A diketopyrrolopyrrole dye-based dyad on a porous TiO2 photoanode for solar-driven water oxidation

Dye-sensitised photoanodes modified with a water oxidation catalyst allow for solar-driven O₂ evolution in photoelectrochemical cells. However, organic chromophores are generally considered unsuitable to drive the thermodynamically demanding water oxidation reaction, mainly due to their lack of stability upon photoexcitation. Here, the synthesis of a dyad photocatalyst (DPP-Ru) consisting of a diketopyrrolopyrrole chromophore (DPPdye) and ruthenium-based water oxidation catalyst (RuWOC) is described. The DPP-Ru dyad features a cyanoacrylic acid anchoring group for immobilisation on metal oxides, strong absorption in the visible region of the electromagnetic spectrum, and photoinduced hole transfer from the dye to the catalyst unit. Immobilisation of the dyad on a mesoporous TiO₂ scaffold was optimised, including the use of a TiCl₄ pretreatment method as well as employing chenodeoxycholic acid as a co-adsorbent, and the assembled dyad-sensitised photoanode achieved O₂ evolution using visible light (100 mW cm⁻², AM 1.5G, λ > 420 nm). An initial photocurrent of 140 μA cm⁻² was generated in aqueous electrolyte solution (pH 5.6) under an applied potential of +0.2 V vs. NHE. The production of O₂ has been confirmed by controlled potential electrolysis with a faradaic efficiency of 44%. This study demonstrates that metal-free dyes are suitable light absorbers in dyadic systems for the assembly of water oxidising photoanodes.

Construction of a water oxidising photoanode with an organic chromophore-catalyst dyad.     

High-performance potassium poly(heptazine imide) films for photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting is an appealing approach by which to convert solar energy into hydrogen fuel. Polymeric semiconductors have recently attracted intense interest of many scientists for PEC water splitting. The crystallinity of polymer films is regarded as the main factor that determines the conversion efficiency. Herein, potassium poly(heptazine) imide (K-PHI) films with improved crystallinity were in situ prepared on a conductive substrate as a photoanode for solar-driven water splitting. A remarkable photocurrent density of ca. 0.80 mA cm⁻² was achieved under air mass 1.5 global illumination without the use of any sacrificial agent, a performance that is ca. 20 times higher than that of the photoanode in an amorphous state, and higher than those of other related polymeric photoanodes. The boosted performance can be attributed to improved charge transfer, which has been investigated using steady state and operando approaches. This work elucidates the pivotal importance of the crystallinity of conjugated polymer semiconductors for PEC water splitting and other advanced photocatalytic applications.

Potassium poly(heptazine imide) photoanode is synthesized, and owing to the improved crystallinity, it has presented a remarkable performance for solar-driven water splitting.     

Enhanced Photoelectrochemical Water Splitting of Black Silicon Photoanode with pH-Dependent Copper-Bipyridine Catalysts

Since the water oxidation half-reaction requires the transfer of multi-electrons and the formation of O−O bond, it's crucial to investigate the catalytic behaviours of semiconductor photoanodes. In this work, a bio-inspired copper-bipyridine catalyst of Cu(dcbpy) is decorated on the nanoporous Si photoanode (black Si, b-Si). Under AM1.5G illumination, the b-Si/Cu(dcbpy) photoanode exhibits a high photocurrent density of 6.31 mA cm⁻² at 1.5 V_RHE at pH 11.0, which is dramatically improved from the b-Si photoanode (1.03 mA cm⁻²) and f-Si photoanode (0.0087 mA cm⁻²). Mechanism studies demonstrate that b-Si/Cu(dcbpy) has improved light-harvesting, interfacial charge-transfer, and surface area for water splitting. More interestingly, b-Si/Cu(dcbpy) exhibits a pH-dependent water oxidation behaviour with a minimum Tafel slope of 241 mV/dec and the lowest overpotential of 0.19 V at pH 11.0, which is due to the monomer/dimer equilibrium of copper catalyst. At pH ∼11, the formation of dimeric hydroxyl-complex could form O−O bond through a redox isomerization (RI) mechanism, which decreases the required potential for water oxidation. This in-depth understanding of pH-dependent water oxidation catalyst brings insights into the design of dimer water oxidation catalysts and efficient photoanodes for solar energy conversion.     

