Matrix polyelectrolyte capsules based on polysaccharide/MnCO₃ hybrid microparticle templates

An efficient strategy for biomacromolecule encapsulation based on spontaneous deposition into polysaccharide matrix-containing capsules is introduced in this study. First, hybrid microparticles composed of manganese carbonate and ionic polysaccharides including sodium hyaluronate (HA), sodium alginate (SA) and dextran sulfate sodium (DS) with narrow size distribution were synthesized to provide monodisperse templates. Incorporation of polysaccharide into the hybrid templates was successful as verified by thermogravimetric analysis (TGA) and confocal laser scanning microscopy (CLSM). Matrix polyelectrolyte microcapsules were fabricated through layer-by-layer (LbL) self-assembly of oppositely charged polyelectrolytes (PEs) onto the hybrid particles, followed by removal of the inorganic part of the cores, leaving polysaccharide matrix inside the capsules. The loading and release properties of the matrix microcapsules were investigated using myoglobin as a model biomacromolecule. Compared to matrix-free capsules, the matrix capsules had a much higher loading capacity up to four times; the driving force is mostly due to electrostatic interactions between myoglobin and the polysaccharide matrix. From our observations, for the same kind of polysaccharide, a higher amount of polysaccharide inside the capsules usually led to better loading capacity. The release behavior of the loaded myoglobin could be readily controlled by altering the environmental pH. These matrix microcapsules may be used as efficient delivery systems for various charged water-soluble macromolecules with applications in biomedical fields.     

Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

Polyelectrolyte microcapsules templated on poly(styrene sulfonate)-doped CaCO3 particles for loading and sustained release of daunorubicin and doxorubicin

A strategy to incorporate and release anti-cancer drugs of daunorubicin (DNR) and doxorubicin (DOX) in preformed microcapsules is introduced, which is based on charge interaction mechanism. Oppositely charged poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) were assembled onto PSS doped-CaCO₃ colloidal particles in a layer-by-layer manner to yield core-shell particles. After removal of the carbonate cores, hollow microcapsules with entrapped PSS were fabricated, which showed spontaneous loading ability of positively charged DNR and DOX. The drug loading was confirmed quantitatively by observations under confocal laser scanning microscopy, transmission electron microscopy and scanning force microscopy. Quantification of the drug loading was performed under different conditions, revealing that a larger amount of drugs could be incorporated at higher drug feeding concentrations and higher salt concentrations. However, putting additional polyelectrolyte layers on the microcapsules after core removal resulted in weaker drug loading efficiency. The drug release behaviors from the microcapsules with different layer numbers were studied too, revealing a diffusion controlled release mechanism at the initial stage (4 h).     

Hydrothermal-induced structure transformation of polyelectrolyte multilayers: from nanotubes to capsules

The assembled polyelectrolyte nanotubes composed of poly(styrenesulfonate) and poly(allylamine hydrochloride) multilayers by using the layer-by-layer assembly combined with the porous template method can be transformed into capsules by a high-temperature treatment. Scanning electron microscopy and confocal laser scanning microscopy images revealed the whole transition process. The structure transformation of polyelectrolyte multilayers after annealing can be initiated by the input of thermal energy which leads to a breakage of ion pairs between oppositely charged polyelectrolyte groups. The transition process from tubes to capsules is supposed to be driven by the Raleigh instability and leads to the generated polyelectrolyte capsules with different sizes.     

制备聚电解质空腔胶囊及其荧光蛋白装载

以三聚氰胺甲醛(MF)微粒为模板,采用逐层静电自组装技术交替吸附聚苯乙烯磺酸钠(PSS)和聚烯丙基胺盐酸盐(PAH),得到具有核壳结构的复合式微球,然后通过pH=1的盐酸溶液除去中心模板,得到直径约为3～4μm的空腔胶囊.使用藻红蛋白作为探针分子,通过比较空腔胶囊装载前后荧光强度的变化,发现pH在4～5之间时,胶囊呈现最大的蛋白装载量.pH在6～10的范围内,藻红蛋白在胶囊上的装载量几乎不变.pH3时,装载能力很差.此外,通过荧光共聚焦显微镜对不同pH条件下的蛋白装载规律进行了成像分析.一部分藻红蛋白在pH=4的条件下通过扩散进入了胶囊的内部,而pH=7的条件下,藻红蛋白不进入胶囊内部,而是吸附在表面.     

pH-responsive protein microcapsules fabricated via glutaraldehyde mediated covalent layer-by-layer assembly

