Ligand topology variations and the importance of ligand field strength in non-heme iron catalyzed oxidations of alkanes

A series of iron(II)-bis(triflate) complexes [Fe(L)(OTf)2] containing linear tetradentate bis(quinolyl)-diamine and bis(quinolylmethyl)-diamine ligands with a range of ligand backbones has been prepared. The coordination geometries of these complexes have been investigated in the solid state by X-ray crystallography and in solution by 1H and 19F NMR spectroscopy. Because of the labile nature of high-spin iron(II) complexes in solution, dynamic equilibria of complexes with different coordination geometries (cis-alpha, cis-beta, and trans) are observed with certain ligand systems. In these cases, the geometry observed in the solid-state does not necessarily represent the only or even the major geometry present in solution. The ligand field strength in the various complexes has been investigated by variable-temperature (VT) magnetic moment measurements and by UV-vis spectroscopy. The strongest ligand field is observed with the most rigid ligand that generates [Fe(L)(OTf)2] complexes with a cis-alpha coordination geometry, and the corresponding [Fe(L)(CH3CN)2]2+ complex displays spin crossover behavior. The catalytic properties of the complexes for the oxidation of cyclohexane have been investigated using hydrogen peroxide as the oxidant. An increased flexibility in the ligand results in a weaker ligand field, which increases the lability of the complexes. The activity and selectivity of the catalysts appear to be related to the strength of the ligand field and the stability of the catalyst.     

Oxidative degradation of beta-diketiminate ligand in copper(II) and zinc(II) complexes

Copper(II) and zinc(II) complexes supported by a popular beta-diketiminate ligand (1(-), 2-mesitylamino-4-mesitylimino-2-pentene), [CuII(1)(AcO)] and [[ZnII(1)]2(mu-MeO)(mu-AcO)], have been demonstrated to undergo an oxidative degradation to give a ketone diimine derivative (2) under aerobic conditions. The crystal structures of the mononuclear copper(II) and dinuclear zinc(II) complexes of the beta-diketiminate ligand as well as the copper(II) complex of the modified ligand have been determined by X-ray crystallographic analysis. Mechanism for the oxidative degradation reaction of the beta-diketiminate ligand is also discussed.     

Coordination chemistry of a terpyridine-tris(pyrazolyl) ditopic ligand

A new ditopic ligand, 4'-(4-(2,2,2-tris(1H-pyrazol-1-ido)ethoxymethyl)phenyl)-2,2':6',2'-terpyridine (pzt), has been prepared and its coordination chemistry studied. Metal ions with a preference for octahedral geometry form ML(2) complexes that are readily isolated and characterised, with the metal ion being bound to the terpyridine sites of both ligands. Other metal ions bind to the terpyridine site of just one ligand. In the case of silver(i), a dinuclear M(2)L(2) complex has been isolated in which each silver ion is coordinated to the terpyridine site of one ligand and to a single pyrazolyl donor group from the second ligand. Evidence for binding of metal ions to the tris(pyrazolyl) binding site was obtained by electrospray mass spectrometry and NMR techniques. The free ligand and three metal complexes, including the disilver complex, have been characterised by X-ray crystallographic techniques.     

Formation of RACK- and grid-type metallosupramolecular architectures and generation of molecular motion by reversible uncoiling of helical ligand strands

The interaction of appropriate metal ions (Pb(II), Zn(II)) with helical ligand strands, obtained by hydrazone polycondensation, generates polymetallic supramolecular architectures of rack and grid types, by uncoiling of the ligand. The interconversion between the helical free ligand and the linearly extended ligand in the complexes produces reversible ion-induced, nanomechanical molecular motions of large amplitude. It has been integrated in an acid-base neutralisation fuelled process, which links the extension/contraction of the ligand strands to alternating changes in pH.     

Sandwich compounds of cyanotrispyrazolylborates: complexation-induced ligand isomerization

Reaction of the new cyanoscorpionate ligand, hydrotris(4-cyano-3-phenyl)pyrazolylborate (Tp(Ph),(4CN)) with Co(II), Mn(II), and Fe(II) unexpectedly results in the isolation only of crystals containing sandwich complexes in which the ligands have been isomerized to produce the heterocyanoscorpionate hydrobis(4-cyano-3-phenylpyrazolyl)(4-cyano-5-phenylpyrazolyl)borate (Tp(Ph),(4CN*)). The three complexes have been characterized crystallographically and are isostructural, with each ligand acting in a tridentate manner toward the metal. The isomerization of the ligand appears to be more facile than that of the analogous non-cyano ligand, Tp(Ph), with which crystals of the unisomerized sandwich compound have been isolated for Mn(II) and Fe(II).     

