Pulsed alkali pump light sources for Nd:YAG lasers

Pulsed arc discharges in alkali metal vapours are investigated for use as pump light sources for Nd:YAG lasers. Alkali lamps have a very high radiation efficiency and emit strong lines near the laser pump bands. These absorption bands are fitted by the emission spectrum of sodium and potassium lamps by changing the vapour pressure and input power. The spectral radiation distributions of the lamps are measured by a spectrograph with a gated OMA system. Ray tracing calculations for a laser cavity are used to evaluate the efficiency of the alkali radiation emission for Nd:YAG pumping. The results show that the excitation efficiency of the alkali lamps is twice as high as that of usually used rare gas lamps. For sodium resonance lines the side-on spectral radiance is calculated by a radiation transport model to estimate the pressure and the temperature profile. The results indicate that the alkali vapour lamps could be used as pump light sources with high efficiencies and low heat loading of the laser cavity.     

Mathematical modelling of an Nd: YAG laser: peak power and pulse width

In a previous paper, the author presented an empirically derived mathematical model of a pulse pumped laser which allowed calculation of the output energy from the laser—from the mirrors-only resonator to the fully assembled Q-switched state. In this paper the model is developed further by deriving an expression for the peak output power. New coupling and loss time constant are stated. The validity of the model is demonstrated by the ability of calculate the laser parameters from a measured pulse shape, knowing the rod dimensions and the pump energy at which the pulse was measured.     

Transmission properties of all-silica fibres for high-power Nd:YAG lasers

The transmission properties of two different types of all-silica fibres, step index and graded-index fibres, are investigated using a multimode high-power cw Nd:YAG rod laser. The reflections from the fibre surface back into the laser cavity affect the laser power and the beam parameters, waist diameter and divergence. A set-up for simultaneously measuring these values in front of and behind a fibre is presented. The maximum laser power transmitted by fibres is dependent upon the beam parameters, the fibre design and the surface conditions. An upper limit for the maximum divergence which can be coupled into a fibre with a certain numerical aperture without loss is given. The beam parameters behind the fibre, related to the input parameters, are presented.     

Experimental study of high-power pulse side-pumped Nd:YAG laser

The paper reports on the characterization of a compact and simple side-pumped 0.538 J×100 Hz pulse Nd:YAG laser. A side-pumping configuration with 100 laser diode bars is used in the laser head. We also experimentally studied the laser performance of the diode-pumped Nd:YAG laser head in the free running and Q-switched operation under different repetition rates.     

Quasi-CW diode pumped Nd:KGW laser at low temperature

We have studied the laser performance of Nd: KGW and Nd: YAG rods by monitoring the 1.06 μm laser emission at 78.5 K and 300 K. Our observations indicate that the laser efficiency from Nd: KGW is much higher than from Nd: YAG at these two temperatures. The laser threshold in Nd: KGW is lower at 78.5 K than at 300 K but it is always lower than that in Nd:YAG.     

Diffraction losses of Nd:YAG and Yb:YAG laser crystals

Based on space-dependent rate equations, the lowest threshold input power for a diode end-pumped solid-state laser is obtained for the pump spot size w_p→0. However, as the pump beam waist is decreased, the thermally induced effects in the laser rod would be very high. Diffraction losses caused by radial and tangential variations of refractive index have been analyzed and compared for the Nd : YAG and the Yb : YAG at room temperature (300 K) and liquid-nitrogen temperature (77 K).     

An automatically controlled Nd:YAG laser with variable pulse width

The development of a high-energy, pulsed Nd:YAG laser system for materials-processing and medical applications is reported here. A variable pulse width in the range of 0.3–10 ms and a variable pulse repetition rate up to 50 pps are provided. An automatic operation system using a microprocessor-based driver/ controller enables safe operation of the laser system and automatic material processing when integrated in a laser/robot system.     

Investigation of a Cr: YAG passive Q-switch in CW pumped Nd: YAG lasers

This work describes the experimental results obtained on the Cr⁴⁺:YAG crystal used as a passive Q-switch in Nd: YAG lasers. In addition, the combination of a Cr⁴⁺: YAG passive Q-switch with an acousto-optical Q-switch operating simultaneously in one cavity was investigated. More than 180 W average output in the passive Q-switched mode was obtained with the C⁴⁺: YAG crystal. The pulse-to-pulse stability was better than 1%. A mode selection occurred when the laser system operated near threshold.     

高平均功率六棒串接脉冲Nd:YAG激光器

报道了一种腔内六棒串接的脉冲Nd:YAG激光器。采用44矩阵对晶体棒失调角度对谐振腔光轴的影响进行了理论分析,给出了六棒串接脉冲激光器中晶体棒失调角度的允许范围。在串接实验中,谐振腔采用对称平平腔结构,通过调整每根晶体棒的失调角度到允许范围内,实现了六棒串接脉冲Nd:YAG激光器。在输入电功率86 kW,占空比17%时,获得了平均功率3 018 W的脉冲激光输出,峰值功率17.75 kW,最高单脉冲能量为66 J,光束参数乘积为26.3 mmmrad,电光转换效率3.5%,长时间工作不稳定性小于2%。     

Reduction of beam divergence of a thermal lensing insensitive Nd:YAG laser

In a previous paper we proposed an active resonator designed especially for Nd:YAG lasers. The beam generated by this resonator had a flat-top beam profile and a divergence that was insensitive to the thermal lensing effect. The beam generated by this resonator was, however, too divergent to be focused into a fibre. With the help of numerical simulations, we have found a way to reduce this divergence, and to render the far-field of the laser beam fine enough to be coupled into a fibre with 600 μm core and NA = 0.2.     

