Determination of microamounts strontium by substoichiometric isotope dilution analysis

The isotope dilution with substoichiometric separation for the determination of strontium has been investigated. Strontium can be extracted with a substoichiometric amount of bis-1,2-dicarbollylcobaltate in nitrobenzene in the presence of 15-crown-5. It has been found, that Li⁺, Mg²⁺, Ca²⁺ and Fe³⁺ do not interfere in the strontium determination but the high extraction of K⁺, Na⁺ and NH₄ ⁺ ions results in marked influence.     

Titrimetric microdetermination of lanthanum

Summary A method for titrimetric determination of lanthanum is proposed by oxidising lanthanum rhodizonate with ceric sulphate directly. A violet coloured complex is precipitated when the solution containing sodium rhodizonate and lanthanum nitrate is boiled. By analysis it appears that with one lanthanum three rhodizonates are attached. It is observed that Na⁺, K⁺, and Zr⁴⁺ do not interfere but Ag⁺, Cs⁺, Tl⁺, Be²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Cu²⁺, Sn²⁺, Pd²⁺, Bi³⁺, Au³⁺, Sb³⁺, Al³⁺, Rh³⁺, Ru³⁺, Ir³⁺, Th⁴⁺, Te⁴⁺, Pt⁴⁺, Se⁶⁺, Cr⁶⁺, W⁶⁺, and U⁶⁺ do.

---

Zusammenfassung Zur maßanalytischen Bestimmung von Lanthan wird die unmittelbare Oxydation von Lanthanrhodizonat mit Cer(IV)-sulfat vorgeschlagen. Beim Kochen einer Lösung von Natriumrhodizonat und Lanthannitrat fällt ein violett gefärbter Komplex aus. Aus der Analyse ergibt sich das Verhältnis La: Rhodizonat =13. Na⁺, K⁺ und Zr⁴⁺ stören nicht im Gegensatz zu Ag⁺, Cs⁺, Tl⁺, Be²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Cu²⁺, Sn²⁺, Pd²⁺, Bi³⁺, Au³⁺, Sb³⁺, Al³⁺, Rh³⁺, Ru³⁺, Ir³⁺, Th⁴⁺, Te⁴⁺, Pt⁴⁺, Se⁶⁺, Cr⁶⁺, W⁶⁺, und U⁶⁺.

     

An investigation of microporous cetineite-type phases A6[B12O18][CX3]2[Dx(H2O,OH,O)6−y] I. The cetineite structure field

Hydrothermal syntheses between 120 and 200 °C have been performed to determine the chemical variability of semiconducting microporous materials with cetineite structure. The syntheses were based on the general formula A₆[B₁₂O₁₈][CX₃]₂[D_x(H₂O,OH,O)_6−y], (0≤×≤2; 0≤y≤6), which was derived from X-ray crystal structure refinements. A = Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Tl⁺, NH₄⁺, Ca²⁺, Sr²⁺, and Ba²⁺ were introduced as hydroxides, in some cases as carbonates, B = C = As³⁺, Sb³⁺, and Bi³⁺, and X = S²⁻, Se²⁻, and Te²⁻ as elements. Only syntheses with B = C = Sb³⁺ and X = S²⁻ and Se²⁻ were successfull. Known cetineite-type phases now include the element combinations A/Sb³⁺/S²⁻ with A = Na⁺ and K⁺, and A/Sb³⁺/Se²⁻ with A = Na⁺, K⁺, Rb⁺, Sr²⁺, Ba²⁺, and probably Tl⁺. Variable amounts of Na⁺, Sb³⁺ and C⁴⁺ were found to occupy the D position of the cetineite-type structure. The chemical variability can be described by the coupled substitutions A⁺ + H₂OA²⁺ + OH⁻ mH₂OD^m+ + mOH, and nOH⁻Dⁿ⁺ + nO²⁻. The crystals obtained are orange to dark red, in agreement with their semiconducting properties.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Direct titrimetric microdetermination of uranium

