Insights into the structure of covalently bound Fatty Acid monolayers on a simplified model of the hair epicuticle from molecular dynamics simulations

The epicuticle is the outermost layer of the human hair, and consists of a monolayer of fatty acids that is predominantly 18-methyleicosanoic acid (18-MEA) covalently bound to a protein matrix. Surprisingly, despite the clear scientific and industrial importance, the detailed molecular structure of this fatty acid layer is still poorly understood. In this work, we aim to gain insight into the structure of this so-called F-layer by performing molecular dynamics simulations on a simplified hair surface model consisting of a monolayer of 18-MEA covalently attached to graphene sheets at various separation distances. The relative free energy of the fatty acid layer was calculated as a function of separation distance in order to obtain the optimal packing density of the fatty acids. Conformational properties such as the thickness, tilt angle, and order parameter of the fatty acid layers were also calculated to characterize the structure of the F-layer. Simulations of the structurally similar eicosanoic acid (EA) were also performed as a comparison and to investigate the role of the anteiso-methyl side chain at the 18th position of 18-MEA. The degree of water penetration into the fatty acid layer at the various separation distances was also investigated. Our simulations suggest that the optimal spacing for the fatty acids is between 0.492 and 0.651 nm, in contrast to the generally accepted literature value of around 0.9-1.0 nm. This results in a packing density of between 0.21 and 0.37 nm(2) per fatty acid molecule and a thickness of around 2.01-2.64 nm. We also show that, at larger separation distances, the 18-MEA fatty acid provides a slightly better hydrophobic layer than the EA fatty acid, suggesting that the 18-MEA fatty acid may have been naturally selected to provide better protection for the hair when it loses some of the fatty acids due to daily wear and tear. To our knowledge, this is the first attempt to systematically investigate the hair surface structure and properties with molecular simulations.     

Effect of chain length on the assembly of mercaptoalkanoic acid multilayer films ligated through divalent Cu ions

The structural stability of alkenthiolate monolayers assembled on gold surfaces is a result of the well-defined organization of the individual molecules within the film. The formation of three-dimensional films assembled by stacking multiple molecular monolayers is substantially more challenging because the correct organization of the molecular components is required not only within the individual monolayers but also between the monolayers of the film. In this paper we examine the structure of multilayer films based on mercaptoalkanoic acid monolayers in which ligation between adjacent monolayers is achieved using the interaction of carboxylic acid and thiol groups with a divalent Cu ion. Using contact angle analysis and atomic force microscopy, we show that the use of Cu(2+) has profound implications on the properties and structure of the multilayer film. In particular, the divalent ions effectively prohibit the complete assembly of the next monolayer. For multilayer SAMs assembled from short alkane chains with six methylene groups, we find that molecules in the incomplete adlayer organize themselves randomly over the underlying monolayer. However, as the number of methylene groups increases (11 and 16 methylene groups), the upper layer tends to fracture into discrete islands which cover around 50% of the surface. The height of these islands is found to be equal to that expected for a complete, well-ordered monolayer assembled from the equivalent mercaptoalkanoic acid molecules. This relationship between chain length and island growth results from the migration of molecules into ordered aggregates driven by the reduction of free energy associated with maximizing intermolecular interactions.     

A low temperature phase transition in Langmuir-Blodgett films

The influences of temperature on the SFG spectra of Langmuir-Blodgett films of cadmium stearate, ferric stearate, stearic acid and octadecanamide are reported. Upon cooling, all films display reversible discontinuous shifts of approximately 8 cm (-1) in the r+, r- and rfermi modes of the terminal methyl groups at approximately 150 K. Reversible changes in the relative intensities of these methyl group peaks, most pronounced in the PPP spectra, are also observed and attributed to a change in the environment of the methyl group that accompanies a discontinuous transition in the ordering of their alkyl chains. The onset of new spectral features at higher frequency is attributed to the observation of ordered water molecules contained within the films. The correlation between the onset of the water features and the onset of the reversible, discontinuous, spectroscopic changes of the amphiphiles argues for a causal connection between the two. In addition to the discontinuous behavior upon cooling, monolayer films of stearic acid and octadecanamide display activity of methylene modes upon exposure to vacuum. Films displaying SFG-active methylene groups at room temperature had them gradually become completely SFG-inactive by 100 K. Heating the films to room temperature revealed that the methylene group activity was reversible. Monolayer films of cadmium stearate and ferric stearate do not display this methylene activity upon exposure to vacuum, suggesting that this behavior may be linked to solvation of the amphiphile's headgroup. These observations suggest that water plays a key role in the stability and structure of LB supported monolayers, and have important implications to those interested in low temperature (cryogenic) effects of biological systems.     

