稳态和动态荧光研究疏水缔合共聚物P(AM/POEA)的自缔合行为和聚集体

应用稳态和动态荧光光谱方法,包括荧光探针、标记荧光和荧光淬灭等研究了共聚物P(AM/POEA)在水溶液中的自缔合性质.这种共聚物由丙烯酰胺(AM)和少量疏水单体2-苯氧乙基丙烯酸酯(POEA)组成.实验结果表明这类共聚物的自缔合行为和聚集体结构主要取决于聚合物的链结构和浓度.由胶束共聚合方法得到具有多嵌段结构的共聚物,它们容易发生疏水缔合,并产生很强的增粘作用,而由普通共聚合方法得到的无规共聚物却没有这些性质.同时这类聚合物的缔合类型及其增粘能力也直接与共聚物中的疏水体含量相关,随疏水体含量增加,由于分子间和分子内缔合的竞争,出现粘度先增后降的现象.在荧光研究的基础上提出了多分子聚合物聚集体的结构模型,它随聚集体浓度增加,进一步形成多联聚集体和网状结构.同时还观察到聚集体中疏水体有序排列现象.     

疏水缔合聚合物重均分子量的测定

采用毛细管法和荧光探针法研究了疏水缔合聚合物在不同甲酰胺浓度和盐浓度的溶剂中的特性黏数和疏水缔合作用强度.找到可以消除缔合作用和聚电解质效应的溶剂条件,用静态光散射法测定疏水缔合聚合物的重均分子量.结果表明,NaCl能够有效的屏蔽聚电解质效应,但是不能消除缔合作用,而且由于NaCl增加了溶液的极性,会进一步促进疏水缔合作用,疏水缔合聚合物以聚集体形态存在溶液中,因此,在NaCl溶剂中测得的疏水缔合聚合物的重均分子量不是真实分子量;而甲酰胺可以完全破坏疏水缔合作用,使聚合物分子以单分子态分散在溶液中,进而测得疏水缔合聚合物的真实分子量.当溶剂中的NaCl浓度为0.2 mol/L、甲酰胺体积分数为50%时,可准确测定疏水缔合聚合物的重均分子量.当缔合作用消除后再改变甲酰胺浓度,测得的重均分子量不再变化;聚电解质效应消除后,盐离子浓度的变化不会再改变测得的重均分子量结果.     

疏水缔合(丙烯酰胺十六烷基二甲基烯丙基氯化铵-2-丙烯酰胺基-2-甲基丙磺酸)三元共聚物的合成与性能研究

疏水缔合水溶性聚合物是指在聚合物亲水性大分子链上引入少量疏水基团的一类水溶性聚合物[1～5].在水溶液中,疏水基团之间由于憎水作用而发生聚集,使大分子链产生分子内与分子之间缔合.在临界缔合浓度以上,以分子间缔合为主,增大了流体力学体积,因此,具有较好的增粘作用.疏水基的加入可大幅度地改变聚合物的流变性能.在聚合物驱油中的流度控制,提高波及效率、以及调剖中起到非常重要的作用.     

疏水缔合聚合物稳定乳状液的研究*

本文综述了近年来疏水缔合聚合物稳定乳状液的研究进展。论述了疏水缔合聚合物水溶液的性质,由于其较复杂的分子结构以及其分子主链上疏水基团的缔合作用,使其水溶液增稠的能力比小分子表面活性剂的增稠能力强的多。另外,对疏水缔合聚合物单独稳定乳状液的研究现状进行了介绍,其稳定乳状液的机理与小分子表面活性剂不同。同时讨论了疏水缔合聚合物与表面活性剂的相互作用,此类聚合物可与小分子表面活性剂通过静电和疏水缔合发生强烈的相互作用形成复合体系,并评述了其复配体系稳定乳状液的情况。最后总结了疏水缔合聚合物稳定乳状液的机理。     

聚(丙烯酰胺-丙烯酸高级酯)的溶液性质研究

采用沉淀聚合法分别合成了丙烯酰胺与丙烯酸十四酯、丙烯酸十六酯、丙烯酸十八酯一系列疏水缔合型共聚物。对共聚物溶液性质及疏水基团浓度、电解质浓度、温度等因素对共聚物溶液性能的影响进行了研究,结果表明这类疏水缔合型聚合物表观出较好的耐温、耐盐等性能。     

