Silica sol-gel amperometric immunosensor for Schistosoma japonicum antibody assay.

An amperometric immunosensor was constructed by dispersing graphite, schistosoma-japonicum antigen (SjAg) and silica sol-gel at low temperature. The performance characteristics of the prepared immunosensor were examined in the buffered solution of o-aminophenol (o-AP) used as a substrate. It exhibited excellent physical and electrochemical stability with a renewable external surface. A competitive binding assay was employed to determine schistosoma-japonicum antibody (SjAb) with the aid of horseradish peroxidase labeled SjAb (HRP-SjAb). The experimental parameters for SjAb assay were optimized, including the amount of labeled SjAb in incubation solution, incubation time, temperature and the pH of solution. The use of o-AP substrate and amperometric detection at -250 mV (vs. SCE) results in a determination limit of 0.32 microg/ml and a linear range extending up to 0.18 microg/ml. The results of SjAb assay in serum samples demonstrate the feasibility of using the proposed immunosensor for clinical analysis.     

Immunosensor for the Determination of Okadaic Acid Based on Screen-Printed Electrode

A disposable immunosensor for okadaic acid (OA), using a screen-printed electrode (SPE), was developed and characterised. Detection of the product, p-aminophenol, resulting from the reaction catalysed by alkaline phosphatase (AP), was carried out using an amperometric three-electrode system poised at a voltage of + 300 mV versus Ag/AgCl. Alkaline phosphatase was used as a label for the antigen, OA, and two kinds of alkaline phosphatase preparation were studied for the conjugation of okadaic acid. The calibration curve for okadaic acid obtained from the conjugate created from low-activity AP, 969 units/mg, was unsatisfactory in terms of sensitivity, but a high-activity conjugate delivered the required sensitivity and limit of detection. Studies on the stability of the sensor with α-OA antibody and OA-AP conjugate showed that the current response decreased drastically after one day. Stabilisation strategies have been formulated to overcome this problem. The calibration curve obtained with the high activity conjugate was linear up to 40 ng/ml of okadaic acid with a minimum concentration of analyte detected of 5 ng/ml and a detection limit of 2 ng/ml.     

Direct detection of myoglobin in whole blood using a disposable amperometric immunosensor

An amperometric immunosensor for the rapid detection of myoglobin in whole blood was developed. Due to its rapid kinetics, myoglobin is a useful biochemical marker for the early assessment of acute myocardial infarction (AMI). A one-step indirect sandwich assay was employed using a polyclonal goat anti-human cardiac myoglobin antibody with monoclonal mouse anti-myoglobin and goat anti-mouse IgG conjugated to alkaline phosphatase (AP), as the detecting antibodies. The final sensor required 30 min for incubation. The standard curve was linear between 85 and 925 ng/ml. The intra- and inter-assay coefficients of variation were below 8%. No cross-reactivity of the antibodies was found with other cardiac proteins. The overall performance of the sensor, rapid analysis time, wide working range, good precision and specificity demonstrate its potential usefulness for early assessment of AMI.     

Porous silicon as functionalized material for immunosensor application

Recently, for sensor application, porous silicon has received a great deal of attention due to the high specific surface area and the easy fabrication using some established processes of the usual silicon technology. We herein, report the development of a novel immunosensors based on porous silicon for antigen detection. The multilayer immunosensor structure was fabricated following the successive steps: APTS self-assembled monolayer (SAM) layer, glutaaldehyde linker, anti-rabbit IgG binding. The insulating properties of the aminopropyl-triethoxysilane (APTS) monolayer were studied with cyclic voltammetry and the molecular structure was characterized with Fourier-transform infrared (FTIR) technique. The binding between antibody and different antigen concentration (rabbit IgG) was monitored by measuring the capacitance-voltage curve of the antibody functionalized EIS structure. A detection limit of 10 ng/ml of antigen can be detected.     

A new label-free amperometric immunosenor for rubella vaccine

A novel label-free amperometric immunosensor for the detection of rubella vaccine was developed by immobilizing anti-rubella serum on bilayer nano-Au/polymerized o-phenylenediamine film with electrodeposited Prussian Blue (PB) as an electrode transfer mediator on the platinum electrode. The redox reactions of PB as a probe on the platinum surface were blocked due to the binding of the antibody to the antigen, which was investigated by cyclic voltammetry. Therefore, the interaction of the antibody with various concentrations of antigen could be detected by measurements of amperometric response in PBS, and the amperometric response on the surface of the modified electrode was inversely proportional to the concentration of rubella vaccine in the sample. The immunosensor showed a specific response to rubella vaccine in the range 8.1×10^–8–8.0×10^–6 lgCCID₅₀/ml (cell culture infectious dose) and a detection limit of 4.010^–8 lgCCID₅₀/ml at a signal-to-noise ratio of 3. To summarize, the present work provides a low-cost, fast response time, highly sensitive and easy-to-prepare method for the determination of antigen in biological products.     

