Syntheses of two diamine substituted 1,3-distal calix[4]arene-based magnetite nanoparticles for extraction of dichromate, arsenate and uranyl ions

The synthesis of two new calixarene derivatives 4 and 5, functionalized at the lower rim with 4-amino-1-benzylpiperidine to give diamide and diamine derivatives of p-tert-butylcalix[4]arene, is described. They were obtained by the reaction of both the diester derivative of p-tert-butylcalix[4]arene (2) and the dialkyl bromide derivative of p-tert-butylcalix[4]arene (3) with 4-amino-1-benzylpiperidine. The ¹H NMR spectra of calixarene derivatives show that 4 and 5 exist in the cone conformation. Moreover, these diamide and diamine derivatives of p-tert-butylcalix[4]arene (4 and 5) have been immobilized onto [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane-modified Fe₃O₄ magnetite nanoparticles to obtain calixarene-based magnetic nanoparticles M-DADBP-Calix (6) and M-DABP-Calix (7). The calix[4]arene immobilized materials were characterized by a combination of Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and Thermogravimetric Analyses (TGA) and elemental analysis. Additionally, the studies regarding the removal of As(V)/Cr(VI) ions as well as U(VI) ion from aqueous solutions were also carried out by using these compounds in liquid-liquid/solid-liquid extraction experiments.     

Synthesis, 1H-NMR conformational analysis and complexation studies of two di-imidazolyl acetamido p-tert-butylcalix[4]arenes

The synthesis of a new di-imidazolyl-di-methoxy acetamido p-tert-butylcalix[4]arene 4 is reported. 4 has been prepared by reacting the corresponding di-methyl ester di-methoxy derivative with histamine in 1:1 mixture of methanol: toluene. The binding properties of 4 towards alkali, alkaline earth, transition (Zn²⁺, Co²⁺) and heavy (Pb²⁺, Cd²⁺) metals have been investigated along with the complexes stoichiometries. The ¹H-NMR spectra of complexes show the location of cations in receptor 4. Partial cone conformation is observed only with strontium and calcium whereas the cone conformation is detected with most of the cations. Comparison of the complexation results with those obtained for di-imidazolyl acetamido p-tert-butylcalix[4]arene 3 missing the methyl groups is also reported.     

2,2′-Dipyridyl and 1,10-phenanthroline in the synergetic extraction of Eu3+

The thermodynamics of the extraction of Eu³⁺ by thenoyltrifluoroacetone (HTTA) and by mixtures of HTTA and bidentate amine bases such as 2,2-dipyridyl (Dipy) and 1,10-phenanthroline (Phen) in benzene from an aqueous phase fixed to 0.1M ionic strength (NaClO₄), pH 3.9, has been investigated. Phenanthroline forms both the Eu(TTA)₃·Phen and Eu(TTA)₃·2Phen species, which are much stronger than the dipyridyl complexes. The diluent effect on the extraction is also studied.     

Extraction behaviors of Eu,Th, U and Am with diamides+thenoyltrifluoroacetone

N,N-dimethyl-N,N-dihexyl-3-oxapentanediamide, DMDHOPDA, N,N-dihexyl-3-thiopentanediamide, DHTPDA and N,N-dihexyl-3-oxapentanediamide, DHOPDA were synthesized and tested for the synergistic extraction of Eu³⁺, Th⁴⁺, UO ₂ ²⁺ , NpO ₂ ⁺ and Am³⁺ with thenoyltrifluoroacetone (HTTA). Although Eu³⁺, Th⁴⁺, UO ₂ ²⁺ and Am³⁺ were not extracted by DHTPDA or DHOPDA alone, they were extracted synergistically when combined with HTTA. Analysis of the dependency of extraction on pH and extractant concentration indicated that the dominant extracted species were Eu(TTA)₃(A), Th(TTA)₃(A)(X), UO₂(TTA)₂(A) and Am(TTA)₃(A) (where A is diamide, and X is chloroacetate or ClO ₄ ^– ).     

Interaction effect between thenoyltrifluoroacetone and tri-n-octylphoshine oxide in the synergistic extraction of trivalent lanthanides. Determination of the composition of the extracted species+ of the extracted species

The distribution constant K_D(HTTA) of thenoyltrifluoroacetone between 10^–3M HNO₃ and cyclohexane was determined by means of spectrophotometric measurements of HTTA concentration in the aqueous phase. The distribution ratio, D, of HTTA, when tri-n-octylphosphine (TOPO) is present, and the equilibrium constant, _n , of the reaction between HTTA and TOPO in the organic phase were also determined. By means of the known K_D(HTTA) and D values, the equilibrium constant of the HTTA-TOPO interaction was calculated. Making use of K_D(HTTA) and _n values and of the slope analysis method, the composition of the extracted lanthanide complexes was established. By considering the interaction reaction between the extractants, the species Ln(TTA)₃ · TOPO and Ln(TTA)₃ · 2(TOPO), for Ln=La and Yb, were identified in the organic phase. The equilibrium constants of the reactions that give rise to the species were also calculated.From a thesis submitted by D. I. T. FÁVARO to the University of São Paulo in partial fulfillment for a Doctor of Sciences Degree in Nuclear Technology.     

