Intercalation of n-alkyltrimethylammonium ions into layered calcium octyl phosphates thermally treated in vacuo

Layered calcium octyl phosphate (CH3(CH2)7OPO3Ca.1.6H2O: CaOP), which is composed of a multilayer alternating bilayer of octyl phosphates and a dicalcium phosphate dihydrate (DCPD)-like phase, was thermally treated in vacuo and the intercalation of n-alkyltrimethylammonium ions into the materials was examined. The octyl groups in the layer were eliminated by outgassing above 250 degrees C to give the amorphous calcium phosphates. Further, the specific surface area was steeply increased and mesopores with a diameter of ca. 2.0 nm were formed. IR results indicated that the surface P-OH groups were generated by outgassing at 250 degrees C. When the CaOP outgassed at 250 degrees C was treated with n-alkyltrimethylammonium ion solutions (carbon number of alkyl group, n=14-18), three XRD peaks reappeared below 2theta=15 degrees and the d-spacing ratio of these peaks was 1:1/2:1/3. These facts indicate that the n-alkyltrimethylammonium ions were intercalated into the amorphous calcium phosphate phases.     

Synthesis and characterisation of new titanium amino-alkoxides: precursors for the formation of TiO2 materials

Reaction of the amino-alkoxides HOCH(CH(2)NMe(2))(2) (Hbdmap) and HOC(CH(2)NMe(2))(3) (Htdmap) with [Ti(OR)(4)] yields a series of heteroleptic titanium alkoxides [Ti(OR)(4-n)(L)(n)] (L = bdmap, tdmap). Substitution of the monodentate alkoxide with the chelating alkoxides becomes progressively more difficult, with homogeneous products being obtained only for n = 1, 2. The structure of [Ti(OEt)(3)(bdmap)](2), a mu-OEt bridged dimer, has been determined. Hydrolysis of [Ti(OR)(2)(L)(2)], by adventitious moisture affords the dimeric oxo-alkoxides [Ti(O)(L)(2)](2), both of which have been characterised crystallographically. These two compounds have also been prepared by reaction of [Ti(NMe(2))(2)(L)(2)] with the hydrated metal salts [Zn(acac)(2).2H(2)O] and [Zn(OAc)(2).2H(2)O] using the intrinsic water molecules in these salts to react with the labile amido groups, though the former also produces Me(Me(2)N)C=C(H)C(O)Me from reaction of liberated HNMe(2) with the coordinated acac ligand, while the latter also affords the ligand exchange product [Zn(OAc)(bdmap)]. In neither case does the free dimethylamino group of [Ti(O)(L)(2)](2) coordinate a second metal. The dimeric structure of [Zn(OAc)(bdmap)](2) has been established, and the structure of the tetrameric oxo-alkoxide [Ti(O)(OPr(i))(OCH(2)CH(2)NMe(2))](4) is reported for comparison with others in this study. [Ti(OEt)(3)(bdmap)](2) has been used as a precursor in AACVD (Aerosol-Assisted Chemical Vapour Deposition) to generate amorphous TiO(2) films on glass at 440 degrees C, and TiO(2)@C nanoparticles of approximate diameter 350 nm with a carbon coating of width ca. 75 nm on heating in a sealed container at 700 degrees C.     

Preparation and some properties of organically modified layered alkali titanates with alkylmethoxysilanes

The silylation of K2Ti4O9 x nH2O with organosilanes (methyl, n-butyl, n-octyl, n-dodecyl, n-octadecyltrimethoxysilanes and n-octadecyldimethylmethoxysilane) was conducted using the octylammonium-exchanged form as the intermediate. The surface coverage of the octadecylsilylated derivative was controlled by changing the employing amounts of octadecyltrimethoxysilane. The swelling behaviors of the octyl, dodecyl, and octadecylsilylated derivatives in organic solvents were investigated to show that the degree of the swelling varies depending on the kind of solvents, the alkyl chain length of the attached alkylsilyl groups, and the surface coverage. The octadecylsilylated derivative with the largest surface coverage was converted to film with a thickness of ca. 500 nm by casting the chloroform suspension on a substrate. The octadecylsilylated derivative showed a reversible thermoresponsive change of the basal spacing by ca. 0.5 nm in the temperature range between 15 and 60 degrees C.     

