Separation of preservatives in cosmetic products by micellar electrokinetic chromatography.

This paper describes the methodological optimization and validation of a simple micellar electrokinetic chromatography for the rapid simultaneous separation of 2-methyl-4-isothiazolin-3-one, methylparaben, ethylparaben, propylparaben, and butylparaben. By using a 30 mM phosphate buffer (pH 7.2) containing 30 mM sodium dodecyl sulfate (SDS), an applied voltage of 10 kV and a separation temperature of 40 degrees C, a quantitative determination was achieved, resulting in an analysis time of approximately 4 min. Only dilution and filtration are needed before analysis. The parameters for validation, such as linear ranges, detection limits, accuracy, and precision, are also reported.     

Comparison of microemulsion electrokinetic chromatography and micellar electrokinetic chromatography methods for the analysis of phenolic compounds

In this study, microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic chromatography (MEKC) were compared for their abilities to separate and detect thirteen phenolic compounds (syringic acid, p-coumaric acid, vanillic acid, caffeic acid, gallic acid, 3,4-dihydroxybenzoic acid, 4-hydroxybenzoic acid, (+)-catechin, (-)-epigallocatechin, (-)-epicatechin gallate, (-)-epigallocatechin gallate, (-)-epicatechin, and (-)-gallocatechin), and two other ingredients (caffeine and theophylline) in teas and grapes. Separation of phenolic compounds was improved by changing the SDS concentration for MEEKC, but the SDS concentration rarely affected the resolution for MEKC. Organic modifier (acetonitrile or methanol) was found to markedly influence the resolution and selectivity for both MEEKC and MEKC systems. In addition, a higher voltage and a higher column temperature improved the separation efficiency without any noticeable reduction in resolution for MEEKC whereas they caused a poor resolution for the MEKC system. Although separations with baseline resolution were achieved by the optimized MEEKC and MEKC methods, the separation selectivity resulting from the proposed MEEKC method was completely different from that of MEKC.     

Comparison of microemulsion electrokinetic chromatography and micellar electrokinetic chromatography as methods for the analysis of ten benzophenones

Microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic chromatograpy (MEKC) were compared for their abilities to separate and detect ten similar benzophenones, which are commonly used as UV filters in various plastic and cosmetic products. Sodium dodecyl sulfate (SDS) concentration and column temperature rarely affected separation resolution for MEEKC, but separation of benzophenones could be improved by changing the SDS concentration and column temperature for MEKC. Buffer pH and ethanol (organic modifier) were found to markedly influence the separation selectivity for both MEEKC and MEKC systems. In addition, a higher electric voltage improved the separation efficiency without a noticeable reduction in separation resolution for MEEKC, whereas it caused a poor separation resolution for the MEKC system.     

Application of micellar electrokinetic chromatography to pharmaceutical analysis

Electrokinetic chromatography is a new type of analytical separation method which belongs to the group of high performance capillary electrophoretic techniques but whose separation principle is based on that of chromatography. The solute distributes itself between a carrier and the surrounding medium. The carrier, which corresponds to the stationary phase in conventional chromatography, can be transported by electrophoresis with a different velocity from the surrounding medium. The separation is achieved by the differential solute distribution and the differential migration of the carrier. The charged molecules or charged molecular aggregates are employed as the carrier. Various kinds of carriers are available for electrokinetic chromatography along with different partition mechanisms. Among them, micellar electrokinetic chromatography, which employs an ionic micelle as a carrier, has become the most popular method because of its unique and attractive characteristics as well as the separating capability of electrically neutral or nonionic solutes in comparison with capillary zone electrophoresis. The present paper describes the principle, separation characteristics and its application to the analysis of pharmaceuticals.     

