Highest-Tc single-component homochiral organic ferroelectrics

Organic single-component ferroelectrics with low molecular mass have drawn great attention for application in organic electronics. However, the discovery of high-T_c single-component organic ferroelectrics has been very scarce. Herein, we report a pair of homochiral single-component organic ferroelectrics (R)-10-camphorsulfonylimine and (S)-10-camphorsulfonylimine under the guidance of ferroelectric chiral chemistry. They crystallize in the chiral–polar space group P2₁, and their mirror image relations have been identified using vibrational circular dichroism spectra. They both exhibit 422F2 multiaxial ferroelectricity with T_c as high as 429 K. Besides, they possess superior acoustic impedance characteristics with a value of 2.45 × 10⁶ kg s⁻¹ m⁻², lower than that of PVDF. To our knowledge, enantiomeric (R and S)-10-camphorsulfonylimine show the highest T_c among the known organic single-component ferroelectrics and low acoustic impedance well matching with that of bodily tissues. This work promotes the development of high-performance organic single-component ferroelectrics and is of great inspiration to explore their application in next-generation flexible smart devices.

A pair of enantiomeric organic ferroelectrics (R and S)-10-camphorsulfonylimine show the highest T_c among the known single-component organic ferroelectrics.     

A nickel(ii)-based one-dimensional organic–inorganic halide perovskite ferroelectric with the highest Curie temperature

Organic–inorganic halide perovskites (OIHPs) are very eye-catching due to their chemical tunability and rich physical properties such as ferroelectricity, magnetism, photovoltaic properties and photoluminescence. However, no nickel-based OIHP ferroelectrics have been reported so far. Here, we designed an ABX₃ OIHP ferroelectric (3-pyrrolinium)NiCl₃, where the 3-pyrrolinium cations are located on the voids surrounded by one-dimensional chains composed of NiCl₆-face-sharing octahedra via hydrogen bonding interactions. Such a unique structure enables the (3-pyrrolinium)NiCl₃ with a high spontaneous polarization (P_s) of 5.8 μC cm⁻² and a high Curie temperature (T_c) of 428 K, realizing dramatic enhancement of 112 and 52 K compared to its isostructural (3-pyrrolinium)MCl₃ (M = Cd, Mn). To our knowledge, remarkably, (3-pyrrolinium)NiCl₃ should be the first case of nickel(ii)-based OIHP ferroelectric to date, and its T_c of 428 K (35 K above that of BaTiO₃) is the highest among all reported one-dimensional OIHP ferroelectrics. This work offers a new structural building block for enriching the family of OIHP structures and will inspire the further exploration of new nickel(ii)-based OIHP ferroelectrics.

Organic–inorganic halide perovskites (OIHPs) are very eye-catching due to their chemical tunability and rich physical properties such as ferroelectricity, magnetism, photovoltaic properties and photoluminescence.     

An organic plastic ferroelectric with high Curie point

Plastic ferroelectrics, featuring large entropy changes in phase transitions, hold great potential application for solid-state refrigeration due to the electrocaloric effect. Although conventional ceramic ferroelectrics (e.g., BaTiO₃ and KNbO₃) have been widely investigated in the fields of electrocaloric material and catalysis, organic plastic ferroelectrics with a high Curie point (T_c) are rarely reported but are of great importance for the sake of environmental protection. Here, we reported an organic plastic ferroelectric, (−)-camphanic acid, which crystallizes in the P2₁ space group, chiral polar 2 (C₂) point group, at room temperature. It undergoes plastic paraelectric-to-ferroelectric phase transition with the Aizu notation of 23F2 and high T_c of 414 K, showing large entropy gain (ΔS_t = 48.2 J K⁻¹ mol⁻¹). More importantly, the rectangular polarization–electric field (P–E) hysteresis loop was recorded on the thin film samples with a large saturated polarization (P_s) of 5.2 μC cm⁻². The plastic phase transition is responsible for its multiaxial ferroelectric feature. This work highlights the discovery of organic multiaxial ferroelectrics driven by the motive of combining chirality and plastic phase transition, which will extensively promote the practical application of such unique functional materials.

An organic plastic ferroelectric, (−)-Camphanic acid, shows multiaxial ferroelectric feature and large entropy gain during the phase transition.     