Synthesis and Characterization of a New Quasi-One-Dimensional Copper(II) Phosphate, Ba(2)Cu(PO(4))(2)

Crystals of Ba(2)Cu(PO(4))(2) have been grown in a low-temperature eutectic flux of 32% KCl and 68% CuCl (mp = 140 degrees C). The X-ray single-crystal structure analysis shows that this barium copper(II) phosphate crystallizes in a monoclinic lattice with a = 12.160(4) ?, b = 5.133(4) ?, c = 6.885(4) ?, beta = 105.42(4) degrees, and V = 414.3(4) ?(3); C2/m (No. 12); Z = 2. The structure has been refined by the least-squares method to a final solution with R = 0.020, R(w) = 0.026, and GOF = 1.05. The framework of the title compound consists of [Cu(PO(4))(2)](infinity) linear chains with Ba(2+) cations residing between these parallel chains. The chains are composed of an array of Cu(2+) cations that are doubly bridged by PO(4) anions. Each pair of bridging PO(4) tetrahedra are in a staggered configuration above and below the CuO(4) square plane, resulting in a linear chain with a long Cu---Cu separation distance, 5.13 ? ( identical withb). This quasi-one-dimensional framework is unusual among the Cu(2+)-based phosphates. Magnetic susceptibility data shows Curie-Weiss paramagnetic behavior in the range of ca. 190-300 K and a possible antiferro-to-ferromagnetic transition at approximately 8 K. In this paper, the synthesis, structure, and properties of the title compound are presented. A structural comparison to a closely related vanadyl (VO)(2+) phosphate, Ba(2)(VO)(PO(4))(2).H(2)O, as well as Na(2)CuP(2)O(7) will be discussed.     

Synthesis of a single four-ring (S4R) molecular zinc phosphate and its assembly to an extended polymeric structure: a single-crystal and in-situ MAS NMR investigation

A reaction of ZnO, HCl, H(3)PO(4), and 2-pyridylpiperazine in THF/H(2)O mixture at 75 degrees C for 72 h produces a new zinc phosphate, [(C(5)NH(5))(C(4)N(2)H(10))][Zn(H(2)PO(4))(2)(HPO(4))], I. Zinc phosphate I consists of single four-ring (S4R) units with terminal phosphoryl groups hanging from the Zn center. On reaction with zinc acetate dihydrate in the presence of water at 100 degrees C, I gave another new zinc phosphate, [(C(5)NH(5))(C(4)N(2)H(10))][Zn(2)(H(2)PO(4))(HPO(4))(PO(4))] x 2H(2)O, II. II has a layer structure with apertures formed by 4- and 8-T atoms (T = Zn, P). An examination of the two structures reveals that I and II are related, II being formed by the direct addition of Zn(2+) ions to I. Room-temperature (31)P MAS NMR studies show the presence of different phosphorus species in both compounds. An in-situ (31)P MAS NMR investigation on the formation of II from I in the presence of Zn(2+) ions and water reveals the transformation to be facile. What is noteworthy in this study is that the structural integrity of the S4Rs has been maintained during the formation of II. Donor-acceptor hydrogen bond interactions and pi-pi interactions involving the pyridyl groups also appear to play subtle roles in both phosphates. This study, the first attempt of its kind, combines the principles of supramolecular organic chemistry with inorganic building units and contributes to our understanding of the formation of framework solids.     

The role of hydrogen bonding in the crystal structures of zinc phosphate hydrates

The compounds alpha- and beta-hopeite have been synthesised by hydrothermal crystallisation from aqueous solution at 90 degrees C and 20 degrees C, respectively. The crystal structures of these polymorphic forms of zinc phosphate tetrahydrate (ZPT), Zn(3)(PO(4))(2).4 H(2)O, have been resolved. Single-crystal analysis proves that the main difference between the alpha and beta forms of ZPT is caused by the difference in orientation of one of the water molecules in the ZnO(6) octahedral network, indicating two different hydrogen-bonding patterns. A previously unknown hopeite, Zn(3)(HPO(4))(3).3 H(2)O (ZHPT), has been isolated and analysed. This helps to achieve a better understanding of the mechanism of formation of zinc phosphate compounds. Unambiguous identification of each phase is established by analysis of their unique thermal behaviour and thermodynamic interrelationship.     

