Synthesis and applications of shell cross-linked thermoresponsive hybrid micelles based on poly(N-isopropylacrylamide-co-3-(trimethoxysilyl)propyl methacrylate)-b-poly(methyl methacrylate)

Shell cross-linked (SCL) thermoresponsive hybrid micelles consisting of a cross-linked thermoresponsive hybrid hydrophilic shell and a hydrophobic core domain were synthesized from poly(N-isopropylacrylamide-co-3- (trimethoxysilyl)propyl methacrylate)-b-polymethyl methacrylate (P(NIPAAm-co-MPMA)-b-PMMA) amphiphilic block copolymers. Transmission electron microscopy (TEM) images showed that the SCL micelles formed regularly globular nanoparticles. The SCL micelles showed reversible dispersion/aggregation in response to temperature cycles through an outer polymer shell lower critical solution temperature (LCST) for PNIPAAm at around 33 degrees C, observed by turbidity measurements and dynamic light scattering (DLS). The drug loading and in vitro drug release properties of the SCL micelles bearing a silica-reinforced PNIPAAm shell were further studied, which showed that the SCL micelles exhibited a much improved entrapment efficiency (EE) as well as a slower release rate which allowed the entrapped molecules to be slowly released over a much longer period of time as compared with pure PNIPAAm-b-PMMA micelles.     

Micelle-encapsulated carbon nanotubes: a route to nanotube composites

We report a general approach toward dispersing single-walled carbon nanotubes (SWNTs) in solvents and polymer materials, by encapsulating SWNTs within cross-linked micelles. Micelles made from polystyrene-block-poly(acrylic acid) (PS-b-PAA), an amphiphilic block copolymer, are first assembled around SWNTs by gradually adding H2O to a suspension of nanotubes in dimethylformamide. The hydrophilic, outer shells of these micelles are then chemically cross-linked with a difunctional linker molecule. Pure encapsulated SWNTs (e-SWNTs) can then be separated from empty cross-linked micelles by consecutive cycles of centrifugation and redispersion. Atomic force and transmission electron microscopies of the resulting nanostructures demonstrate that individual nanotubes (rather than bundles) have been completely encased in polymer shells whose thickness is slightly larger than that of empty micelles. e-SWNTs encapsulated in PS-b-PAA can be permanently redispersed in H2O, in organic solvents, and in both hydrophobic and hydrophilic polymer matrices with minimal sonication. Micelle encapsulation could improve the compositing of SWNTs in a wide variety of polymer materials for structural, electronic, and thermal applications.     

Synthesis and characterization of cross-linked reverse micelles

The design and synthesis of a new cross-linkable amphiphile is reported. Solutions of the amphiphile in a toluene/water mixture form reverse micelles as indicated by dynamic light scattering and NMR spectroscopy. As indicated by dynamic light scattering, TEM, and NMR spectroscopy data, these reverse micelles can be cross-linked without drastically changing the radius of the reverse micelles. Mixed reverse micelles are also characterized and cross-linked. The cross-linked reverse micelles are demonstrated to facilitate phase transfer and can be used to site isolate a catalyst.     

Interaction of nonionic surfactants with copolymer microgel particles of NIPAM and acrylic acid

Binding of the nonionic surfactants Triton X-100 and Triton X-405 onto linear copolymers of N-isopropylacrylamide (NIPAM) and acrylic acid and to cross-linked microgel particles of similar composition but differing in their cross-link densities has been studied. The binding capacities vary for each of these polymeric systems, being smallest for the linear copolymer. The binding is also significantly less in all cases for the more hydrophilic surfactant, namely, Triton X-405. By comparing estimates of the pore or "cage" size within the microgel particles with the dimensions of the free micelles in solution, it is concluded that micelles of Triton X-100 form within the microgel particles more readily for the lower cross-linked microgel particles. However, micelles do not form as easily inside either microgel for Triton X-405. The swelling/deswelling behavior of each of the two microgels, in the presence of the surfactants, has been explained in terms of their relative binding behavior and how this contributes to the osmotic pressure difference inside and outside the microgel particles and also in terms of micelle "bridging" of the polymer network, causing shrinkage.     