A multifunctional molecular ferroelectric with chiral features,a high Curie temperature,large spontaneous polarization and photoluminescence: (C9H14N)2CdBr4

Low-dimensional chiral organic–inorganic hybrid metal halides have attracted a lot of attention in recent years due to their unique intrinsic properties, including having potential applications in optoelectronic and spintronic devices. However, low-dimensional chiral molecular ferroelectrics are very rare. In this paper, we report a novel zero-dimensional molecular ferroelectric (C₉H₁₄N)₂CdBr₄ (C₉H₁₄N⁺ = protonated 3-phenylpropylamine), which has obvious dielectric and thermal anomalies and shows a high Curie temperature at 395 K. It crystallizes in the P2₁ space group at room temperature, showing a strong CD signal, large spontaneous polarization (P_s = 13.5 μC cm⁻²), and a clear ferroelectric domain. In addition, it also exhibits a flexible SHG response. The photoluminescence spectrum shows that 1 has broadband luminescence. At the same time, compound 1 has a wide band gap, which is mainly contributed to by the inorganic CdBr₄ tetrahedron. The high tunability of low-dimensional chiral molecular ferroelectrics also opens up a way to explore multifunctional chiral materials.

A novel molecular ferroelectric (C₉H₁₄N)₂CdBr₄ with high Curie temperature (T_c = 395 K), strong CD signal, large spontaneous polarization, clear ferroelectric domain and fluorescence characteristics.     

Water oxidation by a dye-catalyst diad in natural sunlight: timing and coordination of excitations and reactions across timescales of picoseconds to hours

The mechanisms of how dyes and catalysts for solar-driven transformations such as water oxidation to form O₂ work have been intensively investigated, however little is known about how their independent photophysical and chemical processes work together. The level of coordination between the dye and the catalyst in time determines the overall water oxidation system''s efficiency. In this computational stochastic kinetics study, we have examined coordination and timing for a Ru-based dye-catalyst diad, [P2Ru(4-mebpy-4′-bimpy)Ru(tpy)(OH₂)]⁴⁺, where P2 is 4,4′-bisphosphonato-2,2′-bipyridine, 4-mebpy-4′-bimpy is 4-(methylbipyridin-4′-yl)-N-benzimid-N′-pyridine, a bridging ligand, and tpy is (2,2′:6′,2′′-terpyridine), taking advantage of the extensive data available for both dye and catalyst, and direct studies of the diads bound to a semiconductor surface. The simulation results for both ensembles of diads and single diads show that progress through the generally accepted water oxidation catalytic cycle is not controlled by the relatively low flux of solar irradiation or by charge or excitation losses, rather is gated by buildup of intermediates whose chemical reactions are not accelerated by photoexcitations. The stochastics of these thermal reactions govern the level of coordination between the dye and the catalyst. This suggests that catalytic efficiency can be improved in these multiphoton catalytic cycles by providing a means for photostimulation of all intermediates so that the catalytic rate is governed by charge injection under solar illumination alone.

Excitations and reactions in a dye−catalyst dyad for solar-driven water oxidation have timing mismatches caused by the stochastics of some catalytic steps. Rather than being perfectly meshed, these processes are like gears with missing teeth.     

A Modular Approach to Atropisomeric Bisphosphines of Diversified Electronic Density on Phosphorus Atoms

The series of C₂-symmetric biaryl core-based non-racemic bisphosphines possessing substituents of different electronic properties: both EDG and EWG were obtained in a short sequence of good yielding transformations, started from commercial 1,3-dimethyl-2-nitrobenzene. Several different approaches leading to the desirable ligands were practically evaluated. Notably, the synthesis of the entire series of ligands could be performed with the utilization of a single early-stage precursor DIDAB (6,6′-diiodo-2,2′,4,4′-tetramethylbiphenyl-3,3′-diamine), which could be easily obtained in enantiomerically pure form. The obtained compounds at concentrations of 50 and 200 µM showed various biological activity against normal human dermal fibroblast, ranging from inactivity through time-dependent action and ending up with high toxicity.     

