Principles of melting in hybrid organic–inorganic perovskite and polymorphic ABX3 structures

Four novel dicyanamide-containing hybrid organic–inorganic ABX₃ structures are reported, and the thermal behaviour of a series of nine perovskite and non-perovskite [AB(N(CN)₂)₃] (A = (C₃H₇)₄N, (C₄H₉)₄N, (C₅H₁₁)₄N; B = Co, Fe, Mn) is analyzed. Structure–property relationships are investigated by varying both A-site organic and B-site transition metal cations. In particular, increasing the size of the A-site cation from (C₃H₇)₄N → (C₄H₉)₄N → (C₅H₁₁)₄N was observed to result in a decrease in T_m through an increase in ΔS_f. Consistent trends in T_m with metal replacement are observed with each A-site cation, with Co < Fe < Mn. The majority of the melts formed were found to recrystallise partially upon cooling, though glasses could be formed through a small degree of organic linker decomposition. Total scattering methods are used to provide a greater understanding of the melting mechanism.

Increasing the size of the A-site cation from (C₃H₇)₄N → (C₄H₉)₄N → (C₅H₁₁)₄N in hybrid organic–inorganic ABX₃ structures was observed to result in a decrease in T_m, through an increase in ΔS_f.     

Predictions of moiré excitons in twisted two-dimensional organic–inorganic halide perovskites

Recent breakthrough in synthesizing arbitrary vertical heterostructures of Ruddlesden–Popper (RP) perovskites opens doors to myriad quantum optoelectronic applications. However, it is not clear whether moiré excitons and flat bands can be formed in such heterostructures. Here, we predict from first principles that twisted homobilayers of RP perovskite, MA₂PbI₄, can host moiré excitons and yield flat energy bands. The moiré excitons exhibit unique and hybridized characteristics with electrons confined in a single layer of a striped distribution while holes localized in both layers. Nearly flat valence bands can be formed in the bilayers with relatively large twist angles, thanks to the presence of hydrogen bonds that strengthen the interlayer coupling. External pressures can further increase the interlayer coupling, yielding more localized moiré excitons and flatter valence bands. Finally, electrostatic gating is predicted to tune the degree of hybridization, energy, position and localization of moiré excitons in twisted MA₂PbI₄ bilayers.

Excitonic states in twisted MA₂PbI₄ bilayers were calculated by first-principles calculations.     

A nickel(ii)-based one-dimensional organic–inorganic halide perovskite ferroelectric with the highest Curie temperature

Organic–inorganic halide perovskites (OIHPs) are very eye-catching due to their chemical tunability and rich physical properties such as ferroelectricity, magnetism, photovoltaic properties and photoluminescence. However, no nickel-based OIHP ferroelectrics have been reported so far. Here, we designed an ABX₃ OIHP ferroelectric (3-pyrrolinium)NiCl₃, where the 3-pyrrolinium cations are located on the voids surrounded by one-dimensional chains composed of NiCl₆-face-sharing octahedra via hydrogen bonding interactions. Such a unique structure enables the (3-pyrrolinium)NiCl₃ with a high spontaneous polarization (P_s) of 5.8 μC cm⁻² and a high Curie temperature (T_c) of 428 K, realizing dramatic enhancement of 112 and 52 K compared to its isostructural (3-pyrrolinium)MCl₃ (M = Cd, Mn). To our knowledge, remarkably, (3-pyrrolinium)NiCl₃ should be the first case of nickel(ii)-based OIHP ferroelectric to date, and its T_c of 428 K (35 K above that of BaTiO₃) is the highest among all reported one-dimensional OIHP ferroelectrics. This work offers a new structural building block for enriching the family of OIHP structures and will inspire the further exploration of new nickel(ii)-based OIHP ferroelectrics.

Organic–inorganic halide perovskites (OIHPs) are very eye-catching due to their chemical tunability and rich physical properties such as ferroelectricity, magnetism, photovoltaic properties and photoluminescence.     