Increasing the sensitivity of Listeria monocytogenes assays: evaluation using ELISA and amperometric detection

An immunosensor for the detection of Listeria monocytogenes was developed. ELISA and amperometric studies were run in parallel to develop a more sensitive and rapid assay for the bacterium. Conditions for the immunosensor were primarily characterised using ELISA. A direct sandwich assay was employed and the affinities of two polyclonal (goat and rabbit) and one monoclonal (mouse) anti-L. monocytogenes antibodies were compared using this format. Owing to low sensitivity being obtained with all antibodies, biotin-avidin amplification and an indirect sandwich assay were employed. The system was then transferred to screen-printed electrodes (SPEs), the primary antibody being immobilised by cross-linking with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide, and the mode of detection being amperometric. Various parameters (limit of detection, working range, incubation time, cross-reactivity) of the systems were characterised. The effect of direct incubation in milk is also discussed. The final immunosensor had a working range of 1 x 10(6)-1 x 10(3) cells ml-1 and a detection limit of 9 x 10(2) cells ml-1. The assay took about 3.5 h to complete.     

基于自组装电化学免疫传感器对污泥中PCB77的检测

构建了一种基于L-半胱氨酸、 壳聚糖、 戊二醛和纳米金层层自组装技术的新型无标记、 高灵敏电流型免疫传感器, 并用于检测3,3',4,4'-四氯联苯(PCB77). 利用示差脉冲法研究了修饰电极表面的电化学特性以及测试溶液的pH值、 孵育时间和温度对免疫传感器性能的影响. 实验结果表明, 该免疫传感器在含不同浓度PCB77的磷酸盐缓冲溶液(PBS, pH=7.4)中于35 ℃下孵育30 min后, 在含有5 mmol/L K₃Fe(CN)₆/K₄Fe(CN)₆(摩尔比1:1)和0.1 mol/L KCl的PBS溶液(pH=6.0)中测定, 响应电流与PCB77浓度在0.1～160 ng/mL范围内呈良好的线性关系, R=0.9964, 检出限为0.01 ng/mL. 该传感器制备简单、 灵敏度高、 稳定性好, 可以重复使用. 将其用于检测实际污泥样品中的PCB77, 回收率为95%～112%.     

Amperometric Immunosensor for Rapid Detection of Honeybee Pathogen Melissococcus Plutonius

European foulbrood (EFB) is a honeybee larvae disease caused by a bacterium Melissococcus plutonius. An amperometric immunosensor based on a sandwich assay was developed for rapid point‐of‐care detection of this pathogen. An in‐house made anti‐Melissococcus antibody was immobilized to a gold surface of a screen‐printed sensor via self‐assembled monolayer of cysteamine activated with glutaraldehyde. The direct impedimetric detection of captured microbial cells was tested, however, a better performance was obtained after the formation of sandwich with the peroxidase‐labeled antibody in the amperometric mode. The label‐free assay was limited by higher non‐specific binding. The limit of detection of the immunosensor was 6.6×10⁴ CFU mL^?1 (colony‐forming units) with wide linear range between 10⁵ CFU mL^?1 and 10⁹ CFU mL^?1. The whole analysis was completed within 2 h, which is shorter compared to common laboratory diagnostic tools, such as enzyme‐linked immunosorbent assay or polymerase chain reaction. Furthermore, atomic force microscopy was used for confirmation of the bacteria presence on the electrode surface. The developed immunosensor was successfully employed in the analysis of real samples of honeybees and larvae. The achieved results demonstrate the potential of the amperometric immunosensor for practical in‐field diagnosis of EFB, which can prevent infection spreading and connected losses of honeybee colonies.     

