Isotopic exchange reactions between iron-sulphur-nitrosyl clusters and nitrite

The anion [Fe₄S₃(NO)₇]⁻ undergoes slow exchange with labelled nitrite [¹⁵NO₂]⁻ to yield a product [Fe₄S₃(¹⁴NO)(¹⁵NO)₆]⁻ in which complete isotopic exchange has occurred at the basal Fe(NO)₂ groups, but with no exchange at the apical Fe(NO) group. The neutral Fe₄S₄(NO)₄ reacts rapidly with [¹⁵NO₂⁻ to give fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and it is proposed that the conversion proceeds by fragmentation, followed by complete isotopic exchange and rapid reassembly. The binuclear anion [Fe₂S₂(NO)₄]²⁻ also yields, with [¹⁵NO₂]²⁻ in CD₂Cl₂ solution, the fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and a mechanism involving successive fragmentation, exchange and reassembly steps is proposed; however in aqueous solution, a clean exchange reaction occurs to give [Fe₂S₂(¹⁵NO)₄]²⁻. Neutral binuclear esters Fe₂(SR)₂(NO)₄ (R = Me, Et, or Ph) with [¹⁴NO₂]⁻ yield the mononuclear paramagnetic [Fe(¹⁴NO)₂(¹⁴NO₂)₂]⁻, and with [¹⁵NO₂]⁻ the analogous [Fe(¹⁵NO)₂(₁₅NO₂)₂]⁻.     

Simultaneous derivative spectrophotometric determination of thorium and uranium in a micellar medium

Derivative photometric methods for trace analysis of Th(IV) and UO₂(II), and their simultaneous determination in mixtures using 5,8-dihydroxy-1,4-naphthoquinone in a micellar medium are reported. Molar absorptivity and Sandell's sensitivity of 1:2 Th(IV) and 1:1 UO₂(II) complexes at their λ_max, 614.5 nm and 637.0 nm are, 1.19 × 10⁴ 1/mol/cm and 1.12 × 10⁴ 1/mol/cm and 1.95 × 10⁻² μg/cm² and 2.13 × 10⁻² μg/cm² μg/cm², respectively. Calibration graph is linear over the range 9.28 × 10⁻²−18.56 μg/ml of Th(IV) and 9.52 × 10⁻²−19.04 μg/ml of UO₂(II). Though presence of Th(IV) and UO₂(II) causes interference in each others determination, 9.28 × 10⁻¹−9.28 μg/ml Th(IV) and 9.52 × 10⁻¹−9.52 μg/ml UO₂(II) when present together, can be simultaneously determined using derivative spectra.     

Kinetics and mechanisms of the redox reaction of hexaaquotitanium(III) and the ethylenediamine tetraacetato titanium(III) complex by aqueous solutions of bromine

At 25°C, I = 1.0 M (CF₃SO₃⁻Li⁺+CF₃SO₃H), [H⁺] = 0.034–0.274 M and λ = 453 nm, the rate equation for the oxidation of Ti(H₂O), ₆³⁺ by bromine was found to be: −d/[Br₂]T/dt=kK/[Br₂][Ti^III]/[H⁺]+K+kK/[Br₃⁻][Ti^III]/[H⁺+K, where k = 9.2 × 10⁻³ M ⁻¹ s ⁻¹ and K = 4.5 × 10⁻³ M. At [H⁺] = 1.0 M, [Br⁻] = 0.05–0.4 M, the apparent second-order rate constant decreases as [Br⁻] increases.

The pH-dependence of the oxidation of Ti^III-edta by bromine is interpreted in terms of the change in identity of the Ti^III-edta species as the pH of the reaction medium changes. The second-order rate constants were fitted using a non-linear least-square computer program with (1/k₀^edta)² weighting into an equation of the form: k₀^edta =k₁+k₂K₁[H⁺]⁻¹+k₃K₁K₂[H⁺]^−2/1+K₁[H⁺[H⁺⁻¹+K₁K₂[H⁺]⁻², with K₁ and K₂ fixed as earlier determined at 9.55 × 10⁻³ and 2.29 × 10⁻⁹ M, respectively, for the oxidation of bromine. k₁=k₂=(3.1±0.32)×10³M⁻¹s⁻¹ k₃=(2.3±0.45)×10⁶N⁻¹s⁻¹.