Selective and quantitative analysis of 4-hydroxybenzoate preservatives by microemulsion electrokinetic chromatography

A microemulsion electrokinetic chromatography (MEEKC) method has been developed and validated for the determination of 4-hydroxybenzoates and their impurities. These materials are commonly known as parabens and are widely used as preservatives in foods, cosmetics and pharmaceuticals. The method was shown to be selective and quantitative for the methyl, ethyl, propyl and butyl esters of 4-hydroxybenzoic acid. An internal standard, 4-hydroxyacetophenone, was employed to improve injection precision and detector linearity. In addition, 4-hydroxybenzoic acid, the major degradent, could also be monitored at the 0.1% (m/m) level. The method was successfully validated for assay and detection of the impurities in 4-hydroxybenzoic acid methyl ester and 4-hydroxybenzoic acid propyl ester samples and for the determination of 4-hydroxybenzoic acid methyl ester in a liquid pharmaceutical formulation. The determination of paraben content by MEEKC in a liquid sample was consistent with HPLC analysis. This work is the first reported validated MEEKC method and shows that the methodology can be successfully implemented into routine quality control testing.     

Comparison and prediction of the retention in micellar electrokinetic chromatography and microemulsion electrokinetic chromatography for disubstituted benzenes

Retention index (I), rather than retention factor (k), was found to be a more reasonable parameter for comparison of the relative affinity of disubstituted benzenes in MEEKC and MEKC, due to independent of I with the SDS surfactant concentration. MEKC and MEEKC may give similar or different I values, depending on types of moieties. With known I and K_ow for alkylbenzenes as references in MEKC and MEEKC, the values of K_ow for disubstituted benzenes can be estimated from the observed I values, where K_ow is the octanol–water distribution constant. In addition, a group additive approach can be used to predict I for disubstituted benzenes with different moieties from the average observed I for the disubstituted benzenes with same moieties. However, electronic effects and/or intramolecular interaction may result in the different observed I from prediction.     

Evaluation of a multiarray system for pharmaceutical analysis by microemulsion electrokinetic chromatography

A multiplexed capillary electrophoresis (CE) system equipped with 96 channels was evaluated for high-throughput screening in drug discovery by microemulsion electrokinetic chromatography (MEEKC). Method transfer from a single channel to a multichannel CE system is described. Loss of efficiency and reduced migration times could be elucidated to the poor efficacy in Joule heat dissipation by forced air cooling in the multiarray system compared to liquid cooling in the single channel instrument. On the other hand, only 48 channels could actually be used because of the maximum total current of 3 mA. Precision data remained below 8% and 9% for migration times and peak areas, respectively. Some UV-detector cross-talk interference between neighboring capillary channels was noted. Impurities at 0.5% compared to the main peak (100%) could be detected with the multiplexed system which is 10 times lower compared to the single capillary system. Higher efficiency and improved figures of merit (absolute sensitivity and no cross-talk interferences) were obtained by using an array of only 24 capillaries.     

A comparative study of microemulsion electrokinetic capillary chromatography and micellar electrokinetic capillary chromatography for the analysis of UV-absorbing compounds in human urine

Separations of human urine by microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic capillary chromatography (MEKC) with respect to resolution, migration times and efficiencies were optimized and compared. The optimised MEEKC and MEKC methods were simple and fast, both of which are excellent characteristics for the complex separations required in clinical and biomedical studies. However, resolution in MEKC was significantly greater than in MEEKC although migration times were 30% faster for the optimised MEEKC method. In addition, a faster analysis method (short-end injection) specifically for routine screening purposes was also investigated. With both MEEKC and MEKC modes, this provided short separations (less than 4 min for urine) with no major compromise in resolution. In conclusion, we found that MEEKC offered no real advantage over MEKC for urine analysis.     