Coexistence of magnetic and electric orderings in a divalent Cr2+-based multiaxial molecular ferroelectric

Multiferroic materials have attracted great interest because of their underlying new science and promising applications in data storage and mutual control devices. However, they are still very rare and highly imperative to be developed. Here, we report an organic–inorganic hybrid perovskite trimethylchloromethylammonium chromium chloride (TMCM–CrCl₃), showing the coexistence of magnetic and electric orderings. It displays a paraelectric–ferroelectric phase transition at 397 K with an Aizu notation of 6/mFm, and spin-canted antiferromagnetic ordering with a Néel temperature of 4.8 K. The ferroelectricity originates from the orientational ordering of TMCM cations, and the magnetism is from the [CrCl₃]⁻ framework. Remarkably, TMCM–CrCl₃ is the first experimentally confirmed divalent Cr²⁺-based multiferroic material as far as we know. A new category of hybrid multiferroic materials is pointed out in this work, and more Cr²⁺-based multiferroic materials will be expectedly developed in the future.

An organic–inorganic hybrid perovskite Trimethylchloromethylammonium chromium(ii) chloride (TMCM–CrCl₃) can simultaneously show excellent ferroelectricity and antiferromagnetism, which is the first experimentally confirmed Cr²⁺-based multiferroic material.     

A Molecular Thermochromic Ferroelectric

Molecular ferroelectrics have attracted considerable interests because of their easy and environmentally friendly processing, low acoustical impedance and mechanical flexibility. Herein, a molecular thermochromic ferroelectric, N,N′‐dimethyl‐1,4‐diazoniabicyclo[2.2.2]octonium tetrachlorocuprate(II) ([DMe‐DABCO]CuCl₄) is reported, which shows both excellent ferroelectricity and intriguing thermochromism. [DMe‐DABCO]CuCl₄ undergoes a ferroelectric phase transition from Pca2₁ to Pbcm at a significantly high Curie temperature of 413 K, accompanied by a color change from yellow to red that is due to the remarkable deformation of [CuCl₄]^2? tetrahedron, where the ferroelectric and paraelectric phases correspond to yellow and red, respectively. Combined with multiple bistable physical properties, [DMe‐DABCO]CuCl₄ would be a promising candidate for next‐generation smart devices, and should inspire further exploration of multifunctional molecular ferroelectrics.     

Unexpected effect of catalyst concentration on photochemical CO2 reduction by trans(Cl)–Ru(bpy)(CO)2Cl2: new mechanistic insight into the CO/HCOO– selectivity

Photochemical CO₂ reduction catalysed by trans(Cl)–Ru(bpy)(CO)₂Cl₂ (bpy = 2,2′-bipyridine) efficiently produces carbon monoxide (CO) and formate (HCOO^–) in N,N-dimethylacetamide (DMA)/water containing [Ru(bpy)₃]²⁺ as a photosensitizer and 1-benzyl-1,4-dihydronicotinamide (BNAH) as an electron donor. We have unexpectedly found catalyst concentration dependence of the product ratio (CO/HCOO^–) in the photochemical CO₂ reduction: the ratio of CO/HCOO^– decreases with increasing catalyst concentration. The result has led us to propose a new mechanism in which HCOO^– is selectively produced by the formation of a Ru(i)–Ru(i) dimer as the catalyst intermediate. This reaction mechanism predicts that the Ru–Ru bond dissociates in the reaction of the dimer with CO₂, and that the insufficient electron supply to the catalyst results in the dominant formation of HCOO^–. The proposed mechanism is supported by the result that the time-course profiles of CO and HCOO^– in the photochemical CO₂ reduction catalysed by [Ru(bpy)(CO)₂Cl]₂ (0.05 mM) are very similar to those of the reduction catalysed by trans(Cl)–Ru(bpy)(CO)₂Cl₂ (0.10 mM), and that HCOO^– formation becomes dominant under low-intensity light. The kinetic analyses based on the proposed mechanism could excellently reproduce the unusual catalyst concentration effect on the product ratio. The catalyst concentration effect observed in the photochemical CO₂ reduction using [Ru(4dmbpy)₃]²⁺ (4dmbpy = 4,4′-dimethyl-2,2′-bipyridine) instead of [Ru(bpy)₃]²⁺ as the photosensitizer is also explained with the kinetic analyses, reflecting the smaller quenching rate constant of excited [Ru(4dmbpy)₃]²⁺ by BNAH than that of excited [Ru(bpy)₃]²⁺. We have further synthesized trans(Cl)–Ru(6Mes-bpy)(CO)₂Cl₂ (6Mes-bpy = 6,6′-dimesityl-2,2′-bipyridine), which bears bulky substituents at the 6,6′-positions in the 2,2′-bipyridyl ligand, so that the ruthenium complex cannot form the dimer due to the steric hindrance. We have found that this ruthenium complex selectively produces CO, which strongly supports the catalytic mechanism proposed in this work.     