Development of new high transparent hybrid organic–inorganic monoliths with surface engraved diffraction pattern

Flexible hybrid xerogels bringing together high optical transparency up to 96%, low shrinkage down to 5.5%, very smooth surface (average roughness of about 0.3 nm) and thermal stability up to 200 °C were achieved as a result of the optimization of sol‐gel preparative method and a new combination of sol‐gel precursors. Two types of hybrid materials (hereafter referred, respectively, as urea‐silicate and amino‐alcohol‐silicate gels) were synthesized in this work. The shrinkage and the transparency of these materials have been drastically improved by using two different derived siloxanes (3‐isocyanate propyltriethoxysilane and 3‐glycidoxypropyltrimethoxysilane) and two amine‐terminated polyether precursors with different molecular weights. A drying process was implemented to minimize yellowing of prepared samples. Under these conditions, we were able to efficiently reproduce a well‐defined imprinted pattern at materials surface by using an original casting mould. The study of the diffraction characteristics of the obtained grating revealed a good reproducibility of the imprinted grating that shows to be comparable with the original mould. The developed methodology opens the possibility to produce diffraction lenses with a wide range of forms by a simple method based on sol‐gel process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis,characterization, and permeability evaluation of hybrid organic–inorganic films

The preparation and characterization of hybrid organic–inorganic films based on poly(dimethylsiloxane), PDMS, crosslinked with nanoclusters obtained from pentaerythrithol triacrylate (PETA) and 2‐aminoethyl‐3‐aminopropyltrimethoxysilane (AS), are reported. The introduction of silica nanoclusters, obtained from tetraethoxysilane as an additional crosslinker, improved the mechanical stability of the films and also produced a noticeable decrease in the solvent sorption and in the distance between the nodes of the polymeric networks. The performance of these films as membranes for gas separation processes was similar to those reported for commercial PDMS, although they presented polar organic PETA/AS crosslinker nuclei. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4281–4292, 2004     

Preparation and characters of hyperbranched polyester‐based organic‐inorganic hybrid material compared with linear polyester

To compare the properties of hyperbranched polymers with linear oligomers for preparing organic‐inorganic hybrids, hyperbranched aliphatic polyester (Boltorn^TM H20) and linear polyester hexa‐acrylate (EB830) were selected as organic components for preparing UV‐curable transparent hybrid materials using 3‐(trimethoxysilyl) propylmethacrylate as a coupling agent via a sol‐gel process. The prehydrolyzed product of tetraethoxysilane was used as an inorganic component. The effects of inorganic content on the morphologies, thermal behaviors, photopolymerizaiton kinetics and mechanical properties of the hybrids were investigated. The results show that for hyperbranched polyester‐based hybrids, the organic phase shows much better compatibility with inorganic phase even at high inorganic component content due to its special spheral shape and plenty of functional end groups, compared with linear EB830‐based hybrids. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis and photophysical properties of novel organic–inorganic hybrid materials covalently linked to a europium complex

A novel sol–gel derived hybrid material (classed as Eu-DBM-Si) covalently grafted with Eu(DBM-OH)₃·2H₂O (where DBM-OH = o-hydroxydibenzoylmethane) was prepared through the primary β-diketone ligand DBM-OH. All the synthesized ligands were characterized by ¹H NMR, elemental analyses and Fourier transform infrared spectra (FTIR). The resultant Eu-DBM-Si material exhibited good transparent and homogenous property. Compared to the Eu-DBM hybrid prepared by physically doped silicon dioxide with Eu(DBM-OH)₃·2H₂O, the Eu-DBM-Si hybrid presented more efficient ligand-to-Eu³⁺ energy transfer and a significant improvement in the measured emission quantum yield. Furthermore, the photophysical properties of these hybrid materials, such as the photoluminescence (PL) spectra, PL intensities, symmetry properties, lifetime decays, and Judd-Ofelt parameters were also investigated in detail.     

