Solvothermal synthesis and characterizations of monophenyltin complexes in drum conformations

A series of drum structures of organotin complexes with various carboxylic acids have been solvothermally synthesized and characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C and ¹¹⁹Sn) spectra and X-ray crystallography. The molecular structure analyses reveal that all of the complexes have endo drum structures. Furthermore, each of the drum structures has a hole, in which atoms of a given radius could be held.     

Polyoxometalates functionalized by bisphosphonate ligands: synthesis, structural, magnetic, and spectroscopic characterizations and activity on tumor cell lines

We report the synthesis and characterization of eight new Mo, W, or V-containing polyoxometalate (POM) bisphosphonate complexes with metal nuclearities ranging from 1 to 6. The compounds were synthesized in water by treating Mo(VI), W(VI), V(IV), or V(V) precursors with biologically active bisphosphonates H(2)O(3)PC(R)(OH)PO(3)H(2) (R = C(3)H(6)NH(2), Ale; R = CH(2)S(CH(3))(2), Sul and R = C(4)H(5)N(2), Zol, where Ale = alendronate, Sul = (2-Hydroxy-2,2-bis-phosphono-ethyl)-dimethyl-sulfonium and Zol = zoledronate). Mo(6)(Sul)(2) and Mo(6)(Zol)(2) contain two trinuclear Mo(VI) cores which can rotate around a central oxo group while Mo(Ale)(2) and W(Ale)(2) are mononuclear species. In V(5)(Ale)(2) and V(5)(Zol)(2) a central V(IV) ion is surrounded by two V(V) dimers bound to bisphosphonate ligands. V(6)(Ale)(4) can be viewed as the condensation of one V(5)(Ale)(2) with one additional V(IV) ion and two Ale ligands, while V(3)(Zol)(3) is a triangular V(IV) POM. These new POM bisphosphonates complexes were all characterized by single-crystal X-ray diffraction. The stability of the Mo and W POMs was studied by (31)P NMR spectroscopy and showed that all compounds except the mononuclear Mo(Ale)(2) and W(Ale)(2) were stable in solution. EPR measurements performed on the vanadium derivatives confirmed the oxidation state of the V ions and evidenced their stability in aqueous solution. Electrochemical studies on V(5)(Ale)(2) and V(5)(Zol)(2) showed reduction of V(V) to V(IV), and magnetic susceptibility investigations on V(3)(Zol)(3) enabled a detailed analysis of the magnetic interactions. The presence of zoledronate or vanadium correlated with the most potent activity (IC(50)~1-5 μM) against three human tumor cell lines.     

Controlling conformations and physical properties of meso-tetrakis(phenylethynyl)porphyrins by ring fusion: synthesis, properties and structural characterizations

The boron trifluoride-catalyzed Rothemund condensations of phenylpropargylaldehyde with 4,7-dihydro-4,7-ethano-2H-isoindole or 3,4-diethylpyrrole in dichloromethane at low temperature give 5,10,15,20-tetrakis(phenylethynyl)porphyrins bearing bicyclo[2.2.2]octadiene and octaethyl substituents, respectively. The former undergoes a retro Diels-Alder reaction to afford 5,10,15,20-tetrakis(phenylethynyl)benzoporphyrin quantitatively. The different conformations of the porphyrin periphery were determined by X-ray diffraction and their redox and spectroscopic properties have been investigated.     

Fluorinated surfactants: synthesis, properties, effluent treatment

Fluorinated surfactants and synthetic fire fighting foams are presented. The fluorinated part of those surfactants can be obtained industrially either by electrofluorination or by telomerization. The fact that fluorine atoms are present in a surfactant molecule modifies its behaviour compared to classical surfactants. It gives to the molecule outstanding chemical and thermal stabilities. Fluorine also produces in these surfactants very low surface tension in aqueous solution even when used at reduced concentrations.For those reasons, it is shown that fluorinated surfactants are particularly adapted to the formulation of film forming fire fighting foams in which they are associated to classical hydrocarbon surfactants. Finally, a way of removing the mean components of a fire fighting foam from the waste water resulting from fire fighting training or a real application is presented.     