High power Nd:YAG slab laser sidepumped by diode laser array

ＨｉｇｈｐｏｗｅｒＮｄ：ＹＡＧｓｌａｂｌａｓｅｒｓｉｄｅｐｕｍｐｅｄｂｙｄｉｏｄｅｌａｓｅｒａｒｒａｙＣＨＥＮＹｏｕｍｉｎｇ；ＺＨＯＵＦｕｚｈｅｎｇ；ＨＵＷｅｎｔａｏ；ＬＩＺｈｉｓｈｅｎ；ＹＡＮＧＸｉａｎｇｃｈｕｎ；ＷａｎｇＺｈｉｊｉａｎｇ（Ｓｈａｎ...     

Nd:YAG laser delivery system utilizing GRIN rod lenses as focusing-collimating optics

A sequential electromechanical system capable of delivering the radiation coming from a medium power Nd:YAG laser to an array of multimode optical fibres is presented. The system utilizes GRIN-rod microlenses as focusing-collimating optics. A focusing unit positioned at the fibre distal-end, which can work in two different configurations, has also been designed and constructed.     

A Nd: YAG laser with a flat-top beam profile and constant divergence

An active resonator designed especially for Nd: YAG lasers is proposed. The expected performance of this resonator is the generation of a laser beam with a flat-topped distribution and a divergence invariant under the thermal lensing effect, such that it could be applied to surface treatment without special optical or mechanical elements. The beam quality and efficiency of such a resonator are presented and discussed in comparison with a parallel-plane resonator as adopted by most industrial Nd: YAG lasers.     

激光二极管侧面泵浦的高效率Nd：YAG激光器

用准连续激光二极管列阵侧面泵浦Ｎｄ：ＹＡＧ固体激光器，获得３９．５ｍＪ的静态输出，器件重复频率为５０Ｈｚ，效率最高达３９．５％，对该器件进行了细致的实验研究，验证了理论计算的正确性，并对实验结果进行了分析。     

LD泵浦Nd:YAG连续激光器转换性能实验研究

设计了LD端面泵浦固体Nd:YAG连续激光器平台,研究了LD泵浦功率、输出镜透过率和谐振腔腔长对激光器转换性能的影响. 该系统可实现连续1.064 μm近红外激光输出,转换效率可达42.2%.     

Investigation into absorption of the incident laser beam during Nd:YAG laser processing of metals

Laser materials processing is highly affected by the existence of surface plasma. The absorption of surface plasma during drilling alters the power intensity distribution of the incident laser beam across the irradiated spot. The present study is carried out to measure the electron number density and temperature using a Langmuir probe while a mathematical formulation is conducted for the absorption coefficients due to electron-ion, electron-neutral atom collisions, inverse Bremsstrahlung, and photoionization processes. Consequently, a computer program is developed to compute the relevant absorption coefficients as well as the overall absorption coefficient. The laser power intensity distribution before and after the plasma absorption is computed at a plane 2.6 mm above the workpiece surface. It is found that 13% of the reduction occurs in the incident laser output power intensity at this plane in the plasma.     

Performance studies of diode-side-pumped CW Nd:YAG laser in copper coated optical pump cavity

This paper reports the performance studies of Nd:YAG rods with different diameters and doping concentration in the CW diode-side-pumped geometry. We have used p-polarized diodes to pump the active medium and we studied the performance of different rods in terms of thermal lensing, its fluorescence profile, power output, and M² factor of the laser beam. We achieved a maximum of 378 W of output power for an input pump power of 757 W, which corresponds to optical conversion efficiency close to 50%. The slope efficiency of the system was 56.4%. These efficiencies are the highest reported to the best of our knowledge and we achieved with Nd:YAG rod at 1.1-at% doping.     

高平均功率调Q准连续Nd:YAG激光器

通过选用低掺杂浓度的Nd:YAG晶体棒、热近非稳腔优化设计、双棒串接热致双折射补偿技术以及双Q开关正交放置结构，在LD抽运功率1116W时，实现调Q准连续全固态Nd:YAG激光器1064nm输出，平均功率达258W，光束质量M²～15.5，重复频率为10kHz，脉冲宽度为64ns，峰值功率达0.4GW，光光转换效率达23.1%. 关键词： Nd:YAG激光器 准连续波 激光二极管抽运 固体激光器     

A novel high-peak power double AO Q-switches pulse Nd:YAG laser for drilling

This paper reports on the characterization and analysis of a novel high power with double acousto-optical (AO) Q-switch pulse laser. It is shown that two AO Q-switches, in which acousto-fields are perpendicular to each other, switch-loss is nearly three times larger than one AO Q-switch, one time larger than the two AO Q-switches in which acousto-field are parallel. The laser pulse bursts, with 5–50 kHz repetition rate of the burst, typically 200 ns duration, 400 kW the peak power, 5 mm mrad beam parameter product, are obtained. Using the laser for drilling, the perfect drilling results are given to a thinner recast layer.     

Efficient generation of blue light by intracavity frequency doubling of a cw Nd:YAG laser with LBO

We report on the efficient room-temperature operation of ⁴F_3/2–⁴I_9/2 transition in a diode pumped Nd:YAG laser operating at 946 nm. An output power of 5.1 W and a slope efficiency of 23.6% at 946 nm have been obtained. Different LBO crystals of length 3×3×10 mm³, 3×3×15 mm³, 3×3×18 mm³ were selected as frequency doubling material for comparison. A maximum single-ended output power of 1.3 W at 473 nm was achieved by frequency doubling with an optical conversion efficiency of 5%. When the Nd:YAG rod was replaced by the one with high reflectivity coating at 473 nm on the pump side, the output power of blue light was almost twice that without high reflectivity coating for 473 nm at the same pump power level. Moreover, the theoretical optimum length of LBO crystal for intracavity frequency doubling was discussed, and the experimental results made a good agreement with it.