Phospholipid foam films studied by contact angle measurements and fluorescence microscopy

 Foam films drawn from suspensions of the phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphorylcholine (DMPC) in water/ethanol mixtures were used for the investigation of the relation between the properties of the monolayers and the interaction between the film surfaces. The film thickness and the contact angle between the film and the meniscus were measured as a function of the temperature in a range around the temperature of the main phase transition for the lipid. Additionally, fluorescence microscopy was applied to investigate the distribution of a fluorescent lipidlike dye in the surface of the film and the meniscus. From the contact angle the free energy of film formation was calculated. At the temperature of the chain-melting phase transition the film thickness decreases by 0.7 nm. This can be related to a decrease in the thickness of the hydrocarbon layers of the lipid monolayers at this temperature. The decrease in the film thickness leads to a reduction in the free energy by increasing the van der Waals attraction between the film surfaces. No structures were observed in the monolayers of the film in the fluorescence investigation. However, on formation of the very thin equilibrium film the dye was expelled from the film area, indicating an increase in the packing density of the lipid, if the monolayers are in adhesive contact in the film. Received: 31 January 2000 Accepted: 25 February 2000     

SYNTHESIS AND PROPERTIES OF SULFONATED POLY（ARYLENE ETHER） CONTAINING TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.     

CdSe sensitized thin aqueous films: probing the potential distribution inside multilayer assemblies

Ultrathin polypeptide multilayer films are assembled by the sequential electrostatic adsorption of monolayers of poly-l-lysine and poly-l-glutamic acid onto carboxylic acid terminated alkanethiol-modified gold surfaces. The polypeptide multilayer films are hydrophilic, can incorporate electroactive species such as ferri/ferrocyanide, and are stable when immersed in organic solvents such as 1,2-dichloroethane. Cadmium selenide quantum dots stabilized by negatively charged citrate groups are electrostatically attached to the multilayer film assembly in order to act as photoactive species. Photocurrent responses originating from the CdSe sensitized ultrathin multilayer film are investigated as functions of the applied potential, the thickness of the film and the presence of quenchers in the organic phase. A theoretical model is proposed in order to analyze the kinetics of the photoinduced electron-transfer reactions and to probe the potential distribution within the film.     

Characterization of self-assembled monolayers from lithium dialkyldithiocarbamate salts

We report the formation of self-assembled monolayers (SAMs) onto gold substrates by exposure to lithium dialkyldithiocarbamate salts [(Li+(R2DTC-), where R = n-propyl, n-butyl, n-octyl, n-decyl, n-dodecyl, or n-octadecyl] in ethanol or methylene chloride. The crystallinity and composition of the monolayers were assessed by polarized modulation infrared reflection absorption spectroscopy (PM-IRRAS), wettability was characterized by contact angles of water and hexadecane, thickness was measured by spectroscopic ellipsometry, and barrier properties determined by electrochemical impedance spectroscopy. While the shorter R2DTC-s formed monolayers with liquid-like packing, monolayers prepared from the longest R2DTC- (where R = n-octadecyl) exhibit similar thickness, crystallinity, wettability, and capacitance as monolayers prepared from n-octadecanethiol. The hydrocarbon chains within the monolayers prepared from (C18)2DTC- are less canted on average than those prepared from n-octadecanethiol. Nonetheless, the (C18)2DTC- SAM exhibits an order of magnitude lower resistance against the penetration of redox probes, which is attributed to a higher density of pinhole defect sites.     

Solution-deposited organic-inorganic hybrid multilayer gate dielectrics. Design, synthesis, microstructures, and electrical properties with thin-film transistors

We report here on the rational synthesis, processing, and dielectric properties of novel layer-by-layer organic/inorganic hybrid multilayer dielectric films enabled by polarizable π-electron phosphonic acid building blocks and ultrathin ZrO(2) layers. These new zirconia-based self-assembled nanodielectric (Zr-SAND) films (5-12 nm thick) are readily fabricated via solution processes under ambient atmosphere. Attractive Zr-SAND properties include amenability to accurate control of film thickness, large-area uniformity, well-defined nanostructure, exceptionally large electrical capacitance (up to 750 nF/cm(2)), excellent insulating properties (leakage current densities as low as 10(-7) A/cm(2)), and excellent thermal stability. Thin-film transistors (TFTs) fabricated with pentacene and PDIF-CN(2) as representative organic semiconductors and zinc-tin-oxide (Zn-Sn-O) as a representative inorganic semiconductor function well at low voltages (<±4.0 V). Furthermore, the TFT performance parameters of representative organic semiconductors deposited on Zr-SAND films, functionalized on the surface with various alkylphosphonic acid self-assembled monolayers, are investigated and shown to correlate closely with the alkylphosphonic acid chain dimensions.     