Summary Direct titrimetric method for the estimation of uranium(VI) in the range of 0.7 to 76 mg is performed by decomposing and oxidising the complex, {U(VI)O₂ · U(V)O₂ · Fe(CN)₆}, with ceric sulphate. The mixed valency state in the above mentioned complex has been confirmed by magnetic measurements, the isolated complex being paramagnetic. Na⁺, K⁺, Cs⁺, Ca²⁺, Sr²⁺, Mg²⁺, Be²⁺, Pd²⁺, La³⁺, Ir³⁺, Ru³⁺, and Te⁴⁺ do not interfere but Ag⁺, Tl⁺, Cu²⁺, Ba²⁺, CO²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Hg²⁺, Sn²⁺, Bi³⁺, Au³⁺, Rh³⁺, Sb³⁺, In³⁺, Ti³⁺, Th⁴⁺, Zr⁴⁺, Pt⁴⁺, V⁵⁺, Se⁶⁺, MO⁶⁺, and Os⁸⁺ do.

---

Zusammenfassung Die Bestimmung von Uran(VI) in der Größenordnung von 0,7 bis 76 mg erfolgt durch Zersetzung und Oxydation des Komplexes U(VI)O₂ · U(V)O₂ · · Fe(CN)₆ mit Cer(IV) sulfat. Die zweierlei Wertigkeitsstufen in diesem paramagnetischen Komplex wurden durch magnetische Messungen bestätigt. Na⁺, K⁺, Cs⁺, Ca²⁺, Sr²⁺, Mg²⁺, Be²⁺, Pd²⁺, La³⁺, Ir³⁺, Ru³⁺, and Te⁴⁺ stören nicht; hingegen stören Ag⁺, Tl⁺, Cu²⁺,Ba ²⁺, CO²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Hg²⁺, Sn²⁺, Bi³⁺, Au³⁺, Rh³⁺, Sb³⁺, In³⁺, Ti³⁺, Th⁴⁺, Zr⁴⁺, Pt⁴⁺, V⁵⁺, Se⁶⁺, MO⁶⁺, and Os⁸⁺.

     

A Fluorescent Chemosensor for Al3+ Based on CO Isomerization Derivated from Curcumin

A simple and nontoxic fluorescent chemosensor of di‐O‐methyl curcumin has been prepared from curcumin. The sensor exhibited selective and sensitive fluorescent responses toward Al³⁺ over a wide range of metal ions, such as Mn²⁺, Ce³⁺, Pt²⁺, Sn⁴⁺, Hg⁺, Sb³⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Cu²⁺, Ni²⁺, Na⁺, NH₄⁺, Ag⁺, Pb²⁺, Zn²⁺, Fe²⁺, Fe³⁺, Hg²⁺ and Cr³⁺ in ethanol/water. The free ligand showed quite weak fluorescence emission due to the isomerization of C?O double bond in the excited state, however, after addition of Al³⁺, fluorescence emission results in a prominent fluorescence enhancement.     

Synthesis,spectroscopic and spectrophotometric study of BODIPY appended crown ether sensor for ion detection

A novel fluoroionophore compound was synthesized from a boron dipyrromethene (BODIPY) fluorophore and 4′-formylbenzo-15-crown-5 ionophore groups. Photophysical properties of the BODIPY-crown compound were studied with UV–Vis and fluorescence spectroscopy. The effect of metalic cations (Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Al³⁺, Fe³⁺, Cu²⁺, Co²⁺, Zn²⁺, Ag⁺, Hg²⁺, Pb²⁺) on the absorption and fluorescence spectra of compound 2 was investigated. Blue shifts were detected in UV–Vis spectra upon addition of some metal ions (Al³⁺ > Fe³⁺ > Na⁺). At the same time, the emission intensity of this complex increased due to binding of Na⁺ ion to the benzo crown cavity. Additionally, a decrease in the intensity of the 630 nm emission peak and an increase in the intensity of the 570 nm emission peak was observed in the fluorescence emission spectra following addition of Al³⁺ and Fe³⁺ ions.     