Green Preparation of Antimicrobial 1D-Coordination Polymers: [Zn(4,4′-bipy)Cl2]∞ and [Zn(4,4′-bipy)2(OAc)2]∞ by Ultrasonication of Zn(II) Salts and 4,4′-Bipyridine

We report on the green preparation of one-dimensional metal coordination polymers by sonochemical approach. The spacer ligand 4,4′-bipyridine was ultrasonicated with chloride or acetate zinc salts to obtain [Zn(4,4′-bipy)Cl₂]_∞ and [Zn(4,4′-bipy)₂(OAc)₂]_∞, respectively. Benign solvents such as ethanol and water were selected as reaction media, and the synthesis took place in a few minutes—a very short time compared to conventional methods where some days’ synthesis is required. X-ray powder diffraction, Fourier transform infrared spectroscopy, thermal analysis (thermogravimetric and differential scanning calorimetry), and CHN techniques investigated the influence of using different reaction solvents on the chemical, structural, and thermal properties of the final products. The 1D [Zn(4,4′-bipy)Cl₂]_∞ and [Zn(4,4′-bipy)₂(OAc)₂]_∞ polymers, in agreement with the structures reported in the literature, were obtained in the form of nanocrystals with an average crystal size around 100 nm. As a proof of concept, a set of Gram-positive (Staphylococcus aureus) and Gram-negative bacteria (Klebsiella pneumoniae), and three yeast strains (Candida albicans, Candida krusei, Candida glabrata) were tested to evaluate the antimicrobial activity of the coordination polymers, following the Kirby–Bauer procedure and microplate dilution method. Thus, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and minimal biofilm inhibitory concentration (MBIC) were evaluated. Except for Candida krusei, the compounds showed an appreciable antimicrobial and antibiofilm activity against these strains grown in the liquid medium.     

Structure–Property Relationship of Supramolecular Ferroelectric [H‐66dmbp][Hca] Accompanied by High Polarization,Competing Structural Phases,and Polymorphs

Three polymorphic forms of 6,6′‐dimethyl‐2,2′‐bipyridinium chloranilate crystals were characterized to understand the origin of polarization properties and the thermal stability of ferroelectricity. According to the temperature‐dependent permittivity, differential scanning calorimetry, and X‐ray diffraction, structural phase transitions were found in all polymorphs. Notably, the ferroelectric α‐form crystal, which has the longest hydrogen bond (2.95 Å) among the organic acid/base‐type supramolecular ferroelectrics, transformed from a polar structure (space group, P2₁) into an anti‐polar structure (space group, P2₁/c) at 378 K. The non‐ferroelectric β‐ and γ‐form crystals also exhibited structural rearrangements around hydrogen bonds. The hydrogen‐bonded geometry and ferroelectric properties were compared with other supramolecular ferroelectrics. A positive relationship between the phase‐transition temperature (T_C) and hydrogen‐bond length (<d>) was observed, and was attributed to the potential barrier height for proton off‐centering or order/disorder phenomena. The optimized spontaneous polarization (P_s) agreed well with the results of the first‐principles calculations, and could be amplified by separating the two equilibrium positions of protons with increasing <d>. These data consistently demonstrated that stretching <d> is a promising way to enhance the polarization performance and thermal stability of hydrogen‐bonded organic ferroelectrics.     

Pt(ii)-coordinated tricomponent self-assemblies of tetrapyridyl porphyrin and dicarboxylate ligands: are they 3D prisms or 2D bow-ties?