2,4,6-Trimethylpyridinium perchlorate: Polar properties and correlations with molecular structure of organic–inorganic hybrid crystal

[(CH₃)₃C₅H₂NH][ClO₄] has been synthesized and characterized by X-ray (at 344, 245, 180 and 115 K), calorimetric, dilatometric, dielectric and pyroelectric measurements. At room temperature the crystal structure is polar, space group Pmn2₁. It consists of discrete disordered [ClO₄]^- anions and ordered trimethylpyridinium cations giving the 3D network of hydrogen bonds. The compound reveals a rich polymorphism in the solid state. It undergoes four solid–solid phase transitions: from phases I to II at 356/327 K (heating/cooling), II→III at 346/326, III→IV at 226 K and IV→V at 182/170 K. [(CH₃)₃C₅H₂NH][ClO₄] reveals a strong pyroelectric response over a wide temperature region (phases III, IV and V) with the spontaneous polarization changes (ΔP_s) of the order of . The spontaneous polarization is irreversible over all the polar phases, however, the magnitude of the ΔP_s in the vicinity of the phase transitions is characteristic of compounds with the ferroelectric order. The molecular mechanism of the successive phases transitions in the studied crystal is proposed.     

Synthesis and characterization of organic–inorganic hybrid block copolymers containing a fully condensed ladder‐like polyphenylsilsesquioxane

A series of inorganic–organic hybrid block copolymers were synthesized via atom transfer radical polymerization using a fully condensed, ladder‐like structured polyphenylsilsesquioxane end‐functionalized macroinitiator. The inorganic portion, ladder‐like polyphenylsilsesquioxane, was synthesized in a one‐batch, base‐catalyzed system, whereas organic hard and soft monomers, styrene, and n‐butyl acrylate, were polymerized and copolymerized on the ends of the linear, inorganic backbone. Synthesized hybrid diblock, triblock, and random copolymers were characterized by ¹H NMR, ²⁹Si NMR, gel permeation chromatography, static light scattering, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. Hybrid block copolymers were well‐defined with low polydispersity (<1.4) and exhibited enhanced thermal properties in the form of increased glass transition and degradation onset temperatures over their organic analogues.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hydrophilic solid‐phase extraction of melamine with ampholine‐modified hybrid organic–inorganic silica material

In this work, an ampholine‐functionalized hybrid organic–inorganic silica sorbent was successfully used to extract melamine from a milk formula sample by a hydrophilic interaction solid‐phase extraction protocol. Primary factors affecting the extraction efficiency of the material such as extraction solvent, elution solvent, sample loading volume, and elution volume have been thoroughly optimized. Under the optimized hydrophilic solid‐phase extraction conditions, the recoveries of melamine spiked in milk formula samples ranged from 86.2 to 101.8% with relative standard deviations of 4.1–9.4% (n = 3). The limit of detection (S/N = 3) was 0.32 μg/g. The adsorption capacity toward melamine was 30 μg of melamine per grams of sorbent. Due to its simplicity, rapidity and cost effectiveness, the newly developed hydrophilic solid‐phase extraction method should provide a promising tool for daily monitoring of doped melamine in milk formula.     

Application and optimization of organic–inorganic hybrid monolithic capillary electrochromatography for in vivo cefdinir determination with microdialysis

In this study, an organic–inorganic hybrid monolithic capillary column was applied and optimized for the determination of cefdinir in plasma, and the electro‐osmotic flow that usually hinders migration in reverse polarity became a driving force. The Sample used for pharmacokinetic research was collected by microdialysis using phosphate buffer (pH 7.4) as perfusate, and a volume of 60 μL fluid was mixed with 140 μL of acetonitrile. By using a silica‐allyldimethyldodecylammonium monolithic column (100 μm inner diameter, 21 cm effective length and 31.2 cm total length), and a mobile phase consisting of phosphate and acetonitrile (pH 4.5, 50:50, v/v), at a voltage of 20 kV, the analytes were successfully separated with the background within 2.5 min. The detection wavelength was 214 nm. The calibration curve showed a good linearity (r² = 0.9994) over the concentration range of 0.2–50 μg/mL. The proposed method showed good specificity, linearity, sensitivity, precision and recovery, and the introduction of field amplified sample stacking helped to improve the low recovery caused by microdialysis. This method was successfully applied to quantify cefdinir in rat plasma to support a pre‐clinical pharmacokinetic trial.     