Regenerable Leptin Immunosensor Based on Protein G Immobilized Au‐Pyrrole Propylic Acid‐Polypyrrole Nanocomposite

A regenerable, labelless electrochemical immunosensor is investigated. In this work, pyrrole (Py) and pyrrole propylic acid (Pa) were co‐electropolymerized in the presence of gold nanoparticles to form a porous, conductive, stable and hydrophilic nanocomposite, followed by the covalent attachment of protein G to capture an antibody as the probe for the immunoassay. The regeneration of the sensor was achieved by rinsing the electrodes with 0.1 M glycine buffer (pH 2.7). The binding and dissociation of the antibody with protein G and optimization of the efficient immobilization were studied by impedance and optical measurements, respectively. The charge transfer resistance obtained from the impedance measurements is used to study the interaction between antibody‐protein G and antibody‐antigen. The immunosensor performance and its regenerability were evaluated by using anti‐leptin IgG as the probe protein to detect leptin in 0.01 M PBS, and its specificity was tested in 1% human serum. The leptin impedimetric immunosensor exhibits a detection dynamic range of 10–100 000 ng/mL with 10 ng/mL detection limit in 0.01 M PBS+1% serum solutions. This work proves the feasibility to make a sensitive, regenerative electrochemical immunosensor, which could be very useful for environmental control and food analysis.     

Renewable amperometric immunosensor for complement 3 assay based on the sol-gel technique

A renewable amperometric immunosensor based on the sol-gel technique has been constructed by dispersing graphite, complement 3 (C3) antiserum, and sol-gel at low temperature. The prepared immunosensor is rigid, porous, and has a renewable external surface. A competitive binding assay has been used to determine C3 in human serum with the aid of C3 labeled with horseradish peroxidase. The enzyme-labeled antigen can readily diffuse toward the encapsulated antibody, which retains its binding properties. The experimental conditions for the assay with the biocomposite, including the loading of C3 antiserum in the biocomposite, the amount of labeled C3 in incubation solution, incubation time, and temperature, have been optimized. Using C3 labeled with horseradish peroxidase, and o-AP as the substrate, amperometric detection at -150 mV (relative to the SCE) results in a linear detection range of 1.17-35.1 microg mL(-1), with a detection limit of 0.56 microg mL(-1). Serum samples have been assayed and the results demonstrate the feasibility of the proposed immunosensor for clinical analysis. The surface of the immunosensor can be renewed simply by polishing to obtain a fresh immunocomposite ready to use in a new competitive assay.     

A reusable electrochemical immunosensor for carcinoembryonic antigen via molecular recognition of glycoprotein antibody by phenylboronic acid self-assembly layer on gold

A reusable amperometric immunosensor based on the reversible boronic acid-sugar interaction is proposed. The immunosensor was prepared by self-assembling a thiol-mixed monolayer comprised of conjugates of 3-aminophenylboronic acid with 11-mercaptoundecanoic acid (APBA-MUA) and 11-mercapto-1-undecanol (MU) on gold. The resulting boronic acid coating layer can specifically bind with the glycoprotein antibody, enzyme conjugated carcinoembryonic antibody (HRP-anti-CEA). Voltammetric and electrochemical impedance spectroscopic (EIS) studies and surface plasmon resonance (SPR) measurements show that the binding of HRP-anti-CEA to the APBA interface is reversible and the HRP-anti-CEA can be removed with an acidic buffer or a solution containing sorbitol. The bound enzyme-conjugated antibody can retain its enzyme catalytic activity to the reduction of hydrogen peroxide (H(2)O(2)) and its immunoactivity while binding with CEA to form an immunocomplex. After the formation of the immunocomplex, the access of the active center of HRP to thionine was partially inhibited. This leads to a linear decrease in the electrocatalytic response of HRP-anti-CEA-modified electrode over a CEA concentration range of 2.5 to 40.0 ng mL(-1). After monitoring the immunoreaction signals, the immunocomplex can be easily removed from the APBA interface with a regeneration solution. This regenerated APBA interface can rebound with HRP-anti-CEA and be recognized by the antigen, through which a reusable immunosensor with an RSD of 7.1% for four cycles can be obtained. Under optimal conditions, the detection limit for the CEA immunoassay is 1.1 ng mL(-1), at three times background noise. Serum CEA determination results, obtained with the proposed method, shows that the immunosensor has an acceptable accuracy.     