Preparation and exfoliation of layered titanium butyl phosphates

Titanium butyl phosphates (TiBP) synthesized by reacting Ti(SO₄)₂ with a mixture of mono-(C₄H₉PO₄H₂) and dibutyl phosphates ((C₄H₉)₂PO₄H) in aqueous ethanol solution at 25 °C were characterized by various conventional techniques. XRD pattern of TiBP possessed a peak at 2θ?=?5.5° and a broad hump at 2θ?=?15–30°. This fact indicated that the material was composed of a multilayer alternating bilayer of butyl groups of the phosphates and amorphous titanium phosphate phase. The TiBP was spherical particles with a size of ca. 100 nm and the chemical formula of this material was Ti((C₄H₉O)₂PO₂)_x(C₄H₉OPO₃)_y(OH)_z. The TiBP possessed a UV absorption property due to charge transfer of O^2? ? Ti⁴⁺. The layered structure of TiBP was exfoliated in ethanol at 25 °C up to TiBP concentration of 1.0?×?10⁵ ppm to form nanosheet. The nanosheet dispersing solution exhibited a UV absorption property and the property depends on nanosheet concentration.     

Di-tert-butyl phosphate as synthon for metal phosphate materials via single-source coordination polymers [M(dtbp)(2)](n) (M = Mn,Cu) and [Cd(dtbp)(2)(H2O)](n) (dtbp-H = (tBuO)(2)P(O)OH)

Reaction of M(OAc)(2).xH(2)O (M = Mn, Cu, or Cd) with di-tert-butyl phosphate (dtbp-H) in a 1:2 molar ratio in methanol followed by slow crystallization of the resultant solid in MeOH/THF medium results in the formation of three new polymeric metal phosphates [M(dtbp)(2)](n)() [M = Mn, 1 (beige); M = Cu, 2 (blue)] and [Cd(dtbp)(2)(H(2)O)](n)(), 3 (colorless)] in good yields. The formation of [Mn(dtbp)(2)](n) (1) proceeds via tetrameric manganese phosphate [Mn(4)(O)(dtbp)(6)] (4), which has been isolated in an analytically pure form. Perfectly air- and moisture-stable compounds 1-4 were characterized with the aid of analytical, thermoanalytical, and spectroscopic techniques. The molecular structures of 1-3 were further established by single-crystal X-ray diffraction studies. Crystal data for 1: C(32)H(72)Mn(2)O(16)P(4), monoclinic, P2(1)/c, a = 19.957(4) A, b = 13.419(1) A, c = 18.083(2) A, beta = 91.25(2) degrees, Z = 4. Crystal data for 2: C(16)H(36)CuO(8)P(2), orthorhombic, Pccn, a = 23.777(2) A, b = 10.074(1) A, c = 10.090(1) A, Z = 4. Crystal data for 3: C(48)H(114)Cd(3)O(27)P(6), triclinic, P1, a = 12.689(3) A, b = 14.364(3) A, c = 22.491(5) A, alpha = 84.54(3) degrees, beta = 79.43(3) degrees, gamma = 70.03(3) degrees, Z = 2. The diffraction studies reveal three different structural forms for the three compounds investigated, each possessing a one-dimensional coordination polymeric structure. While alternating triple and single dtbp bridges are found between the adjacent Mn(2+) ions in 1, uniform double dtbp bridges across the adjacent Cu(2+) ions are present in 2. The cadmium ions in the structure of 3 are pentacoordinated. Thermal analysis (TGA and DSC) indicates that compounds 1-3 convert to the corresponding crystalline metaphosphate materials M(PO(3))(2), in each case at temperatures below 500 degrees C. Similarly, the thermal decomposition of 4 results in the formation of Mn(PO(3))(3) and Mn(2)P(2)O(7). The final materials obtained by independent thermal decomposition of bulk samples have been characterized using IR spectroscopic, powder diffraction, and N(2) adsorption studies.     