Highly Efficient Photoelectrochemical Water Splitting with an Immobilized Molecular Co4O4 Cubane Catalyst

Molecular Co₄O₄ cubane water oxidation catalysts were combined with BiVO₄ electrodes for photoelectrochemical (PEC) water splitting. The results show that tuning the substituent groups on cobalt cubane allows the PEC properties of the final molecular catalyst/BiVO₄ hybrid photoanodes to be tailored. Upon loading a new cubane complex featuring alkoxy carboxylato bridging ligands ( 1 h ) on BiVO₄, an AM 1.5G photocurrent density of 5 mA cm⁻² at 1.23 V vs. RHE for water oxidation was obtained, the highest photocurrent for undoped BiVO₄ photoanodes. A high solar‐energy conversion efficiency of 1.84 % was obtained for the integrated photoanode, a sixfold enhancement over that of unmodified BiVO₄. These results and the high surface charge separation efficiency support the role of surface‐modified molecular catalysts in improving PEC performance and demonstrate the potential of molecule/semiconductor hybrids for efficient artificial photosynthesis.     

Enhanced Photoelectrochemical Water Oxidation from CdTe Photoanodes Annealed with CdCl2

Most CdTe photoanodes and photocathodes show positive and negative photocurrent onset potentials for water oxidation and reduction, respectively, and are thus unable to drive photoelectrochemical (PEC) water splitting without external applied biases. Herein, the activity of a CdTe photoanode having an internal p‐n junction during PEC water oxidation was enhanced by applying a CdCl₂ annealing treatment together with surface modifications. The resulting CdTe photoanode generated photocurrents of 1.8 and 5.4 mA cm^?2 at 0.6 and 1.2 V_RHE, respectively, with a photoanodic current onset potential of 0.22 V_RHE under simulated sunlight (AM 1.5G). The CdCl₂ annealing increased the grain sizes and lowered the density of grain boundaries, allowing more efficient charge separation. Consequently, a two‐electrode tandem PEC cell comprising a CdTe‐based photoanode and photocathode split water without any external bias at a solar‐to‐hydrogen conversion efficiency of 0.51 % at the beginning of the reaction.     

A co-activation strategy for enhancing the performance of hematite in photoelectrochemical water oxidation

Hematite(α-Fe_2O_3) is a promising photoanode for photoelectrochemical(PEC) water splitting.However,the severe charge recombination and sluggish water oxidation kinetics extremely limit its use in photohydrogen conversion.Herein,a co-activation strategy is proposed,namely through phosphorus(P)doping and the loading of CoAl-layered double hydroxides(CoAl-LDHs) cocatalysts.Unexpectedly,the integrated system,CoAl-LDHs/P-Fe_2O_3 photoanode,exhibits an outstanding photocurrent density of 1.56 mA/cm~2 at 1.23 V(vs.reversible hydrogen electrode,RHE),under AM 1.5 G,which is 2.6 times of pureα-Fe_2O_3.Systematic studies reveal that the remarkable PEC performance is attributed to accelerated surface OER kinetics and enhanced carrier separation efficiency.This work provides a feasible strategy to enhance the PEC performance of hematite photoanodes.     