Synthesis and dichromate anion extraction ability of p-tert-butylcalix[4]arene diamide derivatives with different binding sites

The article describes the synthesis and evaluation of the dichromate anion (Cr₂O₇²⁻/HCr₂O₇⁻) extraction properties of p-tert-butylcalix[4]arene diamide derivatives (5-7) containing different binding sites. Among these compounds, 6 and 7 have been synthesized via aminolysis in a toluene-methanol solvent system with 3-aminomethylpyridine and 3,6-dioxa-1,8-diamino octane, respectively. On the other hand, compound 5 has been synthesized via an acid chloride method due to its inefficiency under aminolysis. The extraction properties of these diamides toward dichromate anions are studied by liquid-liquid extraction. The results show that p-tert-butylcalix[4]arene diamide derivative 7 exhibited a much higher affinity toward dichromate anions than that of 6 due to its special structure, while 5 was an ineffective ligand for these anions.     

Synthesis of two new p-tert-butylcalix[4]arene β-ketoimin derivatives for extraction of dichromate anion

In this study the selective derivatization of p-tert-butylcalix[4]arene was carried out and two new p-tert-butylcalix[4]arene β-ketoimin, 5,11,17,23-tetra-tert-butyl-25,27-bis-3-methyl-[(β-ketoimine)-ethoxy]-26,28-dihydroxycalix[4]arene (4), and 5,11,17,23-tetra-tert-butyl-25,27-bis-3-chloro-[(β-ketoimine)-ethoxy]-26,28-dihydroxycalix[4]arene (5) have been synthesized. In the synthesis, the lower rim of p-tert-butylcalix[4]arene was modified in order to acquire binding site for the recognition of dichromate anion. It was observed that these ionophores 4 and 5 showed high affinity towards dichromate anion. The protonated Schiff-base forms of the receptors were effective for transferring the HCr₂O₇ ^? anion from aqueous phase to a dichloromethane phase.     

Lower rim substituted p-tert-butyl calix[4]arene; Part 14. Synthesis, structures and binding studies of calix[4]arene thioamides

A number of p-tert-butylcalix[4]arene thioamides were synthesized and characterized by ¹H-NMR and elemental analysis. Compounds 1–5 are O-substituted derivatives with –CH₂–C(=S)–N–X groups, where NX = morpholidyl, NEt₂, NHC₂H₄Ph, NHCH₂Ph and NHEt, respectively. The X-ray structures of the ligands 1, 3, 5 and of the complex 3·Pb(ClO₄)₂, (compound 6), are presented and their slightly distorted cone conformation is established. The influence of the nature of the thioamide functions (secondary or tertiary) on the extractability of some selected metal cations was investigated. Whereas all these calixarenes show the highest extraction level for Ag⁺, tertiary thioamides are more efficient extractants for Pb²⁺ than secondary thioamides.     

Asymmetric calix[4]-thiacalix[4]arene tubes: Synthesis and ionophore properties

Asymmetric p-tert-butylcalix[4]-p-R-thiacalix[4]arene tubes (R = tert-Bu, H, 1-adamantyl) were prepared for the first time by reaction of tosyloxyethoxy derivative of p-tert-butylcalix-[4]arene and the corresponding p-R-thiacalix[4]arenas in acetonitrile in the presence of K₂CO₃. Complex formation of compounds obtained with sodium, potassium, and rubidium iodides in CDCl₃-CD₃OD, 4:1, was studied by means of ¹H NMR. The ionophore properties of the molecule were governed by the character of substituents on the upper rim of the thiacalixarene fragment, and only the molecular tube containing a fragment of the p-(1-adamantyl)-thiacalix[4]arene quantitatively bound potassium ions (quickly) and rubidium ions (slowly).     

Synthesis of a novel calix[4]azacrown ionophore and its extraction ability toward Cr(VI)

The present study describes the synthesis of a novel extractant p-tert-butyl-calix[4]azacrown ionophore (5) and evaluation of its extraction capability toward dichromate ion from aqueous solution. At first, p-tert-butyl-calix[4]azacrown ionophore (5) has been synthesized from the condensation of p-tert-butyl-calix[4]arene diamine (3) with N-(4-formylphenyl)-aza-15-crown-5 (4). The studies regarding the removal of dichromate ion from the aqueous solutions have been carried out in the liquid–liquid extraction systems. The extraction results showed that p-tert-butyl-calix[4]azacrown derivative (5) exhibited generally higher affinity towards dichromate ion than both 3 and 4 at all studied pHs.     