A Novel Amperometric Immunosensor for Phytohormone Abscisic Acid Based on In Situ Chemical Reductive Growth of Gold Nanoparticles on Glassy Carbon Electrode

Abstract

An amperometric immunosensor for phytohormone abscisic acid was developed based on in situ chemical reductive growth of gold nanoparticles on glassy carbon electrode. First, an approximate 10 nm gold layer was sputtered uniformly onto the electrode surface, and then gold nanoparticles were grown directly on the gold layer for antibody adsorption by immersing the electrode into the H₂AuCl₄ solution. Determination was based on an enzyme-linked competitive immunoreaction between free and enzyme-labeled abscisic acid to bind on immobilized antibody on electrode. The linear response was from 10 ng/ml to 10 µg/ml with a detection limit of 5 ng/ml.     

Immunosensor for Detection of the Textile Dye Disperse Orange 1 Based on Non‐conventional Competitive Assay

Textile dyes appear as an important class of compounds that has become a matter of public concern and a serious challenge for scientists and environmentalists due to their large‐scale production and extensive application. In this work, a non‐conventional competitive‐type amperometric immunosensor was successfully developed for detection of the textile dye Disperse Orange 1 (DO1). The DO1 was magnetically captured and separated from the sample solution using magnetic particles (MP) functionalized with the antibody anti‐DO1 and with HRP and gold electrodes were modified with the conjugate DO1‐BSA. Molecules of DO1 immobilized on the electrode surface and DO1 captured by MP compete for antibody binding sites. As a result, the amperometric signal decreases with increasing target DO1 concentration at the capture step, because this decreases, the attachment between the HRP coated MP and the electrode. This strategy allowed us to determine DO1 at the low detection limit of 0.87 ng mL^?1 with great specificity. Also, there were good recoveries for detection of the textile dye in river water samples without the need of sample pre‐treatment. The competitive amperometric immunosensor shows applicability for the determination of small molecules that cannot be determined by conventional competitive or sandwich immunosensors.     

A Reagentless Amperometric Immunosensor for Alpha‐Fetoprotein Based on Gold Nanoparticles/TiO2 Colloids/Prussian Blue Modified Platinum Electrode

A novel reagentless amperometric immunosensor for the determination of alpha‐fetoprotein (AFP) was prepared by immobilizing TiO₂ colloids on Prussian blue (PB) modified platinum electrode, which yielded a positively charged interface with strong adsorption to deposit gold nanoparticles for immobilization of alpha‐fetoprotein antibody (anti‐AFP). The factors influencing the performance of the proposed immunosensors were studied in detail. Under the optimized conditions, cyclic voltammograms determination of AFP showed a specific response in two concentration ranges from 3.0 to 30.0 ng/mL and from 30.0 to 300.0 ng/mL with a detection limit of 1.0 ng/mL at a signal‐to‐noise ratio of 3. The proposed immunosensor exhibited high selectivity, good reproducibility, long‐term stability (>2 months) and good repeatability.     

Renewable amperometric immunosensor for complement 3 assay based on the sol–gel technique

A renewable amperometric immunosensor based on the sol–gel technique has been constructed by dispersing graphite, complement 3 (C3) antiserum, and sol–gel at low temperature. The prepared immunosensor is rigid, porous, and has a renewable external surface. A competitive binding assay has been used to determine C3 in human serum with the aid of C3 labeled with horseradish peroxidase. The enzyme-labeled antigen can readily diffuse toward the encapsulated antibody, which retains its binding properties. The experimental conditions for the assay with the biocomposite, including the loading of C3 antiserum in the biocomposite, the amount of labeled C3 in incubation solution, incubation time, and temperature, have been optimized. Using C3 labeled with horseradish peroxidase, and o-AP as the substrate, amperometric detection at –150 mV (relative to the SCE) results in a linear detection range of 1.17–35.1 μg mL^–1, with a detection limit of 0.56 μg mL^–1. Serum samples have been assayed and the results demonstrate the feasibility of the proposed immunosensor for clinical analysis. The surface of the immunosensor can be renewed simply by polishing to obtain a fresh immunocomposite ready to use in a new competitive assay.     

A novel piezoelectric biosensor for the detection of phytohormone beta-indole acetic acid.

A novel piezoelectric immunosensor has been developed for the determination of beta-indole acetic acid (IAA) in dilute solutions. The detection is based on competitive immunoreaction between a hapten (IAA) and an antigen (IAA-BSA, hapten-protein conjugation) bound to an anti-IAA antibody, immobilized on a quartz crystal microbalance (QCM). The frequency change (y) of the sensor caused by antigen is linearly related to the logarithm of the concentration of IAA (x) in the range of 0.5 ng/ml - 5 microg/ml with a regression equation of the form y = -23x + 151 (r = 0.9937).     