Shamrock surfactants: synthesis and characterization

Two types of a new class of surfactants with three headgroups, which possess the general structure 1, have been prepared. Within structure 1, a central headgroup is connected to two flanking headgroups by hydrocarbon chains. The term "shamrock" is used to describe surfactants of structure 1, denoting their triple-headed character and reflecting the fact that shamrocks have leaflets in groups of three. The major lipophilic character of shamrock surfactants is provided by the two hydrocarbon chains linking the three headgroups and not by long-chain alkyl groups appended to the linking hydrocarbon chains or the headgroups. The new surfactants are 2a (2,2,15,15,28,28-hexamethyl-2,15,28-triazonianonacosane triiodide), 2b (2,2,15,15,28,28-hexamethyl-2,15,28-triazonianonacosane trichloride), 3a (O,O'-di-[10-(N,N,N-tripropylammonio)decyl]phosphorodithioate bromide), and 3b (O,O'-di-[10-(N,N,N-tributylammonio)decyl]phosphorodithioate bromide). Compound 14 (2,2,9,9,16,16-hexamethyl-2,9,16-triazoniaheptadecane triiodide) was prepared for comparison with 2a. Surfactants 2 and 3 were characterized in water by measurement of their Krafft temperatures and critical aggregation concentrations, and their aggregates were studied by 1H NMR spectroscopy, dynamic laser light scattering, and phase-contrast optical microscopy. Aqueous 2b was also studied by cryo-etch high-resolution scanning electron microscopy, which revealed irregularly shaped cells containing a complex matrix of surfactant. Coacervates were observed by optical microscopy upon the hydration of 2 and 3.     

Sterically encumbered acyclic diphosphazanes: synthesis, conformations and coordination behavior

The reaction between lambda3-diphosphazane [EtN(PCl2)2] and the sodium salts of substituted phenols affords sterically encumbered diphosphazanes [EtN{P(OR)2}2] (R = -C6H3iPr2-2,6 (1), -C6H3Me2-2,6 (2) and -C6H2Me3-2,4,6 (3)). When the same reaction was carried out with bulky sodium 2,4-di-tert-butyl-4-methylphenoxide, only a monosubstitution takes place to result in the formation of [EtN{PCl(OR)}2] (R = -C6H2tBu2-2,6-Me-4) (4). Further reaction of 2 with [Mo(CO)4(NBD)] produces cis-[(EtN{P(OC6H3Me2-2,6)2}2)Mo(CO)4] (5). Diphosphazanes 1-4 and the metal derivative 5 have been characterized by means of their analytical data and EI-MS, IR and multinuclear NMR (1H and 31P) spectral data. The solid-state structure of the diphosphazanes 1, 2 and 4, and the molybdenum complex 5 have been determined by X-ray diffraction studies. Irrespective of the size of substituent, the bulky groups on the phosphorus and nitrogen are on the same side of the P-N-P skeleton with a local C2v symmetry. The central nitrogen remains almost trigonal planar in all the compounds.     

Chiral biscavitand propellers: synthesis, conformations and multiple guest binding

[structure: see text]. The synthesis and properties of molecules containing two cavitand bowls, with interbowl linkages comprising one carbon atom at various oxidation levels, are reported. A carbonyl-bridged biscavitand binds three CH2Cl2 molecules in the solid state through a helical conformation. Evidence for the same chiral conformation in the solution phase is presented.     

Dendritic nanostructures of silver: facile synthesis, structural characterizations, and sensing applications

Silver nanodendrites are synthesized by a simple surfactant-free method using a suspension of zinc microparticles as a heterogeneous reducing agent. Structural characterizations suggest the preferential growth along 100 and 111 directions by oriented attachment of silver nanocrystals in the diffusion limit, leading to the formation of silver nanodendrites 20-30 nm in stem and branch diameter and 5-50 microm in length. Surface-enhanced Raman scattering studies show that the silver nanodentrites give an intensive and enhanced Raman scattering when pyridine was used as a probing molecule. We have also demonstrated that the silver nanodendrites increase the sensitivity of an electrochemical glucose biosensor by as much as 1-2 orders of magnitude.     