Application of micellar and microemulsion electrokinetic chromatography for characterization of gallium(III) complexes of pharmaceutical significance

CE with conventional UV detection has recently been shown as a highly effective means to assaying cytotoxic gallium(III)-based compounds with regard to desirable drug-like properties such as the stability and binding to serum proteins. In this extension of that work, different CE techniques are used to further characterize a given set of gallium coordination compounds with established antiproliferating efficacy. Using free-zone CE mode, the electrophoretic profiles of complexes are recorded in order to assess their actual charge state under physiological buffer conditions. Micellar and microemulsion electrokinetic chromatographic techniques are tested as tools for the rapid estimation of the n-octanol-water partition coefficient (log P) that provides a rationale estimate of a drug's ability to cross biological membranes. A range of electrolyte buffer systems with varying (both in the nature and concentration) organic modifiers are examined to evaluate their effect on the relationship between experimental or calculated log P and the retention factors of compounds (log k'). Both methods were found to be better applicable for neutral than for cationic Ga complexes, the microemulsion mode demonstrating superior lipophilicity estimations as well as statistically meaningful log P versus log k' correlations when all the complexes were included in one regression set.     

Simultaneous determination of eleven preservatives in cosmetics by micellar electrokinetic chromatography

A new method for the simultaneous quantitation of 11 preservatives-imidazolidinyl urea, benzyl alcohol, dehydroacetic acid, sorbic acid, phenoxyethanol, benzoic acid, salicylic acid, and four parabens (methyl, ethyl, propyl, and butyl)-in cosmetics by micellar electrokinetic capillary chromatography was established and validated. The separation was performed using an uncoated fused-silica capillary (50 pm id x 60.2 cm, effective length 50 cm) with a running buffer consisting of 15 mmol/L sodium tetraborate, 60 mmol/L boric acid, and 100 mmol/L sodium dodecyl sulfate. A 1:10 dilution of the running buffer was used as the sample buffer to extract the cosmetic samples. The key factors, such as the concentration and pH of the running and sample buffers, which influence quantitative analysis of the above 11 preservatives in cosmetic samples, were investigated in detail. The linear ranges of the calibration curves for imidazolidinyl urea and the other 10 preservatives were 50-1000 and 10-200 mg/L, respectively. The correlation coefficients of the standard curves were all higher than 0.999. The recoveries at the concentrations studied ranged from 93.0 to 102.7%. RSDs were all less than 5%. The new method with simple sample pretreatment met the needs for routine analysis of the 11 preservatives in cosmetics.     

New possibilities of micellar electrokinetic chromatography and microemulsion electrokinetic chromatography in the determination of catechols and catecholamines in natural samples

New possibilities were revealed and evaluative characteristics were obtained for different versions of capillary electrophoresis with UV detection, namely, micellar electrokinetic chromatography with normal and reversed polarity and microemulsion electrokinetic chromatography, used for determining catechols and catecholamines in green and black tea and in urine.     

On-line pretreatment and determination of parabens in cosmetic products by combination of flow injection analysis, solid-phase extraction and micellar electrokinetic chromatography

A convenient and automated method for on-line pretreatment and determination of three parabens (i.e. methyl, ethyl and propyl p-hydroxybenzoate) in cosmetic products is proposed by using flow injection analysis (FIA), solid-phase extraction (SPE) and micellar electrokinetic chromatography (MEKC). An improved split–flow interface is used to couple SPE on C₈-bonded silica with MEKC separation, which can avoid running buffer contamination and reduce buffer consumption, especially, containing expensive reagents. The analytes are loaded onto a C₈ column at 0.6 mL/min for 60 s and eluted with a mixed eluent of 40% (v/v) 10 mmol/L sodium tetraborate buffer (pH 9.3) and 60% (v/v) ethanol at 0.75 mL/min. The MEKC separation is accomplished with a running buffer of 20 mmol/L sodium tetraborate (pH 9.3) containing 100 mmol/L sodium dodecyl sulfate (SDS) at 15 kV. For butyl p-hydroxybenzoate did not be detected in the cosmetic products, it was used as an internal standard (IS) added into the real samples. This FIA–SPE–MEKC method using IS allows the sample separation within 12 min and the sample throughput of five samples per hour with the relative standard deviation (R.S.D.) less than 2.3% (n = 5). The limits of detection (LOD) are in the range from 0.07 to 0.1 μg/mL (S/N = 3 and n = 11). The proposed method has been used to determine three parabens in real cosmetic products satisfactorily.     