It is proposed that these electron transfer reactions proceed by univalent changes with the production of Br₂^.− as a transient intermediate. An outer-sphere mechanism is proposed for these reactions. The homonuclear exchange rate for Ti^III-edta+Ti^IV-edta is estimated at 32 M⁻¹ s⁻¹.     

Time-resolved vibrational cemiluminescence: Rate constants for the reaction F + HC1 → HF + Cl and for the relaxtion of HF(v = 3) by HCl, CO2, N2O, CO, N2 and O2

The reaction: F + HCl→ HF (v 3) + Cl (1), has been initiated by photolysing F₂ using the fourth-harmonic output at 266 nm from a repetitively pulsed Nd: YAG laser By analysing the time-dependence of the HF(3,0) vibrational chemiluminescence, rate constants have been determined at (296 ± 5) K for reaction (1), k₁ = (7.0 ± 0.5) × 10⁻¹² cm³ molecule⁻¹ s⁻¹, and for the relaxation of HF(v = 3) by HCl, CO₂, N₂O, CO, N₂ and O₂: k_HCl = (1.18 ±0.14) × 10⁻¹¹ k_CO2 = (1.04 ± 0. 13) × 10⁻¹², k_N2O = (1.41 ± 0.13) × 10⁻¹¹ k_CO = (2.9 ± 0.3) × (10⁻¹², k_N2 = (7.1 ± 0.6) × 10⁻¹⁴ and k_O2 = (1.9 ± 0.6) × 10⁻¹⁴ cm³molecule⁻¹s⁻¹.     

Kinetic study of gas-phase Lu(D3/2) with O2, N2O and CO2

The second-order rate constants of gas-phase Lu(²D_3/2) with O₂, N₂O and CO₂ from 348 to 573 K are reported. In all cases, the reactions are relatively fast with small barriers. The disappearance rates are independent of total pressure indicating bimolecular abstraction processes. The bimolecular rate constants (in molecule⁻¹ cm³ s⁻¹) are described in Arrhenius form by k(O₂)=(2.3±0.4)×10⁻¹⁰exp(−3.1±0.7 kJmol⁻¹/RT), k(N₂O)=(2.2±0.4)×10⁻¹⁰exp(−7.1±0.8 kJmol⁻¹/RT), k(CO₂)=(2.0±0.6)×10⁻¹⁰exp(−7.6±1.3 kJmol⁻¹/RT), where the uncertainties are ±2σ.     

Gas phase hydrogen deuterium exchange reactions of a model peptide: FT-ICR and computational analyses of metal induced conformational mutations

We utilized gas phase hydrogen/deuterium (H/D) exchange reactions and ab initio calculations to investigate the complexation between a model peptide (Arg-Gly-AspRGD) with various alkali metal ions. The peptide conformation is drastically altered upon alkali metal ion complexation. The associated conformational changes depend on both the number and type of complexing alkali metal ions. Sodium has a smaller ionic diameter and prefers a multidentate interaction that involves all three amino acids of the peptide. Conversely, potassium and cesium form different types of complexes with the RGD. The [RGD + 2Cs − H]⁺ species exhibit the slowest H/D exchange reactivity (reaction rate constant of 6 × 10⁻¹³ cm³molecule⁻¹s⁻¹ for the fastest exchanging labile hydrogen with ND₃). The reaction rate constant of the protonated RGD is two orders of magnitude faster than that of the [RGD + 2Cs − H]⁺. Addition of the first cesium to the RGD reduces the H/D exchange reaction rate constant (i.e., D₀) by a factor of seven whereas sodium reduces this value by a factor of thirty. Conversely, addition of the second alkali metal ions has the opposite effect; the rate of D₀ disappearance for all [RGD + 2Met − H]⁺ species (MetNa, K, and Cs) decreases with the alkali metal ion size.     