Sandbed Consolidation with Mineral Precipitation

A new method has been developed to prevent sand reentrainment during oil production from unconsolidated or poorly consolidated reservoir formations. Consolidation of the zformation around the well is achieved through in situ precipitation of a sparingly soluble salt, namely, calcium phosphate. Control of the depth of salt formation is achieved by alternating injection, mixing, and reaction of two aqueous solutions of calcium chloride and potassium phosphate. Calcium phosphate crystals precipitate and grow on the grain surfaces, forming sufficiently uniform coatings. The formation of relatively uniform coatings on the grains causes an acceptably small decrease of the permeability, which is a feature of primary importance for oil production. The grains are gradually "cemented" with bridges of calcium phosphate crystallites and form a consolidated and still porous structure. As a result, the rate of hydrocarbon production for the problematic reservoir can be increased considerably without undesirable reentrainment of sand. The proposed method for consolidation has been successfully tested in sandbeds. Several series of experiments have been carried out under diverse conditions to establish the optimum parameter values for the implementation of this method. A set of optimum conditions at 25 degrees C were determined and these conditions gave satisfactory consolidation with permeability loss of ca. 60% of the initial value. The conditions of precipitation were chosen so that the precipitated phase was octacalcium phosphate [Ca(4)H(PO(4))(3).2.5H(2)O], along with its byproduct hydroxyapatite [Ca(5)(PO(4))(3)OH]. Experiments were also carried out at 70 degrees C and have shown that it is feasible to consolidate loose sandpacks at oil reservoir conditions. Copyright 2000 Academic Press.     

Mononuclear titanium(IV)-citrate complexes from aqueous solutions: pH-specific synthesis and structural and spectroscopic studies in relevance to aqueous titanium(IV)-citrate speciation

Titanium is a metal frequently employed in a plethora of materials supporting medical applications. In an effort to comprehend the involvement of titanium in requisite biological interactions with physiological ligands, synthetic efforts were launched targeting aqueous soluble species of Ti(IV). To this end, aqueous reactions of TiCl(4) with citric acid afforded expediently, under pH-specific conditions, the colorless crystalline materials Na(6)[Ti(C(6)H(4.5)O(7))(2)(C(6)H(5)O(7))].16H(2)O (1) and Na(3)(NH(4))(3)[Ti(C(6)H(4.5)O(7))(2)(C(6)H(5)O(7))].9H(2)O (2). Complexes 1 and 2 were characterized by elemental analysis, FT-IR, (13)C-MAS solid state and solution NMR, cyclic voltammetry, and X-ray crystallography. 1 crystallizes in the triclinic space group P, with a = 15.511(9) A, b = 15.58(1) A, c = 9.848(5) A, alpha = 85.35(2) degrees, beta = 76.53(2) degrees, gamma = 61.97(2) degrees, V = 2042(2) A(3), and Z = 2. 2 crystallizes in the triclinic space group P, with a = 12.437(5) A, b = 12.440(5) A, c = 12.041(5) A, alpha = 83.08(2) degrees, beta = 81.43(2) degrees, gamma = 67.45(2) degrees, V = 1697(2) A(3), and Z = 2. The X-ray structures of 1 and 2 reveal the presence of a mononuclear complex, with Ti(IV) coordinated to three citrate ligands in a distorted octahedral geometry around Ti(IV). The citrates employ their central alkoxide and carboxylate groups to bind Ti(V), while the terminal carboxylates stay away from the Ti(IV)O(6) core. Worth noting in 1 and 2 is the similar mode of coordination but variable degree of protonation of the bound citrates, with the locus of (de)protonation being the noncoordinating terminal carboxylates. As a result, this work suggests the presence of a number of different Ti(IV)-citrate species of the same nuclearity and coordination geometry as a function of pH. This is consistent with the so far existing pool of mononuclear Ti(IV)-citrate species and provides a logical account of the aqueous speciation in the requisite binary system. Such information is vital in trying to delineate the interactions of soluble and bioavailable Ti(IV) forms promoting biological interactions in humans. To this end, chemical properties, structural attributes, and speciation links to potential ensuing biological effects are dwelled on.     

