几种热塑性特种工程塑料的热分析研究

聚芳醚和聚芳硫醚两类聚合物都为热塑性的耐高温特种高分子材料 ,由于它们的加工性好、加工成型效率高 ,受到了世界各国的高度重视。这两类聚合物在结构上有许多相似之处 ,如它们的主链都含苯环、酮基或砜基 ,而聚芳醚类聚合物的柔性基团为醚键 ,聚芳硫醚类聚合物的柔性基团为硫醚键 ,但由于氧和硫在元素周期表中属于同一族元素 ,原子结构仍然相似 ,因而在某些方面具有一定的可比性。研究它们的性能差异对于改进聚合物性能以及进行进一步的结构设计将有一定的帮助。在这两类聚合物中 ,国内已商品化生产的品种有ＰＥＥＫ、ＰＥＳ和ＰＰＳ ,有…     

基于萘二胺和醚酮结构的高性能聚合物的合成

以聚酰亚胺、聚芳醚酮和聚甲亚胺等为代表的高性能高分子材料具有优异的物理化学性能,在航空航天、核工业以及微电子等领域得到了重要应用[1,2].在一些特殊行业需要聚合物具有良好的溶解     

两种高Tg非线性光学聚合物母体及掺杂,极化的研究

利用具有非线性光学活性的对硝基苯胺掺杂高玻璃化转变温度的聚芳醚砜(PES-C)和聚芳醚酮(PEK-C),得到了两种掺杂含量较高的掺杂型非线性光学聚合物体系。电晕极化表明较高的取向和较慢的松驰。     

聚芳醚酮醚酮酮类聚合物的结晶与多晶型

晶体结构;聚芳醚酮醚酮酮类聚合物的结晶与多晶型     

聚芳醚酮树脂的分子设计与合成及性能

聚芳醚酮树脂是20世纪发展起来的重要特种工程塑料.因其优良的耐热、耐腐蚀、耐摩擦及生物相容性好等特点,在国防军工、武器装备、航空航天、电子、汽车、机械、石油工业、核能及理疗卫生等高技术领有广泛的应用.此类材料大都采用双酚单体和双氟单体通过A2+B2型亲核缩聚反应制备.这类聚合物的分子结构对材料的性能影响较大,一般情况下分子链由醚、酮、苯三元规整结构构成时,聚合物为半结晶态;然而,当分子结构中存在侧基或其他非规整结构往往破坏聚合物的结晶结构,聚合物呈现无定型态.半结晶聚芳醚酮聚合物具有非常优异的耐热、耐化学稳定性一般作为结构型材料使用;无定型聚芳醚酮具有良好的加工性能,并且可进行一些功能化成为一类优异的功能型材料.本文从结构与性能关系出发,介绍了聚芳醚酮树脂种类,聚芳醚酮树脂的发展历程及合成方法;探讨了聚芳醚酮材料结构与性能关系;总结了功能性聚芳醚酮材料的前沿进展;最后结合实际展望了聚芳醚酮的应用发展方向.     

新型可溶性含氟聚芳醚酮的合成、表征及性能

制备了新型可溶性含氟聚芳醚酮高性能材料, 使该材料结合了含氟聚合物与聚芳醚酮两种材料的优点, 既具有很好的热稳定性、溶解性和阻燃性, 又有较低的介电常数和吸湿性[5,9,10]. 对于提高聚芳醚酮类材料的性能, 拓展其使用范围和加工方法具有很大的开发前景和实用价值.     

二甲基取代杂环联苯聚芳醚的合成与性能

由自制的二甲基取代类双酚4-(3,5-二甲基-4-羟基苯基)-2,3-二氮杂萘-1-酮(DM-HPPZ)单体和4,4'-二氟二苯酮、4,4'-二氯二苯砜进行亲核缩聚反应,制备了一类新型的二甲基取代聚芳醚酮、聚芳醚砜及其共聚物聚芳醚砜酮树脂材料.在适宜的聚合条件下,获得了高分子量的聚合物,其特性粘度为0.44～0.75DL·g^-1.利用DSC和TGA研究了聚合物的耐热性能,结果表明,新型聚芳醚玻璃化温度高(568～595K),耐热稳定性好(5%热失重温度大于416℃);拉伸强度为45.4～85.0MPa,力学性能优良.新型聚芳醚在氯仿、DMAc等极性有机溶剂中可溶解并浇铸得到透明、韧性高的薄膜.共聚物结合了聚醚酮好的力学性能和聚醚砜高的耐热性的特点,因此综合性能更佳.     

含二氦杂萘酮结构全芳香杂环聚合物的研究进展

高性能高分子材料在高温下仍保持优异的综合性能,是航空航天、电子电气、高速轨道交通等重要高技术领域不可或缺的材料。在不牺牲耐热性能的前提下改善高性能聚合物的加工性能一直是国内外研究的热点。含二氮杂萘酮结构高性能聚合物是高性能高分子材料的新成员。本文主要综述了含二氮杂萘酮结构的聚芳醚（包括聚芳醚砜酮系列、聚芳醚腈砜酮系列、...     