Bovine serum albumin (BSA) hollow microcapsules were fabricated through glutaraldehyde (GA) mediated covalent layer-by-layer assembly. The GA cross-linking of the adsorbed BSA on the colloidal particles enabled their surfaces to be covered by reactive aldehyde groups, which reacted with BSA molecules to result in another covalently linked layer. Repeating of this cycle could then yield particles coated with BSA multilayers. Hollow microcapsules well dispersed in water were obtained after core removal. The good integrity and morphology of the BSA capsules were confirmed and characterized by confocal laser scanning microscopy, scanning electron microscopy and scanning force microscopy. The obtained BSA microcapsules possess reversible pH response, i.e., the capsules are permeable to macromolecules below pH 4 or above pH 10, while impermeable in between. The mechanisms of permeability transition were discussed. Using this property, dextran, with a molecular weight of ~155 kDa, was successfully loaded.     

Swelling and shrinking of polyelectrolyte microcapsules in response to changes in temperature and ionic strength

Swelling and shrinking of polyelectrolyte microcapsules consisting of poly(styrene sulfonate, sodium salt) (PSS) and poly(diallyldimethyl ammonium) chloride (PDADMAC) multilayers have been observed in response to temperature and electrolyte exposure, respectively. Heat-induced capsule swelling and capsule wall volume reduction were observed by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). On the other hand, pronounced shrinking in diameter induced by exposure to an electrolyte was observed in parallel to increases in the thickness of the capsule wall. The estimated wall volume was reduced to two thirds of the control for the salt-exposed capsules and one half for the salt-exposed and simultaneously annealed capsules. This reduction in volume was supposedly mainly caused by the compression of the capsule wall due to the ionic screening from the electrolyte. The highly porous microstructure of the multilayers and loosely bound PSS/PDADMAC complex are thought to be responsible for the structure of the PSS/PDADMAC capsules being easily modulated upon annealing and salt-exposure.     

Bioactive galactose-branched polyelectrolyte multilayers and microcapsules: self-assembly, characterization, and biospecific lectin adsorption

We describe the fabrication of multilayers and microcapsules with biologically designed targeting activity using chemoenzymatic synthesized carbohydrate-branched polyelectrolytes. A novel cationic d-galactose-branched copolymer [poly(vinyl galactose ester-co-methacryloxyethyl trimethylammonium chloride), PGEDMC] is alternated with poly(styrene sulfonate) (PSS) to form thin multifilms by the layer-by-layer (LbL) technique on such different solid surfaces as quartz slides, poly(ethylene terephthalate) (PET) films, silicon wafers, and polystyrene (PS) microparticles. The experimental protocols were first optimized on flat, smooth silica substrates using UV-vis, contact angle, and atomic force microscopy (AFM) measurements. The film properties of PGEDMC/PSS multilayers are modified by varying polyelectrolyte concentration, ionic strength, and counteranion types. Hollow capsules were formed after the removal of colloidal templates; transmission (TEM) and scanning (SEM) electron microscopy were used to verify the LbL process integrity. PGEDMC/PSS planar films and capsules carrying beta-galactose as recognition signals have specific recognition abilities with peanut agglutinin (PNA) lectin rather than concanavalin A (Con A) lectin observed by fluorescence spectroscopy.     

Assembly of Alternated Multivalent Ion/Polyelectrolyte Layers on Colloidal Particles. Stability of the Multilayers and Encapsulation of Macromolecules into Polyelectrolyte Capsules

Alternating adsorption of multivalent ions and oppositely charged polyelectrolytes on colloid particles has been investigated. Multilayer films composed of Tb³⁺/polysterene sulfonate (PSS) and 4-pyrene sulfate/polyallylamine (PAH) were successfully assembled on polysterene sulfonate (PS) and melamine formaldehyde (MF) latex particles. The amount of assembled material was estimated by fluorescence and the linear growth of the film versus the number of layers was demonstrated. These multilayers are not stable and can be decomposed by salt and temperature. Dissolution of MF particles leads to formation of hollow capsules consisting of multivalent ion/polyelectrolyte multilayers. Comparative analysis of the capsules was done by confocal and scanning force microscopy. Complex hollow spheres consisting of Tb³⁺/PSS or 4-PS/PAH as an inner shell and stable PSS/PAH as an outer shell were produced. Due to selective permeability of the outer shell after degradation of the inner shell the multivalent ions are released out of the capsule while the polyelectrolytes fill the capsule interior. This is indicative of swelling of the capsule by osmotic pressure. The filled capsules were studied by confocal and scanning electron microscopy. Possibilities of encapsulating macromolecules in defined amounts per capsule are discussed.     

