Investigation on specific adsorption of hydrogen on lithium-doped mesoporous silica

This paper reports the synthesis, structure, and hydrogen adsorption property of Li-doped mesoporous silica (MPS) with a 2D hexagonal structure. The Li-doping is achieved by impregnation of the cylindrical mesopores with an ethanol solution of lithium chloride followed by heat treatment. Detailed characterization by solid-state NMR, TG-MS, and FT-IR suggests that, during the heat treatment, lithium chloride reacts with surface ethoxy groups (≡Si-OEt) to form ≡SiOLi groups, while ethyl chloride is released into the gas phase. The hydrogen uptake at 77 K and 1 atm increases from 0.68 wt% for the undoped MPS to 0.81 wt% for Li-doped MPS (Li-MPS). The isosteric heat of adsorption is 4.8 kJ mol⁻¹, which is consistent with the quantum chemistry calculation result (5.12 kJ mol⁻¹). The specific hydrogen adsorption on Li-MPS would be explained by the frontier orbital interaction between HOMO of hydrogen molecules and LUMO of ≡SiOLi. These findings provide an important insight into the development of hydrogen storage materials with specific adsorption sites.     

Phase composition and texture of Sr(La)Mn hexaaluminates

Hexaaluminates synthesized by precipitation and calcined at 700–1400°C have been characterized by atomic absorption spectroscopy, thermal analysis, X-ray powder diffraction, and adsorption methods. The heat treatment of the Mn-substituted and unsubstituted materials at 1100 and 1200°C yields a hexaaluminate phase. The specific surface area of the samples calcined at 1100°C is 20–49 m²/g. The texture of the samples calcined at 1000°C is characterized by a unimodal mesoporous pore size distribution with a mean pore diameter of 290 Å.     

Incorporation of heteropoly acid,tungstophosphoric acid within MCM-41 via impregnation and direct synthesis methods for the fabrication of composite membrane of DMFC

A heteropoly acid, tungstophosphoric acid (here-in-after TPA) with super acid strength was successfully encaged by two different methods, impregnation and direct synthesis. XRD and FT-IR analyses indicate that significant amount of TPA encaged by impregnation method should have been washed out upon washing treatment for TPA-MCM-41 powder. Due to significant loss of TPA upon washing, TPA was directly synthesized within MCM-41 pore channels using sodium tungstate dehydrate, disodium hydrogenphosphate dodecahydrate and hydrochloric acid. Compared to impregnation method, TPA was more effectively encaged and XRD analyses clearly show that reasonable amount of TPA in TPA-MCM-41 remains even after washing. A uniform distribution of directly synthesized TPA within MCM-41 pore channel was also confirmed by TEM images. In second part of this study, various TPA-encaged MCM-41 powders were used to fabricate composite membranes. For comparison, composite membranes fabricated with calcined MCM-41 and raw TPA, Nafion^® 115 and casting Nafion^® membrane were also prepared.     

Fluoride adsorption enhancement of Calcined-Kaolin/Hydroxyapatite composite

The use of waste or natural resources is an interesting approach to preparing adsorbent materials. Most adsorption materials are powder-based, making them impractical for a variety of applications. In this work, the natural kaolin clay and hydroxyapatite synthesized from biogenic waste were studied as defluoridation materials. The point of zero charge (pH_PZC), the fluoride adsorption capability and the adsorption isotherm of calcined kaolin and mixed calcined kaolin/hydroxyapatite in both powdered and moulded forms were investigated. The hardness of the moulded (post-formed) samples was tested before and after in immersion in a fluoride solution. The maximum hardness was 15.8 kilo-pounds for the post-formed calcined kaolin sample. Sample hardness values slightly decreased after immersion in a fluoride solution due to the formation of micro-cracks. Most samples presented high pH_PZC values, implying that these materials are suitable for the capture of fluoride anions. The adsorption properties varied with the ratio of calcined kaolin to hydroxyapatite. These properties for post-formed samples were different from those in powdered form. Post-formed samples showed higher fluoride adsorption. The maximum fluoride adsorption capacity and efficiency of the post-formed samples (calcined kaolin) at pH 3 were 1.74 F^? mg/g and 87%, respectively. The sorption of fluoride of hydroxyapatite and mixed calcined kaolin/hydroxyapatite powders was found to have the form of the Langmuir isotherm, which indicates a monolayer adsorption on the adsorbent surface. Isotherms of calcined kaolin powder, post-formed calcined kaolin and mixed calcined kaolin/hydroxyapatite samples followed the Freundlich isotherm, which indicates multilayer adsorption on a heterogenous adsorbent surface.     