核交联的含磺酸甜菜碱pH敏感胶束的制备与表征

制备了一种在疏水段带有侧基叠氮官能团的两亲性pH敏感的聚合物——聚己内酯-聚(甲基丙烯酸二乙氨基乙酯-磺酸甜菜碱)((PCL-ACL)-PDEAS);同时合成了两端带有炔基中间带有二硫键的交联剂,用红外、核磁表征了目标分子.通过两亲性高分子自组装形成胶束,并通过点击化学反应获得了核交联的胶束.通过动态光散射测定粒径,胶束酸碱滴定表征胶束的pH敏感性,还原条件下释放药物的速度,对比了非交联胶束和交联胶束的性质.结果表明,交联胶束在正常生理条件下的释放速度比未交联胶束更慢;而在有DTT的存在条件下,交联胶束由于二硫键断裂,释放速率明显加快.因此,核交联载药胶束有可能响应肿瘤的微环境实现靶向释放.     

Thermosensitive pluronic micelles stabilized by shell cross-linking with gold nanoparticles

Gold nanoparticles were employed to prepare shell cross-linked Pluronic micelles that exhibit a reversibly thermosensitive swelling/shrinking behavior. Two terminal hydroxyl groups of Pluronic F127 were thiol-functionalized to form self-assembling Pluronic micelles in aqueous solution with exposed -SH groups in an outer shell layer. The thiol groups present in the outer shell were cross-linked by gold nanoparticles synthesized through NaBH4 reduction of gold precursor anions. The resultant shell cross-linked gold-Pluronic micelles exhibited a temperature-dependent volume transition: their hydrodynamic diameter was changed from 157.1 +/- 15.6 nm at 15 degrees C to 53.4 +/- 5.5 nm at 37 degrees C as determined by dynamic light scattering. The critical micelle temperature measured by a pyrene solubilization technique suggested that the reversible swelling/shrinking behavior of the micelles was caused by hydrophobic interactions of cross-linked or grafted Pluronic copolymer chains in the micelle structure with increasing temperature. Transmission electron microscopy directly revealed that the shell cross-linked micelles were indeed produced by gold nanoparticles covalently clustered on the surface. These novel self-assembled organic/inorganic hybrid micelles would hold great potential for diagnostic and therapeutic applications.     

Template synthesis of subnanometer gold clusters in interfacially cross-linked reverse micelles mediated by confined counterions

A cationic surfactant with a triallylammonium headgroup was cross-linked photochemically in the presence of a hydrophilic dithiol in the reverse micelle (RM) configuration. The interfacially cross-linked reverse micelles (ICRMs) are unusual templates for nanomaterials synthesis. Our previous work indicated that the ICRMs could extract anionic metal salts such as tetracholoroaurate into the hydrophilic interior, and the entrapped aurate was reduced without externally added reducing agent to form subnanometer luminescent gold clusters [Zhang, S.; Zhao, Y. ACS Nano 2011, 5, 2637-2646]. In this work, the bromide counterions were established as the reducing agent in the template synthesis. The reduction of tetrachloroaurate was proposed to happen through ligand exchange on the aurate by the bromide ions, reductive elimination of halogen, and disproportionation of the Au(I) intermediate. The size of the gold clusters could be tuned rationally by the water-to-surfactant ratio (W(0)) and the reducing agent. Monodisperse Au(4) and Au(9-10) clusters as well as larger Au(18) and Au(23) clusters were obtained from the ICRM templates. The as-prepared, metastable gold clusters were subject to reconstruction triggered by ligand exchange on the surface but could be stabilized through proper surface protection using a chelating dithiol.     

The Physicochemical Behavior of Phytosterol Ethoxylates

In this work the physicochemical behavior of a series of phytosterol ethoxylates in water is presented. The influence of the length of the polyoxyethylene chain is studied. The surfactant solutions have been examined by means of birefringent microscopy, surface tension, self-diffusion 1H NMR, dynamic and static light scattering, and rheology. The surfactants with a hydrophilic chain of 10 oxyethylene units or more gave a micellar region. The CMC values were generally very low and a reverse relationship between the CMC value and the polyoxyethylene chain length was obtained. The time required to reach equilibrium surface tension was very long, more than 150 min. For the hydrophobic surfactants large lamellar regions appeared while for the more hydrophilic surfactants cubic and hexagonal structures were present which remained stable up to temperatures of 100 degrees C. In the micellar region prolate aggregates were formed which showed "ghostlike" behavior, consisting of cross-linked micelles with very fast relaxation times. Copyright 1999 Academic Press.     

