A 1,2,3,4,5-pentaphenylferrocene-stoppered rotaxane capable of electrochemical anion recognition

The chloride anion templated synthesis of an electrochemical anion sensory interlocked host system, prepared by the integration of redox-active 1,2,3,4,5-pentaphenylferrocene stopper groups into the structure of a rotaxane capable of binding anionic guests is described. Extensive (1)H NMR and electrochemical titration investigations were used to probe the anion recognition and sensing properties of the rotaxane, compared to the axle and model system components. A characteristic electrochemical response was observed for chloride binding by the rotaxane, which was attributed to the topologically constrained cavity of the interlocked host molecule.     

Clipping and stoppering anion templated synthesis of a [2]rotaxane host system

A new [2]rotaxane host system containing nitro-isophthalamide macrocycle and polyether functionalised pyridinium axle components is prepared via clipping and stoppering synthetic methodologies using chloride anion templation. After removing the chloride anion template, (1)H NMR titration experiments reveal the unique interlocked host cavity to be highly selective for binding chloride and bromide in preference to basic oxoanions in competitive aqueous solvent mixtures. The rotaxane host system proved to be a superior anion complexant in comparison to the individual macrocycle and axle components. The anion binding affinity of the novel rotaxane is also investigated via molecular dynamics simulations and in general the structural data obtained corroborates the experimental solution anion recognition behaviour.     

Anion‐Induced Shuttling of a Naphthalimide Triazolium Rotaxane

The anion‐templated synthesis of a rotaxane structure, incorporating the new naphthalimide triazolium motif, is described and the interlocked host shown to exhibit selective, uni‐directional, anion‐induced shuttling. Initial pseudorotaxane investigations demonstrate the ability of a naphthalimide triazolium threading component to form interpenetrated assemblies with counter‐anion‐dependent co‐conformations. ¹H NMR studies reveal that the shuttling behaviour of the analogous rotaxane host system is controlled by selective anion binding and by the nature of the solvent conditions. Complete macrocycle translocation only occurs upon the recognition of the smaller halide anions (chloride and bromide). The rotaxane solid‐state crystal structure in the presence of chloride is in agreement with the solution‐phase co‐conformation. The sensitivity of the axle naphthalimide absorbance band to the position of the macrocycle component within the interlocked structure enabled the molecular motion to be observed by UV/Vis spectroscopy, and the chloride‐induced shuttling of the rotaxane was reversed upon silver hexafluorophosphate addition.     

Rotaxanes capable of recognising chloride in aqueous media

A new, versatile chloride-anion-templating synthetic pathway is exploited for the preparation of a series of eight new [2]rotaxane host molecules, including the first sulfonamide interlocked system. (1)H NMR spectroscopic titration investigations demonstrate the rotaxanes' capability to selectively recognise the chloride anion in competitive aqueous solvent media. The interlocked host's halide binding affinity can be further enhanced and tuned through the attachment of electron-withdrawing substituents and by increasing its positive charge. A dicationic rotaxane selectively binds chloride in 35% water, wherein no evidence of oxoanion binding is observed. NMR spectroscopy, X-ray structural analysis and computational molecular dynamics simulations are used to account for rotaxane formation yields, anion binding strengths and selectivity trends.     

A ferrocene functionalized rotaxane host system capable of the electrochemical recognition of chloride

A ferrocene appended rotaxane is prepared by chloride anion templation and ring closing metathesis. Upon removal of the chloride template, the rotaxane is demonstrated to be selective for chloride over more basic oxoanions by (1)H NMR spectroscopy and electrochemistry, in marked contrast to an acyclic analogue--the first example of a solution based redox-active interlocked host system capable of the electrochemical recognition of anions.     

Anion templated assembly of mechanically interlocked structures

This tutorial review describes the evolution of the field of chemical templation, in particular, emphasising the impact its application has made to the synthesis of mechanically interlocked structures. Recent advances in the use of negatively charged template species for the synthesis of interlocked structures are detailed, with the main focus of this review describing the development of a general anion templation strategy that combines anion recognition with ion-pairing. The versatility of this methodology is demonstrated by the chloride anion templated synthesis of a series of interpenetrated pseudorotaxane, rotaxane and catenane structures. Upon template removal, the mechanically interlocked rotaxanes and catenanes are shown to bind anions within their topologically unique anion binding clefts by virtue of electrostatic and hydrogen bonding interactions, exhibiting a strong selectivity for the chloride halide anion template. The incorporation of the photo-active rhenium(I) bipyridyl signalling group into the rotaxane structural framework highlights the potential of these interlocked systems in future chemical sensor design.     