A BiVO4 Photoanode with a VOx Layer Bearing Oxygen Vacancies Offers Improved Charge Transfer and Oxygen Evolution Kinetics in Photoelectrochemical Water Splitting

Sluggish oxygen evolution kinetics are one of the key limitations of bismuth vanadate (BiVO₄) photoanodes for efficient photoelectrochemical (PEC) water splitting. To address this issue, we report a vanadium oxide (VO_x) with enriched oxygen vacancies conformally grown on BiVO₄ photoanodes by a simple photo-assisted electrodeposition process. The optimized BiVO₄/VO_x photoanode exhibits a photocurrent density of 6.29 mA cm⁻² at 1.23 V versus the reversible hydrogen electrode under AM 1.5 G illumination, which is ca. 385 % as high as that of its pristine counterpart. A high charge-transfer efficiency of 96 % is achieved and stable PEC water splitting is realized, with a photocurrent retention rate of 88.3 % upon 40 h of testing. The excellent PEC performance is attributed to the presence of oxygen vacancies in VO_x that forms undercoordinated sites, which strengthen the adsorption of water molecules onto the active sites and promote charge transfer during the oxygen evolution reaction. This work demonstrates the potential of vanadium-based catalysts for PEC water oxidation.     

Construction of MXene–BiVO4–FeOOH composite photoanode with ultra-low onset potential: performance,DFT calculation and mechanism

Synergistic enhancement of carrier separation-transport and acceleration of water oxidation kinetics is an effective way to boost the current density of photoanode. Therefore, in this work, we constructed Ti₃C₂T_x MXene conductive framework by cyclic voltammetric (CV) deposition within BiVO₄ to force carrier separation-transfer while also depositing O-vacancied FeOOH by in situ self-hydrolysis to accelerate water oxidation kinetics. Predictably, the constructed MXene–BiVO₄–FeOOH composite photoanode exhibits an impressive current density of 4.95 mA/cm² (1.23 V vs. RHE) and 4.1 times higher than that of pristine BiVO₄, as well as an ultra-low onset potential and high stability. This fantastic enhancement is attributed to the MXene conductive framework avoiding carrier recombination, tightening the interface of BiVO₄–FeOOH, moreover O-vacancied FeOOH improves the adsorption of H₂O to accelerate the water oxidation kinetics. This work demonstrates a successful method for constructing efficient and stable photoanodes as well as diversifying the application of MXene in photoelectrocatalysis.     

Interpretation of Mott–Schottky plots of photoanodes for water splitting

A large body of literature reports that both bismuth vanadate and haematite photoanodes are semiconductors with an extremely high doping density between 10¹⁸ and 10²¹ cm⁻³. Such values are obtained from Mott–Schottky plots by assuming that the measured capacitance is dominated by the capacitance of the depletion layer formed by the doping density within the photoanode. In this work, we show that such an assumption is erroneous in many cases because the injection of electrons from the collecting contact creates a ubiquitous capacitance step that is very difficult to distinguish from that of the depletion layer. Based on this reasoning, we derive an analytical resolution limit that is independent of the assumed active area and surface roughness of the photoanode, below which doping densities cannot be measured in a capacitance measurement. We find that the reported doping densities in the literature lie very close to this value and therefore conclude that there is no credible evidence from capacitance measurements that confirms that bismuth vanadate and haematite photoanodes contain high doping densities.

Electron injection from the contact dominates the Mott–Schottky plots of thin-film photoanodes, rather than the depletion capacitance.     

Enriched Surface Oxygen Vacancies of Photoanodes by Photoetching with Enhanced Charge Separation

A facile photoetching approach is described that alleviates the negative effects from bulk defects by confining the oxygen vacancy (O_vac) at the surface of BiVO₄ photoanode, by 10‐minute photoetching. This strategy could induce enriched O_vac at the surface of BiVO₄, which avoids the formation of excessive bulk defects. A mechanism is proposed to explain the enhanced charge separation at the BiVO₄ /electrolyte interface, which is supported by density functional theory (DFT) calculations. The optimized BiVO₄ with enriched surface O_vac presents the highest photocurrent among undoped BiVO₄ photoanodes. Upon loading FeOOH/NiOOH cocatalysts, photoetched BiVO₄ photoanode reaches a considerable water oxidation photocurrent of 3.0 mA cm^?2 at 0.6 V vs. reversible hydrogen electrode. An unbiased solar‐to‐hydrogen conversion efficiency of 3.5 % is realized by this BiVO₄ photoanode and a Si photocathode under 1 sun illumination.     

