Modified strip saturated models for two equal collinear cracks with coalesced zones in piezoelectric media

Two equal collinear cracks with coalesced interior electric saturation zones are analytically studied for two-dimensional(2D) arbitrary polarized semipermeable piezoelectric media based on a modified strip saturated model. The strip saturated model is modified here by varying the strip saturated constant electric displacement condition to the polynomially varying electric displacement conditions. Based on the linear, quadratic,and cubic electric displacement conditions on the inner and outer saturated zones, different modified strip saturated models are proposed and studied for two equal collinear cracks. With the Stroh formalism and the complex variable technique, these fracture problems are reduced into different types of non-homogeneous Riemann Hilbert problems in unknown generalized complex potential functions. These mathematical problems are then solved with the Riemann-Hilbert approach to obtain the stress and electric displacement components at any point of the domain. The explicit expressions for the outer saturated zone length, the crack opening potential(COP), the crack opening displacement(COD), and the local intensity factors(LIFs) are derived. A numerical study is presented for the modified strip saturated model in 2D arbitrary polarized semipermeable PZT-4 material. The obtained results are compared with those of the strip saturated model, and the effects of the polynomially varying saturation condition on the saturated zones and the applied electrical loadings are presented.     

Strip-coalesced interior zone model for two unequal collinear cracks weakening piezoelectric media

In this paper, a mathematical strip-saturation model is proposed for a poled transversely isotropic piezoelectric plate weakened by two impermeable unequal-collinear hairline straight cracks. Remotely applied in-plane unidirectional electromechanical loads open the cracks in mode-I such that the saturation zone developed at the interior tips of cracks gets coalesced. The developed saturation zones are arrested by distributing over their rims in-plane normal cohesive electrical displacement. The problem is solved using the Stroh formalism and the complex variable technique. The expressions are derived for the stress intensity factors （SIFs）, the lengths of the saturation zones developed, the crack opening displacement （COD）, and the energy release rate. An illustrative numerical case study is presented for the poled PZT-5H ceramic to investigate the effect of prescribed electromechanical loads on parameters affecting crack arrest. Also, the effect of different lengths of cracks on the SIFs and the local energy release rate （LERR） has been studied. The results obtained are graphically presented and analyzed.     

A Crack with an Electric Displacement Saturation Zone in an Electrostrictive Material

A crack with an electric displacement saturation zone in an electrostrictive material under purely electric loading is analyzed. A strip saturation model is here employed to investigate the effect of the electrical polarization saturation on electric fields and elastic fields. A closed form solution of electric fields and elastic fields for the crack with the strip saturation zone is obtained by using the complex function theory. It is found that the K _I -dominant region is very small compared to the strip saturation zone. The generalized Dugdale zone model is also employed in order to investigate the effect of the saturation zone shape on the stress intensity factor. Using the body force analogy, the stress intensity factor for the asymptotic problem of a crack with an elliptical saturation zone is evaluated numerically.     

Complex variable approach in studying modified polarization saturation model in two-dimensional semipermeable piezoelectric media

A modified polarization saturation model is proposed and addressed mathematically using a complex variable approach in two-dimensional(2 D) semipermeable piezoelectric media. In this model, an existing polarization saturation(PS) model in 2D piezoelectric media is modified by considering a linearly varying saturated normal electric displacement load in place of a constant normal electric displacement load, applied on a saturated electric zone. A centre cracked infinite 2D piezoelectric domain subject to an arbitrary poling direction and in-plane electromechanical loadings is considered for the analytical and numerical studies. Here, the problem is mathematically modeled as a non-homogeneous Riemann-Hilbert problem in terms of unknown complex potential functions representing electric displacement and stress components. Having solved the Hilbert problem, the solutions to the saturated zone length, the crack opening displacement(COD), the crack opening potential(COP), and the local stress intensity factors(SIFs) are obtained in explicit forms. A numerical study is also presented for the proposed modified model, showing the effects of the saturation condition on the applied electrical loading, the saturation zone length, and the COP. The results of fracture parameters obtained from the proposed model are compared with the existing PS model subject to electrical loading, crack face conditions, and polarization angles.     

