2)/NO(2) co-adsorbed with O. The binding energies of oxygen, CO, NO, and of the oxidation products CO(2) and NO(2) are all markedly enhanced on Pt(x) compared to Pt(111), and they trend toward the Pt(111) levels as cluster size increases. Because of the strong interaction of both the reactants and products with the Pt(x) clusters, deep energy sinks develop on the potential energy surfaces of the respective oxidation processes, indicating worse reaction energetics than on Pt(111). Thus the smallest Pt clusters are less effective for catalyzing CO and NO oxidation in their original state than bulk Pt. Our results further suggests that oxidation by molecular O(2) is thermodynamically more favourable than by atomic O on Pt(x). Conditions and applications in which the Pt(x) clusters may be effective catalysts are discussed.     

Initial oxidation and interfacial diffusion of Zn on faceted MgO(111) films

The interaction of zinc and faceted MgO(111) thin films prepared on a Mo(110) substrate was investigated in situ by using various surface analysis techniques, including X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, Auger electron spectroscopy, high-resolution electron energy loss spectroscopy, and low-energy electron diffraction. The results revealed that three-dimensional Zn islands exist on the faceted MgO(111) films and that no chemical interaction takes place at the interface at room temperature. Initially, deposited Zn is stable at temperatures below 400 K and diffuses into MgO at temperatures above 425 K. A portion of Zn is oxidized at approximately 10 (-6) mbar O 2 at room temperature. An interfacial phase of Zn x Mg 1- x O was formed after Zn was exposed to approximately 10 (-6) mbar O 2 at temperatures >or=500 K. The faceted structure on the MgO(111) surface is of a disadvantage for the epitaxial growth of ZnO films.     

Structures of a CO adlayer on a Pt(100) electrode in HClO4 solution studied by in situ STM

We have obtained the first in situ STM atomic images of a CO adlayer on a Pt(100)-(1 x 1) electrode in 0.1 M HClO(4) solution, exhibiting a phase transition from c(6 x 2)-10CO to c(4 x 2)-6CO at E > 0.3 V vs. RHE.     

Synergetic effect of surface and subsurface Ni species at Pt-Ni bimetallic catalysts for CO oxidation

Various well-defined Ni-Pt(111) model catalysts are constructed at atomic-level precision under ultra-high-vacuum conditions and characterized by X-ray photoelectron spectroscopy and scanning tunneling microscopy. Subsequent studies of CO oxidation over the surfaces show that a sandwich surface (NiO(1-x)/Pt/Ni/Pt(111)) consisting of both surface Ni oxide nanoislands and subsurface Ni atoms at a Pt(111) surface presents the highest reactivity. A similar sandwich structure has been obtained in supported Pt-Ni nanoparticles via activation in H(2) at an intermediate temperature and established by techniques including acid leaching, inductively coupled plasma, and X-ray adsorption near-edge structure. Among the supported Pt-Ni catalysts studied, the sandwich bimetallic catalysts demonstrate the highest activity to CO oxidation, where 100% CO conversion occurs near room temperature. Both surface science studies of model catalysts and catalytic reaction experiments on supported catalysts illustrate the synergetic effect of the surface and subsurface Ni species on the CO oxidation, in which the surface Ni oxide nanoislands activate O(2), producing atomic O species, while the subsurface Ni atoms further enhance the elementary reaction of CO oxidation with O.     

Adsorption of formaldehyde on Pt(111) and Pt(100) electrodes: cyclic voltammetry and scanning tunneling microscopy

The adsorption of formaldehyde (HCHO) on Pt(111) and Pt(100) electrodes was examined by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) in 0.1 M HClO(4). The extent of HCHO adsorption at both Pt electrodes was evaluated by comparing the CVs, particularly for the hydrogen adsorption and desorption between 0.05 and 0.4 V, obtained in 0.1 M HClO(4) with and without HCHO. The adsorption of HCHO on these Pt electrodes was significant only when [HCHO] >/= 10 mM. Adsorbed organic intermediate species acted as poisons, blocking Pt surfaces and causing delays in the oxidation of HCHO. Compared to Pt(111), Pt(100) was more prone to poisoning, as indicated by a 200 mV positive shift of the onset of HCHO oxidation. However, Pt(100) exhibited an activity 3 times higher than that of Pt(111), as indicated by the difference in peak current density of HCHO oxidation. Molecular resolution STM revealed highly ordered structures of Pt(111)-( radical7 x radical7)R19.1 degrees and Pt(100)-( radical2 x radical2) in the potential region between 0.1 and 0.3 V. Voltammetric measurements further showed that the organic poisons produced by HCHO adsorption behaved differently from the intentionally dosed CO admolecules, which supports the assumption for the formation of HCO or COH adspecies, rather than CO, as the poison. On both Pt electrodes, HCHO oxidation commenced preferentially at step sites at the onset potential of this reaction, but it occurred uniformly at the peak potentials.     