PPEKK/PEI共混物的相容性及拉伸性能

作为相容体系 ,聚芳醚酮与聚醚酰亚胺 (ＰＥＩ)共混物体系的研究受到了研究者的重视[1～ 4] .由于现在已商品化的聚芳醚酮基本上都是半结晶型聚合物 ,所以有有关无定型聚芳醚酮与聚醚酰亚胺共混物的研究鲜见报道 .含二氮杂萘酮结构聚芳醚酮酮 (ＰＰＥＫＫ)是一种新型耐高温聚合物 ,相比于已经商品化的各种聚芳醚酮 ,ＰＰＥＫＫ除具有优异的综合性能外 ,它最大的特点表现在以下两方面 ,ＰＰＥＫＫ耐热性突出 ,玻璃化转变温度 (Ｔｇ)为 2 4 5℃左右 ,远高于各种商品化的聚芳醚酮 ;ＰＰＥＫＫ为无定型聚合物 ,易溶于多种有机极性溶剂 ,大大的扩…     

多磺化侧链型聚芳醚的合成及性能

本文通过对聚合物的结构设计,采用亲和取代的途径制备了含有甲氧基侧链的聚芳醚聚合物,然后去醚化得到了侧链含有羟基的聚芳醚材料,最后通过接枝的方法将磺酸基团引入聚合物成功的制备出多磺化侧链型聚芳醚质子交换膜材料。此类材料表现出好的热化学稳定性, 80 oC时的质子传导率可达到0.192 S/cm,超过了Nafion 117 薄膜的传导率.同时此类材料表现出低的尺寸稳定性。因此此类材料很有希望在质子交换膜领域得到应用     

氨基酸和酸酐直接反应合成含羧基的酰亚胺类化合物

首次用氨基酸与一系列酸酐直接反应, 合成了20个含羧基的酰亚胺, 对其结构进行了表征. 为含羧基酰亚胺类化合物的合成提供了一种直接、简便的新方法.     

红紫素-18酰亚胺衍生物的化学修饰

以脱镁叶绿酸-a甲酯为原料, 通过对其3-位乙烯基的氧化, 得到了3-甲酰基脱镁叶绿酸甲酯, 利用Wittig反应合成了对应的3-(2-取代的乙烯基)脱镁叶绿酸甲酯. 结合E环的改造, 将其转变成酸酐环进而转变成N-取代的酰亚胺环. 目标化合物具有亲水区和疏水区两部分, 吸收波长明显向红位移. 合成得到的红紫素-18酰亚胺衍生物有可能成为光动力疗癌的理想光敏剂. 合成的新化合物均由核磁共振、红外光谱、元素分析和质谱予以证实.     

利用脱镁叶绿酸甲酯的化学修饰合成红紫素酰亚胺衍生物

A series of novel purpurin-18 imide derivatives exhibiting long wavelength absorption and amphiphilicity wereobtained from methyl pheophorbide-a(MPa)by modification of the peripheral functional groups.The vinyl groupat 3-position was oxidized with OsO_4 and NaIO_4 to form the formyl group and the Grignard reaction of this alde-hyde with the alkyl magnesium bromide was carried out to give the corresponding 3-(1-hydroxylalkyl)pheophor-bide-a.The E-ring of these chlorines was converted into anhydride ring to give purpurin derivatives by air oxidation.The trans-3~2-alkyl purpurin derivatives were obtained by dehydration of hydroxyl group at 3~1-position.TheN-hydroxyl purpurin imide was generated by treatment of the anhydride ring with bydroxylamine hydrochloride.The 3~1-alkylacyl-N-hydroxyl purpurin imides were obtained by oxidation of hydroxyl group at 3~1-position.Theacylation of N-hydroxyl group was completed to afford N-acyloxy purpurin imides.The photocytoxicity of severalcompounds in vitro were tested.     

红紫素-18酰亚胺衍生物的合成

以脱镁叶绿酸甲酯为原料, 通过对其3-位乙烯基的氧化, 得到3-(2,2-二甲氧基乙基)-3-去乙烯基脱镁叶绿酸甲酯, 经过甲酸处理得到3-(2-氧代乙基)-3-去乙烯基脱镁叶绿酸甲酯, 选择适当的条件, 通过Grignard 反应合成了对应的3-(2-羟基烷基)-3-去乙烯基脱镁叶绿酸甲酯. 实验结果表明: 3-(2-氧代乙基)-3-去乙烯基脱美叶绿酸甲酯和Grignard试剂的反应, 只要反应条件控制得当, 13²-位的甲氧甲酰基不会脱去. 结合E环的改造, 将其转变成酸酐环进而转变成N-取代的酰亚胺环. 目标化合物的合成也可以将3-(2,2-二甲氧基乙基)-去乙烯基脱镁叶绿酸甲酯转变成N-取代的酰亚胺后, 再和Grignard试剂反应, 完成目标化合物的合成. 合成的一系列化合物具有长波长的紫外吸收. 化合物的结构变化对紫外吸收的影响作了相应的讨论. 合成的新化合物均由核磁共振、红外光谱、元素分析予以证实.     