Limited permeable crack in an interlayer between piezoelectric materials with different zones of electrical saturation and mechanical yielding

A plane problem for two identical piezoelectric semi-infinite spaces adhered by means of a thin isotropic interlayer is considered. It is assumed that a crack of a limited electric permeability occurs in the interlayer parallel to its faces. Combined electromechanical loading is prescribed at infinity. It is assumed that the interlayer is softer than the adherent materials. To avoid the singularities, which are typical for the Griffith crack model, two distinct zones – a zone of mechanical yielding and a zone of electrical saturation – of unknown lengths are introduced as crack continuations. These lengths can be essentially different, with the zone of mechanical yielding significantly longer or shorter than the zone of electrical saturation. Assuming that the interlayer thickness tends to zero, a constant normal stress is prescribed in the zone of mechanical yielding and a saturated electrical displacement is prescribed in the zone of electrical saturation. Outside of these zones, the semi-infinite spaces are assumed to be perfectly bonded. This formulation results in a linear fracture mechanics problem with unknown pre-fracture zone lengths. The problem, formulated mathematically by a system of two equations of linear relationship, is solved exactly. The unknown yield and saturated zones lengths are found from the conditions of finiteness of stress and electrical displacement at the ends of these zones for the both cases when the electrical saturated zone is longer and shorter than the zone of mechanical yielding. It is shown that the same equation as for the Griffith crack model can be used for the determination of the electrical displacement in the crack region. The main results of the paper are obtained in the form of simple analytical equations which are convenient for engineering applications. Some numerical illustrations in graphical and tabular form show dependencies of the pre-fracture zone lengths, the energy release rate, the mechanical displacement and electrical potential jumps on the electromechanical loading and the electrical permeability of the crack medium.     

Analysis of electric boundary condition effects on crack propagation in piezoelectric ceramics

There are three types of cracks: impermeable crack, permeable crack and conducting crack, with different electric boundary conditions on faces of cracks in piezoelectric ceramics, which poses difficulties in the analysis of piezoelectric fracture problems. In this paper, in contrast to our previous FEM formulation, the numerical analysis is based on the used of exact electric boundary conditions at the crack faces, thus the common assumption of electric impermeability in the FEM analysis is avoided. The crack behavior and elasto-electric fields near a crack tip in a PZT-5 piezoelectric ceramic under mechanical, electrical and coupled mechanical-electrical loads with different electric boundary conditions on crack faces are investigated. It is found that the dielectric medium between the crack faces will reduce the singularity of stress and electric displacement. Furthermore, when the permittivity of the dielectric medium in the crack gap is of the same order as that of the piezoelectric ceramic, the crack becomes a conducting crack, the applied electric field has no effect on the crack propagation. The project supported by the National Natural Science Foundation of China (19672026, 19891180)     

Effects of electric field on crack growth for a penny-shaped dielectric crack in a piezoelectric layer

The assumptions of impermeable and permeable cracks give rise to significant errors in determining electro-elastic behavior of a cracked piezoelectric material. The former simply imposes that the permittivity or electric displacement of the crack interior vanishes, and the latter neglects also the effects of the dielectric of an opening crack interior. Considering the presence of the dielectric of an opening crack interior and the permeability of the crack surfaces for electric field, this paper analyzes electro-elastic behavior induced by a penny-shaped dielectric crack in a piezoelectric ceramic layer. In the cases of prescribed displacement or prescribed stress at the layer surfaces, the Hankel transform technique is employed to reduce the problem to Fredholm integral equations with a parameter dependent nonlinearly on the unknown functions. For an infinite piezoelectric space, a closed-form solution can be derived explicitly, while for a piezoelectric layer, an iterative technique is suggested to solve the resulting nonlinear equations. Field intensity factors are obtained in terms of the solution of the equations. Numerical results of the crack opening displacement intensity factors are presented for a cracked PZT-5H layer and the effect of applied electric field on crack growth are examined for both cases. The results indicate that the fracture toughness of a piezoelectric ceramic is affected by the direction of applied electric fields, dependent on the elastic boundary conditions.     

Closed form solution for two unequal collinear semi-permeable straight cracks in a piezoelectric media

The problem of two unequal collinear straight cracks weakening a poled transversely isotropic piezoelectric ceramic is addressed under semi-permeable electric boundary conditions on the crack faces. The plate has been subjected to combined in-plane normal(to the faces of the cracks) mechanical and electric loads. Problem is formulated employing Stroh formalism and solved using complex variable technique. The elastic field, electric field and energy release rate are obtained in closed analytic form. A case study is presented for poled PZT-5H cracked plate to study the effect of prescribed mechanical load, electric load, inter-crack distance and crack lengths on crack arrest parameters stress intensity factor (SIF), electric displacement intensity factor (EDIF) and mechanical and total energy release rates (ERR). Moreover a comparative study is done of impermeable and semi-permeable crack face boundary conditions on SIF, EDIF and ERR, and results obtained is presented graphically. It is observed that the effect of dielectric medium in the crack gap cannot be ignored.     