Introducing Bidirectional Axial Coordination into BiVO4@Metal Phthalocyanine Core–Shell Photoanodes for Efficient Water Oxidation

Core-shell photoanodes have shown great potential for photoelectrochemical (PEC) water oxidation. However, the construction of a high-quality interface between the core and shell, as well as a highly catalytic surface, remains a challenge. Herein, guided by computation, we present a BiVO₄ photoanode coated with ZnCoFe polyphthalocyanine using pyrazine as a coordination agent. The bidirectional axial coordination of pyrazine plays a dual role by facilitating intimate interfacial contact between BiVO₄ and ZnCoFe polyphthalocyanine, as well as regulating the electron density and spin configuration of metal sites in ZnCoFe phthalocyanine, thereby promoting the potential-limiting step of *OOH desorption. The resulting photoanode displayed a high photocurrent density of 5.7±0.1 mA cm⁻² at 1.23 V_RHE. This study introduces a new approach for constructing core–shell photoanodes, and uncovers the key role of pyrazine axial coordination in modulating the catalytic activity of metal phthalocyanine.     

An Efficient Strategy for Boosting Photogenerated Charge Separation by Using Porphyrins as Interfacial Charge Mediators

Surface recombination at the photoanode/electrolyte junction seriously impedes photoelectrochemical (PEC) performance. Through coating of photoanodes with oxygen evolution catalysts, the photocurrent can be enhanced; however, current systems for water splitting still suffer from high recombination. We describe herein a novel charge transfer system designed with BiVO₄ as a prototype. In this system, porphyrins act as an interfacial‐charge‐transfer mediator, like a volleyball setter, to efficiently suppress surface recombination through higher hole‐transfer kinetics rather than as a traditional photosensitizer. Furthermore, we found that the introduction of a “setter” can ensure a long lifetime of charge carriers at the photoanode/electrolyte interface. This simple interface charge‐modulation system exhibits increased photocurrent density from 0.68 to 4.75 mA cm^?2 and provides a promising design strategy for efficient photogenerated charge separation to improve PEC performance.     

Boosting the photoelectrochemical water oxidation performance of bismuth vanadate by ZnCo2O4 nanoparticles

Due to the involvement of four-electron transfer process at photoanode,water oxidation is the ratelimiting step in water splitting reaction.To settle this dilemma,ZnCo₂ O₄ nanoparticles are combined with BiVO₄ to form a p-n ZnCo₂ O₄/BiVO₄ heterojunction photoanode,which is proved by an input voltage-output current test.The built-in electric field formed within the heterojunction structure promotes the effective separation of elect...     

Determining the role of oxygen vacancies in the photoelectrocatalytic performance of WO3 for water oxidation

Oxygen vacancies are common to most metal oxides, whether intentionally incorporated or otherwise, and the study of these defects is of increasing interest for solar water splitting. In this work, we examine nanostructured WO₃ photoanodes of varying oxygen content to determine how the concentration of bulk oxygen-vacancy states affects the photocatalytic performance for water oxidation. Using transient optical spectroscopy, we follow the charge carrier recombination kinetics in these samples, from picoseconds to seconds, and examine how differing oxygen vacancy concentrations impact upon these kinetics. We find that samples with an intermediate concentration of vacancies (∼2% of oxygen atoms) afford the greatest photoinduced charge carrier densities, and the slowest recombination kinetics across all timescales studied. This increased yield of photogenerated charges correlates with improved photocurrent densities under simulated sunlight, with both greater and lesser oxygen vacancy concentrations resulting in enhanced recombination losses and poorer J–V performances. Our conclusion, that an optimal – neither too high nor too low – concentration of oxygen vacancies is required for optimum photoelectrochemical performance, is discussed in terms of the competing beneficial and detrimental impact these defects have on charge separation and transport, as well as the implications held for other highly doped materials for photoelectrochemical water oxidation.