Thermodynamically favored simultaneous coordination of Pt(ii) corners with aza- and carboxylate ligands yields tricomponent coordination complexes with sophisticated structures and functions, which require careful structural characterization to paint accurate depiction of their structure–function relationships. Previous reports claimed that heteroleptic coordination of cis-(Et₃P)₂Pt^II with tetrapyridyl porphyrins (M′TPP, M′ = Zn or H₂) and dicarboxylate ligands (XDC) yielded 3D tetragonal prisms containing two horizontal M′TPP faces and four vertical XDC pillars connected by eight Pt(ii) corners, even though such structures were not supported by their ¹H NMR data. Through extensive X-ray crystallographic and NMR studies, herein, we demonstrate that self-assembly of cis-(Et₃P)₂Pt^II, M′TPP, and four different XDC linkers having varied lengths and rigidities actually yields bow-tie (⋈)-shaped 2D [{cis-(Et₃P)₂Pt}₄(M′TPP) (XDC)₂]⁴⁺ complexes featuring a M′TPP core and two parallel XDC linkers connected by four heteroleptic Pt^II corners instead of 3D prisms. This happened because (i) irrespective of their length (∼7–11 Å) and rigidity, the XDC linkers intramolecularly bridged two adjacent pyridyl-N atoms of a M′TPP core via Pt^II corners instead of connecting two cofacial M′TPP ligands and (ii) bow-tie complexes are entropically favored over prisms. The electron-rich ZnTPP core of a representative bow-tie complex selectively formed a charge-transfer complex with highly π-acidic 1,4,5,8,9,12-hexaazatriphenylene-2,3,6,7,10,11-heaxacarbonitrile but not with a π-donor such as pyrene. Thus, this work not only produced novel M′TPP-based bow-tie complexes and demonstrated their selective π-acid recognition capability, but also underscored the importance of proper structural characterization of supramolecular assemblies to ensure accurate depiction of their structure–property relationships.

Thermodynamically favored heteroleptic coordination of Pt(ii) corners with tetrapyridyl porphyrins and dicarboxylate ligands produces 2D bow-tie shaped complexes instead of previously mischaracterized 3D tetragonal prisms.     

A redox-mediator pathway for enhanced multi-colour electrochemiluminescence in aqueous solution

The classic and most widely used co-reactant electrochemiluminescence (ECL) reaction of tris(2,2′-bipyridine)ruthenium(ii) ([Ru(bpy)₃]²⁺) and tri-n-propylamine is enhanced by an order of magnitude by fac-[Ir(sppy)₃]³⁻ (where sppy = 5′-sulfo-2-phenylpyridinato-C²,N), through a novel ‘redox mediator’ pathway. Moreover, the concomitant green emission of [Ir(sppy)₃]³⁻* enables internal standardisation of the co-reactant ECL of [Ru(bpy)₃]²⁺. This can be applied using a digital camera as the photodetector by exploiting the ratio of R and B values of the RGB colour data, providing superior sensitivity and precision for the development of low-cost, portable ECL-based analytical devices.

A water-soluble Ir(iii) complex is shown to enhance the ‘remote’ mechanism of the most widely used co-reactant ECL reaction of tris(2,2′-bipyridine)ruthenium(ii) with tripropylamine.     

Hexafluoroisobutylation of enolates through a tandem elimination/allylic shift/hydrofluorination reaction

The isobutyl side chain is a highly prevalent hydrophobic group in drugs, and it notably constitutes the side chain of leucine. Its replacement by a hexafluorinated version containing two CF₃ groups may endow the target compound with new and advantageous properties, yet this modification remains overlooked due to the absence of a general and practical synthetic methodology. Herein, we report the first general method to introduce the hexafluoroisobutyl group into ketoesters, malonates, 1,3-diketones, Schiff base esters and malononitrile. We demonstrated that the reaction occurs through an elimination/allylic shift/hydrofluorination cascade process which efficiently overcomes the usual fluoride β-elimination observed with α-CF₃-vinyl groups. We showed that with alkali metal bases, a pentafluorinated alkene is obtained predominantly, whereas the use of tetrabutylammonium fluoride (TBAF) allows hydrofluorination to occur. This tandem process represents a conceptually new pathway to synthesize bis-trifluoromethylated compounds. This methodology was applied to the multigram-scale synthesis of enantiopure (S)-5,5,5,5′,5′,5′-hexafluoroleucine.

Hexafluoroisobutylation of ketoesters, malonates, diketones, Schiff base esters and malononitrile is reported. The reaction involves an elimination/allylic shift/hydrofluorination cascade process that efficiently overcomes the usual S_N2′ mechanism.     