Separation of metal ions by capillary electrophoresis

A number of experimental parameters have been optimized for the separation of 26 metal ions, including alkali, alkaline earth, transition and lanthanide metal ions. Experimental parameters that were evaluated included nature of indirect-detection reagent, pH of electrolyte, concentration of complexing agent and nature of the surface of the capillary; unbonded and C₁ and C₁₈ bonded phases were studied. In addition the effect of internal diameter on linearity and signal-to-noise ratio was examined, and separation efficiency was determined for a variety of experimental conditions. Detection limits (signal-to-noise RATIO = 3) were ca. 1 μg/ml for the lanthanides, ca. 0.6 μg/ml for transition and alkaline earth ions and ca. 0.1–0.8 μg/ml for alkali metal ions. The average relative standard deviations of were 3.7, 5.1 and 2.5% on unbonded, C₁ and C₁₈ capillaries, respectively. Whereas conventional regression analysis suggested that the calibration curves were linear over the range of 1·10⁻⁵ to 4·10⁻⁴ mol/l, sensitivity plots showed that the results were actually linear to within 6% only over the range of 2.5·10⁻⁵ to 4·10⁻⁴ mol/l.     

Liquid-state membrane electrode sensitive to bismuth(III)

A liquid ion-exchange electrode containing a tetrachloraethane solution of the complex of bismuth(III) with 5-mercapto-3-(naphthyl-1)-1,3,4-thiadiazol-2-thione is described. The electrode is sensitive to Bi³⁺. The slope of the calibration graph (electrode potential vs. concentration) is 18.7 mV/pBi in the pBi range 6.5–9.5 in ammonium acetate buffer (pH = 4.0). Bivalent cations and Al(III), Fe(III) and Th(IV) do not interfere (K_{Bi³⁺+,M²⁺}<10⁻⁵). The dissociation constant of bismuth acetate has been determined with the aid of the electrode.     

Rates of the reactions CN + H2CO and NCO + H2CO in the temperature range 294–769 K

The rate coefficients of the reactions: (1) CN + H₂CO → products and (2) NCO + H₂CO → products in the temperature range 294–769 K have been determined by means of the laser photolysis-laser induced fluorescence technique. Our measurements show that reaction (1) is rapid: k₁(294 K) = (1.64 ± 0.25) x 10⁻¹¹ cm³ molecule⁻¹ s⁻¹; the Arrhenius relation was determined as k₁ = (6.7 ± 1.0) x 10⁻¹¹ exp[(−412 ± 20)/T] cm³ molecule⁻¹ s⁻¹. Reaction (2) is approximately a tenth as rapid as reaction (1) and the temperature dependence of k₂ does not conform to the Arrhenius form: k₂ = 4.62 x 10⁻¹⁷T^1.71 exp(198/T) cm³ molecule⁻¹ s⁻¹. Our values are in reasonable agreement with the only reported measurement of k₁; the rate coefficients for reaction (2) have not been previously reported.     

Synthesis, characterization and magnetic properties of novel μ-isophthalato oxovanadium(IV) binuclear complexes

Four novel oxovanadium(IV) binuclear complexes have been synthesized, namely [(VO)₂(IPHTA) (L)₂SO₄ (L denotes 2,2′-bipyridine (bpy); 1,10-phenanthroline (phen); 4,4′-dimethyl-2,2′-bipyridine (Me₂bpy) and 5-nitro-1,10-phenanthroline (NO₂-phen)), where IPHTA is the isophthalate dianon. Based on elemental analyses, molar conductivity measurements, IR and electronic spectra studies, it is proposed that these complexes have IPHTA-bridged structures and consist of two vanadium(IV) atoms in a square-pyramidal environment. The complexes [(VO)₂(IPHTA)(Me₂bpy)₂]SO₄ (1) and [(VO)₂(IPHTA)(bpy)₂]SO₄ (2) were characterized by variable temperature magnetic susceptibility (4–300 K) and the data could be well fitted by the least-squares method to a susceptibility equation derived from the spin Hamiltonian operator, . The exchange integral, J, was found to be −26.8 cm⁻¹ for (1) and −31.0 cm⁻¹ for (2). These results are commensurate with antifferomagnetic interactions between two oxovanadium(IV) ions within each molecule. The influence of different terminal ligands on magnetic interactions between the metals of this kind of complexes is also discussed.     