Enantiomeric hybrid high-temperature multiaxial ferroelectrics with a narrow bandgap and high piezoelectricity

Ferroelectric semiconductors have sparked growing attention in the field of optoelectronics, due to their unique ferroelectric photovoltaic effect. Recently, substantial efforts have been devoted to the development of ferroelectric semiconductors, including inorganic oxides, organic-inorganic hybrids, and metal-free perovskites. Nevertheless, reports of ferroelectric semiconductors with a bandgap of less than 2 eV have been scarce. Here, in combination with the incorporation of triiodide (I₃⁻) and the introduction of chiral cations, we successfully constructed a pair of enantiomeric organic-inorganic hybrid ferroelectric semiconductors, (S-1,2-DAP·I)₄·I₃·BiI₆ and (R-1,2-DAP·I)₄·I₃·BiI₆ (R/S-1,2-DAP = (R/S)-(–)-1,2-diaminopropane), which possess high-temperature multiaxial ferroelectric phase transition with an Aizu notation of 422F2(s) at 405 K, a narrow bandgap of 1.56 eV comparable to that of CH₃NH₃PbI₃ (∼1.5 eV), and an impressive piezoelectric response (piezoelectric coefficient, d₂₂ of 35 pC/N) on par with PVDF (polyvinylidene fluoride, 30 pC/N). With intriguing attributes, (S-1,2-DAP·I)₄·I₃·BiI₆ and (R-1,2-DAP·I)₄·I₃·BiI₆ exhibit great potential for application of self-power polarized-light detection and piezoelectric sensors.     

Synthesis and optical properties of organic–inorganic hybrid semi‐interpenetrating polymer network gels containing polyfluorenes

Organic–inorganic hybrid semi‐interpenetrating polymer network (semi‐IPN) gels containing polyfluorenes (PFs) are synthesized by hydrosilylation reaction of joint and rod molecules in toluene, where PFs are poly(9,9‐dihexylfluorene‐2,7‐diyl) (PF6) or, poly(9,9‐dioctylfluorene‐2,7‐diyl) (PF8), joint molecules are 1,3,5,7‐tetramethylcyclotetrasiloxane (TMCTS), or 1,3,5,7,9,11,13,15‐octakis(dimethylsilyloxy)pentacyclo‐[9,5,1,1,1,1]octasilsesquioxane (POSS), and rod molecules are 1,5‐hexadiene (HD) or 1,9‐decadiene (DD). The semi‐IPN gels containing low molecular weight PF6 show higher photoluminescence efficiency (?_g) than the toluene solution of PF6L (?_s). The semi‐IPN gels composed of long rod molecule of DD and cubic joint molecule of POSS show the most effective increase in the emission intensity. The emission intensity of PF6L increases as formation of the network in the POSS‐DD semi‐IPN gel. The POSS‐DD semi‐IPN gels containing high molecular weight PF6 and PF8 also show the increase of emission intensity than those of the toluene solutions. The semi‐IPN synthesized in cyclohexane show syneresis and phase separation between network structure and PF chains. The semi‐IPN gels containing PF8 show emission peaks at 450 and 470 nm derived from β‐sheet structure of PF8. A systematic study clears correlation between emission property and network structure and/or composition of semi‐IPN gels. The semi‐IPN gels provide emissive self‐standing soft materials with high efficiency and in a narrow wavelength range emission. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 973–984     

An organic–inorganic hybrid compound containing imidazolium cations and a one‐dimensional lithium hexacyanidocobaltate‐based anionic framework

An organic–inorganic hybrid compound, catena‐poly[bis(3H‐imidazol‐1‐ium) [[tetracyanido‐κ⁴C‐cobalt(III)]‐μ‐cyanido‐κ²C:N‐[diaqualithium(I)]‐μ‐cyanido‐κ²N:C]], {(C₃H₅N₂)₂[CoLi(CN)₆(H₂O)₂]}_n, was synthesized by the reaction of Li₃[Co(CN)₆] with imidazolium chloride in aqueous solution. The compound crystallizes in the monoclinic space group C2/c (data collected at 273 K). In the crystal structure, neighbouring [Co(CN)₆]³⁻ anionic units are linked by Li⁺ cations through the cyanide groups in a trans mode, forming a one‐dimensional zigzag chain structure extending along the c axis. A three‐dimensional supramolecular network is formed through hydrogen‐bonding interactions and is further stabilized by weak CN...π interactions between the cyanide groups and the imidazolium cations.     

