Kinetics and mechanism of decomposition of peroxide compounds in the liquid phase of the KOH-H<Subscript>2</Subscript>O<Subscript>2</Subscript>-H<Subscript>2</Subscript>O system in vessels made of various materials

Decomposition kinetics of peroxide compounds in the liquid phase of the system KOH-H₂O₂-H₂O at an initial hydrogen peroxide concentration of about 14.5 M and pH 12.7 in vessels made of Pyrex glass, polyethylene terephthalate, and 12Kh18N10T steel was studied in the temperature range from ?10 to +50°C. The main kinetic parameters of the processes under study were determined. The influence exerted by the material of the reaction vessel on the kinetics and mechanism of decomposition of peroxide compounds in the liquid phase of the system under study were determined.     

Sorption of phosphate and arsenate ions from solutions by sorbents of the system TiO<Subscript>2</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-H<Subscript>2</Subscript>O

Hydrated nanosize oxides of the system TiO₂-Fe₂O₃-Al₂O₃-H₂O were tested as sorbents for recovery of phosphate and arsenate ions from aqueous solutions in a wide range of pH values. The optimal compositions of the sorbents were found, their ion-exchange functions were studied, and limiting sorption capacities were determined.     

Physicochemical simulation of calcite (dolomite)-FeSO<Subscript>4</Subscript>-H<Subscript>2</Subscript>O open systems

Effect of the chemical composition of carbonate minerals on the precipitation of iron from a Fe(II) sulfate solution was studied.     

Hydrothermal synthesis of nanosized and amorphous alumina in the ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system

The reciprocal influence of components on the chemical and structural transformations in the ZrO₂-Al₂O₃-H₂O system during nanoparticle formation under hydrothermal conditions is considered. The possibility of formation of amorphous aluminum oxide under hydrothermal conditions is found as a result of the influence of zirconia nanoparticles on the crystallization.     

Bleaching of kraft cellulose by the ClO<Subscript>2</Subscript>-H<Subscript>2</Subscript>O<Subscript>2</Subscript> scheme

The influence of conditions of a two-stage treatment of deciduous and coniferous kraft cellulose (by the ClO₂-H₂O₂ scheme) on the degree of its delignification and bleaching was studied. The optimum ratio of reagents in each stage of the treatment was elucidated.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 10, 2004, pp. 1735–1738.Original Russian Text Copyright © 2004 by Shcherbakova, Demin.     

Kinetics of the oxidation of diethyl sulfide in the B(OH)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O system

Data obtained for the kinetics of oxidation of diethyl sulfide (Et₂S) by hydrogen peroxide in aqueous solution catalyzed by boric acid indicate that monoperoxoborates B(O₂H)(OH) ₃ ⁻ and diperoxoborates B(O₂H)₂(OH) ₂ ⁻ are the active species. The rates of the reactions of Et₂S with B(O₂H)(OH) ₃ ⁻ and B(O₂H)₂(OH) ₂ ⁻ are 2.5 and 100 times greater than with H₂O₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 38–42, January–February, 2007.     

Phases in the system Tb<Subscript>2</Subscript>O<Subscript>3</Subscript>-SeO<Subscript>2</Subscript>-H<Subscript>2</Subscript>O at 100°C and their physicochemical study

Summary The solubility isotherm of the system Tb₂O₃-SeO₂-H₂O at 100° was studied. The compounds of the three-component system were identified by the Schreinemakers’ method as well as by chemical and X-ray phase analyses. Simultaneous TG and DTA analyses of all compounds of the system were made. The mechanism of thermal decomposition was described.     