疏水缔合聚丙烯酰胺的合成及溶液性能研究

水溶性疏水缔合聚合物是在聚合物亲水主链上引入极少量疏水基团(一般小于2ｍｏｌ%)而形成的一种新型水溶性聚合物[1]。由于这类聚合物具有独特的流变性能,因而备受学术界和工业界关注。目前已作为涂料增稠剂[2]和流变改性剂[3]得到了应用,而通过在部分水解聚丙烯酰胺(ＨＰＡＭ)的亲水主链上引入少量疏水单体而形成的疏水缔合聚丙烯酰胺(ＨＡＰＡＭ)则可望克服ＨＰＡＭ耐温、耐盐性差的缺陷[4]而作为新一代水溶性聚合物材料用于油气开采作业[5,6]。由于亲水单体和疏水单体的不相容性,通常通过在反应溶液中加入表面活性剂使亲水单体和疏水单体…     

新型疏水缔合聚合物P(AM/POEA)与表面活性剂的相互作用

采用粘度法、荧光探针和透射电镜研究了新型疏水缔合聚合物P(AM/POEA)和表面活性剂SDS和CTAB在水溶液中的相互作用. 聚合物P(AM/POEA)结构中, 疏水体(2-苯氧乙基丙烯酸酯)呈嵌段状无序地分布在聚丙烯酰胺主链上. 这类聚合物很容易和表面活性剂相互作用, 通过疏水缔合, 形成混合胶束状聚集体, 导致溶液粘度剧增. 随聚合物溶液中SDS的加入, 溶液粘度发生大幅度起伏变化, 出现最大值. 粘度最大值对应的表面活性剂浓度c_S,max位于表面活性剂CMC附近, 并发现它的位置不随聚合物微结构而变化. 然而它们缔合作用的增粘程度却与聚合物疏水体含量X_H及疏水嵌段尺寸N_H有关. 在实验浓度范围内, X_H和N_H愈大, 溶液的粘度越高. 此外用透射电镜直接观察到聚合物/表面活性剂体系中聚集体的交联结构形貌.     

疏水缔合聚合物在石英砂表面的吸附——疏水基含量和微嵌段长度对吸附的影响

研究了不同分子结构的疏水缔合聚合物和部分水解聚丙烯酰胺在45、55和65 ℃下的静态吸附特征。 实验结果表明,疏水缔合聚合物的疏水基含量和微嵌段长度可以改变聚合物在石英砂表面的最大吸附量,而其中疏水基含量是主要影响因素,等温吸附曲线出现2个平台区。 随着温度的升高, 部分水解聚丙烯酰胺吸附量增大,而缔合聚合物则表现出相反的规律;缔合聚合物通过改变疏水基含量和微嵌段长度来影响其吸附性能。     

NaCl对疏水缔合聚合物溶液性质的影响研究

研究了NaCl对疏水缔合聚合物溶液性质的影响。结果表明,所合成的疏水缔合聚合物的特性粘数随NaCl浓度的增加而降低,其表观粘度则先降低后增加,继续增加NaCl浓度,溶液粘度降低,但仍保持很高的粘度。环境扫描电镜(ESEM)研究表明,疏水缔合聚合物在去离子水体系中会形成网状结构,而在NaCl浓度为5g·L-1的溶液中,ESEM照片显示疏水缔合聚合物的结构为致密的树枝状结构,且存在一临界缔合浓度。     

两亲性树枝形聚合物微反应器在光化学反应中应用研究

树枝形聚合物是一种结构独特的大分子,其内部存在的空腔可以容纳底物分子,近年来作为一类新型的微反应器引起广泛重视.在这些研究中,具有亲水外围基团和疏水内层骨架的两亲性树枝形聚合物因其溶解于水可以提供类似胶束的限制性微环境而备受关注,这种树枝形聚合物也被称为"静态单分子胶束".疏水小分子包裹在这类树枝形聚合物内部空腔溶解在水溶液中,由于树枝形聚合物内部微环境的影响,这些有机小分子表现出与其在均相水溶液或其它介质中不同的光物理和光化学性质.     

Aggregation behaviour of hydrophobically modified poly(allylammonium) chloride

 The behaviour of hydrophobically modified poly(allylammonium) chloride having octyl, decyl, dodecyl and hexadecyl side chains has been studied in aqueous solution using fluorescence emission techniques. Micropolarity studies using the I ₁/I ₃ ratio of the vibronic bands of pyrene show that the formation of hydrophobic microdomains depends on both the length of the side chain and the polymer concentration. The I ₁/I ₃ ratio of the polymers with low hydrophobe content (less than 5% mol) changes substantially when reaching a certain concentration. These changes are assigned to aggregation originating from interchain interactions. This behaviour is also confirmed by the behaviour of the monomer/excimer emission intensities of pyrenedodecanoic acid used as a probe. For polymers having dodecyl side chains and hydrophobe contents higher than 10%, aggregates are formed independently of the polymer concentration. Anisotropy measurements show that microdomains resulting from the inter- and/or intramolecular interactions are similar to those observed for cationic surfactants. Viscosity measurements show that the coil dimensions are substantially decreased for the polymers having high hydrophobe contents, indicating intramolecular associations. Received: 10 November 1999/Accepted: 7 April 2000     