Selective and Sensitive Two New Macroacyclic Schiff base Fluorescent Turn-Off Receptors for Fe3+, DFT Calculation and Their Antibacterial Activity

Two new Macroacyclic Schiff base chemosensors (L₁ and L₂) were synthesized by the one pot condensation reaction of 2-[3-(2-formyl phenoxy)propoxy]benzaldehyde and aminophenol in a 1:2 molar ratio and were characterized by IR, NMR spectroscopy. Both Schiff bases displayed high selectivity and sensitivity towards Fe³⁺ over other metal ions in H₂O-DMF solution (Ag⁺,Cu²⁺, Ni²⁺, Zn²⁺, Mg⁺², Mn⁺², Pb⁺², Co⁺², Hg⁺², Cr⁺³, Na⁺, Ba⁺² and Cd²⁺) due to their structure including oxygen donor atoms. The test results showed fluorescence quenching of the fluorophores when Fe³⁺ was bound to the recognition units. From test results, a high selectivity for Fe³⁺ were discovered in this type of sensors, especially, the probe based on 2-aminophenol exhibited more significant quenching in fluorescence intensity compared with 4-aminophenol-based due to its rigidity structure. In addition, the structure of ligands and their antibacterial properties was investigated.     

Effect of the nature and concentration of salting-out agents on the extraction of cobalt(II) from chloride solutions with trialkylamine

The effect of chlorides of Ca²⁺, Ni²⁺, Mg²⁺, Al³⁺, Li⁺, Fe²⁺, Cr³⁺, Na⁺, NH ₄ ⁺ , La³⁺, Nd³⁺ on the extraction recovery of cobalt from chloride solutions with mixtures based on trialkylamine was studied. The series of the salting-out activity of differently charged cations and the degree of their coextraction were determined.     

A Bis‐Oxime Derivative of Diaza‐18‐Crown‐6 as an Ionophore for Silver Ion

A new pendant‐arm derivative of diaza‐18‐crown‐6, containing two oxime donor groups, has been synthesized and incorporated into a polyvinyl chloride (PVC) membrane ion‐selective electrode. The electrode shows selectivity for Ag⁺ ion, with a near Nernstian response. Pb²⁺, Cu²⁺, Hg²⁺, and Tl⁺ are major interfering ions, with Cd²⁺ having minor interference. The electrode shows no potentiometric response for the ions Mg²⁺, Al³⁺, K⁺, Ca²⁺, Ni²⁺, Fe³⁺, and La³⁺, and is responsive to H⁺ at pH<6.     

The Synthesis of New Triazole Ligands and Determination of Complex Stability Constants with Transition Metal Cations in Aqueous Media

Six new triazole compounds were synthesized. These compounds containing the substituted benzylidenamino group were obtained by reaction of 3-(pyridine-4-yl)-5-p-tolyl-4-amino-4H-l,2,4-triazole 1 with the corresponding aldehyde. The reduced forms were prepared with NaBH₄ in methanol. The structures of the compounds were determined by IR, ¹H NMR, and ¹³C NMR spectral data, and their interaction with cations such as Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Ba²⁺, Sr²⁺, Ca²⁺, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ were investigated by using UV-visible spectrophotometry. Of the tested metal cations, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ complexed with the ligands. The complex stability constants (log ₁₀ K) were measured in slightly acidic aqueous media at 25.0±0.1 °C. These stability constants were determined by measuring the increase in solubility of the nearly insoluble ligand molecule due to complex formation with a soluble cation, and this method is discussed. It was found that the position of chlorine atoms on the benzene ring strongly affects the complexation of Cu²⁺ ion with these ligands.     

Metal ion complexation in acetonitrile by upper-rim allyl-substituted, di-ionized calix[4]arenes bearing two dansyl fluorophores

The influence of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺ on the spectroscopic properties of two dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims of a series of three, structurally related, di-ionized calix[4]arenes is investigated by means of absorption and emission spectrophotometry. Di(tetramethylammonium) salts of the di-ionized ligands, L, L1, and L2, which differ in having no, two and four allyl groups, respectively, on the upper rim of the calix[4]arene scaffold, are utilized for the spectrofluorimetric titration experiments in MeCN. On complexation by alkaline earth metal cations, the emission spectra undergo marked red shifts and quenching of the dansyl fluorescence. These effects are weaker with alkali metal cations. Transition metal cations and Pb²⁺ interact strongly with the ligands. In particular, Fe³⁺, Hg²⁺ and Pb²⁺ cause greater than 99% quenching of the dansyl fluorescence.     