Glycidyl methacrylate derivatized xylan-rich hemicelluloses: synthesis and characterizations

In this paper, a novel type of hemicellulosic derivative containing polymerizable double bonds (C=C) was synthesized by chemical reaction of xylan-rich hemicelluloses and glycidyl methacrylate (GMA) in dimethyl sulfoxide (DMSO) in presence of catalysts. The chemical structure, reaction mechanism, and rheological properties of the derivative were investigated by means of FT-IR, ¹H and ¹³C-NMR, DEPT 135 NMR, GC–MS and rheometer. The influence of the reaction conditions including reaction time, temperature, catalysts, and the amount of reagents on the degree of substitution were investigated in detail. Results showed that the chemical reaction of xylan-rich hemicelluloses with GMA was transesterification, which resulted in direct attachment of methacrylate (MA) groups to xylan-rich hemicelluloses, instead of GMA. A maximum degree of substitution of 0.94 could be achieved under the optimum reaction condition (40 °C, 1.8 equiv of GMA to per xylose unit, 36 h, 20 % DMAP). Results from rheological analysis indicated that the aqueous solutions of the methacrylated xylan-rich hemicelluloses (MAXH; 0.5, 1.0 and 2.0 wt%) exhibited typical shear-thinning behavior in the range of shear rates tested. The viscoelasticity of MAXH solutions increased with the increasing concentration and DS.     

Propyl-ended hemifluorinated surfactants: synthesis and self-assembling properties

The advantages of using hemifluorinated surfactants as an efficient alternative to detergents for manipulating membrane proteins in aqueous solution have been demonstrated in recent reports. However, the large-scale synthesis of these surfactants is still considered as a major matter and has limited their use for biochemical purposes. We report herein the synthesis of a novel series of perfluorohexane-based surfactants endowed with a short propyl hydrocarbon tip and whose polar head size is modulated by the presence of two or three glucose moieties. The synthetic route is based on the radical addition of two alkenes onto the 1,6-diiodoperfluorohexane using AIBN as a radical initiator, affording the surfactants in satisfactory overall yields. The self-assembling properties of these hemifluorinated surfactants were studied by surface tension measurements, dynamic light scattering, as well as their behavior upon reversed-phase chromatography and were compared with those of their perfluorinated analogues. Our findings strongly suggest the predominant influence of the propyl tip on both adsorption and micellization phenomena as well as on the hydrophobic character of the surfactants, whereas as previously observed, the shorter ethyl tip does not greatly affect these properties when compared to the perfluorinated analogues. Moreover, all the surfactants reported here self-assemble into small and monodisperse aggregates, a feature of crucial importance for biochemistry applications.     

Polyoxometalates based compounds for green synthesis of aldehydes and ketones

Molecular oxygen within Polyoxometalates(POMs) based compounds are ideal oxidants with high atom economy and its use results in the production of water as the only byproduct. Significant progress has been made in the development of catalytic methods for aerobic alcohol oxidation to have aldehydes and ketones with POMs based compounds. They are alternative to the use of traditional hypervalent iodine catalyst systems which are with molecular oxygen as a terminal oxidant. Further, POMs based catal...     

Derivation and synthesis of renewable surfactants

This critical review focuses on the origins and preparation of bio-based surfactants, defined here as non-soap, amphiphilic molecules in which the carbon atoms are derived from annually renewable feedstocks. Environmental concerns and market pressures have led to greater relevance of these chemicals in commercial applications in recent years and extensive research has gone into exploring new classes of surfactants. Highlighted here are examples of bio-based surfactants that are produced on an industrial scale and/or are based on abundant starting materials. The trend of increasing use of renewable resources as starting materials for surfactants is introduced, followed by extensive discussion of the major classes of bio-derived hydrophobes and hydrophiles. Also discussed is the status of research and development with regard to biosynthetically produced surfactants. Finally, concluding remarks address the potential for new surfactant molecular structures as a result of ongoing development in the chemistry of biorefineries, i.e., that the transformation of lignocellulose into fuels is likely to support the manufacturing of new bio-based coproducts (238 references).     

Polyaniline nanofibers: chemical synthesis using surfactants

Nanofibers of doped polyaniline.HCSA having diameters 1-2 nm are observed in TEM images of bath sonicated aqueous dispersions of larger nanofibers (30-50 nm diameter) synthesized by surfactant-assisted chemical oxidative polymerization of aniline in dilute aqueous organic acids.     

Sterol surfactants: from synthesis to applications

An overview is given of sterol surfactants, including raw material aspects, classification and synthesis routes, physico-chemical behaviour and applications in pharmaceuticals and cosmetics.     