Solid solutions in the MgO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Coexisting solid solutions with spinel and corundum structure were synthesized at 1773 K and two pressures, 1 bar and 25 kbar. Samples were analyzed by electron microprobe analysis and X-ray powder diffraction. Pressure and temperature were shown to affect the properties of the solid solutions in different ways. Pressure governs the composition of the defect spinel Mg_1−xAl₂O₄, and temperature changes the cation distribution between coexisting phases. This allows one to separate the effects of cation exchange and magnetic contribution to the heat capacity in thermodynamic modeling. The defect spinel itself can form only because γ-Al₂O₃ exists, polymorph with spinel structure.     

Interactions in the system Mn(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-HCONH<Subscript>2</Subscript>-H<Subscript>2</Subscript>O

Solubilities and solid phases in the system Mn(NO₃)₂-HCONH₂-H₂O were studied by an isothermal method at 25°C. The congruently saturating compound Mn(NO₃)₂ · 2HCONH₂ · 2H₂O was isolated; the concentration conditions for its crystallization in the system were determined. The solid phases of the system were characterized by physicochemical methods (X-ray powder diffraction, differential thermal analysis, IR spectroscopy, and crystal-optical analysis).     

Synthesis processes and transport properties of solid solutions in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript> system

The results of studies of solid solutions with the overall composition of Bi₄V_{2 ? x} Ge _x O_{11 ? δ} and Bi₄Ge_{3 ? x} V _x O_{12 + δ} are presented. The process of phase formation are studied during the synthesis of solid solution using the ceramic method and through liquid precursors. Crystallochemical parameters of the obtained compounds are determined. The size distribution of the particles is studied. Conductivity of annealed of polycrystalline samples as a function of temperature and composition is studied using the impedance spectroscopy method. The shape of impedance complex plane plots of the samples obtained in different ways is studied and analyzed.     

Mechanism of the nanocrystals formation of the spinel structure in the MgO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system under the hydrothermal conditions

Using the method of hydrothermal synthesis,the nanoparticles of magnesium-aluminum spinel were obtained with a crystallite size of 40–50 nm. The sequence was determined of the chemical transformations under hydrothermal conditions of the initial magnesium-aluminum hydroxides obtained by co-precipitation, leading to the formation of nanoparticles MgAl₂O₄.     

Thermochemical properties of MnNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

Homogeneous manganocolumbite (MnNb₂O₆) was synthesized from Nb₂O₅ and MnO oxides. Powder sample was orthorhombic with unit cell parameters: α = 0.5766 nm, b = 1.4439 nm, c = 0.5085 nm and V = 0.4234 nm³. Heat capacity over the temperature range of 313–1253 K was measured in an inert atmosphere with combined thermogravimetry and calorimetry using NETZSCH STA 449C Jupiter thermoanalyzer. Melting point was 1767 ± 3 K, enthalpy of melting was 144 ± 4 kJ mol⁻¹. Experimental heat capacity of MnNb₂O₆ is fitted to polynomial C _pm = 221.46 + 3.03 · 10⁻³ T + −39.79 · 10⁵ T ⁻² + 40.59 · 10⁻⁶ T ².     

Glass formation in the CaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> and SrO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

A physicochemical study of glasses based on the MO-Bi₂O₃-B₂O₃ and SrO-Bi₂O₃-B₂O₃ systems was performed. Glass formation regions were found. The structural and optical properties, as well as the thermal behavior of the glasses, were studied.     

Solubility isotherm for the Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>-H<Subscript>2</Subscript>O system

Solubility in the Na₂MoO₄-Na₂SO₄-H₂O system was studied using isothermal saturation at 5–100°C. The boundaries of crystallization fields were determined for sodium sulfate and sodium molybdate. Solid solutions were not observed within the range of the temperatures studied. The density, refractive index, and dynamic viscosity of the saturated solutions of the system were determined, and these data were used to calculate the molar volume, kinematic viscosity, and apparent molar volume of the sum of salts in these solutions. All property isotherms of solutions are in a strict correlation with the solubility in the system; this correlation is represented as an isobaric-isothermal diagram.     