Magnetic switch of permeability for polyelectrolyte microcapsules embedded with Co@Au nanoparticles

We explored using a magnetic field to modulate the permeability of polyelectrolyte microcapsules prepared by layer-by-layer self-assembly. Ferromagnetic gold-coated cobalt (Co@Au) nanoparticles (3 nm diameter) were embedded inside the capsule walls. The final 5 mum diameter microcapsules had wall structures consisting of 4 bilayers of poly(sodium styrene sulfonate)/poly(allylamine hydrochloride) (PSS/PAH), 1 layer of Co@Au, and 5 bilayers of PSS/PAH. External alternating magnetic fields of 100-300 Hz and 1200 Oe were applied to rotate the embedded Co@Au nanoparticles, which subsequently disturbed and distorted the capsule wall and drastically increased its permeability to macromolecules like FITC-labeled dextran. The capsule permeability change was estimated by taking the capsule interior and exterior fluorescent intensity ratio using confocal laser scanning microscopy. Capsules with 1 layer of Co@Au nanoparticles and 10 polyelectrolyte bilayers are optimal for magnetically controlling permeability. A theoretical explanation was proposed for the permeability control mechanisms. "Switching on" of these microcapsules using a magnetic field makes this method a good candidate for controlled drug delivery in biomedical applications.     

Reversible polyelectrolyte capsules as carriers for protein delivery

A reversible drug delivery system based on spontaneous deposition of a model protein into preformed microcapsules has been demonstrated for protein delivery applications. Layer-by-Layer assembly of poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) onto polystyrene sulfonate (PSS) doped CaCO₃ particles, followed by core removal yielded intact hollow microcapsules having a unique property to induce spontaneous deposition of bovine serum albumin (BSA) at pH below its isoelectric point of 4.8, where it was positively charged. These capsules showed reversible pH dependent open and closed states to fluorescence labeled dextran (FITC-Dextran) and BSA (FITC-BSA). The loading capacity of BSA increased from 9.1 × 10⁷ to 2.03 × 10⁸ molecules per capsule with decrease in pH from 4.5 to 3. The loading of BSA-FITC was observed by confocal laser scanning microscopy (CLSM), which showed homogeneous distribution of protein inside the capsule. Efficient loading of BSA was further confirmed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The interior capsule concentration was as high as 209 times the feeding concentration when the feeding concentration was increased from 1 to 10 mg/ml. The deposition was initially controlled by spontaneous loading mechanism at lower BSA concentration followed by diffusion controlled loading at higher concentration; which decreased the loading efficiency from 35% to 7%. Circular dichroism (CD) measurements and Fourier transform infrared spectroscopy (FTIR) confirmed that there was no significant change in conformation of released BSA in comparison with native BSA. The release was initially burst in the first 0.5 h and sustained up to 5 h. The hollow capsules were found to be biocompatible with mouse embryonic fibroblast (MEF) cells during in vitro cell culture studies. Thus these pH sensitive polyelectrolyte microcapsules may offer a promising delivery system for water soluble proteins and peptides.     

Strong response of multilayer polyelectrolyte films to cationic surfactants

The influence of common cationic surfactants on the physical properties of differently composed polyelectrolyte films prepared by the layer-by-layer (LbL) technology was investigated. Free-standing polyelectrolyte films as microcapsules showed a fast, strong response to the addition of less than 1 mM cationic surfactant cetyltrimethylammonium bromide (CeTAB). As a function of the polyelectrolyte composition, the behavior of the capsules varied from negligible changes to complete disintegration via strong swelling. The response of microcapsules consisting of (poly(allylamine hydrochloride)(PAH)/poly(styrene sulfonate)(PSS))(4) was associated with a 5-fold volume increase, a fast switch of permeability, and in the case of fluorescently labeled films a 4-fold increase in fluorescence intensity. The kinetics and strengths of the interaction process were investigated by confocal laser scanning microscopy (CLSM) and fluorescence spectroscopy. Also, the relative stabilities of the polycation/polyanion and surfactant/polyanion complexes were determined. A mechanism was suggested to explain the interactions between the cationic surfactants and polyelectrolyte capsules. The strong response can be exploited in potential applications such as the triggered release of drugs or other encapsulated materials, the fluorescence-based detection of cationic detergents, and a switchable stopper in microchannels. However, the high sensitivity of LbL films to traces of cationic surfactants can also limit their applicability to the encapsulation of drugs or other materials because pharmaceutical or technical formulations often contain cationic surfactants as preservatives such as benzalkonium salts (BAC). It was demonstrated that undesired capsule opening can be effectively prevented by cross-linking the polyelectrolyte multilayers.     