Preparation,characterization, and structure of zirconium fluoride alkylamino-N,N-bis methylphosphonates: a new design for layered zirconium diphosphonates with a poorly hindered interlayer region

This paper reports the preparation and characterization of the homologous series of layered zirconium fluoride n-alkylamino-N,N-bis methylphosphonates, of general formula ZrF(O(3)PCH(2))(2)NHC(n)H(2n+1) (n = 1, 2, 3, 4, 5, 6, 8, 9, 10), in which the two phosphonic groups of each diphosphonate building block participate in the assembly of a single lamella, because they are joined to zirconium atoms belonging to the same layer. The crystal structure of one of the series of these zirconium diphosphonates, ZrF(O(3)PCH(2))(2)NHC(5)H(11), has been solved "ab initio" by X-ray powder diffraction data. The structure is monoclinic, space group P2(1)/c. The zwitterionic character of the diphosphonate moiety is a distinctive feature which acts as a structure-orienting factor, generating a layer framework which is different from the other structures known for zirconium phosphates and phosphonates. This compound undergoes a phase transition at 117 degrees C which involves a rearrangement of the interlayer alkyl chains. The structure of the high-temperature phase has been refined by the Rietveld method. Because only one organic residue is associated with two phosphonate tetrahedra, a poorly hindered interlayer region is formed, and alkyl chains bonded to adjacent layers are interdigitated. Preliminary experiments have shown that these compounds are able to intercalate organic molecules, such as n-alkanols, from very dilute water solutions.     

Molecular, supramolecular and solution structures of peroxovanadium complexes with ON and O3N donor set ligands: two new types of cationic-anionic peroxovanadium(V) peroxovanadates(V)

The complexes, [VO(O(2))(pa)(2)]ClO(4).3H(2)O (1), [VO(O(2))(pa)(2)][VO(O(2))(2)(pa)].3H(2)O (2), [VO(O(2))(pa)(2)][VO(O(2))(ada)].2H(2)O (3) and [VO(O(2))(pa)(pca)].H(2)O (4)[pa = picolinamide, ada = carbamoylmethyliminodiacetate(2-) and pca = 2-pyrazinecarboxylate(1-)], were synthesized. 2 and 3 are new types of peroxovanadium complexes: monoperoxovanadium diperoxovanadate (2) and monoperoxovanadium monoperoxovanadate (3). The complexes were characterized by chemical analysis and IR spectroscopy, and 1, 3 and 4 also by X-ray analysis. The structure of 1 is disordered, with alternating positions of the oxo and peroxo ligands. The peroxo oxygen atoms, O(p), in 1 are involved in weak hydrogen bonds with water molecules and close intramolecular C-HO...(p) bonds [d(HO(p)) approximately 2.0 A]. The supramolecular structure of 1 is formed by a network of hydrogen bonds and strong attractive intermolecular pi-pi interactions between the pyridine rings. The supramolecular architecture in 4 is constructed by (N,O)-H...O hydrogen bonds between the neutral complex molecules and water of crystallization. The peroxo oxygen atoms in 4 form intramolecular C-H...O(p) bonds [d(H...O(p))= 2.303 A]. The pa and pca ligands are ON coordinated via the oxygen atoms of the C(NH(2))=O and COO(-) groups, respectively, and nitrogen atoms of the heterocyclic rings, and ada as a tetradentate O(3)N ligand. The thermal analysis of 4 showed that the loss of water of crystallization and the active oxygen release (T(min)/ degrees C 82, T(max)/degrees C 165) are, under given conditions, individual processes separated by the temperature interval 90-132 degrees C. The solution structures and stability were studied by UV-VIS and (51)V NMR spectroscopies.     