Photosensitive cross-linked block copolymers with controllable release

We intend to form photosensitive block copolymer micelles for controllable release of encapsulated substances. Here, we designed and synthesized a new photocleavable cross-linker (2-nitrophenyl ethylene glycol dimethacrylate) for methyl methacrylate (MMA) atom transfer radical polymerization. Four different ratios (0:1, 1:26, 1:16, 1:8.8) of the photocleavable cross-linker to MMA monomer were used and four block copolymers (P0, P1, P2, P3) were synthesized with PEO-Br as the macroinitiator. Gel permeation chromatography and (1) H NMR studies showed that linear polymer molecules could be cross-linked by the photocleavable linker. The fluorescence studies of the encapsulated Nile Red (NR) showed that there were lower critical micelle concentrations for the polymer P1, P2 and P3 than polymer P0. And dynamic light scattering and SEM confirmed the formation of polymer micelles. Photolysis experiments demonstrated that NR encapsulated in the polymer micelles could be released upon UV irradiation (365 nm, 11 mW cm(-2)) due to the breakage of the photocleavable linker and the generation of more hydrophilic acid moieties, which destabilized polymer micelles. Our study shows a new strategy for the possibility of photocontrollable drug release for hydrophobic drugs.     

FORMATION OF FLOWER-LIKE AGGREGATES FROM SELF-ASSEMBLING OF MICELLES WITH PEO SHELLS AND CROSS-LINKED POLYACRYLAMIDE CORES

Amphiphilic block copolymers,poly(ethylene oxide)-b-poly(N-acryloxysuccinimide) (PEO-b-PNAS) with various molecular weights have been successfully synthesized by atom transfer radical polymerization (ATRP) of NAS using functionalized PEO (PEO-Br) as ATRP macroinitiator.The self-assembling of the block copolymers in water,which is a good solvent for PEO and a non-solvent for PNAS.yielded spherical core-shell micelles with PNAS as core and PEO as shell.The cross-linked reaction of oxysuccinimide in PNAS ch...     

Solvent-induced morphological transition in core-cross-linked block copolymer micelles

Microwave-assisted polymerization has been utilized to synthesize amphiphilic poly(2-ethyl-2-oxazoline-block-2-"soy alkyl"-2-oxazoline) diblock copolymers (PEtOx-PSoyOx). The amphiphilic block copolymers have been used to prepare aqueous spherical micelles consisting of a PEtOx corona and a PSoyOx core, which have been further cross-linked by UV irradiation. The morphology of these cross-linked micelles has been shown to reversibly change from spheres to short rods referred to as rice grains whenever the micelles were transferred from water into acetone, a nonselective solvent for the constituent blocks. This morphological transition has been attributed to the swelling of the slightly cross-linked PSoyOx core.     

Aggregation of amphiphilic polymers in the presence of adhesive small colloidal particles

The interaction of amphiphilic polymers with small colloids, capable to reversibly stick onto the chains, is studied. Adhesive small colloids in solution are able to dynamically bind two polymer segments. This association leads to topological changes in the polymer network configurations, such as looping and cross-linking, although the reversible adhesion permits the colloid to slide along the chain backbone. Previous analyses only consider static topologies in the chain network. We show that the sliding degree of freedom ensures the dominance of small loops, over other structures, giving rise to a new perspective in the analysis of the problem. The results are applied to the analysis of the equilibrium between colloidal particles and star polymers, as well as to block copolymer micelles. The results are relevant for the reversible adsorption of silica particles onto hydrophilic polymers, used in the process of formation of mesoporous materials of the type SBA or MCM, cross-linked cyclodextrin molecules threading on the polymers and forming the structures known as polyrotaxanes. Adhesion of colloids on the corona of the latter induce micellization and growth of larger micelles as the number of colloids increase, in agreement with experimental data.     