Interfacial properties of free-standing poly(3-hexylthiophene) films

Using full atomistic classical molecular dynamics simulations, the interfacial properties of free-standing poly(3-hexylthiophene) (P3HT) films have been investigated. The orientations of different parts of the P3HT chain and the surface tensions of the films were calculated in a temperature range of 540 K-600 K. At the liquid/vacuum interface, the P3HT chain shows ordering by exposing hexyl groups at the interface, while the chain backbone lays flat with the thiophene ring preferentially tilt toward the surface. At the interface, the terminal methyl groups of hexyl side chains are in excess compared to the methylene groups or thiophene rings. The surface tension of P3HT in its melt state shows similar temperature dependence to that of polymers that have long alkyl side chains. The surface tension values are comparable to those polymers that expose methyl or methylene groups on the surface. The surface tension values determined for the melt state are lower than the experimental reported values for crystalline P3HT films, as expected.     

Mixed monolayers of Gemini surfactants and stearic acid at the air/water interface

The properties of mixed monolayers composed of the cationic Gemini surfactant ([C(18)H(37)(CH(3))(2)N(+)(CH(2))(3)N(+)(CH(3))(2)C(18)H(37)],2Br(+), abbreviated as 18-3-18,2Br(-1)) and stearic acid (SA) at the air/water interface were investigated by using a Langmuir film balance. The excess areas at the different mixed monolayer compositions were obtained and used to evaluate the miscibility and nonideality of mixing. Due to the electrostatic attractive interactions between 18-3-18,2Br(-1) and SA, the excess areas indicated negative deviations from ideal mixing. Moreover, 18-3-18,2Br(-1) and SA were miscible at the air/water interface, as was confirmed by atomic force microscopy (AFM) images of the LB films transferred onto mica substrates. The attenuated total reflectance (ATR) infrared spectra showed that SA in the mixed monolayers was ionized completely at a composition X(SA)=0.67 and formed a "cationic-anionic surfactant," i.e., the carboxylate, with 18-3-18,2Br(-1) owing to the electrostatic interaction between the head groups.     

Kinetics of pH response for copolymer films with dilute carboxylate functionality

We have investigated the effects of film composition and thickness on the rate of pH-induced response of a copolymer film containing predominately polymethylene with randomly distributed carboxylic acid side groups (denoted as PM-CO2H). These responsive films are prepared directly onto a gold electrode surface by surface-catalyzed polymerization and subsequent hydrolysis. We measured electrochemical impedance at fixed frequency (100 Hz) to monitor the barrier properties of the polymer film during a step change in pH. At a 1-3% molar acid content, the copolymer films exhibit a 2 order of magnitude change in impedance at 100 Hz when the contacting solution pH changes from 11 to 4 (or 4 to 11). For all films, the rate of protonation is slower than that of ionization, consistent with a more gradual transfer of protons through an increasingly hydrophobic film at the outermost nanometers during the protonation step. Increased acid content within the film accelerates both the rate of protonation and ionization. Thinner films (50 nm) with the same acid content show faster response rate in both directions, since water and ions have a shorter transfer path. A large and reversible pH response was obtained for all films studied, but selection of appropriate film composition and thickness can greatly influence the rate of response.     

Preparation, characterization, and application of polypropylene-clinoptilolite composites for the selective adsorption of lead from aqueous media

The miscibility, mechanical and morphological properties of mixed Langmuir and Langmuir-Blodgett monolayers prepared from the phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and the perfluorinated fatty acid perfluorooctadecanoic acid have been studied as a function of film composition and subphase salinity. It was demonstrated here, for the first time, that the extent of surfactant miscibility in mixed phospholipid-perfluoroacid monolayers, and hence the resulting mechanical properties of the monolayer film, can be controlled by altering the concentration of sodium ions in the underlying subphase. Elevated Na(+) concentrations resulted in lower net attractive interactions between film components, likely through specific ion adsorption to the negatively-charged perfluoroacid, along with decreased film elasticities. These results differ significantly from conventional fatty-acid-carboxylate monolayer systems in which film cohesion is typically enhanced through adsorption of cations to surfactant headgroups. Atomic force microscope images of films deposited onto solid mica substrates revealed that the films deposited from pure water formed multimolecular aggregates of surfactant, which could be attributed to the highly cohesive nature of the films, but the use of salt in the subphase diminished aggregate formation and resulted in the production of homogeneous monolayer films.     