Influence of hydrophobe content and salt concentration on dilute solution behaviour of hydrophobically modified ionic polymers from diallylammonium salts/sulfur dioxide cyclocopolymerization: Light scattering and fluorescence spectroscopy

Novel hydrophobically modified polyelectrolytes were synthesized using the cyclocopolymerization of sulfur dioxide, N,N-diallyl-N-carboethoxymethylammonium chloride and the hydrophobic monomer N,N-diallyl-N-octadecylammonium chloride. Aggregation of these polymers in aqueous solutions was characterized in the dilute regime by static light scattering and fluorescence spectroscopy as a function of hydrophobe content and NaCl concentration. Copolymers were observed to associate at very low concentrations (0.005 wt%). The copolymer is capable of associating at this very low polymer concentration because of the extended length of the hydrophobic monomer (C₁₈) that can reach far enough from the backbone to avoid electrostatic repulsion. Aggregation of the polymers increased with increasing hydrophobe content. Upon addition of salt, the apparent molecular weight of polymer aggregates decreased as a result of neutralization of the charges. At high salt concentrations, the size of the polymer aggregates was observed to increase again as a result of increased polarity of the solvent that resulted in more hydrophobic association.     

Effect of hydrophobically modified polymers on shear-induced multilamellar vesicles

The effects of polymer concentration, polymer molecular weight, and hydrophobe substitution level of modified poly(acrylic acid) polymers on the formation, size, and viscoelastic properties of shear-induced multilamellar vesicles (onions) are studied by rheology and light diffraction. The onions are close-packed, space-filling vesicles formed by shearing aqueous lamellar phases of C12E5 surfactant to produce phases with sufficient order and size uniformity (O(1-3 microm)) to diffract light. The addition of hydrophobically modified polymers enhances the rate of formation, uniformity, and stability independent of hydrophobe substitution level. Onion size decreases with increasing shear rate as observed for pure surfactant onion systems, but the shear-rate dependence is changed by the polymer. The onion phase has a plateau modulus that increases with polymer concentration but is independent of hydrophobe substitution level or molecular weight. The model presented by Panizza et al. that relates the plateau modulus of the onion phase to membrane rigidity and the compression modulus is consistent with independent measurements of membrane properties from SANS.     

Highly branched stimuli responsive poly[(N-isopropyl acrylamide)-co-(1,2-propandiol-3-methacrylate)]s with protein binding functionality

Highly branched poly(NIPAM) have been prepared using the technique of reversible addition-fragmentation chain transfer (RAFT) polymerisation using a chain transfer agent that allows the incorporation of imidazole functionality in the polymer chain-ends. The lower critical solution temperature (LCST) of the polymers can be controlled by the amount of hydrophobe and GMA incorporated during copolymerisation procedures. These thermally responsive "smart" polymers were used to purify a His-tagged BRCA-1 protein fragment by affinity precipitation. [Diagram: see text]     

Preparation and (13C)NMR spectroscopy of stereoregular poly(methacrylic acid)

Several procedures for synthesis of stereoregular poly(methacrylic acid) have been examined and the polymer characterized by (¹³C)NMR. Using d⁶ DMSO as solvent for spectroscopy gives better spectra than those previously obtained using aqueous solutions and stereochemical splittings can be resolved in the methyl signals. Free-radical polymerization in toluene solution is a Bernouilli process giving mainly heterotactic/syndiotactic polymer. Polymers produced with free-radical initiation in aqueous solution have a higher, and pH dependent, content of syndiotactic triads. A previously described procedure for producing regular polymers by hydrolysis of poly(trimethylsilyl methacrylate) requires modification to produce isotactic contents of above 90% and does not give truly syndiotactic polymer. In contrast, polymerization with γ-radiation can produce polymers with close to 90% of syndiotactic triads.     