A bis(silylene)pyridine pincer ligand can stabilize mononuclear manganese(0) complexes: facile access to isolable analogues of the elusive d7-Mn(CO)5 radical

Using the potentially tridentate N,N′-bis(N-heterocyclic silylene)pyridine [SiNSi] pincer-type ligand, 2,6-N,N′-diethyl-bis[N,N′-di-tert-butyl(phenylamidinato)silylene] diaminopyridine, led to the first isolable bis(silylene)pyridine-stabilized manganese(0) complex, {κ³-[SiNSi]Mn(dmpe)} 4 (dmpe = (Me₂P)₂C₂H₄), which represents an isolobal 17 VE analogue of the elusive Mn(CO)₅ radical. The compound is accessible through the reductive dehalogenation of the corresponding dihalido (SiNSi)Mn(ii) complexes 1 (Cl) and 2 (Br) with potassium graphite. Exposing 4 towards the stronger π-acceptor ligands CO and 2,6-dimethylphenyl isocyanide afforded the related Mn(0) complexes κ²-[SiNSi]Mn(CO)₃ (5) and κ³-[SiNSi]Mn(CNXylyl)₂(κ¹-dmpe) (6), respectively. Remarkably, the stabilization of Mn(0) in the coordination sphere of the [SiNSi] ligand favors the d⁷ low-spin electronic configuration, as suggested by EPR spectroscopy, SQUID measurements and DFT calculations. The suitability of 4 acting as a superior pre-catalyst in regioselective hydroboration of quinolines has also been demonstrated.

An isolable bis(silylene)pyridine stabilized manganese(0) complex {κ³-[SiNSi]Mn(dmpe)}, isolobal to elusive Mn(CO)₅ radical has been synthesized and fully characterised.     

Entropy directs the self-assembly of supramolecular palladium coordination macrocycles and cages

The self-assembly of palladium-based cages is frequently rationalized via the cumulative enthalpy (ΔH) of bonds between coordination nodes (M, i.e., Pd) and ligand (L) components. This focus on enthalpic rationale limits the complete understanding of the Gibbs free energy (ΔG) for self-assembly, as entropic (ΔS) contributions are overlooked. Here, we present a study of the M₂^linL₃ intermediate species (M = dinitrato(N,N,N′,N′-tetramethylethylenediamine)palladium(ii), ^linL = 4,4′-bipyridine), formed during the synthesis of triangle-shaped (M₃^linL₃) and square-shaped (M₄^linL₄) coordination macrocycles. Thermochemical analyses by variable temperature (VT) ¹H-NMR revealed that the M₂^linL₃ intermediate exhibited an unfavorable (relative) ΔS compared to M₃^linL₃ (triangle, ΔTΔS = +5.22 kcal mol⁻¹) or M₄^linL₄ (square, ΔTΔS = +2.37 kcal mol⁻¹) macrocycles. Further analysis of these constructs with molecular dynamics (MD) identified that the self-assembly process is driven by ΔG losses facilitated by increases in solvation entropy (ΔS_solv, i.e., depletion of solvent accessible surface area) that drives the self-assembly from “open” intermediates toward “closed” macrocyclic products. Expansion of our computational approach to the analysis of self-assembly in Pd_n^benL_2n cages (^benL = 4,4''-(5-ethoxy-1,3-phenylene)dipyridine), demonstrated that ΔS_solv contributions drive the self-assembly of both thermodynamic cage products (i.e., Pd₁₂^benL₂₄) and kinetically-trapped intermediates (i.e., Pd₈^cL₁₆).

These studies demonstrate that ΔS drives the self-assembly of supramolecular palladium-based coordination macrocycles and cages. As this ΔS contribution arises from solvation, these findings broadly reflect the thermodynamic drive of self-assembly to form compact structures.     

A cooperative adsorbent for the switch-like capture of carbon dioxide from crude natural gas

Natural gas constitutes a growing share of global primary energy due to its abundant supply and lower CO₂ emission intensity compared to coal. For many natural gas reserves, CO₂ contamination must be removed at the wellhead to meet pipeline specifications. Here, we demonstrate the potential of the diamine-appended metal–organic framework ee-2–Mg₂(dobpdc) (ee-2 = N,N-diethylethylenediamine; dobpdc⁴⁻ = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate) as a next-generation CO₂ capture material for high-pressure natural gas purification. Owing to a cooperative adsorption mechanism involving formation of ammonium carbamate chains, ee-2–Mg₂(dobpdc) can be readily regenerated with a minimal change in temperature or pressure and maintains its CO₂ capacity in the presence of water. Moreover, breakthrough experiments reveal that water enhances the CO₂ capture performance of ee-2–Mg₂(dobpdc) by eliminating “slip” of CO₂ before full breakthrough. Spectroscopic characterization and multicomponent adsorption isobars suggest that the enhanced performance under humid conditions arises from preferential stabilization of the CO₂-inserted phase in the presence of water. The favorable performance of ee-2–Mg₂(dobpdc) is further demonstrated through comparison with a benchmark material for this separation, zeolite 13X, as well as extended pressure cycling. Overall, these results support continued development of ee-2–Mg₂(dobpdc) as a promising adsorbent for natural gas purification.