Influence of alkyl chain length on phosphate self-assembled monolayers

A series of alkyl phosphates with alkyl chain lengths ranging from C10 to C18 have been synthesized. Self-assembled monolayers (SAMs) of these molecules were prepared on titanium oxide surfaces by immersion of the substrates in alkyl phosphate solutions of 0.5 mM concentration in n-heptane/isopropanol. The SAMs were characterized by means of dynamic water contact angle (dCA) measurements, variable-angle spectroscopic ellipsometry (VASE), X-ray photoelectron spectroscopy (XPS), and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS). A higher degree of order and packing density within the monolayers was found for alkyl phosphates with alkyl chain lengths exceeding 15 carbon atoms. This is reflected in a lower dCA hysteresis, as well as a film thickness measured by VASE and XPS close to the expected values for SAMs with an average alkyl chain tilt angle of 30 degrees to the surface normal. Additionally a shift of the symmetric and antisymmetric C-H stretching modes in the PM-IRRAS spectra to lower wave numbers was observed. These findings imply a higher two-dimensional crystallinity of the films derived from alkyl phosphates with a longer alkyl chain length.     

Hydrothermal synthesis,structures, and magnetic properties of three novel 5-aminoisophthalic acid ligand bridged transition metal cation polymers

Three novel 5-aminoisophthalic acid (AIP) bridged polymers [Co(C(8)NH(5)O(4))(H(2)O)](n)() (1), [Ni(C(8)NH(5)O(4))(H(2)O)(2)](n)() (2), and [Zn(C(8)NH(5)O(4))(H(2)O)](n)() (3) were synthesized by hydrothermal reactions and characterized by IR, Raman, elemental analysis, ESR, and magnetic measurements. X-ray single-crystal analyses were carried out for [Co(C(8)NH(5)O(4))(H(2)O)](n)() (1), which crystallizes in the triclinic system, space group P1 macro, with a = 6.477(1) A, b = 7.130(1) A, c = 9.826(2) A, alpha = 108.9(1) degrees, beta = 93.97(3) degrees, gamma = 98.82(3) degrees, and Z = 2; for [Ni(C(8)NH(5)O(4))(H(2)O)(2)](n)() (2), in the triclinic system, space group P1 macro, a = 6.425(1) A, b = 8.115(2) A, c = 10.146(2) A, alpha = 113.09(3)(o), beta = 99.64(3)(o), gamma = 98.90(3)(o), and Z = 2; and for [Zn(C(8)NH(5)O(4))(H(2)O)](n)() (3), in the monoclinic system, space group P2(1)/n, a = 9.044(1) A, b = 8.264(1) A, c = 11.646(1) A, beta = 100.77(1) degrees, and Z = 4. The single X-ray diffraction studies reveal that 1 consists of an infinite honeycomb layer formed by four crystallographically independent motifs packed alternatively together; 2 consists of an infinite neutral railroad-like linear polymer, and 3 consists of infinite layers of alternating four-coordinated Zn(II) cations and AIP ligands. Finally, they are all packed into beautiful three-dimensional frameworks through complicated hydrogen bonding. Antiferromagnetic and ferromagnetic behaviors were observed for 1 and 2 from the magnetic measurements.     

Crystal Structure and Magnetic Behavior of [(C(2)H(5))(4)N](2)Cu(5)Cl(12). A Novel Two-Dimensional Copper(II) Halide Network Derived from the CuCl(2) Structure

A new chlorocuprate(II), [(C(2)H(5))(4)N](2)Cu(5)Cl(12), was prepared by reaction of CuCl(2).2H(2)O and (C(2)H(5))(4)NCl in 1,1,2-trichloroethane-ethanol followed by water-ethanol evaporation. The crystal structure, solved by single-crystal X-ray diffraction at room temperature, was found to be triclinic, space group P&onemacr;, with cell parameters a = 8.9123(9) ?, b = 11.0690(8) ?, c = 11.2211(9) ?, alpha = 118.766(6) degrees beta = 109.041(8) degrees, gamma = 97.465(7) degrees, and Z = 1, and consists of a two-dimensional network of [(Cu(5)Cl(12))(2)(-)](infinity) parallel to the a, b plane, alternating with layers of the organic cations along c. The anionic sheets are built up by aggregation of infinite zigzag chains of alternating tetranuclear and mononuclear subsequences. This structure can be related to the anhydrous CuCl(2) structure by systematic removal of (Cu(2)Cl(6))(2+) fragments. The magnetic susceptibility of this compound can be described by a simple model, suggested by the structural data, that considers independent contributions of linear tetramers, with antiferromagnetically coupled pairs of copper atoms (J(1)/k = -64(2) K), and almost magnetically isolated Cu(II) centers, that obey a Curie-Weiss law with a Θ = -2.7(8) K.     