Synthesis of organic‐inorganic hybrid gels by means of thiol‐ene and azide‐alkene reactions

Organic–inorganic hybrid gels have been synthesized from a multi‐vinyl functional cyclic siloxane, 1,3,5,7‐tetravinyltetramethylcyclotetrasiloxane (TVMCTS), or a cubic silsesquioxane, octavinyloctasilasesquioxane (PVOSS), and α,ω‐dithiol compounds, 1,6‐hexanedithiol (HDT), 1,10‐decanedithiol (DDT), using thiol‐ene reaction in toluene. The network structure of the resulting gels, mesh size and mesh size distribution, was quantitatively characterized by means of a scanning microscopic light scattering (SMILS). The gels obtained from TVMCTS‐HDT formed homogeneous network structure with 1.5–1.6 nm mesh. Relaxation peaks derived from large clusters and/or micro gels were detected in the SMILS analysis of the TVMCTS‐DDT, PVOSS‐HDT, and PVOSS‐DDT gels besides those from the small meshes. The organic–inorganic hybrid gels were also synthesized from TVMCTS, PVOSS with α,ω‐diazide compounds, 1,6‐hexanediazide (HDA), 1,10‐decanediazide (DDA), using azide‐alkene reaction in toluene. All the gels obtained with the azide‐alkene reaction formed the homogeneous network structure. Enthalpy relaxation at the glass transition of the dried samples was detected by differential scanning calorimetry to study the network uniformity of the original gels. The gels synthesized by the azide‐alkene reaction showed larger enthalpy than the gels synthesized by the thiol‐ene reaction, indicating homogeneous network structure in the former gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2229–2238     

Ionic liquid‐based organic–inorganic hybrid electrolytes: Impact of in situ obtained and dispersed silica

Organic–inorganic hybrid electrolytes based on PEO‐NaTFSI‐ionic liquid (HMIMTFSI)‐silica (in situ production via sol gel process) are being reported in this article. The variation in conductivity with ionic liquid (IL) addition has been explained on the basis of number of free TFSI anions evaluated using ATR‐IR data. The deconvolution of the IR spectra of these hybrid electrolytes has given evidence of ion‐pair formation which has been compared vis‐á‐vis the conductivity variation. The hybrid electrolyte with maximum conductivity comprises the highest number of free imide ions and has lowest glass transition temperature. FESEM has displayed a porous and layered surface morphology with dispersed silica nanoparticles. In addition, the optimized hybrid electrolyte has been compared with 5 wt% (limit of mechanical stability) ex situ silica added composite where the temperature cycling of conductivity has shown that the ex situ dispersed hybrid electrolytes do not retrace their conductivity path contrary to the in situ prepared hybrid electrolytes. This behavior has been explained to be due to the hindrance offered by the ex situ added silica in the recrystallization kinetics of PEO. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 207–218     

Combination of radical and cationic photoprocesses for the single‐step synthesis of organic‐inorganic hybrid films

Nanocomposite materials prepared from radically photocurable hybrid sol–gel precursors have been widely developed within the last decade, especially to devise novel optical devices and coatings. For their synthesis, a preferential route has involved in the successive sol–gel process of acrylate trialkoxysilane precursors followed by radical photopolymerization. In contrast, this work presents an original one‐step synthesis based on the association of two different photoinitiators (PIs) in the same formulation: the photolysis of a hydroxyphenylketone (radical PI) affords polyacrylate chains while that of a diaryl iodonium salt (cationic PI) generates powerful superacids catalyzing the sol–gel reactions of the alkoxy functions. The behavior of methacrylate and acrylate trimethoxysilane precursors was compared to highlight the effect of the organic moiety functionality on the reaction kinetics (Fourier transform infrared spectroscopy) and the film microstructure (¹³C and ²⁹Si solid‐state nuclear magnetic resonance). Interestingly, evidence of local organization in these hybrid films was also given by X‐ray analysis. In a last part, their thermomechanical properties were discussed thoroughly using a range of techniques: DSC, scratch‐resistance test, nanoindentation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4150–4158, 2010     

Comparative characteristics of texture and properties of hybrid organic–inorganic adsorbents functionalized by amine and thiol groups

