加速溶剂萃取快速洗脱印迹聚合物中的模板分子

通过优化实验条件,选择洗脱温度80℃、加热时间5min、萃取压力10.4MPa、洗脱溶剂为300mL的甲醇/乙酸(90∶10,V/V),静态萃取时间8min、吹扫时间100s,对1.000g尼古丁印迹聚合物中的模板分子进行连续6次的萃取洗脱,洗脱效率达94.2%,模板渗漏量仅为9.8μg/L,萃取时间<70min。将2000mg洗脱后的印迹聚合物颗粒装填于3mL的聚丙烯固相萃取小柱中,用10mL甲醇/乙酸(90∶1,V/V)淋洗小柱,用高效液相色谱检测淋洗液中的尼古丁,获得模板的渗漏量为9.8μg/L。     

Molecularly Imprinted Polymers with Mandelic Acid as Template

In this report, molecularly imprinted polymers (MIPs) with racemic and L-mandelic acid as the templates were synthesized. Several structural analogues were chosen to study the selectivity of the MIPs prepared using 4-vinylpyridine (4-VP) as the monomer (MIP_4-VP). At the same time, the chromatographic behaviors of the MIP using acrylamide (AA) as the monomer (MIP_AA) in two different mobile phases, acetonitrile and hexane/ethyl acetate (1:1, v/v), were investigated and the separation of the enantiomers was tried. The results indicated that MIP_4-VP had great retention with a template comparable to other analogues. However, no difference in the k′ values of the enantiomers was observed, as the interaction between the polymer and the enantiomers was mainly dependent on the acidity, which showed no difference. The MIP_AA showed a more obvious imprinting effect for the template in hexane/ethyl acetate (1:1, v/v) than in acetonitrile. But the separation of the enantiomers was not achieved even in the less polar solvent, though there was an obvious difference between the retention time of L-MA and D-MA on the L-MA imprinted polymer.     

Dummy Fragment Template Molecularly Imprinted Polymers for the Selective Solid-phase Extraction of Gonyautoxins from Seawater

A multitemplate molecularly imprinted polymer was synthesized using fragments similar to gonyautoxins 1 and 4 including 2,4,6-triaminopyrimidine, 4-hydroxy-2-butanone, and imidazole as dummy templates by bulk polymerization. Scanning electron microscopy and infrared spectroscopy showed a porous structure and the formation of organic groups in the imprinting process of the polymer. One millilitre of 0.1?mol?L^?1 acetic acid and 1?mL of 95% methanol were the optimized washing and eluting solutions during the molecularly imprinted solid-phase extraction. The adsorption capacity of the multitemplate molecularly imprinted polymer was lower than for the monotemplate molecularly imprinted polymer prepared in a previous study in seawater in which Alexandrium tamarense and Alexandrium minutum were cultivated. This result may due to the inappropriate combination of the dummy template fragments in the synthesis resulting in the unfitness of the imprinting sites for gonyautoxins 1 and 4. In general, it is inappropriate to use fragments with the similar parts to the analyte as the dummy templates. However, this work indicated the optimal molecularly imprinted polymer for the selective extraction of gonyautoxins 1 and 4.     

Molecularly Imprinted Polymers for Solid Phase Extraction

The combination of molecularly imprinted polymers (MIPs) and solid phase extraction (SPE) is reviewed. MIPs, which have high selectivity and affinity for a predetermined molecule (template), have been used as sorbents for SPE to selectively isolate analytes from biological, pharmaceutical, and environmental samples. Solid phase extraction with molecularly imprinted polymers (MIP–SPE) is a promising technique which allows specific analytes to be selectively extracted from complex matrices. This survey summarizes the characteristics, development and application of MIP–SPE in recent years. Existed problems and the future direction of MIP–SPE are also discussed.     