Determination of piribedil in pharmaceutical formulations by micellar electrokinetic capillary chromatography

A fast and simple micellar electrokinetic capillary chromatographic method was developed for the analysis of piribedil in pharmaceutical formulations. The effects of buffer concentration, buffer pH, sodium dodecyl sulphate (SDS) concentration, organic modifier, applied voltage and injection time were investigated. Optimum results were obtained with a 50 mM borate buffer at pH 8.0 containing 50 mM SDS by using a fused silica capillary (50 m internal diameter, 72 cm effective length). The sample was injected hydrodynamically for 4 s at 50 mbar pressure and the applied voltage was +30 kV. The detection wavelength was set at 205 nm. Diflunisal was used as an internal standard. The analysis was performed at 25 °C and the total run time was 14 min. The method was suitably validated with respect to linearity range, limit of detection and quantification, precision, accuracy, specificity and robustness. The linear calibration range was 5–100 g mL^–1 and the limit of detection was determined as 1 g mL^–1. The method developed was successfully applied to the determination of piribedil in pharmaceutical formulations. The results were compared with a spectrophotometric method reported in the literature and no significant difference was found statistically.     

Simultaneous determination of sweeteners and preservatives in preserved fruits by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary method for the simultaneous determination of the sweeteners dulcin, aspartame, saccharin, and acesulfame-K and the preservatives sorbic acid; benzoic acid; sodium dehydroacetate; and methyl-, ethyl-, propyl-, isopropyl-, butyl-, and isobutyl-p-hydroxybenzoate in preserved fruits is developed. These additives are ion-paired and extracted using sonication followed by solid-phase extraction from the sample. Separation is achieved using a 57-cm fused-silica capillary with a buffer comprised of 0.05 M sodium deoxycholate, 0.02 M borate-phosphate buffer (pH 8.6), and 5% acetonitrile, and the wavelength for detection is 214 nm. The average recovery rate for all sweeteners and preservatives is approximately 90% with good reproducibility, and the detection limits range from 10 to 25 microg/g. Fifty preserved fruit samples are analyzed for the content of sweeteners and preservatives. The sweeteners found in 28 samples was aspartame (0.17-11.59 g/kg) or saccharin (0.09-5.64 g/kg). Benzoic acid (0.02-1.72 g/kg) and sorbic acid (0.27-1.15 g/kg) were found as preservatives in 29 samples.     

Application of response function methodology for the simultaneous determination of potential fragrance allergens and preservatives in personal care products using micellar electrokinetic chromatography

A micellar electrokinetic chromatography method was developed for determination of 15 suspected fragrance allergens and preservatives. The target compounds are widely used as ingredients in many personal care products, and all of them are included in the European Regulation concerning cosmetic products. The method was optimized by using a central composite experimental design and response surface methodology. A modified chromatographic response function was defined to weigh the terms in the response function adequately. After optimization of experimental conditions, a background electrolyte of 100 mM sodium dodecyl sulphate and 24 mM sodium tetraborate and pH 9.0 was selected for the separation of the analytes. The developed methodology was evaluated in terms of linearity, limits of detection and quantification, precision and accuracy, showing appropriate values (i.e., R ²?=?≥0.99 and accuracy of 89–115 %). Finally, applicability of the micellar electrokinetic chromatography method was assessed by successfully quantifying fragrance allergens and preservatives in commercial personal care products. The most commonly found analyte was linalool (48.3 % of samples) followed by benzoic acid (37.6 %). All samples contained at least one of the target compounds, thus confirming the ubiquity of fragrance allergens and preservatives in personal care products.

