Argon matrix effect on the geometry and infrared spectrum of H2CMH2 (M = Ti, Zr, Hf): A theoretical study

Within the framework of polarizable continuum model with integral equation formalism (IEF-PCM), an argon matrix effect on the geometry and infrared frequencies of the agostic H₂CMH₂ (M = Ti, Zr, Hf) methylidene complexes was investigated at B3LYP level of theory with the 6-311++G(3df,3pd) basis set for C, H, and Ti atoms and Stuttgart/Dresden ECPs MWB28 and MWB60 for the Zr and Hf atoms. At the B3LYP/IEF-PCM level of theory, H₂CTiH₂ was optimized to an energy minimum having a pyramidal structure. The calculated dipole moment of this structure is 3.06 D. The B3LYP/IEF-PCM simulations gave the three complexes’ agostic angle ∠HCM (°), distance r(H?M) (Å), and CM bond length r(CM) (Å) as follows: ∠HCTi = 87.4, r(H?Ti) = 2.079, r(CTi) = 1.803; ∠HCZr = 89.3, r(H?Zr) = 2.243, r(CZr) = 1.956; ∠HCHf = 94.7, r(H?Hf) = 2.343, r(CHf) = 1.972. As a comparison, the B3LYP simulations gave the values as follows: ∠HCTi = 91.5, r(H?Ti) = 2.150, r(CTi) = 1.811; ∠HCZr = 92.9, r(H?Zr) = 2.299, r(CZr) = 1.955; ∠HCHf = 95.6, r(H?Hf) = 2.352, r(CHf) = 1.967. As far as the MH₂ symmetric and asymmetric stretching and CH₂ wagging frequencies are concerned, the IEF-PCM calculated values are in better agreement with the experimental argon matrix ones than those calculated based on a gas phase model.     

Effects of dipole interaction and solvation on the CO stretching band of N,N-dimethylacetamide in nonpolar solutions: Infrared, isotropic and anisotropic Raman measurements

The concentration dependence of the CO stretching (ν_CO) band of N,N-dimethylacetamide (NdMA) in cyclohexane, n-hexane, and CCl₄ has been investigated by infrared (IR) and polarized Raman spectroscopy. For the neat liquid of NdMA, the noncoincidence of the aniso- and isotropic Raman wavenumbers is evident. In the 0.47 M cyclohexane solution of NdMA, the noncoincidence effect almost disappears and the ν_CO envelopes in both the Raman and IR spectra are asymmetric to the low-wavenumber side. When the concentration of NdMA decreases from 0.33 to 0.023 M, the peak of these bands slightly shifts to a higher wavenumber and the band shape becomes symmetric. The shape of the ν_CO envelope does not show any significant change below 0.023 M. These results suggest that the asymmetric shape of the ν_CO band observed for the 0.33 M cyclohexane solution is associated with the intermolecular interaction among NdMA molecules, which vanishes at around 0.02 M. Spectral changes for the CCl₄ solution of NdMA show a similar tendency. However, the shape and peak wavenumber of the ν_CO band observed in a highly diluted CCl₄ solution (≤0.023 M) indicate that the solvation effect of CCl₄ is more complicated than those of cyclohexane and n-hexane. The analyses of the ν_CO band, which is sensitive to the intermolecular interaction between solutes and between solute and solvent for NdMA dissolved in nonpolar solvents, would serve to clarify the electronic property of the molecule in a solution.     

The first evidence for a transient stibaallene ArSbCCR2

Dechlorofluorination of ArSb(F)-C(Cl)CR₂ (CR₂ = fluorenylidene, Ar = 2,4,6-tri-tert-butylphenyl) by tert-butyllithium afforded a 3,4-bis(fluorenylidene)-1,2-distibacyclobutane. The formation of the latter probably involves the transient stibaallene ArSbCCR₂ followed by a head-to-head dimerization via two SbC double bonds. Molecular orbital calculations at the ab initio and DFT levels support the head-to-head dimerization of ArSbCCR₂ with the formation of a 1,2-distibacyclobutane.     