Platinum nanofilm formation by EC-ALE via redox replacement of UPD copper: studies using in-situ scanning tunneling microscopy

The growth of Pt nanofilms on well-defined Au(111) electrode surfaces, using electrochemical atomic layer epitaxy (EC-ALE), is described here. EC-ALE is a deposition method based on surface-limited reactions. This report describes the first use of surface-limited redox replacement reactions (SLR(3)) in an EC-ALE cycle to form atomically ordered metal nanofilms. The SLR(3) consisted of the underpotential deposition (UPD) of a copper atomic layer, subsequently replaced by Pt at open circuit, in a Pt cation solution. This SLR(3) was then used a cycle, repeated to grow thicker Pt films. Deposits were studied using a combination of electrochemistry (EC), in-situ scanning tunneling microscopy (STM) using an electrochemical flow cell, and ultrahigh vacuum (UHV) surface studies combined with electrochemistry (UHV-EC). A single redox replacement of upd Cu from a PtCl(4)(2-) solution yielded an incomplete monolayer, though no preferential deposition was observed at step edges. Use of an iodine adlayer, as a surfactant, facilitated the growth of uniformed films. In-situ STM images revealed ordered Au(111)-(square root 3 x square root 3)R30 degrees-iodine structure, with areas partially distorted by Pt nanoislands. After the second application, an ordered Moiré pattern was observed with a spacing consistent with the lattice mismatch between a Pt monolayer and the Au(111) substrate. After application of three or more cycles, a new adlattice, a (3 x 3)-iodine structure, was observed, previously observed for I atoms adsorbed on Pt(111). In addition, five atom adsorbed Pt-I complexes randomly decorated the surface and showed some mobility. These pinwheels, planar PtI(4) complexes, and the ordered (3 x 3)-iodine layer all appeared stable during rinsing with blank solution, free of I(-) and the Pt complex (PtCl(4)(2-)).     

Role of the anion in the underpotential deposition of cadmium on a Rh(111) electrode: probed by voltammetry and in situ scanning tunneling microscopy

In situ scanning tunneling microscopy (STM) and cyclic voltammetry (CV) were employed to examine the underpotential deposition (UPD) of cadmium on a rhodium(111) electrode in sulfuric and hydrochloric acids. The (bi)sulfate and chloride anions in the electrolytes played a main role in controlling the number and arrangement of Cd adatoms. Deposition of Cd along with hydrogen adsorption occurred near 0.1 V (vs reversible hydrogen electrode) in either 0.05 M H2SO4 or 0.1 M HCl containing 1 mM Cd(ClO4)2. These coupled processes resulted in an erroneous coverage of Cd adatoms. The process of Cd deposition shifted positively to 0.3 V and thus separated from that of hydrogen in 0.05 M H2SO4 containing 0.5 M Cd2+. The amount of charge (80 microC/cm2) for Cd deposition in 0.5 M Cd2+ implied a coverage of 0.17 for the Cd adatoms, which agreed with in situ STM results. Regardless of [Cd2+], in situ STM imaging revealed a highly ordered Rh(111)-(6 x 6)-6Cd + HSO4- or SO42- structure in sulfuric acid,. In hydrochloric acid, in situ STM discerned a (2 x 2)-Cd + Cl structure at potentials where Cd deposition commenced. STM atomic resolution showed roughly one-quarter of a monolayer of Cd adatoms were deposited, ca. 50% more than in sulfuric acid. Dynamic in situ STM imaging showed potential dependent, reversible transformations between the (6 x 6) Cd adlattices and (square root 3 x square root 7)-(bi)sulfate structure, and between (2 x 2) and (square root 7 x square root 7)R19.1 degrees -Cl structures. The fact that different Cd structures observed in H2SO4 and HCl entailed the involvement of anions in Cd deposition, i.e. (bi)sulfate and chloride anions were codeposited with Cd adatoms on Rh(111).     