Complexation of dimethylmagnesium with alpha-diimines; structural and EPR characterisation of single electron and alkyl transfer products

Treatment of dimethylmagnesium with the alpha-diimine ligands Ar'N=C(R)C(R)=NAr' [R = naphth-1,8-diyl (1), H (2), CH3 (3); Ar' = 2,6-diisopropylphenyl] in diethyl ether provides the neutral methyl-bridged dimeric complexes [(alpha-diimine-.)Mg+(mu-CH3)]2 via single electron transfer (SET) to the coordinated diimine and elimination of a methyl radical. These biradical species have been characterised by EPR spectroscopy and, for the ligand , X-ray crystallography. In the presence of THF the reaction of ligand proceeds to the diamagnetic [(ene-1,2-diamide)Mg(THF)3] complex in which the diimine ligand has been doubly reduced to an ene-diamide by two successive SET processes. Comparison of the structural data for the free ligand with that obtained for the alpha-diimine radical anion and ene-diamide complexes shows the expected increases in C-N, and decreases in C-C, bond lengths within the N-C-C-N unit consistent with the progressive reduction of the ligand. In the case of ligand , reaction at low temperature provides the complex [Mg(mu2-Me){Ar'NC(Me)2C(Me)NAr'}]2 in which methyl transfer to a ligand imine carbon atom has occurred. This species has also been structurally characterised. This contrasts with the formation of the radical species at room temperature, and indicates the involvement of an intermediate in which the radical products of the SET process are held in close proximity by the solvent cage. Two competing processes of methyl radical escape and methyl transfer to the ligand account for the formation of the observed products at different temperatures.     

Stereochemistry of new nitrogen containing heterocyclic aldehyde. IX. Spectroscopic studies on novel mixed-ligand complexes of Rh(III)

Mono, bis and tris complexes of rhodium(III) oxine (systematic name 8-hydroxy-7-quinolinecarboxaldehyde) and mixed ligand have been prepared. The amine exchange reaction of coordinated Schiff base in these complexes has also been carried out, which gives symmetrical tetradentate Schiff base complexes. The complexes are characterized by elemental and thermal analysis, IR, magnetic and electronic spectral analysis methods were also employed as well as conductivity measurements. An octahedral structure is proposed for all the new complexes in which chloride is attached to the metal ion in 1:1; 1:2 (metal:ligand) ratio. The spectral data were utilized to compute the important ligand field parameter B, beta and Dq. The B-values suggest a strong covalency in the metal-ligand sigma-bond and the Dq-values indicate a medium strong ligand field. 1H NMR spectra show that the tris (ligand) complex is cis isomer. IR spectra show that the ligand is mono-basic bidentate.     

Copper speciation by competing ligand exchange method using differential pulse anodic stripping voltammetry with ethylenediaminetetraacetic acid (EDTA) as competing ligand

A technique has been developed to study chemical speciation of copper in freshwaters by competing ligand exchange (CLE) method using anodic stripping voltammetry (ASV) in the differential pulse (DP) mode with ethylenediaminetetraacetic acid (EDTA) as a competing ligand. The voltammetric behavior of Cu(II)-EDTA complex has been investigated using DPASV. When DPASV is used at an appropriate deposition potential, the inert Cu(II)-EDTA complex becomes electroactive, and is reduced directly. Furthermore, at the same deposition potential, Cu(II)-fuvic acid and Cu(II)-humic acid complexes do not contribute significantly to the analytical signal, which makes EDTA a suitable competing ligand in the determination of copper speciation using CLE-ASV. This method has been applied to freshwater samples from Rideau Canal (Ottawa, ON, Canada). The analysis of the copper titration data of these freshwater samples has indicated the presence of a very strong copper-binding ligand with a conditional stability constant of approximately 10²⁰ and a corresponding very high concentration (above 100 nM) of the ligand.     

Increased antenna effect of the lanthanide complexes by control of a number of terdentate N-donor pyridine ligands

Three europium complexes with the terdentate N-donor ligand 2,6-bis(1H-pyrazol-3-yl)pyridine (L) have been synthesized, and their crystal structures have been determined. The ligand/metal ratios in these complexes are 3, 2, and 1. The photophysical properties of the complexes indicate more efficient ligand sensitization of europium emission for the homoleptic complex.     