Highly Soluble Phenylethynyl-terminated Imide Oligomers and Thermosetting Polyimides Based on 2,2′3,3′-Biphenyltetracarboxylic Dianhydride

The properties of a series of imide oligomers were characterized according to their molecular weights, solubility, and thermal and rheological properties. This series of imide oligomers was synthesized via a two-step method using 2,2′,3,3′-biphenyltetracarboxylic dianhydride(3,3′-BPDA) and aromatic diamines as the monomers, and 4-phenylethynyl phtlialic anhydride(PEPA) as the end-capping agent. The imide oligomers based on 3,3′-BPDA showed excellent solubility in low boiling point solvents and low melt viscosity, which were attributed to their unique bent architectures. High-performance thermosetting polyimides were produced from these oligomers via thermal crosslinking of the phenylethynyl groups. The mechanical and thermal properties of the thermosets were studied using tensile testing, dynamic mechanical thermal analysis(DMTA), and thermogravimetric analysis(TGA). The 3,3′EPDA-based thermosets exhibited excellent thermal properties, with glass transition temperatures of up to 455℃, and 5% mass loss temperatures of up to 569℃ in air. The thermosets based on 3,3-BPDA showed superior thermal properties compared to those derived from TriA-X series oligomers.     

主链含酰亚胺结构的聚醚醚酮的合成及其性能

以1,4-二苯氧基苯为单体分别与N,N′-(4,4′-二苯甲烷)-双-(3,4-二甲酰亚胺基苯甲酰氯)和N,N′-(4,4′-二苯砜)-双-(3,4-二甲酰亚胺基苯甲酰氯),采用低温溶液缩聚合成了2种主链含酰亚胺结构的聚醚醚酮树脂,聚合物的比浓对数粘度分别为0.98和0.61 dL/g。 用FT-IR、¹H NMR和WAXD进行了结构表征,用DSC和TGA测试了热性能。 结果表明,聚合物有较高的玻璃化转变温度(T_g分别为236和263 ℃),N₂气气氛中热分解温度(5%T_d)分别为529和512 ℃,能溶于N,N-二甲基乙酰胺、N-甲基-2-吡咯烷酮、氯仿和间甲酚等常见的有机溶剂中。     

电喷雾质谱法研究聚酰胺、酰亚胺衍生物与HIV-1基因DNA的相互作用

利用电喷雾质谱(ESI-MS)研究了6种识别分子与HIV-1基因调控区DNA的非共价键相互作用. 在研究中比较了不同识别分子与靶序列DNA结合的强弱, 发现双萘酰亚胺衍生物4对此序列DNA具有高亲合性的结合, 并分析了识别分子与DNA复合物的碎裂机理以及结合模式.     

Relationship Between Molecular Structure,Single crystal Packing and Self-Assembly Behavior: A Case Based on Pyrene Imide Derivatives

Development of new n-type one-dimensional (1D) self-assembly nanostructure and a clear understanding of the relationship between molecular structure and self-assembly behavior are important prerequisites for further designing and optimizing organic optoelectronic nanodevice. In this article, a series of n-type organic semiconductor materials based on pyrene imide were successfully synthesized through [4+2] cycloaddition reactions and their preliminary optical and electrochemical properties were studied. The simulated HOMO-LUMO bandgaps via DFT tallied with the experimental data well. The self-assembly of these materials showed needle or fiber-like morphologies, indicating that different conjugation degree or alkyl group had significant influence on their self-assembly behaviors. Furthermore, the single-crystal packing for these molecules were analyzed and it was found out that the changes of conjugated backbone and functional group would affect certain crystal lattice parameter significantly, such as the intermolecular packing distance and crystal size etc, which would further result in different self-assembly morphology.     

Synthesis and characterization of poly(imide‐urethane) based on novel chain‐extender containing both imide and sulphone functions

Several new glycols containing both imide and sulfone groups, sulfonyl bisimide glycol (SBIG), were prepared from primary aromatic diamine, trimellitic anhydride and excess low molecular glycols. Then these SBIGs were used as chain extender to prepare a series of thermoplastic poly(imide‐urethane) (PIU), which introduced imide rings into the backbones. Compared to conventional linear polyurethane (PU), these PIUs exhibited better thermal stabilities because of the presence of the sulfone and built‐in imide groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4469–4477, 2005     

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Abstract

A high temperature thermosetting bisphenol‐A dicyanate (BADCy) was blended with a novel thermoplastic poly(ether imide) (PEI) at various composition. The phase separation behavior during isothermal curing was studied by differential scanning calorimeter (DSC), time‐resolved light scattering (TRLS), scanning electron microscopy (SEM), and rheological measurements. The results suggested that the phase structure changed from separated phase, via co‐continuous phase, to phase inversion with the increase of the PEI content. The curing conversion of BADCy was slightly affected by the composition in the blend and the curing rate was decreased with the increase of PEI content. The co‐continuous phase morphology was attributed to a spinodal decomposition. The initial concentration of PEI had an effect on the rheological behavior during phase separation. It was found by tensile test that the blend with 15 wt.% PEI had higher tensile strength and elongation at break than that without PEI.