冠醚聚合物的研究 Ⅱ.以聚硫醚为主链的硫杂冠醚聚合物的合成及其络合性能

 本文报道了一种合成硫杂冠醚聚合物的新方法。以聚(2′-氯乙基-2,3-环硫丙基醚)为预聚物与二巯基化合物通过大分子反应直接环化,一步法合成了四种以聚硫醚为主链的新型硫杂冠醚聚合物(PD1-PD4)。并测定了它们对Ag⁺、Au³⁺)、Pd²⁺、Pt⁴⁺、Cu²⁺、Hg²⁺、Zn²⁺、Cd²⁺、Pb²⁺、Mg²⁺、K⁺、Ns⁺等金属离子的络合性能。结果表明:它们除不络合K⁺、Na⁺、Mg²⁺、Pb²⁺外,对其它八种离子有不同程度的络合,其中对Ag⁺、Au³⁺、Pd²⁺等贵金属离子的络合容量较高。     

Metal Ion Interaction of Two New Tritopic N2O13 Macrobicycles with B15C5 Moieties in Acetonitrile Solution

The synthesis of two new tritopic crown ligands (L1 and L2) bearing two benzo-15-crown-5 lateral moieties linked through a dibenzo-trioxa chain together with their interaction with metal ions, in acetonitrile and acetonitrile–water (50%, v/v) solutions is reported. The influence of K⁺, Na⁺, Li⁺, Ca²⁺, Ba²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Al³⁺, on the spectroscopic properties of these diaza-polyoxa ligands was investigated by absorption spectrophotometry and in some cases by fluorescence emission spectroscopy. Coordination with alkaline (Na⁺, K⁺ and Li⁺) and alkaline earth (Ca²⁺and Ba²⁺) metal ions is assumed to be weak with both macrobicyclic ligands, while the interaction with both imine and amine derivatives causes a minor effect in the absorption spectra. Coordination with Cu²⁺, Zn²⁺ and Pb²⁺ in acetonitrile solution causes a major change in the absorption spectra of the chromophores. In the case of Cu²⁺, addition of the metal to L1 or L2 leads to a blue–violet complex in solution with an absorbance maximum centred at 590 nm. Interaction of the Schiff-base L1 with Pb²⁺ leads to a short wavelength shift in the absorption bands, comparable with the ZnL1 complex. Presence of transition metal ions such as Co²⁺, Ni²⁺and Cd²⁺ do not remarkably affect the absorption spectra of L1 and L2 in solution. Trivalent aluminium has a modest effect in the absorption bands of both N₂O₁₃ donor set bismacrocyclic ligands. The fluorescence study of L2 in the presence of Na⁺, K⁺, Ca²⁺, Ba²⁺, Co²⁺, Cu²⁺, Ni²⁺, Pb²⁺ and Al³⁺shows that Cu²⁺, Pb²⁺ and Al³⁺ complexes form non-fluorescent complexes.     

2H1NA/β-cyclodextrin inclusion complex: Preparation,characterization and chemosensory application for detecting Ag+

The inclusion complex of 2-hydroxy-1-naphthoic acid (2H1NA) with β-cyclodextrin (β-CD) has been investigated using UV-visible and fluorescence spectral techniques in liquid states, FTIR, NMR, XRD and SEM techniques in solid state, molecular docking techniques in virtual states. The binding constants of for the formation of 1:1 2H1NA:β-CD inclusion complex is estimated by UV-visible and fluorescence spectral techniques. The chemosensory power of 2H1NA:β-CD complex was investigated thoroughly for various metal cations and we found the emission of complex showed a drastic increase in the intensity for Ag⁺. Competition experiments of 2H1NA:β-CD complex with Ag⁺ in presence of other metal ions (Na⁺, K⁺, Hg⁺, Al²⁺, Ca²⁺, Ba²⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Sn²⁺, Ti²⁺, Zn²⁺, Cr³⁺, Fe³⁺) showed that no significant variation was found in the fluoresce intensity of 2H1NA:β-CD complex upon adding all other cations. The linearity range, LOD and LOQ are determined from the selectivity and sensitivity studies for Ag⁺. Our result suggests that the 2H1NA:β-CD inclusion complex would be promising material for developing solid state sensory device for sensing Ag⁺.     

Synthesis of lariat organochalcogenoethers based on azacalix[3]arenes for the potentiometric detection of [UO2] ions

The syntheses of organochalcogen-supported azacalix[3]arenes are described in a one-pot manner in satisfactory yields. A remarkably selective potentiometric response was accomplished for uranyl ions over a variety of other metal ions, including alkali (Na⁺, K⁺), alkaline-earth (Mg²⁺, Ca²⁺, Ba²⁺), transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Fe³⁺, Zn²⁺, Cd²⁺ and Pb²⁺) using an ion-selective electrode based on compound 3 incorporated into a polymeric (PVC) membrane.     

Metal ion complexation in acetonitrile by di-ionized calix[4]arenes bearing two dansyl fluorophores

The influence of metal cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) on the spectroscopic properties of two dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims of a series of three, structurally related, di-ionized calix[4]arenes was investigated by means of absorption and emission spectrophotometry. Di(tetramethylammonium) salts of the di-ionized ligands, (TMA)₂L1, (TMA)₂L2 and (TMA)₂L3, which differ in having zero, two and four tert-butyl groups, respectively, on the upper rim of the calix[4]arene scaffold were utilized for the spectrofluorimetric titration experiments in acetonitrile. On complexation by alkaline earth metal cations, both the absorption and emission spectra undergo marked red shifts and quenching of the dansyl fluorescence. These effects are weaker with alkali metal cations. Transition metal cations interact strongly with the ligands. In particular, Fe³⁺, Hg²⁺ and Pb²⁺ cause greater than 97% quenching of the dansyl fluorescence in the di-ionized ligands.     

Role of stannic phosphate in the uptake of cations. Separation of zirconium from thorium and cadmium from indium at tracer concentrations

The uptake of Na⁺, K⁺, Rb⁺, Cs⁺, Ag⁺, Ca²⁺, Cu²⁺, Sr²⁺, Cd²⁺, Ba²⁺, Pb²⁺, Sc³⁺, Co³⁺, Y³⁺, Sb³⁺, Tb³⁺, Zr⁴⁺ and Th⁴⁺ cations at very small concentrations has been studied over a column of stannic phosphate. The exchanger was prepared by mixing H₃PO₄, NaCl and SnCl₄ in suitable proportions and the ratio of PSn, in the product was obtained to be 1.96. Radiochemical separations of carrier free⁹⁵Zr from²³⁴Th and^115mIn, from¹¹⁵Cd have been carried out by adopting a simple chemical procedure over a column of stannic phosphate. The -spectrum analysis showed that the separated products are of high radionuclidic purity. The separation procedures took less than half an hour with quantitative yield.     

A Highly Selective and Sensitive Fluorescent Chemosensor for Detection of Al3+ in Totally Aqueous Media

A fluorescent chemosensor ( 1 ) based on 2‐hydroxy‐1‐naphthaldehyde Schiff‐base was developed for the detection of Al³⁺ in 100% aqueous solution. Upon addition of Al³⁺, a significant fluorescence enhancement was observed, which was not affected by other metal ions including Na⁺, K⁺, Ca²⁺, Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Cr³⁺, Ag⁺, Pb²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Fe²⁺ and Fe³⁺ under weak acid conditions. Moreover, the specific response to Al³⁺ was visible under natural light. The binding mode between 1 and Al³⁺ was clarified by ESI‐MS and ¹H NMR.     

DDB liver drug as a novel ionophore for potentiometric barium (II) membrane sensor

Dimethyl-4,4-dimethoxy-5,6,5′,6′-dimethylene dioxy biphenyl-2,2-dicarboxylate (DDB) liver drug is used as a novel ionophore in plasticized poly (vinyl chloride) (PVC) matrix membrane sensors for barium ions. Optimum performance characteristics are displayed by membrane sensor incorporating DDB ionophore, potassium tetrakis(4-chlorophenyl)borate as lipophilic salt, and o-nitrophenyloctyl ether as plasticizer. The sensor exhibits a linear response over the concentration range 10⁻¹-10⁻⁵ mol l⁻¹ BaCl₂ with a Nernstian slope of 30 mV per decade and high selectivity towards Ba²⁺ with respect to Li⁺, Na⁺, K⁺, Rb⁺, NH₄⁺, Mg²⁺, Ca²⁺, Sr²⁺, Mn²⁺, Co²⁺, Ni²⁺, Cd²⁺, Al³⁺, La³⁺, and Ce³⁺ ions. The sensor response is stable over a wide pH range (4-9) and the lifetime is about 2 months. The proposed sensor is successfully applied to the determination of Ba²⁺contents of some rocks.