The synthesis of mesoporous aluminosilicate using microcline for adsorption of mercury(II)

An economical mesoporous aluminosilicate was synthesized with microcline as starting material and the precursor 13X zeolite as seed for crystal structure on mesoporous walls. In this method, a mixture of microcline and Na2CO3 with a molar ratio of 1:1.05 was first calcined at 1093 K for 2.5 h. The calcined materials were mixed with 35 ml C16TMABr aqueous solution (containing 8.2 g C16TMABr) and the precursors of 13X zeolite, resulting in mesoporous aluminosilicate after crystallization of the solution at 378 K for 48 h and calcination of the powder at 823 K for 5 h. The as-synthesized sample has a uniform pore diameter distribution centered at 3.7 nm. The as-synthesized sample had BET surface area of 725 m2/g and BJH mean pore diameter of 3.7 nm. The FT-IR results revealed that the building units of 13X zeolite were inserted into the pore walls of the as-synthesized sample. The adsorption ratio of mercury(II) onto the as-synthesized adsorbent was about 95%. The adsorption process was found to be spontaneous and can be explained by particle diffusion and chemical ion-exchange mechanisms. The equilibrium concentration of mercury(II) using the as-synthesized sample as the adsorbent was under 1 microg/L, making the concentration of mercury meet the limit for drinking water in China as recommended by the World Health Organization.     

New inorganic (an)ion exchangers based on Mg-Al hydrous oxides: (alkoxide-free) sol-gel synthesis and characterisation

New inorganic ion exchangers based on double Mg-Al hydrous oxides were generated via the new non-traditional sol-gel synthesis method which avoids using metal alkoxides as raw materials. Surface chemical and adsorptive properties of the final products were controlled by several ways of hydrogels and xerogels treatments which produced the materials of the layered structure, mixed hydrous oxides or amorphous adsorbents. The final adsorptive materials obtained via thermal treatment of xerogels were the layered mesoporous materials with carbonate in the interlayer space, surface abundance with hydroxylic groups and maximum adsorptive capacity to arsenate. Higher affinity of Mg-Al hydrous oxides towards H(2)AsO(4)(-) is confirmed by steep adsorption isotherms having plateau (removal capacity) at 220 mg[As]g(dw)(-1) for the best sample at pH=7, fast adsorption kinetics and little pH effect. Adsorption of arsenite, fluoride, bromate, bromide, selenate, borate by Mg-Al hydrous oxides was few times high either competitive (depending on the anion) as compare with the conventional inorganic ion exchange adsorbents.     

Aerosol-assisted fabrication of mesoporous titania spheres with crystallized anatase structures and investigation of their photocatalitic properties

We demonstrate practical aerosol-assisted approach to synthesize spherical mesoporous titania particles with high surface areas. Scanning electron microscopy observation of the spray-dried products clearly shows spherical morphology. To remove surfactants and enhance crystallinity, the spray-dried products are calcined under various temperatures. The crystalline structures inside the particles are carefully detected by wide-angle XRD measurements. With increase of the calcination temperatures, anatase crystal growth proceeds and transformation from anatase to rutile is occurred. The effect of various calcination temperatures on the mesostructures is also studied by using N₂ adsorption desorption isotherms. The mesoporous titania particles calcined at 350, 400, and 500 °C exhibit type IV isotherms with a capillary condensation step and shows a hysteresis loop, which is a characteristic of mesoporous materials. The reduction in the surface areas and the pore volumes is confirmed by increasing the calcination temperatures, while the average pore diameters are increased gradually. This is attributed to the distortion of the mesostructures due to the grain growth of the anatase phase and the transformation to the rutile phase during the calcination process. As a preliminary experimental photocatalytic activity, oxidative decomposition of acetaldehyde under UV irradiation is examined. The mesoporous titania calcined at 400 °C shows the highest photocatalytic activity, due to both high surface area and well-developed anatase crystalline phase.     