DFT study on the unsaturated germylenoid H2CGeNaF

The unsaturated germylenoid H₂CGeNaF was studied by using the DFT B3LYP method in conjunction with the 6-311+G(d, p) basis set. Geometry optimization calculations indicate that H₂CGeNaF has three equilibrium configurations, in which the p-complex is the lowest in energy and is the most stable structure. Two transition states for isomerization reactions of H₂CGeNaF are located and the energy barriers are calculated. For the most stable one, vibrational frequencies and infrared intensities have been predicted.     

Further chemistry of ruthenium butatrienylidene complexes

Several complexes have been obtained from reactions carried out in early attempts to prepare the diynyl complexes Ru(CCCCR)(dppe)Cp* (R = H, SiMe₃). These have been identified crystallographically as the acyl complex Ru{CCC(O)Me}(dppe)Cp* (3), the cationic imido complex [Ru{CCC(NH₂)Me}(dppe)Cp*]PF₆ (4), the binuclear butenynylallenylidene [{Ru(dppe)Cp*}₂{μ-CCC(OMe)CHCMeCC}]PF₆ (5), and the bis(ethynyl)cyclobutenylidene [{Ru(dppe)Cp*}₂{μ-CCC₄H₂(SiMe₃)CC}]PF₆ (6). NMR studies of 5 have revealed the existence of two isomers. Plausible routes for their formation from the putative butatrienylidene intermediate [Ru(CCCCH₂)(dppe)Cp*]⁺ (A) are discussed.     

Quantification of the push-pull character of the isophorone chromophore as a measure of molecular hyperpolarizability for NLO applications

The push-pull character of a series of para-phenyl substituted isophorone chromophores has been quantified by the ¹³C chemical shift difference of the three conjugated partial CC double bonds and the quotient of the occupations of both the bonding and anti-bonding orbitals of these CC double bonds as well. The correlations of the two push-pull quantifying parameters, and to the corresponding bond lengths, strongly recommend /π_CC as the general parameter to estimate charge alternation and as a very useful indication of the molecular hyperpolarizabilities for NLO application of the compounds studied.     

Reactions of β-alkoxyvinyl trihalogenomethyl ketones with triethyl phosphite

The Perkow reaction of triethyl phosphite and β-alkoxyvinyl trihalogenomethyl ketones, which have common acyclic or cyclic structural fragment: -O-CC-C(O)CX₂Cl, yielded dienyl phosphates: -O-CC-C[OP(O)(OEt)₂]CX₂ where X = F or Cl, whereas γ-bromo-β-methoxy-α,β-unsaturated trifluoromethyl ketone CF₃C(O)CHC(OMe)CH₂Br gave diene CF₃C[OP(O)(OEt)₂]CH-C(OMe)CH₂.     

Oxidatively induced reactions of a diimine platinum(IV) tetramethyl complex

The oxidation of the Pt(IV) tetramethyl complex [ArNCHCHNAr]PtMe₄ (Ar = 2,6-Me₂C₆H₃) has been investigated in acetonitrile and dichloromethane. Cyclic voltammetry demonstrates that the irreversible oxidation of [ArNCHCHNAr]PtMe₄ occurs at a slightly less positive oxidation potential than the irreversible oxidation of the analogous Pt(II) species [ArNCHCHNAr]PtMe₂. The product distribution arising from the oxidation depends strongly on the reaction conditions and includes cationic Pt(IV) species (acetonitrile, dichloromethane solvents) and Pt(II) species (dichloromethane only). Evidence is presented that suggests that homolytic cleavage of a weakened PtC bond in is involved in the oxidatively induced reactions.     