Langmuir monolayers based on rigid wedge-shaped dendrons of benzenesulfonic acid

The structure formation of wedge-shaped monodendrons based on symmetric benzenesulfonic acid with different lengths of peripheral alkyl chains was studied in Langmuir monolayers and Langmuir–Blodgett (LB) films. A phase transition from the liquid-expanded state to the liquid-condensed state was observed on compression of the Langmuir monolayers of the dendrons containing dodecyl lateral chains. The transition is accompanied by the formation of star-shaped aggregates visualized by Brewster angle microscopy. The three-layer LB transfer results in the reorganization of the monolayer into regions of bi-, tetra-, and hexalayers on a solid substrate with a low coverage of the surface. Homogeneous liquid-condensed mono layers are formed for the dendrons with hexa- and octadecyl chains, and the film thickness achieved by the LB transfer corresponds to the monolayer alignment of the molecules with the surface coverage up to 90%. It was determined that varying the alkyl length of wedge-shaped dendrones based on symmetric benzenesulfonic acid leads to a change in phase behavior of Langmuir monolayers as well as Langmuir–Blodgett films formed by them.     

Tuning the interfacial properties of grafted chains with a pH switch

Environmentally responsive, water-soluble polymers have a wide variety of uses ranging from drug delivery to viscosity modifiers. Their utility lies in the ability to use environmental perturbations to dramatically alter the material properties. Here, we describe the interfacial properties of a hydrophobically modified copolymer of N-isopropylacrylamide and glycinylacrylamide (NIPAM-N-Gly-(C18)2), which is both temperature and pH responsive. Direct force measurements quantified the substantial pH-dependent change in the molecular properties of end-grafted NIPAM-N-Gly-(C18)2 monolayers. At pH 8.0, where the glycine side chains are ionized, the polymers exhibit stereotypical polyelectrolyte behavior. Side chain neutralization at pH 5.0 causes a substantial decrease in the film thickness, and the polymer films adhere strongly. The adhesion is presumably through H-bonding between the glycine side chains. Our findings revealed the likely molecular basis of pH-dependent changes in the copolymer films and identified clear design criteria for tuning the interfacial properties of these polymer films.     

Multilayer nitroazobenzene films covalently attached to carbon. An AFM and electrochemical study

Nitroazobenzene films have been grafted to pyrolyzed photoresist films by electrochemical reduction of the corresponding diazonium salt in acetonitrile solution. Two component films were also prepared by electrochemically grafting methylbenzene layers to preformed NAB films. Voltammetric investigation of the films in aqueous acid medium and the measurement of film thickness using atomic force microscopy (AFM) lead to new insights into film structure. In aqueous acid solution, the azobenzene groups have no detectable electroactivity and not all nitro groups in the films can be reduced. These findings point to a compact film structure in which proton diffusion is limited. There may also be spatial inhibition of the conformational changes that accompany azobenzene reduction. For increasingly thick NAB films, the peak for reduction of the nitro groups moves to more negative potentials and the peaks become more asymmetric in shape. These changes are interpreted in terms of the dielectric properties and the rate of proton diffusion in the films. Film thickness was measured by ploughing through the film with an AFM tip. When an NAB film prepared in acetonitrile solution is reduced in aqueous acid, the film thickness decreases by more than 50%. The changes can be partially reversed by treatment in acetonitrile-electrolyte solution and hence are attributed to ion-solvent induced swelling and shrinking. Thus, the large decrease in thickness detected by AFM after treatment of the film in aqueous acid is consistent with the compact film structure revealed by electrochemistry.     

Computer simulation studies of Newton black films

We study via molecular dynamics simulations thin films (Newton black films, NBF) consisting of water coated with sodium dodecyl sulfate (SDS) surfactants. We analyze in detail the film properties (distribution of particles, pair correlation functions, roughness of the film, tilt angle of the hydrocarbon chain, electron density profiles, and mobility of water molecules) as a function of water content in the film core (i.e., film thickness, H). Our simulations indicate that water is part of the bilayer structure as solvation water. We estimate that around 2.25 water molecules per surfactant are part of this solvation structure. The structural analysis of the NBF shows that the headgroups exhibit a high degree of in-plane ordering. We find evidence for the existence of cavities in the monolayer, where only water is present. The basic structure of the monolayer is conserved down to water contents of the order of 4 water molecules per surfactant (H approximately equal to 11 A). The computed monolayer roughness for the present model is 2.5 A, in good agreement with the experimental data. We find that the roughness is very sensitive to the details of the interatomic potentials. Water mobility calculations emphasize the sluggish dynamics of very thin NBF. Diffusion coefficients of water in the lateral direction strongly decrease with film thickness. We find that the typical mean squared displacement of water in the direction normal to the bilayer is between 9 and 80 A2. Overall, our results indicate that the equilibrium SDS Newton black films studied in the X-ray experiments contain from 2 to 4 water molecules per surfactant.     