Dual-analyte spectroscopic sensing in sol-gel derived polyelectrolyte-silica composite thin films

Ferrozine (3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine-p,p′-disulfonic acid, monosodium salt hydrate), an iron indicator, and HTPS (8-hydroxyl-1,3,6-pyrenetrisulfonic acid, trisodium salt), a pH indicator, were immobilized in sol–gel derived PDMDAAC-SiO₂ (where PDMDAAC stands for poly(dimethyldiallylammonium chloride), composite thin films via ion-exchange. The two indicators were immobilized in two adjacent sections of the same PDMDAAC-SiO₂ film which was supported on a glass optical substrate. The spectroscopic response of the film to both Fe²⁺ and H⁺ in solutions was investigated by attenuated total reflection (ATR) spectrometry at two well-separated wavelengths, 562 nm for Fe²⁺ and 460 nm for H⁺. The Ferrozine/HPTS immobilized PDMDAAC-SiO₂ films had the following characteristics: linear range, 2.5×10⁻⁶–5.0×10⁻⁵ M for Fe²⁺, pH 4.1–6.8 for H⁺; sensitivity, 2.2×10⁴ ΔA/M for Fe²⁺, 0.583 ΔA/pH for H⁺.     

Thiocyanato adducts of chromium(II) carboxylates and the molecular structure of tetraethyl-ammonium tetra-μ-propionatodiisothio-cyanatodichromate(II)

X-Ray crystallographic studies on [NEt₄]₂[Cr₂[(O₂CC₂H₅)₄(NCS)₂] show that the Cr–Cr separation (2.467Å) in the dinuclear anion is one of the longest known. The thiocyanato groups are N-bonded, and the results emphasize the known sensitivity of the quadruple Cr–Cr bond to the nature of the axial ligands. The compound crystallises in the tetragonal space group P4/mnc with two molecules per unit cell, the dimensions of which are a = b = 9.785(1), c = 21.186(2) Å. Magnetic investigations from room to liquid nitrogen temperature on the tetra-μ-propionato complex and on [NMe₄]₂ [Cr₂(O₂CCH₃)₄(NCS)₂] show that both complexes have been obtained free from paramagnetic chromium(III) impurities. Their weak paramagnetic susceptibilities (X_cr is approx. 200 x 10⁻⁶ cm³ mol⁻¹ at 295 K and 50 x 10⁻⁶cm³mol⁻¹ at 90 K) are inherent, and are ascribed to temperature independent paramagnetism at low temperature plus para-magnetism arising from slight population of the triplet state (2J 700 cm⁻¹, g = 2, N = 50 x 10⁻⁶cm³mol⁻¹) at higher temperatures.     

Role of axial ligation on potentiometric response of Co(III) tetraphenylporphyrin-doped polymeric membranes to nitrite ions

Two types of Co(III) tetraphenylporphyrins, Co(III)TPPX (I) and Co(III)(N)TPPX (II), where X = C1⁻ or NO⁻₂ and N = C₅H₅N or C₆H₅CH₂C₅H₄N, are used as ionophores to prepare nitrite responsive polymeric membrane electrodes. The influence of the initial axial ligand (X⁻ and N) on the operative ionophore mechanism of these metalloporphyrins within the solvent polymeric membranes is examined. Results from potentiometric and electrodialysis experiments suggest that in the presence of nitrite in the test sample and internal solution, both types of Co (III) porphyrins studied (I and II) act as neutral carriers and that the addition of lipophilic cationic sites (e.g., tridodecylmethylammonium ions (TDMA⁺)) to the organic membrane is essential to improve the selectivity and long term stability of sensors prepared with these species. Membranes formulated with (I) or (II) in the nitrite form along with TDMACl in plasticized PVC films exhibit the following selectivity sequence: SCN⁻ > NO⁻₂ ˜ C1O⁻₄ > Sal⁻ > NO⁻₃ > Br⁻ > C1⁻. Membrane electrodes with added lipophilic cationic sites are shown to exhibit rapid, fully reversible and Nernstian response towards nitrite ions in the concentration range of 10⁻¹–10⁻⁵ M, with good long term stability.     