A ruthenium(II) allenylidene complex with a 4,5-diazafluorene functional group: A new building-block for organometallic molecular assemblies

The synthesis of the new ruthenium(II) allenylidene complex [ClRu(dppe)₂CCC₁₁H₆N₂][OTf] (4) (dppe = 1,2-bis(diphenylphosphino)ethane) terminated with a 4,5-diazafluorene ligand is reported. Further coordination of that metal allenylidene to ruthenium and rhenium moieties leads to the bimetallic adducts [ClRu(dppe)₂CCC₁₁H₆N₂{Ru(bpy)₂}][B(C₆F₅)₄]₃ (5a), [ClRu(dppe)₂CCC₁₁H₆N₂{Ru(^tBu-bpy)₂}][PF₆]₃ (5b) and [ClRu(dppe)₂CCC₁₁H₆N₂{Re(CO)₃Cl}][OTf] (6). Their optical and electrochemical properties show that the allenylidene moiety is an attractive molecular clip for the access to larger original redox-active homo/heteronuclear multi-component supramolecular assemblies. The X-ray crystal structure of the allenylidene metal building block is also described.     

Ferrole-type compounds containing thiophenic or thiepinic rings in the 3,4-positions of the metallacycle

The new ferrole Fe₂(CO)₆[μ-η²,η⁴-(Fc)CC{C(H)C(R)S}CC(SiMe₃)] [R = SiMe₃ (1) and R = Fc (2)] and ruthenoles Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(H)}CC(Fc)] 3 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC(SCCFc)C(H)C(Fc)] 4, have been obtained from the reactions of M₃(CO)₁₂ (M = Fe, Ru) and FcCCSCCSiMe₃ through S-C bond activations and C-C coupling reactions. Thermolysis of Ru₂(CO)₆[μ₃-η²,η⁴,η³-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃}Ru(CO)₃}CC(Fc)] alone and in the presence of HCCFc, yielded the compounds Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)}CC(Fc)] 5 and Ru₂(CO)₆[μ-η²,η⁴-(Me₃Si)CC{SC(Fc)C(SCCSiMe₃)C(H)C(Fc)}CC(Fc)] 6, respectively. The crystal structures of the compounds 1, 3, 4 and 6 are reported.     

Nickel alkynyl and allenylidene complexes: Synthesis and properties

Copper-catalyzed reaction of [Cp(PPh₃)NiCl] with the terminal alkynes H-CC-C(O)R (R = O-Menthyl, NMe₂, Ph) yields the alkynyl complexes [Cp(PPh₃)Ni-CC-C(O)R]. Subsequent O-methylation with either [Me₃O]BF₄ or MeSO₃CF₃ affords cationic allenylidene complexes, [Cp(PPh₃)NiCCC(OMe)R]⁺X¯ (X = BF₄, SO₃CF₃). N-Alkylation of Cp(PPh₃)Ni-pyridylethynyl complexes likewise gives cationic allenylidene complexes. [Cp(PPh₃)Ni-CC-C(CH)₄N] adds BF₃ at nitrogen. Modification of the ligand sphere in these nickel allenylidene complexes is possible by replacing PPh₃ by PMe₃ in the alkynyl complex precursors. The first allenylidene(carbene)nickel cation, [Cp(SIMes)NCCC(OMe)NMe₂]⁺, is accessible by successive reaction of [Cp(SIMes)NiCl] with H-CC-C(O)NMe₂ and [Me₃O]BF₄. By the analogous sequence an allenylidene complex containing the chelating (diphenylphosphanyl)ethylcyclopentadienyl ligand can be prepared. DFT Calculations were carried out on the allenylidene complex cation [Cp(PPh₃)NiCCC(OMe)NMe₂]⁺ and on its precursor, the alkynyl complex [Cp(PPh₃)Ni-CC-C(O)NMe₂]. Based on the spectroscopic data and a X-ray structure analysis the bonding in the new nickel allenylidene complexes is best represented by several resonance forms, an alkynyl resonance form considerably contributing to the overall bond.     