Phase separation in aqueous mixtures of hydrophobically modified cellulose derivatives with their nonmodified analogues

Mixtures of hydrophobically graft-modified cellulose derivatives and their nonmodified analogues have been studied in aqueous solution. A qualitatively similar behavior was found in the phase behavior of nonionic as well as of cationic polymer systems. Over a large range of total polymer concentrations and mixture ratios the solutions phase separated into two phases of similar polymer concentration, with one of the phases enriched in the hydrophobically modified polymer. From the manufacturing process the cellulose derivatives investigated are likely to contain polymer chains with a rather continuous distribution in degrees of substitution and, possibly, substitution patterns. This causes a complex phase behavior that cannot be adequately described by a ternary representation. The multicomponent nature became apparent from composition analyses of the phases in equilibrium. It may thus be more appropriate to view the phase separation as a fractionation. A phase of small relative volume with a highly enhanced hydrophobe content (compared to the original hydrophobically modified polymer sample) was created. This was particularly obvious in more dilute solutions. Sometimes the phase separation was difficult to observe because the phases in equilibrium had similar polymer concentrations and, therefore, similar refractive indices. The observations presented here call for the attention of producers and users of these types of polymers. Received: 6 July 2000 Accepted: 6 September 2000     

含辣素衍生结构疏水缔合聚合物PAAH的合成、表征及溶液性质

以辣素功能结构单体N-（4-羟基-3-甲氧基-苄基）-丙烯酰胺（HMBA）为疏水单体,与丙烯酰胺（AM）和2-丙烯酰胺基-2-甲基丙磺酸钠（NaAMPS）通过自由基胶束共聚,制得三元疏水缔合聚合物P（AM-NaAMPS-HMBA）（简称PAAH）. 采用紫外-可见光谱、核磁共振氢谱、热重分析及扫描电子显微镜对共聚物的结构及形貌进行表征,利用原子力显微镜对聚合物水溶液的微观形貌进行观察,并对其溶解性、疏水缔合性、耐温性及抑菌性能进行了研究. 结果表明,所得共聚物中疏水单体含量与投料比基本一致;PAAH具有良好的速溶性,当聚合物浓度超过一定值后,溶液黏度急剧增加,且随着疏水单体含量增加,疏水缔合性能增强;原子力显微镜观察证实了聚合物水溶液中网络结构的存在. 与未改性的P（AM-NaAMPS）（简称PAA）共聚物相比,引入具有生物活性且带有刚性苯环结构的HMBA单体可使PAAH共聚物热稳定性增强,耐温性能提高,并赋予其优良的抑菌性能.     

Physicochemical and Rheological Properties of Novel Magnesium Salt-Polyacrylamide Composite Polymers

Two series of novel inorganic-organic composite polymers have been prepared through physical blending of magnesium chloride and magnesium hydroxide respectively with polyacrylamide aqueous solution. The physicochemical properties of the magnesium salt-polyacrylamide composite polymers were tuned by varying the ratio between the magnesium salt (e.g., magnesium chloride and magnesium hydroxide) and polyacrylamide. Characterizations of magnesium salt-polyacrylamide composite polymers were carried out via FTIR and TEM. Parameters such as solution conductivity and viscosity were also taken into account to characterize the physicochemical properties of the composite polymer aqueous solutions. Magnesium chloride-polyacrylamide (MCPAM) composite polymer aqueous solutions have a higher conductivity compared to magnesium hydroxide-polyacrylamide (MHPAM) composite polymer aqueous solutions. The viscosities of the MHPAM composite polymer aqueous solutions were found higher than MCPAM composite polymer aqueous solutions. The rheological properties of the composite polymer aqueous solutions were investigated using steady-state flow and oscillatory frequency sweep within the linear viscoelastic region. Shear-thinning effect was observed for both composite polymer systems when the shear rate increases. In oscillatory frequency sweep tests, both composite polymer systems show that the viscoelastic behaviors depend strongly on the magnesium salt concentrations. Viscous behavior was found to be dominant for both composite polymer systems.     

水溶性β-环糊精聚合物和疏水改性聚丙烯酰胺的主客体相互作用

主体环糊精聚合物(β-CDE)与客体疏水改性丙烯酰胺共聚物P(AM/POEA)构成超分子结构的高分子识别体系. 这种客体聚合物是含有少量疏水体(x_POEA＜0.01)的水溶性聚合物, NMR测定结果表明β-CDE和P(AM/POEA)的主客体相互作用是通过环糊精空腔和疏水体POEA形成包结络合物进行的. 在P(AM/POEA)聚合物水溶液中加入β-CDE, 由于主客体聚合物相互作用出现粘度的大幅上升, 增粘的幅度可通过改变聚合物浓度和疏水体含量来调节, 同时对盐浓度和温度的影响也进行了研究. 通过透射电镜直观观察的结果表明, 此类缔合聚合物体系的主客体相互作用生成实心球状多分子聚集体.