Amperometric immunosensor for the detection of Vibrio cholerae O1 using disposable screen-printed electrodes.

A disposable amperometric immunosensor was studied for the rapid detection of Vibrio cholerae (V. cholerae), the causative agent of cholera, employing an indirect sandwich enzyme linked immunosorbent assay (ELISA) principle. Screen-printed electrodes (SPEs) were fabricated (by using commercial and homemade carbon inks), electrochemically characterized and the assay conditions were optimized for capturing antibodies and antigen. Whole cell lysate (WCL) of V. cholerae was used to raise antibodies in rabbits and mice. The antibodies raised against WCL of V. cholerae were found to be specific, and no cross reactivity was observed with other enteric bacteria. 1-Naphthyl phosphate was used as a substrate with the amperometric detection of its enzymatic hydrolysis product 1-naphthol at a potential of +400 mV vs. Ag/AgCl reference electrode. A comparison between the amperometric detection technique and the standard ELISA was made in terms of the total assay time, the amount of biological materials used and the sensitivity of detection. The minimum detection limit of the amperometric immunosensor for V. cholerae was found to be 10(5) cells/ml in 55 min, while ELISA detected 10(6) cells/ml in 4 h.     

Detection of Cocaine Using the Flow Immunosensor

Abstract

A continuous flow immunosensor has been designed for the detection of cocaine in aqueous samples. The continuous flow immunosensor relies on the displacement of fluorophore-labeled antigen from immobilized monoclonal antibody. The sensitivity and accuracy of the flow immunosensor were investigated while varying the parameters of immobilized antibody density, flow rate, amount of antibody-coated Sepharose used in each column, and the saturation of antibody binding sites with fluorophore-labeled antigen. Using a low density of immobilized anti-benzoylecgonine antibody, as little as 5 ng/ml cocaine could be detected. Small amounts of antibody-coated Sepharose could be used repeatedly and the lifetime of the column was proportional to the amount of Sepharose used. Results were obtained in less than a minute and cross-reactivity against various other drugs was negligible.     

Mediated amperometric immunosensing using single walled carbon nanotube forests

A prototype amperometric immunosensor was evaluated based on the adsorption of antibodies onto perpendicularly oriented assemblies of single wall carbon nanotubes called SWNT forests. The forests were self-assembled from oxidatively shortened SWNTs onto Nafion/iron oxide coated pyrolytic graphite electrodes. The nanotube forests were characterized using atomic force microscopy and resonance Raman spectroscopy. Anti-biotin antibody strongly adsorbed to the SWNT forests. In the presence of a soluble mediator, the detection limit for horseradish peroxidase (HRP) labeled biotin was 2.5 pmol ml(-1) (2.5 nM). Unlabelled biotin was detected in a competitive approach with a detection limit of 16 nmol ml(-1) (16 microM) and a relative standard deviation of 12%. The immunosensor showed low non-specific adsorption of biotin-HRP (approx. 0.1%) when blocked with bovine serum albumin. This immunosensing approach using high surface area, patternable, conductive SWNT assemblies may eventually prove useful for nano-biosensing arrays.     

4-羟基苯乙烯基吡啶为HRP底物的酶荧光免疫传感体系测定布氏杆菌抗体

本文合成了一种新型辣根过氧化物酶（HRP）荧光底物—4-羟基苯乙基吡啶（pHSP）,并首次将它运用于酶联荧光免疫传感体系。对pHSP化学性质的研究证实,pHSP在空气中较稳定,对HRP、H2O2的荧光响应性能优于传统HRP荧光底物如对羟苯乙酸、Amplex Red和佳味醇等。pHSP本身只有极弱的荧光,在HRP催化下可被 H2O2氧化成二聚体产物,该二聚体在300 nm的激发光下能发射波长为437 nm的强荧光,并且反应体系的荧光增加与HRP量在一定浓度范围内成线形相关。根据此原理,建立了兔布氏杆菌抗体的酶联荧光传感分析新方法。运用制备的传感装置测定兔布氏杆菌抗体的线形范围为110-5 1.6 10-3 g/L,抗体检出限为110-5 g/L,相对标准偏差为4.1%（n=11）。 pHSP的二聚体产物水溶性很低,利用设计的装置较好地解决了传统测定溶液体系方法灵敏度打折的问题。