有机磷神经毒剂分子印迹聚合物的模拟模板分子

采用DFT/B3LYP-D3(BJ)/6-31G(d,p)计算模拟方法分析探讨了双(对硝基苯基)磷酸酯(BNPP)替代对氧磷(PO)用作有机磷神经毒剂分子印迹聚合物(MIPs)模板分子模拟物的可行性. 通过对比BNPP和PO两种模板分子分别与各种功能单体形成的复合物的构型稳定性和结合能大小, 确认了以4-甲基丙烯酰胺基安替比林(MAAP)为第一功能单体、 甲基丙烯酸(MAA)为第二功能单体组成的双功能单体体系是最佳功能单体体系. 以BNPP为模板分子、 MAAP-MAA为单体体系、 乙二醇二甲基丙烯酸酯(EGDMA)为交联剂、 纳米二氧化硅为载体, 采用表面印迹技术制备了SiO₂@BNPP分子印迹聚合物, 并对聚合物的表面形貌和吸附性能进行了分析. 实验结果表明, 当n(BNPP)/n(MAAP)/n(MAA)/n(EGDMA)为1∶1∶4∶20时, MIPs的吸附容量最大可达19.03 mg/g, 对4-硝基苯酚(4-NP)的分离因子为17.50; MIPs能够快速吸附模板分子, 5 min即可达到吸附平衡量的92%, 动态吸附平衡时间仅为15 min, 重复使用5次后仍能保持良好的吸附能力; 吸附过程符合准二级动力学模型和Langmuir等温吸附模型, Scatchard方程分析表明MIPs中存在两类吸附作用位点. 实验结果与计算模拟结果的一致性表明, 计算模拟对有机磷神经毒剂MIPs的设计和研究具有一定的指导意义.     

Selective Solid-phase Extraction of Aloe Emodin from Aloe by Molecularly Imprinted Polymers

The extraction and separation of aloe emodin were optimized via selective molecularly imprinted solid-phase extraction. Molecularly imprinted polymer was prepared from the functional monomer, methacrylic acid and a mixture of ethanol/dodecanol(90/10, volume ratio) as porogen. It overcomes the common problems of imprin-ting biological polar compounds and shows high selectivity compared favorably with those of non-imprinted polymer and commercially available C₁₈ and silica cartridges in similar aloe emodin tests. Good linearity was obtained between 0.002 and 2.5 mg/mL(r²=0.998) with relative standard deviations below 3.3%.     

Synthesis of Molecularly Imprinted Polymers for Nevirapine by Dummy Template Imprinting Approach

Nevirapine (NVP) and its structurally related analogs including nicotinamide (NAM), benzamide (BZM) and benzophenone (BZP) were used as templates in the synthesis of molecularly imprinted polymers for NVP. Molecular modeling was used to estimate binding energy of the complex formation between methacrylic acid (MAA) monomer and the selected templates, while equilibrium binding studies were applied to evaluate the polymer binding efficiency. The data indicated that NAM is the best candidate to prepare MIPs for retaining NVP due to a relatively similar binding energy between the NVP–MAA and NAM–MAA complex. The NAM-imprinted polymer showed a high binding affinity and selectivity toward NVP. When the polymer was applied as a sorbent in solid-phase extraction of NVP from human plasma, high recovery and reproducibility were obtained.     

Synthesis of Molecularly Imprinted Polymers for Nevirapine by Dummy Template Imprinting Approach

Nevirapine (NVP) and its structurally related analogs including nicotinamide (NAM), benzamide (BZM) and benzophenone (BZP) were used as templates in the synthesis of molecularly imprinted polymers for NVP. Molecular modeling was used to estimate binding energy of the complex formation between methacrylic acid (MAA) monomer and the selected templates, while equilibrium binding studies were applied to evaluate the polymer binding efficiency. The data indicated that NAM is the best candidate to prepare MIPs for retaining NVP due to a relatively similar binding energy between the NVP–MAA and NAM–MAA complex. The NAM-imprinted polymer showed a high binding affinity and selectivity toward NVP. When the polymer was applied as a sorbent in solid-phase extraction of NVP from human plasma, high recovery and reproducibility were obtained.

     

羟丙哌嗪分子印迹的固相萃取

以L-羟丙哌嗪为模板分子, α-甲基丙烯酸为功能单体, 三羟甲基丙烷三甲基丙烯酸酯为交联剂, 合成了羟丙哌嗪分子印迹聚合物, 利用该聚合物进行羟丙哌嗪固相萃取应用研究. 实验证明, 所合成的分子印迹聚合物具有良好的识别萃取模板分子羟丙哌嗪的能力, 能够用于羟丙哌嗪的富集浓缩, 而空白聚合物却不具备这样的特性. 考察了模板分子与其结构类似物苄基哌嗪、N-异丙基哌嗪和乙氧基羰基哌嗪的固相萃取分离情况, 研究表明, 虽然其中的苄基哌嗪在印迹材料上具有最强的保留, 但是通过先后使用不同的洗脱溶液实现了模板分子与苄基哌嗪的选择性分离.探讨了印迹识别机理,并用PM3 半经验计算机模拟方法进行了辅助分析验证.     