Re-examination of the PKHS crack model in piezoelectric materials

In this paper, the PKHS crack model is re-examined in detail. Some novel features and better understandings are presented. It is found that the normal crack opening displacement jump (NCODJ) across the crack is always extremely small, whereas the electric potential drop (EPD) across the crack is very large for PZT-4 or PZT-5H under 20 MPa and a varying electric field from −0.5 MV/m to 0.5 MV/m. It is also found that the permittivities of the medium inside the crack gap influence the NCODJ and the EPD significantly. Of great significance is that the crack tip energy release rate (ERR) does not always show an even functional dependence on the applied electric field as previous researchers reported. Its variable tendencies (even or odd) depend on the mechanical loading levels, which are called as the load dependence feature here. In PZT-4, this load-dependence feature induced from the increasing mechanical loading may lead to a transformation of the crack tip ERR from an even functional dependence to an odd one when the applied electric loading varies within the range mentioned above, whereas in PZT-5H no such feature exists. This implies that different mechanical loading levels may yield different fracture behaviors when using the crack tip ERR as a fracture criterion. Moreover, the permittivities of medium inside the PKHS crack gap influence the variable tendencies of the ERR significantly. Thus, a useful addition to previous works is provided and a reasonable explanation for the fundamental discrepancy between previous theoretical predictions and experimental observations in piezoelectric fracture can be given. That is, previous experiments were performed for quite different piezoelectric materials, under quite different mechanical loading levels, and with quite different media inside crack gaps.     

Effect of electric displacement saturation on the stress intensity factor for a crack in a ferroelectric ceramic

A crack in a ferroelectric ceramic with perfect saturation under electric loading is analyzed. The boundary of the electric displacement saturation zone ahead of the crack tip is assumed to be ellipse in shape. The shape and size of ferroelectric domain switching zone near a crack tip is determined based on the nonlinear electric theory. The stress intensity factor induced by ferroelectric domain switching under small-scale conditions is numerically obtained as a function of the electric saturation zone parameter and the ratio of the coercive electric field to the yield electric field. It is found that the stress intensity factor increases as the ratio of the semi-axes of the saturation ellipse increases.     

Analysis of cracked functionally graded piezoelectric strip

The fracture behavior of a cracked strip under antiplane mechanical and inplane electrical loading is studied. A functionally graded piezoelectric strip with exponential material gradation is under consideration. The mechanical and electrical loading is combined via loading coupling factor. The problem of a graded piezoelectric strip containing a screw dislocation is solved. This solution results in stress and electric displacement components with Cauchy singularity. Based on the solution achieved for the dislocation, the distributed dislocation technique (DDT) is utilized to form any geometry of multiple cracks and analyze the behavior of a cracked strip under antiplane mechanical and inplane electrical loading. This technique is capable of the analysis of a strip with a system of interacting cracks. Several examples including strips with single crack, two straight cracks and two curved cracks are presented.     

Nonlinear behaviour of interacting dielectric cracks in piezoelectric materials

Existing studies on the fracture of cracked piezoelectric materials have been limited mostly to the electrically impermeable and permeable crack models, which represent the limiting cases of the physical boundary condition along the crack surfaces. This paper presents a study on the electromechanical behaviour of interacting dielectric cracks in piezoelectric materials. The cracks are filled with dielectric media and, as the result, the electric boundary condition along the crack surfaces is governed by the opening displacement of the cracks. The formulation of this nonlinear problem is based on simulating the cracks using distributed dislocations and solving the resulting nonlinear singular integral equations. Multiple deformation modes are observed. A solution technique is developed to determine the desired deformation mode of the interacting cracks. Numerical results are given to show the effect of the interaction between parallel cracks. Attention is paid to the transition between permeable and impermeable models with increasing crack opening.     