The synthesis and properties of solid solutions based on Ba<Subscript>4</Subscript>Ca<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>11</Subscript>

(Ba_{1 ? x} Ca _x )₆Nb₂O₁₁ solid solutions were synthesized. The compositions were shown to be single-phase at 0.23 ≤ x ≤ 0.47 and have a double perovskite cubic structure with an incomplete oxygen sublattice. The interaction of solid solutions with water vapor and their electrical properties were studied. In dry atmosphere, these complex oxides were mixed oxygen-hole conductors. In humid atmosphere, they intercalated water and exhibited protonic conductivity. The influence of Ba/Ca isovalent substitution, the dynamics of the oxygen sublattice, and the concentration of intercalated water on the value and contribution of protonic and hole conductivity was analyzed.     

Specific features of the thermodynamics of activation in the LaNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> and CeNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> systems

Using heat conducting Tian—Calvet calorimetry and volumetric measurements, the first hydrogen absorption—desorption cycles in the LaNi₅-H₂ and CeNi₅-H₂ systems were studied. The pressure—composition isotherms were plotted, the equilibrium pressures of hydrogen along the absorption and desorption branches and in the region of hysteresis for different activation steps were determined, and the enthalpies of phase transitions α → β and β → α were calculated. The profiles of the heat evolution curves were analyzed. It was concluded that the mechanism of the reactions studied changes upon activation.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 134–139, January, 2005.     

Physicochemical study of composite gel in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> system

We show a feasibility of preparing a highly homogeneous composite gel (CG) based on hydrolysis products of Al₂O₃-ZrO₂ salts. The phase composition of a sample calcined at 1250°C for 2 h is as follows: α-Al₂O₃, t-ZrO₂, and m-ZrO₂ where the t-ZrO₂/m-ZrO₂ phase ratio ranges from 2.8 to 3.8 depending on gel preparation conditions. The investigative tools used are powder X-ray diffraction, differential thermal analysis (atmosphere: Ar), and IR spectroscopy.     

Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Physicochemical properties and mixed electronic and ionic conduction of composite ceramics in the system ZrO<Subscript>2</Subscript>-Bi<Subscript>2</Subscript>CuO<Subscript>4</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

Composites ZrO₂-(Bi₂CuO₄+ 20 wt % Bi₂O₃) (50–80 vol % ZrO₂) are synthesized and their physicochemical properties are studied. It is demonstrated that the composites comprise triple-phase mixtures of ZrO₂ of a monoclinic modification, Bi₂CuO₄, and solid solution Bi_2?x Zr _x O_{3 + x/2} and retain their mechanical strength up to 800°C. Impedance spectroscopy is used to examine their electroconductivity at 700–800°C in the interval of partial oxygen pressures extending from 37 to 2.1 × 10⁴ Pa. Contributions made by electronic and ionic constituents to their overall conductivity are evaluated. The best specimens’ conductivity is ～0.01 S cm^?1, with the electronic and ionic transport numbers nearly equal. The composite consisting of 50 vol % ZrO₂ and 50 vol % (Bi₂CuO₄ + 20 wt % Bi₂CuO₄) is tested in the role of an oxygen-separating membrane. The selective flux of oxygen in the temperature interval 750–800°C amounts to (2.2–6.3) × 10^?8 mol cm^?2 s^?1, testifying that these materials may be used as gas-separating membranes.     

Changes in the heat capacity of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> solid solutions near the point of antiferromagnetic phase transition in Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>

Al₂O₃-Cr₂O₃ solid solutions with 0, 4, 7, 10 and 20 mol% of corundum were synthesized using a high-pressure/high-temperature apparatus and characterized by X-ray powder diffraction. Calorimetric measurements were carried out using DSC-111 (Setaram). Heat capacity was measured by the enthalpy method in a temperature range of 260–340 K, near magnetic phase transition in pure Cr₂O₃ (305 K). Magnetic contribution into the heat capacity was derived and found to change irregularly with the composition.