Investigating the effect of macrocycle size in anion templated imidazolium-based interpenetrated and interlocked assemblies

The effect of varying the size of the macrocycle component on the formation of anion templated imidazolium interpenetrated assemblies is investigated. Two different approaches to reducing the macrocycle size are undertaken and the stabilities of the resulting pseudorotaxanes incorporating substituted imidazolium threading components studied using (1)H NMR spectroscopy. Novel imidazolium axle containing interlocked rotaxane host structures are synthesised using chloride anion templated amide condensation and 'stoppering' methods, and the anion recognition properties of the 'stoppered' rotaxane investigated.     

Calix[4]arene‐Based Rotaxane Host Systems for Anion Recognition

The synthesis, structure and anion binding properties of the first calix[4]arene‐based [2]rotaxane anion host systems are described. Rotaxanes 9? Cl and 12? Cl, consisting of a calix[4]arene functionalised macrocycle wheel and different pyridinium axle components, are prepared via adaption of an anion templated synthetic strategy to investigate the effect of preorganisation of the interlocked host’s binding cavity on anion binding. Rotaxane 12? Cl contains a conformationally flexible pyridinium axle, whereas rotaxane 9? Cl incorporates a more preorganised pyridinium axle component. The X‐ray crystal structure of 9? Cl and solution phase ¹H NMR spectroscopy demonstrate the successful interlocking of the calix[4]arene macrocycle and pyridinium axle components in the rotaxane structures. Following removal of the chloride anion template, anion binding studies on the resulting rotaxanes 9? PF₆ and 12? PF₆ reveal the importance of preorganisation of the host binding cavity on anion binding. The more preorganised rotaxane 9? PF₆ is the superior anion host system. The interlocked host cavity is selective for chloride in 1:1 CDCl₃/CD₃OD and remains selective for chloride and bromide in 10 % aqueous media over the more basic oxoanions. Rotaxane 12? PF₆ with a relatively conformationally flexible binding cavity is a less effective and discriminating anion host system although the rotaxane still binds halide anions in preference to oxoanions.     

Anion-induced shuttling of a naphthalimide triazolium rotaxane

The anion-templated synthesis of a rotaxane structure, incorporating the new naphthalimide triazolium motif, is described and the interlocked host shown to exhibit selective, uni-directional, anion-induced shuttling. Initial pseudorotaxane investigations demonstrate the ability of a naphthalimide triazolium threading component to form interpenetrated assemblies with counter-anion-dependent co-conformations. (1)H NMR studies reveal that the shuttling behaviour of the analogous rotaxane host system is controlled by selective anion binding and by the nature of the solvent conditions. Complete macrocycle translocation only occurs upon the recognition of the smaller halide anions (chloride and bromide). The rotaxane solid-state crystal structure in the presence of chloride is in agreement with the solution-phase co-conformation. The sensitivity of the axle naphthalimide absorbance band to the position of the macrocycle component within the interlocked structure enabled the molecular motion to be observed by UV/Vis spectroscopy, and the chloride-induced shuttling of the rotaxane was reversed upon silver hexafluorophosphate addition.     

Hydroxy Groups Enhance [2]Rotaxane Anion Binding Selectivity

We report the synthesis of two [2]rotaxanes containing an interlocked three dimensional binding cavity formed from a pyridinium bis(amide) axle component containing two phenol donors, and an isophthalamide based macrocycle. In the competitive solvent mixture 1 : 1 CDCl₃ : CD₃OD, one of the receptors exhibits a much higher selectivity preference for chloride than an analogous rotaxane without the hydroxy groups. X-ray crystal structures reveal the chloride anion guest encapsulated within the interlocked binding cavity, though not all of the hydrogen bond donors are utilised. Computational semi-empirical simulations indicate that secondary intermolecular interactions occur between the axle hydroxy hydrogen bond donors and the [2]rotaxane macrocycle components, contributing to a more preorganised binding pocket, which may be responsible for the observed enhanced selectivity.     