The structure and texture characteristics of the hybrid organic–inorganic adsorbents, which were obtained by using of two-component systems of “structure-forming agent/trifunctional silane”, are compared as follows: the first component is Si(OC₂H₅)₄ or (C₂H₅O)₃Si–A–Si(OC₂H₅)₃, where A = –(CH₂)₂– or –C₆H₄–; the second one is alkoxysilane with amine (–NH₂, NH, –NH(CH₂)₂NH₂) and thiol (–SH) groups. The adsorbents, derived from TEOS, have more accessible functional groups (2.6–4.2 mmol/g) than xerogels, which are based on bis(triethoxysilanes) (1.0–2.6 mmol/g). On another hand xerogels derived from bis(triethoxysilanes) have a more extended porous structure (S_sp =516–968 m²/g, V_s = 0.418–1.490 cm³/g, d = 2.5–15.0 nm) than those that are based on TEOS (S_sp = 4–631 m²/g, V_s = 0.005–1.382 cm³/g, d = 2.3–17.7 nm). The geometric dimensions of functional groups have a more essential effect on the parameters of porous structure in the case of TEOS-derived xerogels. Using solid-state NMR spectroscopy, it has been shown that in synthesis of xerogels with the use of TEOS, the molecular frame of globules is formed by structural units Qⁿ (n = 2,3,4), and the functional groups exist as structural units of Tⁿ (n = 2,3). The xerogels obtained with using bis(triethoxysilanes) consist only of structural units of Tⁿ-type (n = 1,2,3).     

Incorporation of titanium dioxide particles into polymer matrix using block copolymer micelles for fabrication of high refractive and transparent organic–inorganic hybrid materials

We report a novel strategy for incorporation of titanium dioxide (TiO₂) particles into poly(methyl methacrylate) (PMMA) to exploit high refractive and transparent organic–inorganic hybrid materials. Formation of TiO₂ particles of around 20 nm was conducted within hydrophilic core of block copolymer micelles of poly(methyl methacrylate‐block‐acrylic acid) (PMMA‐b‐PAA) in toluene via sol–gel process from titanium isopropoxide and hydrochloric acid. Subsequently, incorporation of TiO₂ particles into PMMA matrix was carried out by casting toluene solution of TiO₂ precursor‐loaded copolymer micelles, prepared from PMMA₃₅₀‐b‐PAA₉₃ and the precursor of mole ratio Ti⁴⁺/carboxyl 4.0, and PMMA. Hybrid films of TiO₂/PMMA exhibited high transparency to achieve transmission over 87% at 500 nm at 30 wt % of TiO₂ content. The refractive index of resulting hybrid films at 633 nm linearly increased with TiO₂ content to attain 1.579 at 30 wt % TiO₂, which was 0.1 higher than that of PMMA. Cross‐sectional transmission electron microscope images of TiO₂/PMMA hybrid films showed existence of TiO₂ clusters less than 100 nm, which were probably formed by aggregation or agglutination of TiO₂ particles during a drying process. It was also observed that decomposition temperature of the hybrid films elevated with increasing TiO₂ content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Advances in organic–inorganic hybrid sorbents for the extraction of organic and inorganic pollutants in different types of food and environmental samples

The efficiency of the extraction and removal of pollutants from food and the environment has been an important issue in analytical science. By incorporating inorganic species into an organic matrix, a new material known as an organic–inorganic hybrid material is formed. As it possesses high selectivity, permeability, and mechanical and chemical stabilities, organic–inorganic hybrid materials constitute an emerging research field and have become popular to serve as sorbents in various separaton science methods. Here, we review recent significant advances in analytical solid‐phase extraction employing organic–inorganic composite/nanocomposite sorbents for the extraction of organic and inorganic pollutants from various types of food and environmental matrices. The physicochemical characteristics, extraction properties, and analytical performances of sorbents are discussed; including morphology and surface characteristics, types of functional groups, interaction mechanism, selectivity and sensitivity, accuracy, and regeneration abilities. Organic–inorganic hybrid sorbents combined with extraction techniques are highly promising for sample preparation of various food and environmental matrixes with analytes at trace levels.