Thermal behavior of polyelectrolyte multilayer microcapsules. 1. The effect of odd and even layer number

The temperature-dependent behavior of hollow polyelectrolyte multilayer capsules consisting of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(styrene sulfonate) (PSS) with a different number of layers was investigated in aqueous media using confocal laser scanning microscopy, scanning and transmission electron microscopy, atomic force microscopy, and elemental analysis. Capsules with an even number of layers exhibited a pronounced shrinking at elevated temperature resulting in a transition to a dense sphere, whereas capsules with an odd number of layers swelled during heating to 5-fold of their initial size followed by their rupture. This effect increases for odd layer numbers and decreases for even layer numbers with increasing layer number. According to elemental analysis, an excess of PDADMAC monomers exists within the multilayers of capsules with an odd number of layers leading to a repulsion between the positive charges, whereas shells with an even number of layers have a balanced ratio between the oppositely charged polyions, so that the temperature-dependent behavior is controlled by the different interactions between polyelectrolytes and the bulk water. At a certain temperature, the polyelectrolyte material softens thus facilitating any rearrangement. Besides incubation temperature, the duration of heating has an influence on the restructuring of the multilayers.     

Poly(ethyleneimine) microcapsules: glutaraldehyde‐mediated assembly and the influence of molecular weight on their properties

Poly(ethyleneimine) (PEI) microcapsules were prepared via the method of glutaraldehyde (GA)‐mediated covalent layer‐by‐layer (LbL) assembly, which utilized GA to cross‐link the adsorbed PEI layer and to introduce free aldehyde group on the surface for the next PEI adsorption on MnCO₃ microparticles, followed by core removal. Evidenced by ellipsometry, the PEI multilayers grew nearly linearly along with the layer number and their thickness was controlled at the nanometer scale. The hollow structure, morphology, and wall thickness were characterized by scanning electron microscopy (SEM), scanning force microscopy (SFM), and confocal laser scanning microscopy (CLSM), revealing that the capsule structure as well as the cut‐off molecular weight of the capsule wall could be tuned by the molecular weight of PEI. This offers a general and novel pathway to fabricate single component capsules with pre‐designed structure (size, shape, and wall thickness) and properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Multilayer microcapsules as anti-cancer drug delivery vehicle: deposition, Sustained release, and in vitro bioactivity

A drug delivery system based on spontaneous deposition of soluble, low-molecular-weight therapeutic agents has been developed for the purpose of sustaining drug release. Layer-by-layer assembly of oppositely charged polyelectrolytes onto melamine formaldehyde (MF) colloidal particles, followed by removal of the cores at low pH has yielded intact hollow microcapsules having the ability to induce deposition of various water-soluble substances. Dynamic observation by confocal laser scanning microscopy provided direct evidence of such deposition. Dependence of loading rate on molecular weight was investigated. Efficient loading of an anti-cancer drug, daunorubicin (DNR), was confirmed by transmission electron microscopy (TEM). Its release was quantified by fluorometry. The results indicated that loading, and subsequent release, could be tuned by factors such as feeding concentrations, temperature, and salt concentrations. The intrinsic mechanism of loading and release was discussed taking into account the interaction between the drugs and the poly(styrene sulfonate)/MF complex existing in the hollow capsules. With culture of the HL-60 cell line, a kind of human leukemia cell, the presence of DNR-loaded capsules was seen to steadily decrease the cyto-viability. Fluorescence intensity averaged from inside the circles as a function of incubation time.     

Equilibrium distribution of permeants in polyelectrolyte microcapsules filled with negatively charged polyelectrolyte: the influence of ionic strength and solvent polarity

The effects of ionic strength and solvent polarity on the equilibrium distribution of fluorescein (FL) and FITC-dextran between the interior of polyelectrolyte multilayer microcapsules filled with negatively charged strong polyelectrolyte and the bulk solution were systematically investigated. A negatively charged strong polyelectrolyte, poly(styrene sulfonate) (PSS), used for CaCO3 core fabrication, was entrapped inside the capsules. Due to the semipermeability of the capsule wall, a Donnan equilibrium between the inner solution within the capsules and the bulk solution was created. The equilibrium distribution of the negatively charged permeants was investigated by means of confocal laser scanning microscopy as a function of ionic strength and solvent polarity. The equilibrium distribution of the negatively charged permeants could be tuned by increasing the bulk ionic strength to decrease the Donnan potential. Decreasing the solvent polarity also could enhance the permeation of FL, which induces a sudden increase of permeation when the ethanol volume fraction was higher than 0.7. This is mainly attributed to the precipitation of PSS. A theoretical model combining the Donnan equilibrium and Manning counterion condensation was employed to discuss the results.     