Anion-templated assembly of interpenetrated and interlocked structures

The rational development of a general anion templation strategy for the construction of a variety of interpenetrated and interlocked molecular structures based upon the coupling of anion recognition with ion-pairing is described. The success of this anion templation methodology is demonstrated with the halide anion directed assembly of a series of novel [2]pseudorotaxanes containing pyridinium, pyridinium nicotinamide, imidazolium, benzimidazolium and guanidinium threading components and anion binding macrocyclic ligands. Interlocked [2]rotaxane and [2]catenane molecular structures are also synthesised using this anion templation protocol. These interlocked structures feature unique topologically defined hydrogen bond donating binding domains that exhibit a high degree of selectivity for chloride, the templating anion. A series of rhenium(I) bipyridyl containing [2]pseudorotaxane assemblies and a [2]rotaxane further highlight the potential this strategic anion templation approach has in future chemical sensor design and fabrication.     

Iodide‐Induced Shuttling of a Halogen‐ and Hydrogen‐Bonding Two‐Station Rotaxane

The first example of utilizing halogen‐bonding anion recognition to facilitate molecular motion in an interlocked structure is described. A halogen‐bonding and hydrogen‐bonding bistable rotaxane is prepared and demonstrated to undergo shuttling of the macrocycle component from the hydrogen‐bonding station to the halogen‐bonding station upon iodide recognition. In contrast, chloride‐anion binding reinforces the macrocycle to reside at the hydrogen‐bonding station.     

Shielded alkyl-functionalised rotaxane host cavities for improved anion recognition

The synthesis and anion recognition properties of four novel [2]rotaxane host architectures containing additional alkyl functionality integrated within macrocyclic and axle components to shield the binding cavity from the solvent are described. The rotaxane species containing a tetra(methyl)-functionalised macrocycle component is found to be a weaker anion complexant than the equivalent unfunctionalised receptor, which is likely due to steric hindrance restricting the anion's access to the interlocked cavity. Rotaxane molecules containing tetra(methyl)-functionalised axle components are also investigated, and the additional alkyl functionality serves to enhance anion binding affinity and selectivity when incorporated within the axle's flexible ethylene linkages. Moreover, the equivalent unfunctionalised rotaxane displays a rare preference for oxoanions over chloride guest species.     

Active‐Metal Template Synthesis of a Halogen‐Bonding Rotaxane for Anion Recognition

The synthesis of an all‐halogen‐bonding rotaxane for anion recognition is achieved by using active‐metal templation. A flexible bis‐iodotriazole‐containing macrocycle is exploited for the metal‐directed rotaxane synthesis. Endotopic binding of a Cu^I template facilitates an active‐metal CuAAC iodotriazole axle formation reaction that captures the interlocked rotaxane product. Following copper‐template removal, exotopic coordination of a more sterically demanding rhenium(I) complex induces an inversion in the conformation of the macrocycle component, directing the iodotriazole halogen‐bond donors into the rotaxane’s interlocked binding cavity to facilitate anion recognition.     

Iodide Discrimination by Tetra-Iodotriazole Halogen Bonding Interlocked Hosts

Whilst the exploitation of interlocked host frameworks for anion recognition is widely established, examples incorporating halogen bond donor groups are still relatively rare. Through the integration of a novel tetra(iodotriazole)-pyridinium motif into macrocycle and axle components, a family of halogen bonding catenane and rotaxanes are constructed for anion recognition studies in a competitive aqueous-organic solvent mixture. Importantly, the degree of anion selectivity displayed is dictated by the topological nature and charged state of the respective interlocked host cavity. All the interlocked hosts exhibit iodide anion selectivity over other halides and sulfate, with the level of discrimination being the greatest with the mono-cationic rotaxane. Arising from greater electrostatic interactions working in tandem with halogen bonding and hydrogen bonding, the di-cationic rotaxane displays stronger anion association at the expense of a relatively lower degree of iodide selectivity.     

Nitrite‐Templated Synthesis of Lanthanide‐Containing [2]Rotaxanes for Anion Sensing

The first anion‐templated synthesis of a lanthanide‐containing interlocked molecule is demonstrated by utilizing a nitrite anion to template initial pseudorotaxane formation. Subsequent stoppering of the interpenetrated assembly allows for the preparation of a lanthanide‐functionalized [2]rotaxane in high yield. Following removal of the nitrite anion template, the europium [2]rotaxane host is demonstrated to recognize and sense fluoride selectively.     