Functionalized fluoroalkyl and alkenyl silanes: Preparations, reactions, and synthetic applications

Preparations, reactions, and synthetic applications of functionalized fluoroalkyl and alkenyl silanes have been summarized. This review focuses mainly on the chemistries of (1) 1-substituted difluoromethylsilanes (XCF₂SiR₃), (2) 1-substituted 2,2-difluorovinylsilanes (CF₂CXSiR₃), (3) trifluoroisopropenyl, trifluoroacetimidoyl, and trifluoroacetyl silanes [CF₃C(SiR₃)X, XCH₂, NAr, O] and (4) other fluorinated alicyclic silanes.     

Preparation of E-(1,2-difluoro-1,2-ethenediyl)bis(tributylstannane)

Chlorotrifluoroethene is converted in situ to [F₂CCFSiMe₃]. The crude [F₂CCFSiMe₃] solution is reduced with lithium aluminum hydride to (HFCCFSiMe₃), which (without isolation) is converted to (Z)-HFCCFSnBu₃. Subsequent metallation and trapping of the vinyllithium reagent with Bu₃SnCl gives (E)-Bu₃SnCFCFSnBu₃ in 73% overall yield. Only two isolation steps are required and the use of Me₃SiCl and F₂CCFCl provides a cheap, economical route to this useful synthon.     

Bis(amino)allenylidene complexes by displacement of the MeO group in methoxy allenylidene complexes of chromium and tungsten. Synthesis, DFT calculations and solid-state structures of new bis(amino)allenylidene complexes

Pentacarbonyl dimethylamino(methoxy)allenylidene tungsten, [(CO)₅WCCC(OMe)NMe₂] (1b), reacts with one equivalent of primary amines, H₂NR, by selectively replacing the methoxy group to give dimethylamino(amino)allenylidene complexes, [(CO)₅WCCC(NHR)NMe₂]. When the amine is used in excess both terminal groups, OMe as well as NMe₂, are replaced by the primary amino group giving [(CO)₅WCCC(NHR)₂ ]. The NHR substituent in these complexes may be modified by deprotonation with LDA followed by alkylation. The replacement of the methoxy group in 1b by a secondary amino group, NR₂, can be achieved by a stepwise process. Addition of Li[NR₂] to the C_γ atom of 1b affords an alkynyl tungstate. Subsequent OMe⁻ elimination induced by TMS-Cl/SiO₂ yields the allenylidene complexes [(CO)₅WCCC(NR₂)NMe₂]. When bidentate diamines are used instead of monoamines both substituents, OMe and NMe₂, are replaced and allenylidene complexes are formed in which C_γ constitutes part of a 5-, 6-, or 7-membered heterocycle. The reaction of [(CO)₅CrCCC(OMe)NMe₂] (1a) with diethylene triamine affords an allenylidene complex with a heterocyclic endgroup carrying a dangling CH₂CH₂NH₂ substituent. All reactions follow a strict regioselective attack of the nucleophile at C_γ and proceed with good to excellent yields. The addition of N-H to the C_αC_β bond is not observed. By applying either one of these routes nearly any substitution pattern in bis(amino)allenylidene complex can be realized.     

Selective anodic fluorination of electrophilic alkenes

Anodic fluorination of some electrophilic alkenes (conjugated with electron-withdrawn groups), ethyl cinnamates, RC₆H₄CHCHCO₂Et (R = H, CH₃, CH₃O, F and CF₃), cinnamonitrile, C₆H₄CHCHCN, phenyl stryryl ketone, and t-butyl styryl ketone using ammonium fluorides as the fluorine source and supporting electrolyte, in CH₂Cl₂ as electrolytic solvent yields the expected vicinal difluoro compounds, as mixture of erythro and threo isomers. The anodic fluorination of phenyl 3,5-di-t-butyl-4-hydroxystyryl ketone yields two monofluoro compounds. A possible reaction mechanism is discussed.     