乙酰水杨酸分子印迹聚合物的合成及性能研究

采用分子印迹技术,以乙酰水杨酸为模板分子,1,4-二乙烯基苯为交联剂,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,合成了对乙酰水杨酸具有特异性吸附能力的两种分子印迹聚合物;它们对乙酰水杨酸都存在两类不同亲和性的结合位点,其中用丙烯酰胺合成的分子印迹聚合物对模板分子乙酰水杨酸的氢键作用力和结合能力都比用α-甲基丙烯酸合成的聚合物强。这对分子印迹技术用于环境、血液等复杂样品中乙酰水杨酸的分离和富集具有重要意义。     

除草剂青莠定分子印迹聚合物的合成及结合性能研究

采用分子印迹技术,分别以α-甲基丙烯酸和4-乙烯基吡啶为功能单体,合成了两种对除草剂青莠定具有选择性结合能力的分子印迹聚合物．紫外光度法研究显示了模板分子青莠定和4-乙烯基吡啶的离子作用强于它和α-甲基丙烯酸之间的氢键作用,并用平衡结合实验研究了不同功能单体的聚合物对模板分子的结合能力和对底物的选择性,结果表明以4-乙烯基吡啶为功能单体合成的分子印迹聚合物对青莠定表现出更高的结合能力和更优的选择性．这对分子印迹技术用于环境样品中除草剂青莠定的分离和富集具有重要意义。     

微波辅助合成分子印迹聚合物用于萃取蜂蜜中的氯霉素

采用微波辅助法快速制备以氯霉素为模板分子的分子印迹聚合物.将合成的聚合物作为吸附剂,选择性分离和富集蜂蜜样品中的氯霉素,并结合高效液相色谱-串联质谱法对萃取物进行分析.对合成的分子印迹聚合物进行了表征,考察了聚合物的吸附性能及其选择性,并进行了Scatchard分析.结果表明,合成的聚合物为球形,对氯霉素具有良好的识别能力,最大表观结合量可达0.428 mmol/g.该方法的线性范围为0.5~100 ng/g,相关系数0.999,蜂蜜中氯霉素的检出限为0.13 ng/g,6种蜂蜜样品中氯霉素的加标回收率范围为88%~93%.     

扑热息痛分子印迹聚合物应用于固相萃取的研究

以扑热息痛为印迹分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂合成了棒状的印迹聚合物;把其装于自制的固相萃取柱中,研究了以乙腈和水为溶剂时扑热息痛在柱上的保留行为;通过优化清洗、洗脱条件,使扑热息痛和与其具有相似结构的非那西丁、对叔丁基苯酚在柱上得到了很好的分离;同时也测定了治疗感冒的药物海王银得菲中扑热息痛的含量,其回收率可达94．3％．     

咖啡因分子印迹固相萃取柱的制备及应用

以咖啡因作为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,制备了咖啡因分子印迹聚合物(MIP)。与非印迹聚合物(NIP)相比,MIP对咖啡因具有更高的吸附容量和选择性,MIP和NIP对咖啡因的最大静态吸附量分别为28.1和16.5mg/g,相对选择因子为1.25。以咖啡因分子印迹聚合物为固相萃取填料,结合高效液相色谱(HPLC),建立了茶水中咖啡因浓度及人饮茶后血清中咖啡因浓度的检测方法。考察了洗脱剂种类和用量对咖啡因回收率的影响。当萃取柱依次以2mL水活化,水溶液上样,2mL水淋洗,6mL甲醇-乙酸(9∶1,V/V)洗脱,咖啡因在MIP固相萃取柱上的回收率达到97.5%,而在NIP柱上的回收率仅为54.9%。     