Functionalized mesoporous materials for adsorption and release of different drug molecules: A comparative study

The adsorption capacity and release properties of mesoporous materials for drug molecules can be improved by functionalizing their surfaces with judiciously chosen organic groups. Functionalized ordered mesoporous materials containing various types of organic groups via a co-condensation synthetic method from 15% organosilane and by post-grafting organosilanes onto a pre-made mesoporous silica were synthesized. Comparative studies of their adsorption and release properties for various model drug molecules were then conducted. Functional groups including 3-aminopropyl, 3-mercaptopropyl, vinyl, and secondary amine groups were used to functionalize the mesoporous materials while rhodamine 6G and ibuprofen were utilized to investigate the materials’ relative adsorption and release properties. The self-assembly of the mesoporous materials was carried out in the presence of cetyltrimethylammonium bromide (CTAB) surfactant, which produced MCM-41 type materials with pore diameters of ∼2.7-3.3 nm and moderate to high surface areas up to ∼1000 m²/g. The different functional groups introduced into the materials dictated their adsorption capacity and release properties. While mercaptopropyl and vinyl functionalized samples showed high adsorption capacity for rhodamine 6G, amine functionalized samples exhibited higher adsorption capacity for ibuprofen. While the diffusional release of ibuprofen was fitted on the Fickian diffusion model, the release of rhodamine 6G followed Super Case-II transport model.     

Organo-modified mesoporous silica for sorption of carbon dioxide

Abstract  

Organo-modified mesoporous silica SBA-15 has been studied for sorption of carbon dioxide (CO₂). The SBA-15 sample was functionalized with a branched chain polymer, polyethylenimine (PEI), of different molecular weights (1,300 and 2,000 g mol⁻¹). Surface modification was carried out by impregnation of silica by PEI or by grafting with (3-chloropropyl)triethoxysilane, followed by substitution of chlorine atoms by PEI ligands. The prepared modified mesoporous materials were characterized by nitrogen adsorption/desorption at 77 K, high-resolution transmission electron microscopy, small-angle X-ray scattering, and thermal methods. Sorption of CO₂ was studied by gravimetric method at 303 K. The total amount of sorbed CO₂ varied between 0.19–0.67 mmol/g for respective samples. Regeneration of the materials after adsorption was achieved by thermal treatment at 343 K.     

Adsorption of Remazol Red 3BS from aqueous solutions using APTES- and cyclodextrin-modified HMS-type mesoporous silicas

The removal of Remazol Red 3BS (C.I. 239) dye by HMS ordered mesoporous silica, aminopropyl-modified HMS (HMS-NH₂) and β-cyclodextrin-modified HMS (HMS-CD) materials was studied in the present work. The modified materials were functionalized in situ by adding the organic modifiers (3-aminopropyltriethoxysilane and a silylated derivative of MCT-β-CD) in the synthesis mixture and using dodecylamine as the mesopore structure directing agent. The successful incorporation of aminopropyl groups in HMS-NH₂ and of cyclodextrin moieties in HMS-CD was verified by means of FT-IR spectroscopy, elemental analysis and N₂ porosimetry. The HMS-CD material exhibited significantly higher adsorption capacity compared to that of the HMS-NH₂ material, while the parent HMS mesoporous silica showed negligible adsorption capability. The maximum adsorption capacities obtained (at the optimum pH 2) on the basis of the Langmuir analysis were 0.28 mmol/g for HMS-CD and 0.14 mmol/g for HMS-NH₂. It was shown that the HMS-CD sorbent can be effectively regenerated by the surfactant-enhanced regeneration method using SDS and that can be reused without significant loss of its adsorption capabilities.     