A medium concentration of oxygen vacancies (V_O ≈ 2%) is critical to the performance of WO₃ photoanodes for solar water oxidation, enhancing charge separation and reducing recombination across all timescales examined.     

Photocatalytic deoxygenation of N–O bonds with rhenium complexes: from the reduction of nitrous oxide to pyridine N-oxides

The accumulation of nitrogen oxides in the environment calls for new pathways to interconvert the various oxidation states of nitrogen, and especially their reduction. However, the large spectrum of reduction potentials covered by nitrogen oxides makes it difficult to find general systems capable of efficiently reducing various N-oxides. Here, photocatalysis unlocks high energy species able both to circumvent the inherent low reactivity of the greenhouse gas and oxidant N₂O (E⁰(N₂O/N₂) = +1.77 V vs. SHE), and to reduce pyridine N-oxides (E_1/2(pyridine N-oxide/pyridine) = −1.04 V vs. SHE). The rhenium complex [Re(4,4′-tBu-bpy)(CO)₃Cl] proved to be efficient in performing both reactions under ambient conditions, enabling the deoxygenation of N₂O as well as synthetically relevant and functionalized pyridine N-oxides.

A rhenium-based photocatalyst enables the deoxygenation of several compounds containing N–O bonds, such as N₂O and pyridine N-oxides.     

Surviving High‐Temperature Calcination: ZrO2‐Induced Hematite Nanotubes for Photoelectrochemical Water Oxidation

Nanotubular Fe₂O₃ is a promising photoanode material, and producing morphologies that withstand high‐temperature calcination (HTC) is urgently needed to enhance the photoelectrochemical (PEC) performance. This work describes the design and fabrication of Fe₂O₃ nanotube arrays that survive HTC for the first time. By introducing a ZrO₂ shell on hydrothermal FeOOH nanorods by atomic layer deposition, subsequent high‐temperature solid‐state reaction converts FeOOH‐ZrO₂ nanorods to ZrO₂‐induced Fe₂O₃ nanotubes (Zr‐Fe₂O₃ NTs). The structural evolution of the hematite nanotubes is systematically explored. As a result of the nanostructuring and shortened charge collection distance, the nanotube photoanode shows a greatly improved PEC water oxidation activity, exhibiting a photocurrent density of 1.5 mA cm⁻² at 1.23 V (vs. reversible hydrogen electrode, RHE), which is the highest among hematite nanotube photoanodes without co‐catalysts. Furthermore, a Co‐Pi decorated Zr‐Fe₂O₃ NT photoanode reveals an enhanced onset potential of 0.65 V (vs. RHE) and a photocurrent of 1.87 mA cm⁻² (at 1.23 V vs. RHE).     

A redox-enabled strategy for intramolecular hydroamination

Metal- or acid-catalyzed intramolecular hydroamination and Cope-type intramolecular hydroamination, a distinct concerted approach using hydroxylamines, typically suffer from significant synthetic limitations. Herein we report a process for intramolecular hydroamination that uses a redox-enabled strategy relying on efficient in situ generation of hydroxylamines by oxidation, followed by Cope-type hydroamination, then reduction of the resulting pyrrolidine N-oxide. The steps are performed sequentially in a single pot, no catalyst is required, the conditions are mild, the process is highly functional group tolerant, and no chromatography is generally required for isolation. A robustness screen and a gram-scale example further support the practicality of this approach.

A redox strategy enables hydroaminations: mild conditions allows efficient hydroxylamine formation & cyclization, then B₂(OH)₄ as reductant also facilitates isolation!     