Combination of CuBr2 and multi-functional ligand bearing a bidentate nitrogen unit,a phenol group and a TEMPO moiety as catalyst for the aerobic oxidation of primary alcohols

A novel ligand (L) bearing a bidentate nitrogen ligand unit, a phenol group and a TEMPO moiety has been synthesized. The ligand has been used as a catalyst precursor for the copper-catalyzed aerobic oxidation of alcohols to aldehydes, in the presence of K₂CO₃. The complex obtained in-situ from the ligand with copper(II) bromide (CuBr₂) in a 2:1 acetonitrile/water mixture, selectively catalyzes the aerobic oxidation of primary benzylic and allylic alcohols to their corresponding aldehydes, and no over-oxidation products are detected.     

Synthesis and reactivity of tetrakis(imino)pyracene (TIP) ligands; bifunctional analogues of the BIAN ligand class

The first two examples of a new class of bifunctional BIAN-type ligand have been prepared, and the reactions of one such ligand with CuBr(2) and BCl(3) have been explored.     

Non-covalent polymerisation in the solid state: halogen-halogen vs. methyl-methyl interactions in the complexes of 2,4-di(2-pyridyl)-1,3,5-triazine ligands

Fe(II), Co(II), Ni(II) and Cu(II) complexes based on the triazine ligand 2,4-di(2'-pyridyl)-6-(p-bromo-phenyl)-1,3,5-triazine have been synthesised and characterised. The electrochemical, magnetic and spectroscopic properties of the complexes have also been investigated, and the electron deficient triazine ligand has been shown to affect each of these properties. Further investigation of solid state structures of the ligand and its Fe(II), Co(II) and Cu(II) complexes has established that stabilising Br-Br interactions exist which link neighbouring molecules to form one-dimensional tapes. A slight modification of the ligand, i.e., using 2,4-di(2'-pyridyl)-6-(p-methylphenyl)-1,3,5-triazine, in which the phenyl substituent has changed from a bromine to a methyl group, eliminates the one-dimensional tape and gives rise to significant pi-stacking interactions in the solid state.     

三芳胺合成的研究进展

三芳胺化合物的合成方法主要有3种:(1)非金属催化的胺化反应;(2)铜催化的Ullnann反应,包括使用过量铜粉为催化剂的传统的Ullmann反应、使用相转移催化剂的Ullmann反应以及使用配体的post-Ullmann反应;(3)钯催化的Buchwald-Hartwig反应.该类反应活性的关键是配体的选择,根据配体结构的不同可分为双膦螯合型配体、单膦配体和非膦配体.对该类化合物的这几种合成方法的研究进展进行了总结.     

Probing the potential of N-heterocyclic carbenes in molecular electronics: redox-active metal centers interlinked by a rigid ditopic carbene ligand

Bimetallic homonuclear iron(II) and ruthenium(II) N-heterocyclic carbene complexes have been synthesized and crystallographically analyzed. As a spacer ligand for interconnecting the two redox-active metal centers, a ditopic carbene ligand has been used that comprises two carbene sites annelated to benzene. Detailed electrochemical and spectroelectrochemical analyses of the bimetallic systems revealed that despite the potentially pi-delocalized nature of the ditopic ligand, the iron centers are only moderately coupled. In the ruthenium complexes, the intermetallic interactions are very weak and the centers are electrochemically nearly independent. A model is proposed for rationalizing these observations which is based on (I) relatively weak charge delocalization in the spacer ligand and (II) on electrostatic factors governing the metal-carbene bond.     

Fine-tuning the weak-link approach: effect of ligand electron density on the formation of rhodium(I) and iridium(I) metallomacrocycles

A novel bis(phosphinoalkyl-thioether)arene ligand with a fluorinated aryl group (1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)F(4)) has been synthesized. This ligand has been used to prepare symmetric bimetallic structures with Rh(I) and Ir(I) metal centers in high yield. Unlike their nonfluorinated counterparts, these complexes can be opened into large macrocyclic structures through straightforward ligand (i.e., carbon monoxide, nitriles, and isocyanides) substitution reactions at the metal-thioether linkage. In addition, the symmetric bimetallic structures have been shown to react with appropriately sized bifunctional aromatic molecules to form three-tiered host-guest structures.     