Thin film order of symmetric diblock copolymers

The ordering in thin films of symmetric diblock copolymers of polystyrene and poly(methyl methacrylate) has been investigated by neutron reflectivity as a function of film thickness and temperature. The order-disorder transition in the thin films was found to lose its first order character in that the transition occurs in a continuous manner without the correlation length becoming infinite. In addition, a transition from a partially to fully ordered state was observed which was fully reversible. This transition depended in a power law manner on the film thickness and extrapolates to the bulk order-disorder transition temperature for thick films.     

Stability and disintegration of ultrathin heptane films in water: molecular dynamics simulations

Molecular dynamics simulations of ultrathin heptane films (less than 5 nm in thickness) in water were conducted to study their stability and disintegration behavior. The density distributions of heptane and water molecules across the film were determined for different equilibrium film thicknesses ranging from 1.5 to 4 nm. The potential energy of the system was computed as a function of the heptane number fraction, and the results were employed to determine the excess energy of mixing of heptane in water. The diffusion coefficients of heptane and water obtained from the MD simulations were also compared with experimental data. A good agreement was found between the heptane self-diffusivity obtained from the MD simulations and its literature reported value. Following an analysis of the equilibrium properties of the heptane films and associated structures, we performed simulations where the shapes of the heptane films were initially perturbed. Different perturbations of these ultrathin films led to formation of various associated structures, including cylindrical rodlike heptane droplets, films with holes, and intact films. The different shapes are formed in systems with the same heptane/water composition. An analysis of this behavior is presented showing the possibility of multiple associated structures with similar total energy in these highly confined systems.     

聚苯乙烯-聚(4-乙烯基吡啶)嵌段共聚物LB膜结构形态的研究

采用氯仿作为铺展溶剂,将嵌段共聚物聚苯乙烯-聚(4-乙烯基吡啶)(PS-b-P4VP)稀溶液铺展于空气与水界面上,利用Langmuir-Blodgett(LB)膜技术转移至固体基底.研究了不同的嵌段比、表面压和小分子1-芘丁酸(PBA)的加入对嵌段共聚物气液界面聚集组装的影响.研究发现随着亲水段(P4VP)的增加,聚集组装结构由纳米片状、带状转变成纳米条状、纳米点状结构.表面压对纯PS-b-P4VP聚集组装产生影响,表面压增大,组装体排列紧密;随着表面压的继续增大,单层聚集结构遭到破坏,发生堆叠.加入PBA小分子后,PBA与PS-b-P4VP形成氢键,形态发生明显变化,原来的片状结构转变为条状或点状结构.     

Molecular simulations of surface forces and film rupture in oil/water/surfactant systems

We use dissipative particle dynamics (DPD) and molecular models to simulate interacting oil/water/surfactant interfaces. The system comprises sections of two emulsion droplets separated by a film. The film is in equilibrium with a continuous phase, in analogy with the surface force apparatus. This is achieved by combining DPD with a Monte Carlo scheme to simulate a muVT ensemble. The setup enables the computation of surface forces as a function of the distance between the two interfaces, as well as the detection of film rupture. We studied monolayers of nonionic model surfactants at different densities and compared oil-water-oil and water-oil-water emulsion films. Between surfactant monolayers facing each other tails-on (water-oil-water films), we observed repulsive forces due to the steric interaction between overlapping hydrophobic tails. The repulsion increases with surfactant density. Conversely, no such repulsion is observed between surfactant monolayers facing each other heads-on. Instead, the film ruptures, the monolayers merge, and a channel forms between the two droplet phases. Film rupture can also be induced in the water-oil-water films by forcing the interfaces together. The separation at rupture increases for oil-water-oil films and decreases for water-oil-water films when the surfactant density increases. The results are in qualitative agreement with existing theories of emulsion stability in creams, in particular with the channel nucleation theory based on the natural curvature of surfactants.