海泡石制备HMS和AlSBA介孔分子筛的研究

通过酸浸和模板合成处理，海泡石直接合成有序介孔二氧化硅和含铝的介孔二氧化硅. 海泡石用盐酸处理后120 ℃下在NaOH溶液中处理72 h, 得到具有HMS结构特征的介孔分子筛；在含铝的碱性溶液中处理后得到具有AlSBA结构的介孔分子筛. 并用SAXRD、BET、TPD表征了介孔分子筛的物相结构、比表面积、孔径分布和表面酸性. 两种介孔分子筛的比表面积分别为508 m2•g^-1和946 m2•g^-1，孔径分别为3.4 nm和3.9 nm，且孔径分布窄. NH3-TPD结果表明分子筛表面都有两个酸中心，随着Al原子的引入，表面酸性增强.     

不同孔径的介孔碳分子筛对VB12的吸附性质研究

摘要利用SBA-15为模板, 在不同温度下合成了孔径大小在3.7(CMK-3-100)和6-3 nm(CMK-3-150)之间的介孔碳， 以其作为吸附剂, 研究了它们在水溶液中对VB12的吸附作用. 结果表明, CMK-3-130与CMK-3-100和CMK-3-150相比， 表现出对VB12最大的吸附能力(吸附能力为412.5 mg/g), 这是因为它有比较高的有序结构和比较大的孔容.     

Synthesis of nanosized titanium dioxide from tetrabutoxytitanium

Mesoporous TiO₂ has been obtained by template synthesis. The introduction of a surfactant in the hydrolysis of tetrabutoxytitanium in aqueous ethanol allows the structure of the resulting material to be controlled. The amorphous TiO₂ resulting from hydrolysis turns into anatase on being calcined at 300°C. As determined by X-ray diffraction, the anatase crystallite size is 70 nm in the presence of the highest surfactant concentration examined and 210 nm in the absence of a surfactant. Amorphous materials have been characterized by electron microscopy and differential thermal analysis. The ultimate benzene adsorption value has been determined for calcined mesoporous TiO₂.     

Synthesis and applications of mesoporous Cu-Zn-Al2O3 catalyst for dehydrogenation of 2-butanol

A series of mesoporous Cu-Zn-Al2O3 materials have been synthesized at ambient temperature and their structure was characterized by XRD, N2 physical adsorption and TPR techniques. Their catalytic applications for the dehydrogenation of 2-butanol to methyl ethyl ketone (MEK) were evaluated in a fixed-bed flow reactor at atmospheric pressure. It is demonstrated from the XRD patterns that both the as-synthesized samples and calcined samples have the typical XRD patterns of meso-structured materials and the results of N2O chemical adsorption showed that Cu was embedded in the framework of the mesoporous materials and homogeneously dispersed in the mesoporous Cu-Zn-Al2O3 materials. The catalytic activity of 2-hntanol dehydrogenation was varied in the order of CZA(10)相似文献   

One-pot synthesis of superacid catalytic material SO4/ZrO2-SiO2 with thermostable well-ordered mesoporous structure

A superacid mesostructured catalyst was directly synthesized by adding sulfuric acid to mesoporous zirconia-silica synthesis mixtures, and was characterized by HRTEM, XRD, UV-Vis, nitrogen sorption, NH₃-TPD, and Pyridine-FTIR. The XRD patterns and electron diffraction micrographs of the calcined samples showed the ordered mesoporous structure and tetragonal crystalline in frameworks. The ammonia TPD, pyridine in situ FTIR, and paraffin isomerization illustrated a new acidic property of the samples. The synthesis of the mesoporous materials, which have stable crystalline frameworks, high surface area, and strong acidity, is very likely to have important technological implications for catalytic reactions of large molecules.     

Thermodynamic and Kinetic Studies for the Adsorption of Fe(III) and Ni(II) Ions From Aqueous Solution Using Natural Bentonite