Reduction of protein adsorption to a solid surface by a coating composed of polymeric micelles with a glass-like core

Adsorption studies by optical reflectometry show that complex coacervate core micelles (C3Ms) composed of poly([4-(2-amino-ethylthio)-butylene] hydrochloride)(49)-block-poly(ethylene oxide)(212) and poly([4-(2-carboxy-ethylthio)-butylene] sodium salt)(47)-block-poly(ethylene oxide)(212) adsorb in equal amounts to both silica and cross-linked 1,2-polybutadiene (PB). The C3Ms have an almost glass-like core and atomic force microscopy of a dried layer of adsorbed C3Ms shows densely packed flattened spheres on silica, which very probably are adsorbed C3Ms. Experiments were performed with different types of surfaces, solvents, and proteins; bare silica and cross-linked 1,2-PB, NaNO(3) and phosphate buffer, and lysozyme, bovine serum albumin, beta-lactoglobulin, and fibrinogen. On the hydrophilic surface the coating reduces protein adsorption >90% in 0.1 M phosphate buffer, whereas the reduction on the coated hydrophobic surface is much lower. Reduction is better in phosphate buffer than in NaNO(3), except for the positively charged lysozyme, where the effect is reversed.     

Direct preparation of core cross-linked micelles in a nonselective solvent

This is the first light scattering study demonstrating that the size of micelles, the aggregation number, and the mobility of the core blocks of the micelles could be controlled by the length of the cross-linker in the micellar cores. The core cross-linked micelles were prepared using a poly[(4-pyridinemethoxy-methyl)styrene]-block-polystyrene (PPySt-b-PSt) diblock copolymer and perfluoroalkyl dicarboxylic acid. The PPySt-b-PSt copolymer formed the micelles in THF, a nonselective solvent, in the presence of the perfluoroalkyl dicarboxylic acid. The light scattering studies demonstrated that the micellar size and aggregation number were dependent on the chain length of the perfluoroalkyl dicarboxylic acid. Perfluoroazelaic acid produced micelles with a larger hydrodynamic radius and higher aggregation number than tetrafluorosuccinic acid. The micellization proceeded through the formation of the pyridinium carboxylate and the cross-linkage between the PPySt blocks via the dicarboxylic acid. The core cross-linked micelles were thermally stable and maintained its structure with changes in the temperature. A ¹H NMR analysis revealed that the micelles prepared by perfluoroazelaic acid had more mobility of the core blocks than those by tetrafluorosuccinic acid.     

无规共聚物自组装球形胶束表面亲水性的耗散粒子动力学模拟

建立了含不同亲疏水粒子比的双亲性无规共聚物粗粒化模型. 采用耗散粒子动力学方法模拟了两亲性无规共聚物选择性溶剂自组装球形胶束表面的亲水性能. 模拟结果表明, 无规共聚物在选择性溶剂中自组装得到实心球形胶束, 球形胶束表面的亲水性与聚合物链亲水粒子含量、溶剂的选择性有关. 随着聚合物链所含亲水粒子增加, 球形胶束表面的亲水性增强. 球形胶束表面的亲水性随着疏水粒子与溶剂粒子间的排斥参数增大而增强, 模拟结果与实验结论一致. 该模拟方法给出的胶束微结构信息可以为双亲无规共聚物分子设计及自组装双亲胶束制备提供一定的理论指导.     

Dandelion flower-like micelles

Dandelion flower-like micelles (DFMs) were prepared by self-assembly of polycaprolactone (PCL) functionalized surface cross-linked micelles (SCMs). Upon reductive stimuli, the SCMs can be released from the DFMs by non-Brownian motion at an average speed of 19.09 μm s⁻¹. Similar to the property of dandelion flowers dispersing their seeds over a long distance, the DFMs demonstrated enhanced multicellular tumor spheroid (MTS) penetration, a useful property in the treatment of many diseases including cancer, infection-of-biofilm diseases and ocular problems.

Dandelion flower-like micelles (DFMs) can release surface cross-linked micelles (SCMs) by non-Brownian motion at an average speed of 19.09 μm s⁻¹ upon reductive stimuli.     

Successful preferential formation of a novel macromolecular assembly--trilayered polymeric micelle--that can incorporate hydrophilic compounds: the optimization of factors affecting the micelle formation from amphiphilic block copolymers

We have developed a novel macromolecular assembly, trilayered polymeric micelle, which can incorporate hydrophilic compounds. The micelle can be prepared from the amphiphilic block copolymers without regard to their properties such as the copolymer's charges and the homogeneity of the copolymers forming the micelle's inner and outer parts. In this study, we investigated the optimal condition for the preferential formation of the trilayered polymeric micelle. GPC results clarified that the composition of the block copolymer, the concentration of PVA in the aqueous bulk phase, and the temperature during the preparation were the important preparation factors affecting preferential formation of the trilayered polymeric micelles. We successfully achieved the preferential formation of the trilayered polymeric micelles under optimal conditions. Furthermore, we confirmed that the model hydrophilic compound, FITC-dextran, was successfully encapsulated into the hydrophilic core of the trilayered polymeric micelles. The novel micelle that can incorporate hydrophilic compounds can have a variety of future medical applications such as a protein delivery-based therapy.     