Self-assembled monolayers on Pt(111): molecular packing structure and strain effects observed by scanning tunneling microscopy

Self-assembled monolayers (SAMs) of octanethiol and benzeneethanethiol were deposited on clean Pt(111) surfaces in ultrahigh vacuum (UHV). Highly resolved images of these SAMs produced by an in situ scanning tunneling microscope (STM) showed that both systems organize into a super-structure mosaic of domains of locally ordered, closely packed molecules. Analysis of the STM images indicated a (square root 3 x square root 3)R30 degrees unit cell for the octanethiol SAMs and a 4(square root 3 x square root 3)R30 degrees periodicity based on 2 x 2 basic molecular packing for the benzeneethanethiol SAMs under the coverage conditions investigated. SAMs on Pt(111) exhibited differences in molecular packing and a lower density of disordered regions than SAMs on Au(111). Electron transport measurements were performed using scanning tunneling spectroscopy. Benzeneethanethiol/Pt(111) junctions exhibited a higher conductance than octanethiol/Pt(111) junctions.     

In situ scanning tunneling microscopy of 1,6-hexanedithiol, 1,9-nonanedithiol, 1,2-benzenedithiol, and 1,3-benzenedithiol adsorbed on pt(111) electrodes

Cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) were used to examine four dithiol molecules, including 1,6-hexanedithiol, 1,9-nonanedithiol, 1,2-benzenedithiol, and 1,3-benzenedithiol, adsorbed on well-ordered Pt(111) electrodes in 0.1 M HClO(4). The open-circuit potential (OCP) of Pt(111) electrodes decreased substantially from 0.95 to 0.3 V (versus reversible hydrogen electrode) upon the adsorption of dithol molecules, which indicates that these adsorbates injected electrons into the Pt electrode. For all dithiol molecules, ordered adlattices of p(2 x 2) and (square root 3 x square root 3)R30 degrees were formed when the dosing concentration was lower than 150 microM and the potential of Pt(111) was more negative than 0.5 V. Raising the potential of Pt(111) from 0.1 to 0.4 V or more positive values could transform p(2 x 2) to (square root 3 x square root 3)R30 degrees before it turned disarray. The insensitivity of the structure of dithiol adlayers with their chemical structures was explained by upright molecular orientation with the formation of one Pt-S bond per dithiol molecule. This molecular orientation was independent of the coverage of dithiol molecules, as nucleation seeds produced at the beginning of adsorption were also constructed with p(2 x 2). The triangular-shaped STM molecular resolution suggested 3-fold binding of sulfur headgroup on Pt(111). All dithiols were adsorbed so strongly on Pt(111) electrodes that switching the potential negatively to the onset of hydrogen evolution in 0.1 M HClO(4) or water reduction in 1 M KOH could not displace dithiol admolecules.     

Electrodeposition of Au monolayer on Pt(111) mediated by self-assembled monolayers

In-situ scanning tunneling microscopy (STM), cyclic voltammetry (CV), and infrared reflection-adsorption spectroscopy (IRRAS) have been used to examine the electrodeposition of gold onto Pt(111) electrodes modified with benzenethiol (BT) and benzene-1,2-dithiol (BDT) in 0.1 M HClO4 containing 10 microM HAuCl4. Both BT and BDT were attached to Pt(111) via one sulfur headgroup. STM and IRRAS results indicated that the other SH group of BDT was pendant in the electrolyte. Both BT and BDT formed (2 x 2) structures at the coverage of 0.25, and they were transformed into (square root(3) x square root(3))R30 degrees as the coverage was raised to 0.33. These two organic surface modifiers resulted in 3D and 2D gold islands at BT- and BDT-coated Pt(111) electrodes, respectively. The pendant SH group of BDT could interact specifically with gold adspecies to immobilize gold adatoms on the Pt(111) substrate, which yields a 2D growth of gold deposition. Molecular resolution STM revealed an ordered array of (6 x 2 square root(13)) after a full monolayer of gold was plated on the BDT/Pt(111) electrode. Since BDT was strongly adsorbed on Pt(111), gold adatoms only occupied free sites between BDT admolecules on Pt(111). This is supported by a stripping voltammetric analysis, which reveals no reductive desorption of BDT admolecules at a gold-deposited BDT/Pt(111) electrode. It seems that the BDT adlayer acted as the template for gold deposit on Pt(111). In contrast, a BT adlayer yielded 3D gold deposit on Pt(111). This study demonstrates unambiguously that organic surface modifiers could contribute greatly to the electrodeposition of metal adatoms.     