In this study, the adsorption behavior of natural bentonite with respect to Fe(III) and Ni(II) has been studied in order to consider its application to purity metal finishing wastewaters. During the adsorption process, batch technique is used, and the effects of pH, bentoite amount, temperature, heavy metal concentration, bentonite treatment (calcinations of natural bentonite at 700°C, washing by deionized water to remove the excess salt from bentonite surface), and agitation time on adsorption efficiency are studied. The washed and calcined bentonite samples were labeled by WB and CB, respectively. The pH-dependence of Fe(III) and Ni(II) sorption on the bentonite is significantly more noticeable, indicating a major contribution of surface complexation at the edge sites. It was determined that adsorption of Fe(III) and Ni(II) is well fitted by the second order reaction kinetic. Furthermore, the sorption rate of Fe(III) was higher than the sorption rate of Ni(II). Adsorption of Fe(III) and Ni(II) on NB appeared to follow Langmuir isotherm. In addition, calculated and experimental adsorbed amounts of Fe(III) by the unit NB mass are very higher than Ni(II). The paper also discusses the thermodynamic parameters of the adsorption (the Gibbs free energy, entropy, and enthalpy). Our results demonstrate that the adsorption process was spontaneous and endothermic under natural conditions. Also the adsorption capacity of bentonite for Fe(III) Ni(II) and increases with increased bentonite dose. According to the equilibrium studies, the selectivity sequence can be given as Fe(III) > Ni(II). The adsorbed amount of Fe(III) and Ni(II) on washed bentonite (WB) were very higher compared to NB and CB. Our results show that bentonite could especially WB be considered as a potential adsorbent for Fe(III) and Ni(II) removal from aqueous solutions.     

Effect of Synthesis Parameters on Sol–Gel Silica Modified by Zirconia

An experimental strategy was developed to obtain mesoporous SiO₂-ZrO₂ mixed oxides via a sol–gel process, which involved the use of tetraethylorthosilicate (TEOS) and an inorganic Zr-containing salt. The effects of key process parameters on the properties of the materials were investigated, including the choice of Zr(IV) source (zirconium oxychloride or nitrate), the ZrO₂ content and the synthesis pressure (i.e. ambient pressure or hydrothermal conditions). The resulting solids were dried, calcined at 500 °C, and characterized by nitrogen physisorption, pyridine chemisorption, ²⁹Si Nuclear Magnetic Resonance and X-ray diffraction. The data revealed that mesoporous materials with very narrow pore diameter distribution were obtained when using the autoclave procedure from both zirconium nitrate and oxychloride salts. The surface areas and pore size distributions were a function of ZrO₂ content. Differences in acidity, as determined by pyridine adsorption, were observed depending on the synthesis parameters.     

Study of adsorption properties of synthesized mesoporous silica doped with dysprosium and modified with nickel

Mesoporous silica (MPS) modified with nickel and MPS doped with dysprosium and modified with nickel have been synthesized by the template method. The adsorbents are characterized by various techniques such as transmission electron microscopy, scanning electron microscopy, X-ray diffraction, inductively coupled plasma spectroscopy, and X-ray fluorescence analyses. The adsorption properties of the synthesized samples have been investigated by inverse gas chromatography. Furthermore, thermodynamic characteristics of the adsorption of test compound belonging to different classes of organic compounds were obtained. In addition, the contributions of the energy of specific interactions to the total adsorption energy were calculated. It is also shown that entropy plays the determining role in the adsorption of test compounds on synthesized mesoporous materials.     

Temperature Dependence in the Synthesis of SBA-16-Type Mesoporous Silica with Pluronic F68 Block Copolymer

By adjusting the local effective surfactant packing parameter through synthesis temperature, highly ordered SBA-16-type mesoporous silica materials have been synthesized by templating with a nonionic triblock copolymer Pluronic F68 in strongly acidic conditions at temperature 30～40°C with the addition of K₂SO₄. The prepared SBA-16-type mesoporous silica materials having Im3m cubic mesostructure were proved by the well-defined x-ray diffraction patterns combined with transmission electron microscopy. Scanning electron microscopy indicated that a transformation from faced-sphere to faced-polyhedron shape morphologies could be induced with increasing of the synthesis temperature. The nitrogen adsorption–desorption analysis revealed that the mean pore size (5.50～6.13 nm) of the prepared materials increased with increasing synthesis temperature. However, when the synthesis temperature exceeded 46°C, only disordered mesoporous silca was obtained. Our synthesis strategies by adjusting the local effective surfactant packing parameter through synthesis condition, even in a narrow range, would be used not only to optimize the synthesis conditions of reported mesoporous silca, but also to fabricate new mesoporous silica materials with well-ordered channel and anticipated morphologies.