Stimuli-responsive supramolecular nanocapsules from amphiphilic calixarene assembly

We synthesized tetrameric amphiphilic molecules based on a calixarene building block that self-assembles into a tunable and stable aggregation structure in aqueous solution. The amphiphilic calixarene molecules with a small hydrophilic part were observed to assemble into a vesicular structure that decreases significantly in diameter with only small increases in the hydrophilic chain length. Further increasing the chain length induced the collapse of the vesicles into spherical micelles. Remarkably, the vesicles were also observed to transform into small globular micelles at lower pH, which can be used to trigger the release of the encapsulated hydrophilic guest molecules.     

Thermoresponsive core cross-linked micelles for selective ratiometric fluorescent detection of Hg2+ ions

We report on the fabrication of core cross-linked (CCL) micelles possessing thermoresponsive cores and their application as sensitive and selective ratiometric Hg(2+) probes with thermo-tunable detection efficiency. Well-defined double hydrophilic block copolymer (DHBC) bearing naphthalimide-based Hg(2+)-reactive moieties (NUMA, 4), PEO-b-P(NIPAM-co-NAS-co-NUMA), was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization, where PEO, NIPAM, and NAS represent poly(ethylene oxide), N-isopropylacrylamide, and N-acryloxysuccinimide. At 25 °C, PEO-b-P(NIPAM-co-NAS-co-NUMA) unimers in aqueous solution can act as ratiometric Hg(2+) probes with a detection limit of ～10.1 nM. After core cross-linking of the micellar nanoparticles formed at elevated temperatures, structurally stable CCL micelles with well-solvated PEO coronas and thermoresponsive cores embedded with Hg(2+)-reactive NUMA moieties were obtained. Upon Hg(2+) addition, the aqueous dispersion of CCL micelles exhibit a colorimetric transition from yellowish to colorless and a fluorometric emission transition from green to bright blue. Moreover, Hg(2+) detection limits of CCL micelles were considerably enhanced to 3.0 and 1.8 nM at 25 and 40 °C, when the thermoresponsive cores are at their swollen and collapsed state, respectively. The high selectivity of CCL micelles to Hg(2+) over other common cations was also demonstrated. Furthermore, in vitro studies revealed that CCL micelles can effectively enter into living cells and sensitively respond to the presence of Hg(2+) ions via the change of fluorescence emission color. This work represents the first example of DHBC-based CCL micelle acting as highly selective and sensitive ratiometric metal ion probes. The structural stability, water dispersibility, biocompatibility, and most importantly the thermo-tunable detection sensitivity of this novel type of CCL micelle-based sensing systems augur well for their future applications as multifunctional nanocarriers for drug delivery, sensing, imaging, and diagnosis.     

Chitosan Cross-Linked Films for Drug Delivery Application

This work evaluated such a cross-linked chitosan based controlled release device to be later used for sustained drug release. Cross linking was required to control chitosan swelling/deswelling rate. Hexamethylene 1,6-Bis (aminocarboxysulfonate), a bisulfite blocked diisocyanate obtained by the reaction of 1,6 Hexamethylene Diisocyanate and Sodium bisulfite, was used as cross linking agent. Two films formulations were tested: 30 and 50% cross-linked, and they were prepared by solvent evaporation technique. Chitosan cross-linked films were characterized for cross linkage by FTIR, for hydrophilicity by Contact Angle and for swelling behavior by Gravimetric method. Cross linking reaction was confirmed by FTIR. Moreover, cross linking increased the hydrophilic character of cross-linked films and suppressed swelling. However, 30% cross-linked film swollen less than the 50% one, while 50% cross-linked film swollen less than chitosan film itself. This behavior was attributed to the hydrophilic character of the cross linking agent and to the polymeric network formation by cross linking.