Study on synthesis,characterizations, and properties of pyridinol-blocked isocyanates and waterborne polyurethane

A series of pyridinol-blocked isophorone isocyanates were synthesized through esterification reaction, Fries rearrangement, and blocking reaction and characterized by ¹H-NMR, ¹³C-NMR, and Fourier transform infrared spectra. Based on the synthesized blocked isocyanates, the blocked waterborne polyurethane (BWPU) was prepared by the self-emulsification method. The deblocking studies revealed that the deblocking temperature reduces with electron-withdrawing and steric hindrance substituents on the ortho position of pyridinol. The stability, molecular weight (M_w), particle size, viscosity, and hydrophilicity of BWPU were studied and compared. The results showed that with an increased amount of blocking agents, molecular weight, particle size, and viscosity decrease and the hydrophilicity increases.     

Gemini imidazolium surfactants: synthesis and their biophysiochemical study

New gemini imidazolium surfactants 9-13 have been synthesized by a regioselective epoxy ring-opening reaction under solvent-free conditions. The surface properties of these new gemini surfactants were evaluated by surface tension and conductivity measurements. These surfactants have been found to have low critical micelle concentration (cmc) values as compared to other categories of gemini cationic surfactants and also showed the tendency to form premicellar aggregates in solution at sufficiently low concentration below their cmc values. The thermal degradation of these surfactants was determined by thermograviometry analysis (TGA). These new cationic surfactants have a good DNA binding capability as determined by agarose gel electrophoresis and ethidium bromide exclusion experiments. They have also been found to have low cytotoxicity by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay on the C6 glioma cell line.     

C80 encaging four different atoms: the synthesis, isolation, and characterizations of ScYErN@C80

The synthesis, isolation, and spectroscopic characterizations of an endohedral fullerene with four heteroatoms encapsulated (ScYErN@C80) are reported for the first time. The isomeric structure and electronic properties of this molecule are studied by various spectrometry methods such as high-performance liquid chromatography (HPLC), laser desorption time-of-flight (LD-TOF) mass spectroscopy, cyclic voltammetry, Fourier transform infrared (FTIR) spectroscopy, and visible-near infrared (vis-NIR) absorption spectroscopy. The carbon cage of ScYErN@C80 is assigned as Ih-C80, and the four-membered ScYErN cluster is suggested to rotate rapidly inside the fullerene cage. Six electrons are transferred from the nuclear cluster ScYErN to the fullerene cage, which leads to a closed-shell electronic structure of the Ih-C80 and results in excellent stability of this molecule.     

Optically active mixed phthalocyaninato-porphyrinato rare-earth double-decker complexes: synthesis, spectroscopy, and solvent-dependent molecular conformations

Reaction between the optically active metal-free phthalocyanine with a pi system with noncentrosymmetrical C(2) [corrected] symmetry ((S)- and (R)-H(2){Pc(OBNP)(2)}; OBNP=binaphthylphthalocyanine) and half-sandwich complexes [M(III)(acac)(TClPP)] (M=Y, Eu; TClPP=meso-tetrakis(4-chlorophenyl)porphyrinate; acac=acetylacetonate), which were generated in situ from [M(acac)(3)].n H(2)O and H(2)(TClPP) in n-octanol at reflux, provided the first optically active protonated mixed phthalocyaninato-porphyrinato rare-earth double-decker complexes [M(III)H{Pc(OBNP)(2)}(TClPP)] (M=Y, Eu) in good yield. In addition to electronic absorption spectroscopy and magnetic circular dichroism results, circular dichroism shows different spectroscopic features of these mixed-ring rare-earth double-decker compounds in different solvents, such as DMF and CHCl(3), which was well-reproduced on the basis of time-dependent density functional theory calculation results for the yttrium species (S)-[Y(III){Pc(OBNP)(2)}(Por)](-) (Por=porphyrinate, which is obtained by removing the four chlorophenyl groups from the TClPP ligand) in terms of the change in the rotation angle between the two macrocyclic ligands in the double-decker molecules. These results revealed the solvent-dependent nature of the molecular conformation of mixed-ring rare-earth double-decker complexes, which suggests a new way of tuning the optical and the electrochemical properties of sandwich-type bis(tetrapyrrole)-metal double-decker complexes in solution by changing the solvent.     

Nanostructure synthesis using surfactants and copolymers

Self-assembled structures of surfactants and block copolymers provide a valuable tool for controlling nanostructure formation in polymers and inorganic solids. The past year has seen a huge number of different new nanoparticles and mesostructured solids. A high level of control of the mesoscopic and macroscopic morphologies has been reached for both polymer nanostructures and mesoporous inorganic materials. © 1999 Elsevier Science Ltd.