Infrared and DNA-binding on ultraviolet and fluorescence spectra of new copper and zinc complexes with a naringenin Schiff-base ligand

A naringenin Schiff-base ligand (H(3)L) and its copper(II) and zinc(II) complexes have been synthesized and characterized by elemental analyses, molar conductivities, (1)H NMR, IR spectra, UV spectra and thermal analyses. The DNA-binding properties of the Cu(II) and Zn(II) complexes have been investigated by fluorescence spectroscopy, ultraviolet spectroscopy and by viscosity measurements. The results indicate that complexes and ligand may bind to DNA by intercalation modes, but the binding affinity of the complexes is much higher than that of the ligand.     

Synthesis, characterization, antioxidative activity and DNA binding properties of the copper(II), zinc(II), nickel(II) complexes with 1,2-Di(4'-iminonaringenin)ethane

A novel naringenin Schiff base ligand (1,2-di(4'-iminonaringenin)ethane, H6L) and its three transition metal complexes [Cu(II) complex (1), Zn(II) complex (2), and Ni(II) complex (3)] have been prepared and characterized on the basis of elemental analysis, molar conductivity, 1H-NMR, mass spectra, UV-vis spectra, and IR spectra. The DNA-binding properties of the ligand and its complexes have been investigated by absorption spectroscopy, fluorescence spectroscopy, ethidium bromide (EB) displacement experiments, and viscosity measurement. The results indicated that the ligand and its complexes can bind to DNA. The binding affinity of the Cu(II) complex (1) is higher than that of the ligand and the other two complexes. The intrinsic binding constant (Kb) of the complex (1) is 3.3x10(6). In addition, the suppression ratio for O2-. and HO. was determined. The 50% inhibition obtained for the ligand and its three complexes demonstrates that, compared to the ligand, the complexes exhibit higher antioxidative activity in the suppression of O2-. and HO..     

溴化钯或乙酰丙酮羰基铑/手性配体催化醛与乙酰胺的不对称酰胺羰化反应研究

采用溴化钯为催化剂前体,与非螯合型双齿膦配体L1(DPPFF)、联吡啶型双齿膦配体L2(P-PHOS)和二茂铁基手性双膦配体L3((S,Rp)-BPPF)制备络合物催化剂,以乙酰丙酮羰基铑为催化剂前体,与手性亚磷酸酯配体L4-L6制备络合物催化剂,将其分别应用于底物环己基甲醛或苯乙醛的不对称酰胺羰化反应中,研究结果表明...     

Complexes of metallons with phosphorus or arsenic containing ligands. II. complexes ortho-carboxyphenyltertiaryarsines with mercury (II) halides

Ortho-carboxyphenyl-dimethylarsine (CPDMA), ortho-carboxpyhenyldiphenylarsine (CPDPA) and ortho-carboxyphenyldi(p-tolyl)arsine (CPDTA) react with mercury(II) halides to yield complexes having the formula HgX₂L where X is Cl, Br or I and L is ligand. In view of infrared spectral data these complexes have been classified into two classes: (a) those in which the carboxyl group of the ligand remains free (ligand being monodentate), and (b) those in which the ligand acts as a bidentate group. The complex Hg(Cl₂) · CPDPA is the only example of type (a) and has been assigned a dimeric halogen bridged structure. The remaining eight complexes are assumed to be monomeric. A tetrahedral structure is proposed for all the nine complexes.     

Structural and theoretical basis for ligand exchange on thiolate monolayer protected gold nanoclusters

Ligand exchange reactions are widely used for imparting new functionality on or integrating nanoparticles into devices. Thiolate-for-thiolate ligand exchange in monolayer protected gold nanoclusters has been used for over a decade; however, a firm structural basis of this reaction has been lacking. Herein, we present the first single-crystal X-ray structure of a partially exchanged Au(102)(p-MBA)(40)(p-BBT)(4) (p-MBA = para-mercaptobenzoic acid, p-BBT = para-bromobenzene thiol) with p-BBT as the incoming ligand. The crystal structure shows that 2 of the 22 symmetry-unique p-MBA ligand sites are partially exchanged to p-BBT under the initial fast kinetics in a 5 min timescale exchange reaction. Each of these ligand-binding sites is bonded to a different solvent-exposed Au atom, suggesting an associative mechanism for the initial ligand exchange. Density functional theory calculations modeling both thiol and thiolate incoming ligands postulate a mechanistic pathway for thiol-based ligand exchange. The discrete modification of a small set of ligand binding sites suggests Au(102)(p-MBA)(44) as a powerful platform for surface chemical engineering.