N-Perfluoroalkylsulfonylimido derivatives of arenecarboxylic acid amides and their oxidative aza Hofmann rearrangement

The analogues of carboxamides in which the sp²-hybridized oxygen atom is replaced by more electron-withdrawing groups, NSO₂CF₃ and NSO₂C₄F₉, have been synthesized. The resulting N-perfluoroalkylsulfonyl arenecarboxamidines ArC(NSO₂R_f)NH₂ (R_f = CF₃, C₄F₉) undergo an oxidative Hofmann-type rearrangement to the corresponding carbodiimides ArNCNSO₂R_f under the action of (diacyloxyiodo)arenes. Rearrangement of related compounds ArC(NSO₂R)NH₂ (R = CH₃, Ph) containing fluorine-free substituents at the sulfonyl group also occurs in similar conditions. It was found that the reactivity of amidines rises with the increasing electron-withdrawing ability of the substituent R.     

Formation of a cyclobutenylidene by cyclo-addition of an alkynyl-ruthenium complex to a cyano(alkynyl)ethene

In contrast to the usual formal [2+2]-cycloaddition reaction, (NC)₂CC{CC(SiPrⁱ₃)}₂, containing bulky alkynyl substituents, reacts with Ru(CCPh)(PPh₃)₂Cp to give the unprecedented cyclobutenylidene complex Ru{C(CN)₂C[CC(SiPrⁱ₃)]CC(SiPrⁱ₃)CPhC}(PPh₃)Cp, formed by addition of one of the CC(SiPrⁱ₃) groups to the Ru-CCPh moiety and subsequent electronic reorganisation.     

Solvent and phosphine dependency in the reaction of cis-RuCl2(P-P)2 (P-P = dppm or dppe) with terminal alkynes

Reaction of cis-[RuCl₂(dppm)₂] (dppm = 1,2-bis(diphenylphosphino)methane) with PhCCH and NaPF₆ utilising methanol as solvent results in the formation of the η³-butenynyl complex [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] in good yield. Similar reactions with Bu^tCCH and PrⁿCCH resulted in the corresponding alkyl-substituted complexes and all three of these compounds have been characterised by NMR spectroscopy and X-ray crystallography. The mechanism of this reaction has been probed by employing labelling experiments with both PhCCD and PhC¹³CH allowing the identity of possible intermediates in the reaction to be determined. Furthermore, [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] has been shown to be an effective regio- and stereo-selective catalyst for the dimerisation of PhCCH to Z-PhCCCHCHPh in the absence of solvent. In contrast, no evidence for the formation of alkyne coupling was obtained from the reaction of cis-[RuCl₂(dppe)₂] (dppe = 1,2-bis(diphenylphosphino)ethane) with PhCCH and NaPF₆.     

From alkenylphosphane aminoallenylidene ruthenium(II) complexes to highly unsaturated ruthenaphosphabicycloheptene complexes

The alkenylaminoallenylidene complex [Ru(η⁵-C₉H₇){CCC(NEt₂)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (2) has been prepared by the reaction of the allenylidene [Ru(η⁵-C₉H₇)(CCCPh₂){κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (1) with the ynamine MeCCNEt₂. The reaction proceeds regio- and stereoselectively, and the insertion of the ynamine takes place exclusively at the C_βC_γ bond of the unsaturated chain. The secondary allenylidene [Ru(η⁵-C₉H₇){CCC(H)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (3) is obtained, in a one-pot synthesis, from the reaction of aminoallenylidene 2 with LiBHEt₃ and subsequent treatment with silica. Moreover, the addition of an excess of NaBH₄ to a solution of the complex 2 in THF at room temperature gives exclusively the alkynyl complex [Ru(η⁵-C₉H₇){CCCH₂[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)] (5). The heating of a solution of allenylidene derivative 3 in THF at reflux gives regio- and diastereoselectively the cyclobutylidene complex [Ru(η⁵-C₉H₇) (PPh₃)][PF₆](4) through an intramolecular cycloaddition of the CC allyl and the C_αC_β bonds in the allenylidene complex 3. The structure of complex 4 has been determined by single crystal X-ray diffraction analysis.