Synthesis of size-controlled acid-resistant hybrid calcium carbonate microparticles as templates for fabricating "micelles-enhanced" polyelectrolyte capsules by the LBL technique

Size-controlled, low-dispersed calcium carbonate microparticles were synthesized in the presence of the amphiphilic block copolymer polystyrene-b-poly(acrylic acid) (PS-b-PAA) by modulating the concentration of block copolymer in the reactive system. This type of hybrid microparticles have acid-resistant properties. By investigating the aggregation behaviors of PS-b-PAA micelles by transmission electron microscopy (TEM), the mechanism of hybrid calcium carbonate formation illustrated that the block copolymer served not only as "pseudonuclei" for the growth of calcium carbonate nanocrystals, but also forms the supramicelle congeries, a spherical framework, as templates for calcium carbonate nanocrystal growth into hybrid CaCO(3) particles. Moreover, this pilot study shows that the hybrid microparticle is a novel candidate as a template for fabricating multilayer polyelectrolyte capsules, in which the block copolymer is retained within the capsule interior after core removal under soft conditions. This not only facilitates the encapsulation of special materials, but also provides "micelles-enhanced" polyelectrolyte capsules.     

Polyelectrolyte microcapsules containing molecules of sulfated β-cyclodextrin in the structure of nanosized shell

Alternate adsorption of the molecules of poly(allylamine hydrochloride) (PAA) and sulfated β-cyclodextrin (sulfo-β-CD) is studied by piezoelectric microweighing upon the formation of coatings of nanosized thicknesses by the polyionic assembly procedure. The thickness of planar coatings on the surface of single-crystalline silicon is determined by ellipsometry. The layer-by-layer character of the formation of planar nanosized coating is revealed and assumptions about the structure of the PAA and sulfo-β-CD bilayers are stated. A comparison of the spherical microparticles of polystyrene, as well as manganese and calcium carbonates, demonstrated that it is feasible to use microparticles of calcium carbonate as a template for producing microcapsules. Microcapsules with shells containing five (PAA/sulfo-β-CD) layers are prepared and studied by confocal fluorescent microscopy.     

Influence of the temperature on polyelectrolyte microcapsules: Light scattering and confocal microscopy data

The influence of heating on polyelectrolyte (PE) microcapsules consisting of an even or uneven number of alternating layers of poly(allylamine) and poly(styrenesulfonate) is investigated by the light scattering and confocal microscopy techniques. In the formation of PE microcapsules, CaCO₃ microspherulites are used as “core” dispersed particles. It is established that the capsules decrease in size with increasing temperature and time of heating, irrespective of whether they consist of an even or uneven number of layers. The sensitivity of PE microcapsules to heat is estimated in terms of the activation energy of changes in parameters of their initial structure on heating. It is shown that PE microcapsules consisting of an uneven number of layers are more sensitive to heating as compared to those consisting of an even number of layers. A plausible mechanism is proposed for changes in structure parameters of the microcapsules on heating.     

Balance of hydrophobic and electrostatic forces in the pH response of weak polyelectrolyte capsules

A detailed study of the role of solution pH and ionic strength on the swelling behavior of capsules composed of the weak polyelectrolytes poly(4-vinylpyridine) (P4VP) and poly(methacrylic acid) (PMA) with different numbers of layers was carried out. The polyelectrolyte layers were assembled onto silicon oxide particles and multilayer formation was followed by zeta-potential measurements. Hollow capsules were investigated by scanning electron microscopy and atomic force microscopy. The pH-dependent behavior of P4VP/PMA capsules was probed in aqueous media using confocal laser scanning microscopy. All systems exhibited a pronounced swelling at the edges of stability, at pHs of 2 and 8.1. The swelling degree increased when more polymer material was adsorbed. The swollen state can be attributed to uncompensated positive and negative charges within the multilayers, and it is stabilized by counteracting hydrophobic interactions. The swelling was related to the electrostatic interactions by infrared spectroscopy and zeta-potential measurements. The stability of the capsules as well as the swelling degree at a given pH could be tuned, when the ionic strength of the medium was altered.