Anion Sensing by Solution‐ and Surface‐Assembled Osmium(II) Bipyridyl Rotaxanes

We report the preparation of [2]rotaxanes containing an electrochemically and optically active osmium(II) bipyridyl macrocyclic component mechanically bonded with cationic pyridinium axles. Such interlocked host systems are demonstrated to recognise and sense anionic guest species as shown by ¹H NMR, luminescence and electrochemical studies. The rotaxanes can be surface assembled on to gold electrodes through anion templation under click copper(I)‐catalysed Huisgen cycloaddition conditions to form rotaxane molecular films, which, after template removal, respond electrochemically and selectively to chloride.     

Halotriazolium Axle Functionalised [2]Rotaxanes for Anion Recognition: Investigating the Effects of Halogen‐Bond Donor and Preorganisation

The anion‐templated synthesis of three novel halogen‐bonding 5‐halo‐1,2,3‐triazolium axle containing [2]rotaxanes is described, and the effects of altering the nature of the halogen‐bond donor atom together with the degree of inter‐component preorganisation on the anion‐recognition properties of the interlocked host investigated. The ability of the bromotriazolium motif to direct the halide‐anion‐templated assembly of interpenetrated [2]pseudorotaxanes was studied initially; bromide was found to be the most effective template. As a consequence, bromide anion templation was used to synthesise the first bromotriazolium axle containing [2]rotaxane, the anion‐binding properties of which, determined by ¹H NMR spectroscopic titration experiments, revealed enhanced bromide and iodide recognition relative to a hydrogen‐bonding protic triazolium rotaxane analogue. Two halogen‐bonding [2]rotaxanes with bromo‐ and iodotriazolium motifs integrated into shortened axles designed to increase inter‐component preorganisation were also synthesised. Anion ¹H NMR spectroscopic titration experiments demonstrated that these rotaxanes were able to bind halide anions even more strongly, with the iodotriazolium axle integrated rotaxane capable of recognising halides in aqueous solvent media. Importantly, these observations suggest that a halogen‐bonding interlocked host binding domain, in combination with increased inter‐component preorganisation, are requisite design features for a potent anion receptor.     

Luminescent Anion Sensing by Transition-Metal Dipyridylbenzene Complexes Incorporated into Acyclic,Macrocyclic and Interlocked Hosts

A series of novel acyclic, macrocyclic and mechanically interlocked luminescent anion sensors have been prepared by incorporation of the isophthalamide motif into dipyridylbenzene to obtain cyclometallated complexes of platinum(II) and ruthenium(II). Both the acyclic and macrocyclic derivatives 7⋅Pt , 7⋅Ru⋅PF₆ , 10⋅Pt and 10⋅Ru⋅PF₆ are effective sensors for a range of halides and oxoanions. The near-infra red emitting ruthenium congeners exhibited an increased binding strength compared to platinum due to the cationic charge and thus additional electrostatic interactions. Intramolecular hydrogen-bonding between the dipyridylbenzene ligand and the amide carbonyls increases the preorganisation of both acyclic and macrocyclic metal derivatives resulting in no discernible macrocyclic effect. Interlocked analogues were also prepared, and preliminary luminescent chloride anion spectrometric titrations with 12⋅Ru⋅(PF₆)₂ demonstrate a marked increase in halide binding affinity due to the complementary chloride binding pocket of the [2]rotaxane. ¹H NMR binding titrations indicate the interlocked dicationic receptor is capable of chloride recognition even in competitive 30 % aqueous mixtures.     

Porphyrin-functionalised rotaxanes for anion recognition

The synthesis and anion-recognition properties of two new porphyrin-functionalised [2]rotaxane host molecules are described. The rotaxane compounds are prepared via a chloride-anion-templated clipping strategy. (1)H NMR titration experiments demonstrate that the rotaxane host systems exhibit high binding affinities and general selectivities for chloride anions in DMSO-d(6) or CDCl(3)/CD(3)OD solvent systems. UV-visible and fluorescence spectroscopy experiments reveal that the rotaxane receptors are ineffective as optical anion sensors. However, both receptors are shown to be capable of detecting chloride anions electrochemically via cathodic shifts in the porphyrin P/P(+) redox couples.