Das perfluortriazinium-kation als oxidationsmittel in der metallorganischen synthese—ein neuer weg zur darstellung von [Cp2MCl2](M = Mo

The oxidation of Cp₂MCl₂ (M= Mo, W) with perfluortriazinium tetrafluoroborate, [(FCN)₃F]⁺[BF₄]⁻, in the presence of a flouride ion acceptor (BF₃ or PF₅) in SO₂ solution yielded the cationic metallocene complexes [Cp₂MCl ₂]²⁺[BF₄]⁻ or [C_p2MCl₂] ²⁺[BF₄]⁻[PF₆]⁻ (M = Mo, W), respectively. In these reactions, for the first time the perfluortriazinium cation has proved to be easy to handle and a useful oxidizer in organometallic chemistry. The oxidizer strength of three fluorotriazinium cations, [(XCN)₃F]⁺ (X = F, Cl, H), has been computed ab initio (HF/6 − 31 + G) and calibrated on literature data which were obtained by local density functional calculations. It was anchored to its F⁺ zero point by an experimental value for KrF⁺. ab]Die Oxidation von Cp²MCl₂ mit (M = MO, W) Perfluortriaziniumtetrafluoroborat, [(FCN)₃F]⁺[BF₄]⁻, in Anwesenheit eines Fluoridionenakzeptors (BF₃ oder PF₅) führte in SO₂-Lösung zur Bildung der kationischen Metallocen-Komplexe [Cp₂MCl₂₊]²⁺[BF₄]₂⁻ bzw. [Cp₂MCl₂]²⁺[BF₄]⁻ [PF₆]⁻ (M = Mo, W). In diesen Reaktionen konnte erstmals gezeigt werden, daß Perfluortriazinium-Kationen einfach zu handhabende und nützliche Oxidationsmittel im Bereich der metallorganischen Synthese darstellen. Das (Mdationsvermögen von drei Fluorotriazinium-Kationen, [(XCN)₃F]⁺(X = F, Cl, H), wurde ab initio berechnet (HF/6 − 31 + G) und mit Hilfe von Literaturdaten, die mittels local density functional-Berechnungen erhalten und am experimentellen Wert von KrF ⁺ bezüglich des F⁺ Nullpunktes verankert wurden, kalibriert.     

Comparison of the effects of visible femtosecond laser pulses and continuous wave laser radiation of low average intensity on the clonogenicity of Escherichia coli.

To evaluate the contribution of local pulsed heating of light-absorbing microregions to biochemical activity, irradiation of Escherichia coli was carried out using femtosecond laser pulses (λ = 620 nm, τ_p=3 × 10⁻¹³ s, f_p = 0.5 Hz, E_p = 1.1 × 10⁻³J cm⁻², I_av = 5.5 × 10⁻⁴ W cm⁻², I_p = 10⁹ W cm⁻²) and continuous wave (CW) laser radiation (λ = 632.8 nm, I = 1.3 W cm⁻²). The irradiation dose required to produce a similar biological effect (a 160%–190% increase in the clonogenic activity of the irradiated cells compared with the non-irradiated controls) is a factor of about 10³ lower for pulsed radiation than for CW radiation (3.3 × 10⁻¹ and 7.8 × 10² J cm⁻² respectively). The minimum size of the microregions transiently heated on irradiation with femtosecond laser pulses is estimated to be about 10 Å, which corresponds to the size of the chromophores of hypothetical primary photoacceptors—respiratory chain components.     