Diamine-appended metal–organic frameworks can be optimized as adsorbents for pressure-swing purification of crude natural gas. A cooperative CO₂ binding mechanism enables high CO₂ swing capacities and enhanced performance under humid conditions.     

Selective separation of planar and non-planar hydrocarbons using an aqueous Pd6 interlocked cage

Polycyclic aromatic hydrocarbons (PAHs) find multiple applications ranging from fabric dyes to optoelectronic materials. Hydrogenation of PAHs is often employed for their purification or derivatization. However, separation of PAHs from their hydrogenated analogues is challenging because of their similar physical properties. An example of such is the separation of 9,10-dihydroanthracene from phenanthrene/anthracene which requires fractional distillation at high temperature (∼340 °C) to obtain pure anthracene/phenanthrene in coal industry. Herein we demonstrate a new approach for this separation at room temperature using a water-soluble interlocked cage (1) as extracting agent by host–guest chemistry. The cage was obtained by self-assembly of a triimidazole donor L·HNO₃ with cis-[(tmeda)Pd(NO₃)₂] (M) [tmeda = N,N,N′,N′-tetramethylethane-1,2-diamine]. 1 has a triply interlocked structure with an inner cavity capable of selectively binding planar aromatic guests.

We report here a triply interlocked cage with the ability to encapsulate planar guests in aqueous medium. This property was then employed to efficiently separate planar and non-planar aromatic hydrocarbons by aqueous extraction.     

NickelII-catalyzed asymmetric photoenolization/Mannich reaction of (2-alkylphenyl) ketones

A diastereo- and enantioselective photoenolization/Mannich (PEM) reaction of ortho-alkyl aromatic ketones with benzosulfonimides was established by utilizing a chiral N,N′-dioxide/Ni(OTf)₂ complex as the Lewis acid catalyst. It afforded a series of benzosulfonamides and the corresponding ring-closure products, and a reversal of diastereoselectivity was observed through epimerization of the benzosulfonamide products under continuous irradiation. On the basis of the control experiments, the role of the additive LiNTf₂ in achieving high stereoselectivity was elucidated. This PEM reaction was proposed to undergo a direct nucleophilic addition mechanism rather than a hetero-Diels–Alder/ring-opening sequence. A possible transition state model with a photoenolization process was proposed to explain the origin of the high level of stereoinduction.

A diastereo- and enantioselective photoenolization/Mannich (PEM) reaction of (2-alkylphenyl) ketones with benzosulfonimides is realized by a chiral N,N′-dioxide/Ni^II complex catalyst.     

Ion polarisation-assisted hydrogen-bonded ferroelectrics in liquid crystalline domains

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal. The introduction of simple M⁺X⁻ salts such as Na⁺PF₆⁻ and K⁺I⁻ into the ionic channel of 1 enhanced the ionic conductivity of the Col_h phase of the M⁺·(1)·X⁻ salts, with the highest ionic conductivity reaching ∼10⁻⁶ S cm⁻¹ for K⁺·(1)·I⁻ and Na⁺·(1)·PF₆⁻ at 460 K, which was approximately 5 orders of magnitude higher than that of 1. The introduction of non-ferroelectric 1 into the ferroelectric N,N′,N′′-tri(tetradecyl)-1,3,5-benzenetricarboxamide (3BC) elicited a ferroelectric response from the mixed Col_h phase of (3BC)_x(1)_1−x with x = 0.9 and 0.8. The further doping of M⁺X⁻ into the ferroelectric Col_h phase of (3BC)_0.9(1)_0.1 enhanced the ferroelectric polarisation assisted by ion displacement in the half-filled ionic channel for the vacant dibenzo[18]crown-6 of (3BC)_0.9[(M⁺)_0.5·(1)·(X⁻)_0.5]_0.1.

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal.