Structure sensitivity in the oxidation of CO on Ir surfaces

We report results on the catalytic oxidation of carbon monoxide (CO) over clean Ir surfaces that are prepared reversibly from the same crystal in situ with different surface morphologies, from planar to nanometer-scale facets of specific crystal orientations and various sizes. Our temperature-programmed desorption (TPD) data show that both planar Ir(210) and faceted Ir(210) are very active for CO oxidation to form CO2. Preadsorbed oxygen promotes the oxidation of CO, whereas high coverages of preadsorbed CO poison the reaction by blocking the surface sites for oxygen adsorption. At low coverages of preadsorbed oxygen (< or = 0.3 ML of O), the temperature Ti for the onset of CO2 desorption decreases with increasing CO coverage. At high coverages of preadsorbed oxygen (> 0.5 ML of O), T(i) is < 330 K and is independent of CO coverage. Moreover, we find clear evidence for structure sensitivity in CO oxidation over clean planar Ir(210) versus that over clean faceted Ir(210): the CO2 desorption rate is sensitive to the surface morphological differences. However, no evidence has been found for size effects in CO oxidation over faceted Ir(210) for average facet size ranging from 5 to 14 nm. Energetically favorable binding sites for O/Ir(210) are characterized using density functional theory (DFT) calculations.     

Oxidation of CO by NO on planar and faceted Ir(210)

Oxidation of CO by pre-adsorbed NO has been studied on planar Ir(210) and nanofaceted Ir(210) with average facet sizes of 5 nm and 14 nm by temperature programmed desorption (TPD). Both surfaces favor oxidation of CO to CO(2), which is accompanied by simultaneous reduction of NO with high selectivity to N(2). At low NO pre-coverage, the temperature (T(i)) for the onset of CO(2) desorption as well as CO(2) desorption peak temperature (T(p)) decreases with increasing CO exposure, and NO dissociation is affected by co-adsorbed CO. At high NO pre-coverage, T(i) and T(p) are independent of CO exposure, and co-adsorbed CO has no influence on dissociation of NO. Moreover, at low NO pre-coverage, planar Ir(210) is more active than faceted Ir(210) for oxidation of CO to CO(2): T(i) and T(p) are much lower on planar Ir(210) than that on faceted Ir(210). In addition, faceted Ir(210) with an average facet size of 5 nm is more active for oxidation of CO to CO(2) than faceted Ir(210) with an average facet size of 14 nm, i.e., oxidation of CO by pre-adsorbed NO on faceted Ir(210) exhibits size effects on the nanometer scale. In comparison, at low O pre-coverage planar Ir(210) is more active than faceted Ir(210) for oxidation of CO to CO(2) but no evidence has been found for size effects in oxidation of CO by pre-adsorbed oxygen on faceted Ir(210) for average facet sizes of 5 nm and 14 nm. The TPD data indicate the same reaction pathway for CO(2) formation from CO + NO and CO + O reactions on planar Ir(210). The adsorption sites of CO, NO, O, CO + O, and CO + NO on Ir are characterized by density functional theory.     

Reduction of NO by CO on Unsupported Ir: Bridging the Materials Gap

Temperature programmed desorption (TPD) and density functional theory (DFT) are used to investigate adsorption sites and reaction of coadsorbed NO and CO on planar Ir(210) and faceted Ir(210) with tailored sizes of three‐sided nanopyramids exposing (311), (31${\bar 1}$ ) and (110) faces. Both planar and faceted Ir(210) are highly active for reduction of NO by CO with high selectivity to N₂, which is accompanied by simultaneous oxidation of CO. Evidence is found for structure sensitivity in adsorption sites and reaction of coadsorbed NO and CO on faceted Ir(210) versus planar Ir(210). Strong interaction between NO and CO at high NO exposure and one‐monolayer CO pre‐coverage results in “explosive” evolution of N₂ and CO₂ on planar Ir(210) and size effects in reduction of NO by CO on faceted Ir(210) for average facet size ranging from 5 to 14 nm without change in facet structure.     

Hydrazine decomposition over Irn/Al2O3 model catalysts prepared by size-selected cluster deposition

Hydrazine decomposition chemistry was probed over a temperature range from 100 to 800 K for a series of model catalysts prepared by mass-selected Ir(n)(+) deposition on planar Al(2)O(3)/NiAl(110). Two sets of experiments are reported. Temperature-programmed desorption (TPD) was used to study hydrazine desorption and decomposition on Al(2)O(3)/NiAl(110) and on a model catalyst prepared by deposition of Ir(+) on Al(2)O(3)/NiAl(110) at a density large enough (5 x 10(14) cm(-2)) that formation of a distribution of small Ir(n) clusters on the surface is expected. This model catalyst was found to have hydrazine decomposition properties qualitatively similar to those observed on single-crystal Ir and polycrystalline Rh. This catalyst was also studied by X-ray photoelectron spectroscopy (XPS), to probe TPD-induced changes in the samples. A substantial decrease in the Ir XPS intensity suggests that considerable sintering takes place when the samples are heated to 800 K. In addition, a significant fraction of the nitrogen contained in the hydrazine is converted to an aluminum nitride (or mixed Al(x)O(y)N(z)) compound. Continuous flow experiments were used to probe relative reactivity at 300 and 400 K of samples prepared by depositing differently sized Ir(n)(+) clusters. At 300 K, samples prepared with preformed Ir(n)(+) (n = 5, 7, 10) are about twice as active, per Ir atom, as samples prepared with Ir(+) deposition, and there is a weaker trend to higher activity with increasing cluster size. At 400 K the trends are similar, but weaker, suggesting that thermal modification of the samples is already significant.     

Generating and dimerizing the transient 16-electron phosphinidene complex [Cp*Ir=PAr]: a theoretical and experimental study

The properties of the 16-electron phosphinidene complex [CpRIr=PR] were investigated experimentally and theoretically. Density functional theory calculations show a preferred bent geometry for the model complex [CpIr=PH], in contrast to the linear structure of [CpIr=NH]. Dimerization to give [[CpIr=PH]2] and ligand addition to afford [Cp(L)Ir=PH] (L=PH3, CO) were calculated to give compounds that were energetically highly favorable, but which differed from the related imido complexes. Transient 16-electron phosphinidene complex [Cp*Ir=PAr] could not be detected experimentally. Dehydrohalogenation of [Cp*IrCl2(PH2Ar)] in CH2Cl2 at low temperatures resulted in the novel fused-ring systems 17 (Ar=Mes*) and 20 (Ar=Mes), with dimeric [[Cp*Ir=PAr]2] being the likely intermediate. Intramolecular C-H bond activation induced by steric factors is considered to be the driving force for the irreversible formation of 17 and 20. ONIOM calculations suggest this arises because of the large steric congestion in [[Cp*Ir=PAr]2], which forces it toward a more reactive planar structure that is apt to rearrange.     

NH3 adsorption and decomposition on Ir(110): a combined temperature programmed desorption and high resolution fast x-ray photoelectron spectroscopy study

The adsorption and decomposition of NH3 on Ir(110) has been studied in the temperature range from 80 K to 700 K. By using high-energy resolution x-ray photoelectron spectroscopy it is possible to distinguish chemically different surface species. At low temperature a NH3 multilayer, which desorbs at approximately 110 K, was observed. The second layer of NH3 molecules desorbs around 140 K, in a separate desorption peak. Chemisorbed NH3 desorbs in steps from the surface and several desorption peaks are observed between 200 and 400 K. A part of the NH3ad decomposes into NH(ad) between 225 and 300 K. NH(ad) decomposes into N(ad) between 400 K and 500 K and the hydrogen released in this process immediately desorbs. N2 desorption takes place between 500 and 700 K via N(ad) combination. The steady state decomposition reaction of NH3 starts at 500 K. The maximum reaction rate is observed between 540 K and 610 K. A model is presented to explain the occurrence of a maximum in the reaction rate. Hydrogenation of N(ad) below 400 K results in NH(ad). No NH2ad or NH3ad/NH3 were observed. The hydrogenation of NH(ad) only takes place above 400 K. On the basis of the experimental findings an energy scheme is presented to account for the observations.     

The role of Oad in the decomposition of NH3 adsorbed on Ir(110): a combined TPD and high-energy resolution fast XPS study

High energy resolution fast XPS combined with TPD experiments were used to study the effect of chemisorbed oxygen on the adsorption and dissociation of NH(3) on Ir(110). Below 250 K the presence of O(ad) does not influence NH(3) decomposition. Above 250 K O(ad) enhances NH(3) dissociation, which results in three times as much N(2) formation and less molecular NH(3) desorption compared to the experiments without O(ad). The effect of O(ad) can be attributed to destabilization of NH(ad) on the surface, resulting in a further dehydrogenation towards N(ad). The presence of O(ad) on the surface lowers the temperature at which the N(ad) combination reaction takes place by as much as 200 K, due to repulsive interaction between N(ad) and O(ad). NO is formed above 450 K if both N(ad) and O(ad) are present on the surface.     

Nanoscale surface chemistry over faceted substrates: structure, reactivity and nanotemplates

Faceting is a form of self-assembly at the nanometre-scale on adsorbate-covered single-crystal surfaces, occurring when an initially planar surface converts to a "hill and valley" structure, exposing new crystal faces of nanometre-scale dimensions. Planar metal surfaces that are rough on the atomic scale, such as bcc W(111), fcc Ir(210) and hcp Re(1231), are morphologically unstable when covered by monolayer films of oxygen, or by certain other gases or metals, becoming "nanotextured" when heated to temperatures above approximately 700 K. Faceting is driven by surface thermodynamics (anisotropy of surface free energy) but controlled by kinetics (diffusion, nucleation). Surfaces can spontaneously rearrange to minimize their total surface energy (by developing facets), even if this involves an increase in surface area. In this critical review, we discuss the structural and electronic properties of such surfaces, and first principles calculations are compared with experimental observations. The utility of faceted surfaces in studies of structure sensitive reactions (e.g., CO oxidation, ammonia decomposition) and as templates for growth of metallic nanostructures is explored (122 references).     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

超细Ir催化剂对氨氧化的电催化性能

报道了一种新型的、用NH4F作络合剂的络合还原法制备的Ir催化剂及其对氨氧化的电催化性能. 结果表明, 由于溶液中的Ir3+和NH4F形成络合物, 因此用这种络合法制得Ir催化剂中Ir粒子的平均粒径为2.8 nm, 要比不加络合剂时制得的Ir催化剂中Ir粒子的平均粒径(7.5 nm)小很多. 所以, 用络合还原法制得的Ir催化剂对氨氧化的电催化活性和稳定性都比不加络合剂时制得的Ir催化剂好很多. 且该制备方法简单、实用, 适用于催化剂的实际生产.     

双硫脲银配合物(Cl^-)红外光谱及热分解机理的研究

用红外光谱,差热分析、热重量分析研究了AgCl.2CS(NH2)2络合物的热分解,提出络合物的热分解机理,它包括在温度210-230℃的范围内硫脲基转变为NH4NCS同分异构体.计算了热分解反应的表观活化能和指前因子.     

The cluster Ir4 and its interaction with a hydrogen impurity. A density functional study

To contribute to the understanding of how iridium particles act as catalysts for hydrogenation and dehydrogenation of hydrocarbons, we have determined structures and binding energies of various isomers of Ir(4) as well as HIr(4) on the basis of relativistic density functional theory. The most stable isomer of Ir(4) showed a square planar structure with eight unpaired electrons. The tetrahedral structure, experimentally suggested for supported species, was calculated 49 kJ mol(-1) less stable. Hydrogen coordinates preferentially to a single Ir center of the planar cluster with a binding energy of up to 88 kJ mol(-1) with respect to the atom in the H(2) molecule. Terminal interaction of hydrogen with an Ir(4) tetrahedron causes the cluster to open to a butterfly structure. We calculated terminal binding of hydrogen at different Ir(4) isomers to be more stable than bridge coordination, at variance with earlier studies.     

Pentamethylcyclopentadienyl-iridium(III) complexes with pyridylamino ligands: synthesis and applications as asymmetric catalysts for Diels-Alder reactions

Reaction of the dimer [(Cp*IrCl)2(P-Cl)2] with chiral pyridylamino ligands (pyam, L1-L5) in the presence of NaSbF6 gave complexes [Cp*IrCl(pyam)][SbF6] 1-5 as diastereomeric mixtures, which have been fully characterised, including the X-ray molecular structure determination of the complexes (S(Ir),R(N),R(C))-[Cp*IrClL1][SbF6] 1a and (R(Ir),S(N),S(C))-[Cp*IrClL5][SbF6] 5a. Treatment of these cations with AgSbF6 affords the corresponding aqua species [Cp*Ir(pyam)(H2O)][SbF6]2 6-10 which have been also fully characterised. The molecular structure of the complex (S(Ir),R(N),R(C))-[Cp*IrL,(H2O)][SbF6]2 6 has been determined by X-ray diffractometric methods. The aqua complexes [Cp*Ir(pyam)(H2O)][SbF6]2 (6, pyam = L2 (7), L3 (8)) evolve to the cyclometallated species [Cp*Ir{kappa3(N,N',C)-(R)-(C6H4)CH(CH3)NHCH2C5NH4}][SbF6] (11), [Cp*Ir{kappa3(N,N',C)-(R)-(C10H6)CH(CH3)-NHCH2C5NH4)}][SbF6] (12), and [Cp*Ir{kappa3(N,N',C)-(R)-(C10H6)CH(CH3)NHCH2C9NH6)}][SbF6] (13) respectively, via intramolecular activation of an ortho C-H aryl bond. Complexes 6-10 are enantioselective catalysts for the Diels-Alder reaction between methacrolein and cyclopentadiene. Reaction occurs rapidly at room temperature with good exo : endo selectivity (from 81 : 19 to 98 : 2) and moderate enantioselectivity (up to 72%). The involved intermediate Lewis acid-dienophile compounds [Cp*Ir(pyam)(methacrolein)][SbF]2 (pyam = L4 (14), L5 (15)) have been isolated and characterised.     

TAP studies of ammonia decomposition over Ru and Ir catalysts

The Temporal Analysis of Products (TAP) technique has been used to investigate the mechanism involved in the catalytic decomposition of NH(3) over a series of catalysts consisting of activated carbon supported Ru (promoted and non-promoted with Na) and over an activated carbon supported Ir. An extensive study of the role played by both the support and the promoter in the "side reactions" and in the stability and surface lifetime of the NH(x) species has been performed. It was suggested that the N(2) produced during the first steps of the reaction over the activated carbon supported Ru catalysts promoted with Na forms a Na-N-Ru complex at the promoter-transition metal crystallite interface. This study also suggests that the Na promoter prevents the diffusion of hydrogen from the metal to the support via spill-over. A similar effect was observed after the thermal treatment at high temperature of the carbon catalyst support. Finally large differences in multi-pulse TAP results have been detected between Ru and Ir catalysts implying that the NH(3) decomposition reaction mechanism must be different on both metals.     

Synthesis and reactivity of the monomeric late-transition-metal parent amido complex [Ir(Cp*)(PMe3)(Ph)(NH2)

The late-transition-metal parent amido compound [Ir(Cp*)(PMe3)(Ph)(NH2)] (2) has been synthesized by deprotonation of the corresponding ammine complex [Ir(Cp*)(PMe3)(Ph)(NH3)][OTf] (6) with KN(SiMe3)2. An X-ray structure determination has ascertained its monomeric nature. Proton-transfer studies indicate that 2 can successfully deprotonate p-nitrophenylacetonitrile, aniline, and phenol. Crystallographic analysis has revealed that the ion pair [Ir(Cp*)(PMe3)(Ph)(NH3)][OPh] (8) exists as a hydrogen-bonded dimer in the solid state. Reactions of 2 with isocyanates and carbodiimides lead to overall insertion of the heterocumulenes into the N--H bond of the Ir-bonded amido group, demonstrating the ability of 2 to act as an efficient nucleophile. Intriguing reactivity is observed when amide 2 reacts with CO or 2,6-dimethylphenyl isocyanide. eta4-Tetramethylfulvene complexes [Ir(eta4-C5Me4CH2)(PMe3)(Ph)(L)] (L=CO (15), CNC6H3-2,6-(CH3)2 (16)) are formed in solution through displacement of the amido group by the incoming ligand followed by deprotonation of a methyl group on the Cp* ring and liberation of ammonia. Conclusive evidence for the presence of the Ir-bonded eta4-tetramethylfulvene moiety in the solid state has been provided by an X-ray diffraction study of complex 16.     

铂和铱催化剂在中性电解液中对nh3电氧化性能

比较了Pt和Ir催化剂在中性NaCIO4电解液中对NH3氧化的电催化活性和选择性.发现NH3和NH4OH在Pt和Ir催化剂上的电氧化性能相似,因而可用NH4OH代替NH3进行研究.NH4OH在Pt和Ir催化剂上氧化峰峰电流密度与NH4OH浓度呈很好的线性关系,因而Pt和Ir均能作为控制电位电解型NH3传感器的催化剂.当NH4OH浓度为0.013 mol/L时,NH3在Pt和Ir催化剂上的氧化峰分别位于0.4和0.8 v,NH4OH在Pt催化剂上的氧化峰峰电位负于在Ir催化剂上的,这是Pt催化剂的优点,但NH4OH在Ir催化剂上的氧化峰峰电流密度为Pt催化剂上的2.5倍以上,说明NH4OH在Ir催化剂上的检测灵敏度远高于在Pt催化剂上的.而且CO对NH3在Ir催化剂上的检测没有干扰,但在Pt催化剂上有明显干扰.因此,初步的研究结果表明,Ir催化剂较适用于定电位电解型的NH3电化学传感器的阳极催化剂.     

N-Heterocyclic carbene functionalized iridium phosphinidene complex [Cp*(NHC)Ir=PMes*]: comparison of phosphinidene,imido, and carbene complexes

The novel phosphinidene complex [Cp*(NHC)Ir=PMes*] (3; NHC=1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene) was prepared in high yield from [Cp*(NHC)IrCl(2)] (2) and [LiPHMes*].3 THF. It represents the first example of an NHC ligated transition metal phosphinidene complex. The X-ray crystal structure for 3 is also reported. DFT calculations on the N-heterocyclic carbene containing parent complexes [Cp(NHC)Ir=E] (E=PH, NH, CH(2)) show that the NHC ligand acts as good sigma-donor/weak pi-acceptor ligand and forms strong Ir-C(NHC) single bonds. The Ir=E double bonds result from strong triplet-triplet interactions between [Cp(NHC)Ir] and E.     

Distinct thermodynamics for the formation and cleavage of N-H bonds in aniline and ammonia. Directly-observed reductive elimination of ammonia from an isolated amido hydride complex

The reactions of aryl and alkylamines with the (PCP)Ir fragment (PCP = 1,3-di-tert-butylphosphinobenzene) were studied to determine the reactivities and stabilities of amine and amido hydride complexes relative to C-H activation products. Reaction of aniline with the (PCP)Ir unit generated from (PCP)IrH2 and norbornene resulted in the N-H oxidative addition product (PhNH)(H)Ir(PCP) (1a). In contrast, reaction of this fragment with ammonia gave the ammonia complex (NH3)Ir(PCP) (2). The amido hydride complex that would be formed by oxidative addition of ammonia, (PCP)Ir(NH2)(H) (1b), was generated independently by deprotonation of the ammonia complex (NH3)Ir(H)(Cl)(PCP) (3) with KN(SiMe3)2 at low temperature. This amido hydride complex underwent reductive elimination at room temperature to form the ammonia complex 2. Addition of CO to anilide complex 1a gave (PCP)Ir(PhNH)(H)(CO) (4a). Addition of CNtBu to terminal amido complex 1b formed (PCP)Ir(NH2)(H)(CNtBu) (4b), the first structurally characterized iridium amido hydride. Complexes 4a and 4b underwent reductive elimination of aniline and ammonia; parent amido complex 4b reacted faster than anilide 4a. These observations suggest distinct thermodynamics for the formation and cleavage of N-H bonds in aniline and ammonia. Complexes 1a, 2, 4a, and 4b were characterized by single-crystal X-ray diffraction methods.     