利多卡因分子印迹聚合物的制备及其在固相萃取中的应用

以利多卡因(LD)分子印迹聚合物为研究体系,利用分子模拟计算功能单体与模板分子之间的相互作用能,并通过作用实验加以验证,确定衣康酸为最佳单体。以乙二醇二甲基丙烯酸酯为交联剂,N,N-二甲基甲酰胺(DMF)为溶剂,采用本体聚合法合成分子印迹聚合物(MIP);采用高效液相色谱检测。实验发现,聚合物具有较高的印迹指数和选择性;在乙腈加载、5%甲醇-乙腈淋洗、5%HCl-甲醇洗脱条件下,聚合物具有最佳印迹效果。通过渗漏实验考察聚合物键合容量。实验发现,在乙腈溶液中每100mg MIP与空白聚合物(NIP)可分别键合1.62和0.92mg LD分子;采用光度法测定牛血清中利多卡因的含量,其平均回收率达到84.6%。     

Selective Preconcentration of Mezlocillin from Eggs by Molecularly Imprinted Polymers on Silica

Surface molecularly imprinted polymers for mezlocillin were used for the selective solid-phase extraction of mezlocillin from eggs. The molecularly imprinted polymers were prepared using mezlocillin as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linker, silica particle as the support and were characterized by infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The adsorption properties of polymers were investigated in detail. The obtained polymers provided high imprinting efficiency to mezlocillin with an imprinting factor of 3.72 and were used as selective sorbents for mezlocillin. Molecularly imprinted solid-phase extraction followed by high-performance liquid chromatography was used for the determination of mezlocillin in eggs and the conditions were evaluated. The average recovery of mezlocillin in fortified eggs was between 69.8 and 82.3% with a relative standard deviation less than 6.9%. The results demonstrate the application of molecularly imprinted polymers for the extraction of mezlocillin from biological samples.     

应用分子印迹-固相萃取法提取中药活性成分非瑟酮

分别以中药黄栌的主要成分非瑟酮为印迹分子、 丙烯酰胺为功能单体及乙二醇二甲基丙烯酸酯为交联剂, 通过封管聚合法合成了分子印迹聚合物; 将其装于自制的固相萃取柱中, 研究了以不同体积比的乙醇-水溶液为溶剂时非瑟酮在柱上的保留行为; 通过优化清洗及洗脱条件, 使非瑟酮与它的结构相似物槲皮素在柱上得到了很好的分离.     

Molecularly Imprinted Polymers: Compromise between Flexibility and Rigidity for Improving Capture of Template Analogues

New synthetic strategies for molecularly imprinted polymers (MIPs) were developed to mimic the flexibility and mobility exhibited by receptor/enzyme binding pockets. The MIPs were prepared by bulk polymerization with quercetin as template molecule, acrylamide as functional monomer, ethylene glycol dimethacrylate as cross‐linker, and THF as porogen. The innovative grafting of specific oligoethylene glycol units onto the imprinted cavities allowed MIPs to be obtained that exhibit extended selectivity towards template analogues. This synthetic strategy gives promising perspectives for the design of molecular recognition of molecules based on a congruent pharmacophore, which should be of interest for drug development.     

Efficient Separation of Hydrophobic Molecules by Molecularly Imprinted Cyclodextrin Polymers

Cyclodextrins were cross-linked with toluene 2,4-diisocyanate in dimethyl sufoxide in the presence of hydrophobic biomolecules as templates, and the imprinted polymers were applied to the stationary phases of high performance liquid chromatography. Molecular imprinting efficiently promoted the binding-affinity and substrate-selectivity towards the template molecule, compared with the control polymers prepared in their absence. When cholesterol (template molecule) was complexed with cyclodextrins prior to the polymerization, for example, the imprinted polymer retained cholesterol more strongly than other steroids. Upon the polymerization without a template molecule, the binding towards steroids was much weaker. Besides steroids, imprinting was effective for various hydrophobic and rigid template molecules. Since binding of the guest molecule was based on inclusion complex formation with cyclodextrins, separation could be achieved in the solvents containing water. These polymeric receptors are also applicable to selective recognition of biologically important molecules or removal of toxic molecules from aqueous media. Thus, imprinting of cyclodextrins is useful for the preparation of synthetic tailor-made receptors for various kinds of hydrophobic guest molecules.