Polythiophene-coated Fe3O4 nanoparticles as a selective adsorbent for magnetic solid-phase extraction of silver(I), gold(III), copper(II) and palladium(II)

We have developed a fast method for sensitive extraction and determination of the metal ions silver(I), gold(III), copper(II) and palladium(II). Fe₃O₄ magnetic nanoparticles were modified with polythiophene and used for extraction the metal ions without a chelating agent. Following extraction, the ions were determined by flow injection inductively coupled plasma optical emission spectrometry. The influence of sample pH, type and volume of eluent, amount of adsorbent, sample volume and time of adsorption and desorption were optimized. Under the optimum conditions, the calibration plots are linear in the 0.75 to 100 μg L^?1 concentration range (R²?>?0.998), limits of detection in the range from 0.2 to 2.0 μg L^?1, and enhancement factors in the range from 70 to 129. Precisions, expressed as relative standard deviations, are lower than 4.2 %. The applicability of the method was demonstrated by the successful analysis of tap water, mineral water, and river water.

Extraction of Cesium-137 and Americium-241 by Calix[n]arenes from Carbonate-Alkaline Media

Trends of cesium-137 and americium-241 extraction from carbonate–alkaline media with p-tert-butylcalix[n]arenes with macrocycles of different size (n = 4, 6, 8), including monofunctional derivatives with lipophilic substituents for increasing their solubility in organic media, were studied. It was demonstrated that O-n-octyl ethers of p-tert-butylcalix[6]arene appeared to be the most efficient extractants for Cs(I) cations, while it was p-tert-butylthiacalix[4]arene for and americium(III) cations.     

Crystal structure and triboluminescence of the [Eu(TTA)2(NO3)(TPPO)2] complex

The crystal structure of [Eu(TTA)₂(NO₃)(TPPO)₂] (I) (TTA = thenoyltrifluoroacetone, TPPO = triphenylphosphine oxide) possessing intense triboluminescence was established by X-ray crystallography. The crystals are triclinic, noncentrocymmetrical: a = 11.047(3) Å, b = 11.794(3) Å, c = 12.537(3) Å; α = 102.635 (4)°, β = 102.088(4)°,γ = 117.765(3)°; space group P1, Z = 1. The central Eu(III) atom coordinates two oxygen atoms of two TPPO molecules at distances of 2.271 Å and 2.282 Å, two oxygen atoms of the nitrate group at distances of 2.478 Å and 2.481 Å, four oxygen atoms of two TTA ions at distances of 2.365 Å, 2.381 Å, and 2.363 Å, 2.371 Å (coordination number is 8). The coordination polyhedron of the Eu(III) atom is a distorted dodecahedron. Possible reasons for spectral differences in the Stark structure of photo-and triboluminescence of I are discussed.     

Thermal analysis of charge-transfer complex formed by nitrogen dioxide and substituted calix[4]arene

Simultaneous thermal analysis with evolved gas analysis (STA-EGA) was used to study the ability of 1,3-alternate conformer of tert-butylcalix[4]arene with four n-propoxy substituents (1) to be applied for detection of nitrogen dioxide in reversible sensors. Solid calixarene 1 forms an intensively colored charge-transfer complex (CTC) with gaseous NO₂/N₂O₄. Using the STA-EGA method, the nature and conditions of CTC bleaching were characterized, including the conditions of its reversible change of color from white to dark blue and back at CTC formation and decomposition. For this, the thermal stability of CTC and its regeneration products were studied. This, together with the ion thermograms for evolved gases, gives the information on the oxidation of 1 by nitrogen dioxide if present.     

Liquid-liquid extraction of thorium/IV/ with LIX-54 and its mixtures

Solvent extraction of thorium/IV/ by a commercially available chelating extractant LIX-54 /a -diketone derivative/ /HA/ and its mixtures with tri-n-butyl phosphate /TBP/, thenoyltrifluoroacetone /HTTA/ and tri-n-octyl phosphineoxide /TOPO/ in benzene as the diluent have been studied. Quantitative extraction of thorium/IV/ by the mixture of 10% LIX-54 and 0.1M TOPO was noticed at pH 2.8. Influence of various concentrations of HTTA and TOPO in their mixtures with LIX-54 on the extraction of the same metal ion has been investigated and pronounced synergism was observed. Slope analyses determination shows the extracted species to be possibly of the type [Th/TTA/₂/A/₂] in case of extraction by mixtures of HTTA and LIX-54. Slopes of the linear plots were computed employing regression analysis, and variance in results has been shown.     