CH3（ad）在清洁及预吸附氧Pd（100）表面的热脱附性能

用高分辨电子能量损失谱，热脱附谱，紫外光电子能谱研究了ＣＨ３在清洁及预吸附氧Ｐｄ表面上的热稳定性。ＣＨ３由ＣＨ３Ｉ在Ｐｄ表面的热分解来产生。ＣＨ３Ｉ的ＨＲＥＥＬＳ表明，ＣＨ３中的Ｃ－Ｈ键近似与表面平行，ＣＨ３Ｉ在Ｐｄ表面低于１１０Ｋ时已裂解为ＣＨ３和Ｉ，大量的ＣＨ３在２００－２１０Ｋ的温度范围内的Ｈ结合并以ＣＨ４的形式脱附，但在氧改性表面，ＣＨ４脱附的温度范围变宽，脱附温度有所提高，可能是由于表面     

Competition between NH.HIr Intramolecular Proton-Hydride Interactions and NH.FBF(3)(-) or NH.O Intermolecular Hydrogen Bonds Involving [IrH(2-thiazolidinethione)(4)(PCy(3))](BF(4))(2) and Related Complexes

The reaction of IrH(5)(PCy(3))(2) in acetone with 2 equiv of HBF(4) results in the formation of the air-stable complex [Ir(H)(2)(PCy(3))(2)(acetone)(2)]BF(4), 1. The reaction of 1 with an excess of 2-thiazolidinethione or 2-benzothiazolethione in the presence of 2 equiv of HBF(4) gives the complexes [Ir(H)(PCy(3))(L)(4)](BF(4))(2) (2a, L = 2-thiazolidinethione; 2b, L = 2-benzothiazolethione). Complex 2a has an intramolecular NH.H(Ir).HN interaction both in the crystalline solid as determined by X-ray diffraction and in a CD(2)Cl(2) solution as determined by the T(1) method. The d(HH) were determined to be 2.2 +/- 0.1 ? in the solid state and 1.9 +/- 0.1 ? in solution. The NH.H(Ir).HN interactions and NH.F.HN hydrogen bonds which involve FBF(3)(-) form a four-member ring in a butterfly conformation. The nOe effect of the hydride on the NH proton is around 10%. A crystal of 2a is in the triclinic space group P&onemacr; with a = 11.426(3), b = 11.922(3), c = 19.734(4) ?, alpha = 87.05(1) degrees, beta = 88.23(1) degrees, gamma = 75.50(1) degrees, V = 2599(1) ?(3), and Z = 2 at T = 173 K; full-matrix least-squares refinement on F(2) was performed for 10 198 independent reflections; R[F(2)>2sigma(F(2))] = 0.0480, R(w)(F(2)) = 0.099. The formation of the NH.HIr proton-hydride interaction is as favorable as the formation of intermolecular hydrogen bonds NH.FBF(3)(-) or NH.O hydrogen bonds with OPPh(3) or H(2)O in CD(2)Cl(2). A similar NH.HIr interaction also has been observed in the complexes [Ir(H)(2)(PCy(3))(2)(L)(2)]BF(4) (3a, L = 2-thiazolidinethione; 3b, L = 2-benzothiazolethione) but not in the complexes with L = NH(2)NH(2) (3c) and L = NH(3) (3d). Both the NH and IrH protons are deuterated when a solution of 2 or 3 in C(6)D(6) is exposed to 1 atm of D(2) gas or D(2)O.