Biomimetic catalytic aerobic oxidation of C–sp(3)–H bonds under mild conditions using galactose oxidase model compound CuIIL

Developing highly efficient catalytic protocols for C–sp(3)–H bond aerobic oxidation under mild conditions is a long-desired goal of chemists. Inspired by nature, a biomimetic approach for the aerobic oxidation of C–sp(3)–H by galactose oxidase model compound Cu^IIL and NHPI (N-hydroxyphthalimide) was developed. The Cu^IIL–NHPI system exhibited excellent performance in the oxidation of C–sp(3)–H bonds to ketones, especially for light alkanes. The biomimetic catalytic protocol had a broad substrate scope. Mechanistic studies revealed that the Cu^I-radical intermediate species generated from the intramolecular redox process of Cu^IILH₂ was critical for O₂ activation. Kinetic experiments showed that the activation of NHPI was the rate-determining step. Furthermore, activation of NHPI in the Cu^IIL–NHPI system was demonstrated by time-resolved EPR results. The persistent PINO (phthalimide-N-oxyl) radical mechanism for the aerobic oxidation of C–sp(3)–H bond was demonstrated.

A biomimetic catalytic approach for the aerobic oxidation of C–sp(3)–H bonds using galactose oxidase model compound was developed. EPR showed that the Cu^I-radical intermediate species was critical for O₂ activation.     

Adaptive response by an electrolyte: resilience to electron losses in a dye-sensitized porous photoanode

Photovoltage and photocurrents below theoretical limits in dye-sensitized photoelectrochemical solar energy conversion systems are usually attributed to electron loss processes such as dye–electron and electrolyte–electron recombination reactions within the porous photoanode. Whether recombination is a major loss mechanism is examined here, using a multiscale reaction–diffusion computational model to evaluate system characteristics. The dye-sensitized solar cell with an I⁻/I₃⁻ redox couple is chosen as a simple, representative model system because of the extensive information available for it. Two photoanode architectures with dye excitation frequencies spanning 1–25 s⁻¹ are examined, assuming two distinct recombination mechanisms. The simulation results show that although electrolyte–electron reactions are very efficient, they do not significantly impact photoanode performance within the system as defined. This is because the solution-phase electrolyte chemistry plays a key role in mitigating electron losses through coupled reactions that produce I⁻ within the photoanode pores, thereby cycling the electrolyte species without requiring that all electrolyte reduction reactions take place at the more distantly located cathode. This is a functionally adaptive response of the chemistry that may be partly responsible for the great success of this redox couple for dye-sensitized solar cells. The simulation results provide predictions that can be tested experimentally.

Interfacial electrolyte reactions in the pores of a photoanode consume electrons. The losses are offset by compensating solution-phase reactions that generate I⁻ locally, and promote efficient dye cycling and photocurrent generation.     

Amide-bridged conjugated organic polymers: efficient metal-free catalysts for visible-light-driven CO2 reduction with H2O to CO

The visible-light-driven photoreduction of CO₂ to value-added chemicals over metal-free photocatalysts without sacrificial reagents is very interesting, but challenging. Herein, we present amide-bridged conjugated organic polymers (amide-COPs) prepared via self-condensation of amino nitriles in combination with hydrolysis, for the photoreduction of CO₂ with H₂O without any photosensitizers or sacrificial reagents under visible light irradiation. These catalysts can afford CO as the sole carbonaceous product without H₂ generation. Especially, amide-DAMN derived from diaminomaleonitrile exhibited the highest activity for the photoreduction of CO₂ to CO with a generation rate of 20.6 μmol g⁻¹ h⁻¹. Experiments and DFT calculations confirmed cyano/amide groups as active sites for CO₂ reduction and second amine groups for H₂O oxidation, and suggested that superior selectivity towards CO may be attributed to the adjacent redox sites. This work presents a new insight into designing photocatalysts for artificial photosynthesis.

Amino nitrile-derived conjugated organic polymers can realize the photoreduction of CO₂ with water to CO without H₂ generation efficiently.