2D-3D transformation of layered perovskites through metathesis: synthesis of new quadruple perovskites A2La2CuTi3O12 (A = Sr, Ca)

We describe the synthesis of two new quadruple perovskites, Sr(2)La(2)CuTi(3)O(12) (I) and Ca(2)La(2)CuTi(3)O(12) (II), by solid-state metathesis reaction between K(2)La(2)Ti(3)O(10) and A(2)CuO(2)Cl(2) (A = Sr, Ca). I is formed at 920 degrees C/12 h, and II, at 750 degrees C/24 h. Both the oxides crystallize in a tetragonal (P4/mmm) quadruple perovskite structure (a = 3.9098(2) and c = 15.794(1) A for I; a = 3.8729(5) and c = 15.689(2) A for II). We have determined the structures of I and II by Rietveld refinement of powder XRD data. The structure consists of perovskite-like octahedral CuO(4/2)O(2/2) sheets alternating with triple octahedral Ti(3)O(18/2) sheets along the c-direction. The refinement shows La/A disorder but no Cu/Ti disorder in the structure. The new cuprates show low magnetization (0.0065 micro(B) for I and 0.0033 micro(B) for II) suggesting that the Cu(II) spins are in an antiferromagnetically ordered state. Both I and II transform at high temperatures to 3D perovskites where La/Sr and Cu/Ti are disordered, suggesting that I and II are metastable phases having been formed in the low-temperature metathesis reaction. Interestingly, the reaction between K(2)La(2)Ti(3)O(10) and Ca(2)CuO(2)Cl(2) follows a different route at 650 degrees C, K(2)La(2)Ti(3)O(10) + Ca(2)CuO(2)Cl(2) --> CaLa(2)Ti(3)O(10) + CaCuO(2) + 2KCl, revealing multiple reaction pathways for metathesis reactions.     

Metamagnetism in cobalt phosphates with pillared layer structures: [Co3(pyz)(HPO4)2F2] and [Co3(4,4'-bpy)(HPO4)2F2].xH2O

Two new cobalt phosphates, [Co(3)(pyz)(HPO(4))(2)F(2)] (1) and [Co(3)(4,4'-bpy)(HPO(4))(2)F(2)].xH(2)O (x approximately 0.7) (2), have been synthesized by hydrothermal methods in the presence of aromatic amines, and characterized by single-crystal X-ray diffraction and magnetic susceptibility. Their structures consist of neutral sheets of fluorinated cobalt phosphate which are pillared through pyrazine and 4,4'-bipyridine molecules to form 3D frameworks. The structures are related to that of the mineral lazulite. Both compounds show long-range antiferromagnetic ordering below 15 K and metamagnetic behaviors. Compound 1 reveals a two-step magnetic phase transition. Crystal data for 1: monoclinic, space group C2/c (No. 15), a = 21.809(4) A, b = 7.370(1) A, c = 7.395(1) A, beta = 103.753(3) degrees, and Z = 4. Crystal data for 2 are the same as those for 1 except a = 29.940(2) A, b = 7.4421(5) A, c = 7.4170(5) A, and beta = 93.444(1) degrees.     