Ultrathin TiO(x) films on Pt(111): a LEED, XPS, and STM investigation

Ultrathin ordered titanium oxide films on Pt(111) surface are prepared by reactive evaporation of Ti in oxygen. By varying the Ti dose and the annealing conditions (i.e., temperature and oxygen pressure), six different long-range ordered phases are obtained. They are characterized by means of low-energy electron diffraction (LEED), X-ray photoemission spectroscopy (XPS), and scanning tunneling microscopy (STM). By careful optimization of the preparative parameters, we find conditions where predominantly single phases of TiO(x), revealing distinct LEED pattern and STM images, are produced. XPS binding energy and photoelectron diffraction (XPD) data indicate that all the phases, except one (the stoichiometric rect-TiO2), are one monolayer thick and composed of a Ti-O bilayer with interfacial Ti. Atomically resolved STM images confirm that these TiO(x) phases wet the Pt surface, in contrast to rect-TiO2. This indicates their interface stabilization. At a low Ti dose (0.4 monolayer equivalents, MLE), an incommensurate kagomé-like low-density phase (k-TiO(x) phase) is observed where hexagons are sharing their vertexes. At a higher Ti dose (0.8 MLE), two denser phases are found, both characterized by a zigzag motif (z- and z'-TiO(x) phases), but with distinct rectangular unit cells. Among them, z'-TiO(x), which is obtained by annealing in ultrahigh vacuum (UHV), shows a larger unit cell. When the postannealing of the 0.8 MLE deposit is carried out at high temperatures and high oxygen partial pressures, the incommensurate nonwetting, fully oxidized rect-TiO2 is found The symmetry and lattice dimensions are almost identical with rect-VO2, observed in the system VO(x)/Pd(111). At a higher coverage (1.2 MLE), two commensurate hexagonal phases are formed, namely the w- [(square root(43) x square root(43)) R 7.6 degrees] and w'-TiO(x) phase [(7 x 7) R 21.8 degrees]. They show wagon-wheel-like structures and have slightly different lattice dimensions. Larger Ti deposits produce TiO2 nanoclusters on top of the different monolayer films, as supported both by XPS and STM data. Besides the formation of TiO(x) surfaces phases, wormlike features are found on the bare parts of the substrate by STM. We suggest that these structures, probably multilayer disordered TiO2, represent growth precursors of the ordered phases. Our results on the different nanostructures are compared with literature data on similar systems, e.g., VO(x)/Pd(111), VO(x)/Rh(111), TiO(x)/Pd(111), TiO(x)/Pt(111), and TiO(x)/Ru(0001). Similar and distinct features are observed in the TiO(x)/Pt(111) case, which may be related to the different chemical natures of the overlayer and of the substrate.     

Pb deposition on I-coated Au(111). UHV-EC and EC-STM studies

This article concerns the growth of an atomic layer of Pb on the Au(111)( radical3 x radical3)R30 degrees -I structure. The importance of this study lies in the use of Pb underpotential deposition (UPD) as a sacrificial layer in surface-limited redox replacement (SLRR). SLRR reactions are being applied in the formation of metal nanofilms via electrochemical atomic layer deposition (ALD). Pb UPD is a surface-limited reaction, and if it is placed in a solution of ions of a more noble metal, redox replacement can occur, but limited by the amount of Pb present. Pb UPD is a candidate for use as a sacrificial layer for replacement by any more noble element. It has been used by this group for both Cu and Pt nanofilm formation using electrochemical ALD. The I atom layer was intended to facilitate electrochemical annealing during nanofilm growth. Two distinctly different Pb atomic layer structures are reported, studied using in situ scanning tunneling microscopy (STM) with an electrochemical flow cell and ultrahigh vacuum surface analysis combined directly with electrochemical reactions (UHV-EC). Starting with the initial Au(111)( radical3 x radical3)R30 degrees -I, 1/3 monolayer of I on the Au(111) surface, Pb deposition began at approximately 0.1 V. The first Pb UPD structure was observed just below -0.2 V and displayed a (2 x radical3)-rect unit cell, for a structure composed of 1/4 monolayer each of Pb and I. The I atoms fit in Pb 4-fold sites, on the Au(111) surface. The structure was present in domains rotated by 120 degrees. Deposition to -0.4 V resulted in complete loss of the I atoms and formation of a Pb monolayer on the Au(111), which produced a Moiré pattern, due to the Pb and Au lattice mismatch. These structures represent two well-defined starting points for the growth of nanofilms of other more noble elements. It is apparent from these studies that the adsorption of I- on Pb is weak, and it will rinse away. If Pb is used as a sacrificial metal in an electrochemical ALD cycle and adsorbed I atoms are employed for electrochemical annealing, I atoms will need to be applied each cycle.     