Enantioseparation of esbiothrin by cyclodextrin‐modified microemulsion and micellar electrokinetic chromatography

A comparison between chiral cyclodextrin‐modified microemulsion electrokinetic chromatography (CD‐MEEKC) and cyclodextrin‐modified micellar electrokinetic chromatography (CD‐MEKC) for the enantiomeric separation of esbiothrin was carried out. For both methods, the separation conditions were optimized by varying CD types and concentration, running buffer pH and compositions, organic modifiers, and temperature. The optimal CD‐MEEKC conditions were 0.8% n‐heptane, 2.3% SDS, 6.6% n‐butanol, 90.3% 10 mM sodium tetraborate containing 3% (w/v, the ratio of CD mass to microemulsion volume) methyl‐β‐cyclodextrin, pH 10, 25°C. The optimized CD‐MEKC conditions were 3.3% SDS, 96.7% 10 mM sodium tetraborate containing 5% (w/v) β‐CD, pH 10, 25°C. The difference in physicochemical properties of the buffer and CDs resulted in different optimal CD type. The competitive distribution between the microemulsion (or micelle) and chiral CD contributed to the chiral separation. Both methods provided excellent separation (R_s ～? 3) with similar migration time (ca. 15 min). CD‐MEEKC provided higher separation efficiencies (>300000) than CD‐MEKC (>200000). The LODs for CD‐MEEKC and CD‐MEKC were 4.7 μg/mL and 3.2 μg/mL, respectively. The RSDs of migration time and peak area for CD‐MEEKC were slightly higher than for CD‐MEKC. Both the demonstrated CD‐MEEKC and CD‐MEKC methods provided high efficiencies, low LODs, and reproducible enantioseparations of esbiothrin.     

Determination of preservatives in cosmetic products. I. Thin-layer chromatographic procedure for the identification of preservatives in cosmetic products

A thin-layer chromatographic procedure is presented for the separation and identification of preservatives that are listed in the current EEC Council Directive on cosmetic products or have been permitted in the past. The method consists of an extraction of acidified cosmetics with methanol, separation of the extracts by thin-layer chromatography on aluminium oxide and silica gel-coated plates using one developing solvent, and visualization of the preservatives on the plates using short-wavelength UV light and six detection reagents. The retention behaviour and the detectability of 88 preservatives were investigated, of which 74 were characterized by this method. The preservatives in fourteen commercial cosmetic products were tentatively identified by the procedure described. In general this method will permit the routine detection of preservatives in cosmetics in an approximate concentration of 0.1% (w/w).     

Pesticide analysis by micellar electrokinetic capillary chromatography

On-capillary sample concentration using sample stacking for the improvement of detection limits for various pesticides separated by micellar electrokinetic capillary chromatography was examined. The dependence of the stacking on different parameters was investigated. An approximately 30-fold preconcentration was achieved by applying sample stacking. Employing a two-step enrichment process (solid-phase extraction combined with sample stacking), detection limits were improved and the sample volume for SPE was reduced. In addition, the total time for the analysis was considerably reduced. Detection limits were between 0.01 and 0.1 ng/ml under these enrichment conditions.     

Pharmaceutical analysis using micellar electrokinetic capillary chromatography

The potential utility in pharmaceutical analysis of a capillary electrokinetic separation technique that employs a micellar "pseudo-stationary phase" is discussed and illustrated. Chromatograms of separations of vitamin metabolites and derivatized amino acids are presented to illustrate the high efficiency of the technique and the ability to simultaneously separate the charged and neutral components of pharmaceutical samples. The analytical characteristics of the technique and the importance of optimizing experimental parameters, such as surfactant concentration and capillary column diameter, are discussed and demonstrated with the aid of chromatograms.     

Selectivity in microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) is a most promising separation technique providing good selectivity and high separation efficiency of anionic, cationic as well as neutral solutes. In MEEKC lipophilic organic solvents dispersed as tiny droplets in an aqueous buffer by the use of surfactants provide a pseudo-stationary phase to which the solutes may have an affinity either to the surface or they may even partition into the droplets. When the droplets are charged, typically negatively, they will migrate opposite to the electroosmotic flow and hence separation of neutral solutes may take place. In the present paper focus has been set on how to change selectivity in MEEKC. Changes in the nature of surfactant as well as in pH have been shown to be powerful tools in changing the selectivity. The type of lipophilic organic phase is of less importance for the separation of fairly lipophilic solutes. Also changes in the temperature surrounding the capillary may alter the selectivity.