Macrocyclic copper(II) and zinc(II) complexes incorporating phosphate esters

Slow evaporation of solutions prepared by adding either Cu(ClO(4))(2).6H(2)O or Zn(ClO(4))(2).6H(2)O to solutions containing appropriate proportions of Me(3)tacn (1,4,7-trimethyl-1,4,7-triazacyclononane) and sodium phenyl phosphate (Na(2)PhOPO(3)) gave dark blue crystals of [Cu(3)(Me(3)tacn)(3)(PhOPO(3))(2)](ClO(4))(2).(1)/(2)H(2)O (1) and colorless crystals of [Zn(2)(Me(3)tacn)(2)(H(2)O)(4)(PhOPO(3))](ClO(4))(2).H(2)O (2), respectively. Blue crystals of [Cu(tacn)(2)](BNPP)(2) (3) formed in an aqueous solution of [Cu(tacn)Cl(2)], bis(p-nitrophenyl phosphate) (BNPP), and HEPES buffer (pH 7.4). Compound 1 crystallizes in the triclinic space group P1 (No. 2) with a = 9.8053(2) A, b = 12.9068(2) A, c = 22.1132(2) A, alpha = 98.636(1) degrees, beta = 99.546(1) degrees, gamma = 101.1733(8) degrees, and Z = 2 and exhibits trinuclear Cu(II) clusters in which square pyramidal metal centers are capped by two phosphate esters located above and below the plane of the metal centers. The trinuclear cluster is asymmetric having Cu...Cu distances of 4.14, 4.55, and 5.04 A. Compound 2 crystallizes in the monoclinic space group P2(1)/c (No. 14) with a = 13.6248(2) A, b = 11.6002(2) A, c = 25.9681(4) A, beta = 102.0072(9) degrees, and Z = 4 and contains a dinuclear Zn(II) complex formed by linking two units of [Zn(Me(3)tacn)(OH(2))(2)](2+) by a single phosphate ester. Compound 3 crystallizes in the monoclinic space group C2/c (No. 15) with a = 24.7105(5) A, b = 12.8627(3) A, c = 14.0079(3) A, beta = 106.600(1) degrees, and Z = 4 and consists of mononuclear [Cu(tacn)(2)](2+) cations whose charge is balanced by the BNPP(-) anions.     

Catalysis by hydrophobically modified poly(propylenimine) dendrimers having quaternary ammonium and tertiary amine functionality

Four different quaternary ammonium chloride-modified poly(propylenimine) (PPI) dendrimers were synthesized by alkylation of a PPI dendrimer having eight dimethylamino end groups with 1-bromooctane or 1-bromododecane. By varying the mole ratio of alkyl bromide to dendrimer, averages of 4-10 quaternary ammonium groups were formed. The new amphiphilic dendrimers are surface active and are micellar catalysts in water. The dendrimers have critical aggregation concentrations between 8.5 x 10(-4) and 9.0 x 10(-5) M. Decarboxylation of 6-nitrobenzisoxazole-3-carboxylate at 25 degrees C was 650 times faster than in water alone in the presence of a dendrimer quaternized with eight dodecyl chains at a concentration of 2.45 mM in quaternary ammonium groups. The order of the catalytic efficiency of the new dendrimers decreased with the length and number of hydrophobic alkyl groups in the order (C(12))(8) > (C(12))(4) > (C(8))(10) > (C(8))(5). The pseudo-first-order rate constants for basic hydrolysis of p-nitrophenyl hexanoate in pH 9.4 buffer at 30 degrees C using the (C(12))(8) and (C(12))(4) dendrimers were 26 and 13 times higher than those for hydrolysis with no dendrimer. The kinetic data were fit to a single-site binding model to evaluate the contributions of binding constants of reactants to the dendrimers and catalytic rate constants of the bound species to the overall catalytic activity.     

Three-dimensional open-framework cobalt(II) phosphates by novel routes

Two new three-dimensional open-framework cobalt phosphates, [C2N2H10]2[Co4(PO4)4]H2O, I, and [C4N3H16]3-[Co6(PO4)5(HPO4)3]H2O, II, have been prepared by the reaction of amine phosphates with Co2+ salts. I could also be prepared by the reaction of the cobalt tris amine complex with H3PO4. The crystal data for I and II are as follows: phosphate I, orthorhombic, space group P2(1)2(1)2(1) (no. 19), a = 10.277 (1) A, b = 10.302 (1) A, c = 18.836 (1) A, V = 1994.2 (2) A3, Z = 4; phosphate II, monoclinic, space group P2(1)/c (No. 14), a = 31.950 (1) A, b = 8.360 (1) A, c = 15.920 (1) A, beta = 96.6 (1) degrees V = 4223.4 (2) A3, Z = 4. The structures of both I and II are constructed from alternating CoO4 and PO4 tetrahedra. The connectivity leads to the formation of eight-membered channels in all the crystallographic directions resembling the aluminosilicate zeolite, merlinoite in the case of I and to a rather large, one-dimensional 16-membered channel in II. Strong hydrogen-bond interactions involving the amine and framework oxygen are present in both I and II.