Isocyanate formation in the catalytic reaction of CO + NO on Pd(111): an in situ infrared spectroscopic study at elevated pressures

The catalytic CO + NO reaction to form CO2, N2, and N2O has been studied on a Pd(111) surface at pressures up to 240 mbar using in situ polarization modulation infrared reflection absorption spectroscopy (PM-IRAS). At 240 mbar, for a pressure ratio of PCO:PNO = 3:2 and under reaction conditions, besides adsorbed CO, the formation of isocyanate (-NCO) was observed. Once produced at 500-625 K, the isocyanate species was stable within the entire temperature range studied (300-625 K). On the other hand, its formation required a total CO + NO pressure of at least 0.6 mbar, illustrating the importance of in situ infrared experiments under high-pressure conditions. The significance of the isocyanate formation for the CO + NO reaction on Pd(111) is discussed.     

Thermodynamics and kinetics of oxygen-induced segregation of 3d metals in Pt-3d-Pt(111) and Pt-3d-Pt(100) bimetallic structures

The stability of subsurface 3d transition metals (3d represents Ni, Co, Fe, Mn, Cr, V, and Ti) in Pt(111) and Pt(100) was examined in vacuum and with 0.5 ML atomic oxygen by a combined experimental and density functional theory (DFT) approach. DFT was used to predict the trends in the binding energy of oxygen and in the stability of 3d metals to remain in the subsurface layer. DFT calculations predicted that for both (111) and (100) crystal planes the subsurface Pt-3d-Pt configurations were thermodynamically preferred in vacuum and that the surface 3d-Pt-Pt configurations were preferred with the adsorption of 0.5 ML atomic oxygen. Experimentally, the DFT predictions were verified by using Auger electron spectroscopy to monitor the segregation of Ni and Co in Pt-3d-Pt structures on polycrystalline Pt foil, composed of mainly (111) and (100) facets. The activation barrier for the oxygen-induced segregation of Ni was found to be 17+/-1 kcal/mol attributed to the Pt(111) areas and 27+/-1 kcal/mol attributed to the Pt(100) areas of the Pt foil. For Pt-Co-Pt, the activation barrier was found to be 10+/-1 kcal/mol and was attributed to the Pt(111) areas of the Pt foil. The Bronsted-Evans-Polanyi relationship was utilized to predict the activation barriers for segregation of the other Pt-3d-Pt(111) and Pt-3d-Pt(100) systems. These results are further discussed in connection to the activity and stability for cathode bimetallic electrocatalysts for proton exchange membrane fuel cells.     

Modulating the reactivity of Ni-containing Pt(111)-skin catalysts by density functional theory calculations

We present here a first principles density functional theory investigation of the reactivity of Pt(111)-skin catalysts, which are varied from surface alloys with Ni to bulk PtxNi 1-x (x=0.25,0.50,0.75) alloys. Molecule (CO, O, and H) adsorption and oxidation of CO+O and H+O reactions were studied and analyzed in detail. Independent of the adsorbates, the interaction between adsorbates and substrates becomes weakened with increase in Ni, due to the downshift of d-band center of surface Pt atoms. Moreover, activation barriers of CO and H oxidation toward atomic oxygen gradually decrease. In term of CO preferential oxidation (PROX) in excess of hydrogen, it turns out that the overall reactivity and selectivity rely on the optimum of various elementary steps involved such as competitive molecular (dissociative) adsorption and oxidation reaction. The present calculations show that Pt3Ni(111) with Pt overlayer is an optimum catalyst for CO PROX in excess of hydrogen.     

In situ surface X-ray scattering of stepped surface of platinum: Pt(311)

Surface structure of a stepped surface of Pt, Pt(311) (=2(100)-(111)), has been determined under potential control in 0.1 M HClO4 with the use of in situ surface X-ray scattering (SXS). The crystal truncation rods (CTRs) are reproduced well with the (1x2) missing-row model. Relaxation of surface layers, which is observed on the low-index planes of Pt, is not found on Pt(311) in the "adsorbed hydrogen region". CTRs at 0.10 (RHE) have the same feature as those at 0.50 V, showing that the surface layers of Pt(311) have no potential dependence. Scanning tunneling microscopy (STM) also supports the (1x2) structure of Pt(311) in 0.1 M HClO4.