Carbon-based magnetic nanocomposites in solid phase dispersion for the preconcentration some of lanthanides, followed by their quantitation via ICP-OES

We report on a method for the extraction of the lanthanide ions La(III), Sm(III), Nd(III) and Pr(III) using a carbon-ferrite magnetic nanocomposite as a new adsorbent, and their determination via flow injection ICP-OES. The lanthanide ions were converted into their complexes with 4-(2-pyridylazo)resorcinol, and these were adsorbed onto the nanocomposite. Fractional factorial design and central composite design were applied to optimize the extraction efficiencies to result in preconcentration factors in the range of 141–246. Linear calibration plots were obtained, the limits of detection (at S/N?=?3) are between 0.5 and 10 μg?L^?1, and the intra-day precisions (n?=?3) range from 3.1 to 12.8 %. The method was successfully applied to a certified reference material.

Thermodynamics of solvent extraction of thorium by solutions of HHTA and mixtures of HHTA and TBP

The changes in free energy, enthalpy and entropy for the extraction of thorium by solutions of thenoyltrifluoroacetone (HTTA) and mixtures of solutions of HTTA and tri-n-butylphosphate (TBP), in three diluents, viz. cyclohexane, benzene and chloroform, were determined using the solvent extraction data obtained at different temperatures. From these data the thermodynamic parameters associated with the formation of Th(TTA)₄ · TBP in the respective organic diluents were evaluated. Trends in the enthalpy changes were attributed to different degrees of association of the diluents with themselves and with the solutes present in them.     

Alkali Metal Complexation. Binding Properties of cone and partial-cone Calix[4]arenes Bearing a Mixed (O 2 , O 2 ') Donor Set (O = Phosphine Oxide; O ' = Amide or Ester)

The stability constants of alkali metal complexes obtained from the followingO-substituted calix[4]arenes were determined by UV/Vis spectroscopy inmethanol at 20°C: 5,11,17,23-tetra-tert-butyl-25,27-bis(diethylcarbamoylmethoxy)-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(cone-1), 25,27-syn-26,28-anti-5,11,17,23-tetra-tert-butyl-25,27-bis(diethylcarbamoylmethoxy)-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene (paco-1),5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(cone-2) and25,27-syn-26,28-anti-5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(paco-2). All ligands form 1:1 complexes with alkali metal cations. The amide-containing calixarenes were found to be more efficient for alkali metalcomplexation than those bearing ester substituents. While sodium ions are selectivelycomplexed by the two mixed amide-(phosphine oxide) calixarenes, the twoester-containing isomers cone-2 and paco-2 turned out to be selective towards potassium and rubidium ions, respectively. With allfour ligands the lowest stability constants were found for the lithium andcesium ions.     

Fast and selective magnetic solid phase extraction of trace Cd, Mn and Pb in environmental and biological samples and their determination by ICP-MS

We have immobilized iminodiacetic acid on mesoporous Fe₃O₄@SiO₂ microspheres and used this material for efficient and cost effective method of magnetic solid phase extraction (SPE) of trace levels of Cd, Mn and Pb. The microspheres were characterized by infrared spectroscopy, scanning electron microscopy and transmission electron microscopy. The loaded microspheres can be easily separated from the aqueous sample solution by applying an external magnetic field. The effects of pH, sample volume, concentration and volume of eluent, and of interfering ions were investigated in detail. The method has detection limit of 0.16, 0.26 and 0.26?ng?L^?1 for the ions of Cd, Mn and Pb, respectively, and the relative standard deviations (RSDs, c?=?1???g?L^?1, n?=?7) are 4.8%, 4.6% and 7.4%. The method was successfully applied to the determination of these metals in biological and environmental samples using ICP-MS. Two certified reference materials were analyzed, and the results coincided well with the certified values.

Preconcentration and separation of ultra-trace palladium ion using pyridine-functionalized magnetic nanoparticles

We present a study on the application of magnetic nanoparticles (MNPs) prepared from Fe₃O₄ and functionalized with pyridine as an adsorbent for the solid-phase extraction of trace quantities of Pd(II) ion. The pyridine group was immobilized on the surface of the MNPs by covalent bonding of isonicotinamide. The modified MNPs can be readily separated from an aqueous solution by applying an external magnetic field. Effects of pH, the amount of functionalized MNPs, extraction time, type and quantity of eluent, desorption time, break-through volume and interfering ions on the extraction efficiency were optimized. The amount of Pd(II) was then determined using FAAS. Under the optimized conditions, the detection limit and preconcentration factor are 0.15?μg?L^-1 and 196, respectively, and the relative standard deviation (at 20?μgL^?1; for n?=?10) is 3.7?%. The method had a linear analytical range from 1 to 80?μg?L^-1 and was applied to determine Pd(II) in spiked tape water and soil.