Synthesis, crystal structure and third-order non-linear optical property of heterobimetallic cluster compound [MoOICu3S3(2,2′-bipy)2]

Nest-shaped cluster [MoOICu₃S₃(2,2′-bipy)₂] (1) was synthesized by the treatment of (NH₄)₂MoS₄, CuI, (n-Bu)₄NI, and 2,2′-bipyridine (2,2′-bipy) through a solid-state reaction. It crystallizes in monoclinic space group P2₁/n, a=9.591(2) Å, b=14.820(3) Å, c=17.951(4) Å, β=91.98(2)°, V=2549.9(10) ų, and Z=4. The nest-shaped cluster was obtained for the first time with a neutral skeleton containing 2,2′-bipy ligand. The non-linear optical (NLO) property of [MoOICu₃S₃(2,2′-bipy)₂] in DMF solution was measured by using a Z-scan technique with 15 ns and 532 nm laser pulses. The cluster has large third-order NLO absorption and the third-order NLO refraction, its ₂ and n₂ values were calculated as 6.2×10⁻¹⁰ and −3.8×10⁻¹⁷ m² W⁻¹ in a 3.7×10⁻⁴ M DMF solution.     

Kinetics of the autoxidation of vitamin A catalysed by cobalt ion

Vitamin A,dissolved in liquid paraffin, is stable below room temperature, but suffers oxidative decomposition at 80°, giving its epoxide as the main product. The rate of decomposition of vitamin A (V_A) at 80° in the presence of oxygen (partial pressure of p) and a small amount of cobaltous stearate (Co) is expressed as: d[V_A]/dt = 3·15 × 10⁻¹:[V_A][Co] p^1·48 + 1·51 × 10⁻⁵[V_A]p^0·33 + 0·33 × 10⁻⁵[V_A], where the last term represents the spontaneous thermal decomposition.     

Rate constants for the reaction of OH radicals with CH3CN, C2H5CN AND CH2=CH-CN in the temperature range 298–424 K

Rate constants for the reactions of OH with CH₃CN, CH₃CH₂CN and CH₂=CH-CN have been measured to be 5.86 × 10⁻¹³ exp(−1500 ± 250 cal mole⁻¹/RT), 2.69 × 10⁻¹³ exp(−1590 ± 350 cal mole⁻¹/RT and 4.04 × 10⁻¹² cm³ molecule⁻¹ s⁻¹, respectively in the temperature range 298–424 K. These results are discussed in terms of the atmospheric lifetimes of nitrfles.     

Acidity constants of benzidine in aqueous solutions

The acidity constants of benzidine (Bz) in aqueous solutions determined potentiometrically at 25° were K_a1 = (1.11 ± 0.08) × 10⁻⁵, K_a2 = (1.45 ± 0.12) × 10⁻⁴. The apparent mixed constants in 0.1M sodium nitrate are K_a1 = (5.37 ± 0.28) × 10⁻⁶ and K_a2 = (1.14 ± 0.09) × 10⁻⁴. The ultraviolet spectra were recorded as a function of pH and analysed with these constants to obtain the absorption spectra of H₂Bz²⁺, HBz⁺ and Bz; the corresponding wavelengths of maximal absorption are 247, 273 and 278 nm, and molar absorptivities 1.63 × 10⁴, 1.76 × 10⁴ and 2.26 × 10⁴ 1.mole⁻¹.cm⁻¹.     

Calorimetric study on oxidation of alumina supported rhodium by dioxygen

Rhodium particles in nanometer size were prepared by impregnating alumina powders with aqueous solutions containing rhodium salts. The dispersion (D) of rhodium crystallites on the prepared samples was estimated by dioxygen adsorption measured at 300 K. Phenomena of oxidizing the supported crystallites with 2.5 × 10⁴ Pa O₂ in a temperature range between 280 and 870 K were calorimetrically studied. Extent of oxidation may be distinguished into three stages, i.e., adsorption on surface (T < 300 K), progressive penetration into bulk, and formation of a stable bulk oxide (T> 700 K), on raising the oxidation temperature. Heat of dioxygen adsorption varies only slightly with the dispersion (D) of rhodium and has a value of 294 ± 6 kJ (mol O₂)⁻¹. Chemical stoichiometry of the bulk oxide formed, however, varies with the dispersion of rhodium crystallites. A dioxide (RhO₂) (_f H = 225 ± 3 kJ (mol O₂)⁻¹) and a sesquioxide (Rh₂O₃) (_f H = 273 ± 3 kJ (mol O₂)⁻¹) was formed at D < 60% and D> 80%,