Opening and contact zones of an interface crack in a piezoelectric bimaterial under combined compressive-shear loading

A plane problem for a tunnel electrically permeable interface crack between two semi-infinite piezoelectric spaces is studied. A remote mechanical and electrical loading is applied. Elastic displacements and potential jumps as well as stresses and electrical displacement along the interface are presented using a sectionally holomorphic vector function. It is assumed that the interface crack includes zones of crack opening and frictionless contact. The problem is reduced to a combined Dirichlet–Riemann boundary value problem which is solved analytically. From the obtained solution, simple analytical expressions are derived for all mechanical and electrical characteristics at the interface. A quite simple transcendental equation, which determines the point of separation of open and close sections of the crack, is found. For the analysis of the obtained results, the main attention is devoted to the case of compressive-shear loading. The analytical analysis and numerical results show that, even if the applied normal stress is compressive, a certain crack opening zone exists for all considered loading values provided the shear field is present. It is found that the shear stress intensity factor at the closed crack tip and the energy release rates at the both crack tips depend very slightly on the magnitude of compressive loading.     

Modeling of pre-fracture zones for limited permeable crack in piezoelectric materials

A plane-strain problem for a limited permeable crack in an adhesive thin interlayer between two semi-infinite piezoelectric spaces is considered. The tensile mechanical stress and the electric displacement are applied at infinity. The interlayer is assumed to be softer than the connected materials; therefore, the zones of mechanical yielding and electric saturations can arise at the crack tips on the continuations of the crack. These zones are considered in this work. It was assumed that the length of electric saturation zones is larger than the length of mechanical yield zones. The zones of mechanical yielding are modeled by the crack continuations with normal compressive stresses applied at its faces. The electric saturation zones are modeled by segments at the crack continuations with prescribed saturated electric displacements. These electric displacements can linearly vary along the mechanical yielding zones. The problem is reduced to the Hilbert–Riemann problem of linear relationship, which is solved exactly. The equation for the determination of the yielding zones length, the expressions for the crack-opening displacement jump, electric potential jump, and J-integral is obtained in an analytical form. In case of finite size body, the finite elements method is used and the variation in the fracture mechanical parameters with respect to this size is demonstrated.     

含圆孤裂纹系的压电材料反平面应变问题

应用复变函数解析延展原理，并通过求解Ｒｉｅｍａｎｎ－Ｈｉｌｂｅｒｔ问题，得到了含圆弧裂纹压电材料反平面应变问题的一般解，对单个圆弧裂纹的情形，给出了封闭形式的复函数解和场强度因子，结果表明，当无限远处或裂纹表面同时受机械载荷（应力τ＾∞或Ｔｚ）和电载荷（电位移Ｄ＾∞或电荷ｑ）联合作用时，应力强度因子仅与机械载荷有关，而电位移动强度因子仅与电载荷有关。     

含力磁屈服区的压磁材料硬币型裂纹问题研究

本文利用Hankel 变换及Copson 求解方法,得到了在无穷远处磁荷载以及对称力荷载作用下的无限大压磁材料中,硬币型裂纹在裂纹尖端含有环状力磁双屈服区情况下的相关解析解．本文考虑了磁屈服区尺寸小于、大于、等于力屈服区尺寸的三种情况．结果表明：屈服区尺寸不仅与外荷载及材料常数相关,更与力磁屈服区尺寸的相对大小有关;其中,较大尺寸的屈服区仅受同性质单一荷载影响,与材料常数无关;而较小尺寸屈服区受力磁两荷载与材料常数共同影响;裂纹张开位移、磁势跳变均沿裂纹面径向增大而减小;裂尖张开位移、裂尖磁势跳变与材料常数相关,且随外荷载增大而增大．     

压电材料反平面III型裂纹电塑性区的分析

本文对反平面III型裂纹电塑性区进行了分析。采用条带模型得到了电塑性区大小的表达式。对于电塑性区的边界条件采用了两种处理方式,一是采用机械位移连续性边界条件,另一种是假设电塑性区的切应力保持为常数的假设。其中后一种处理方式消除了电场和应力在裂纹尖端的奇异性,与实际情况相符合。两种处理方式得到了相同的电塑性区的大小的表达式,并根据两种处理方式计算了能量释放率。类比Irwin的应力松弛模型,本文采用电位移松弛模型同样得到了电塑性区的大小。将条带模型得到的结果与电位移松弛模型得到的结果进行比较发现,在小范围塑性变形条件下,两种方法所得的结果比较接近,从而说明这两种方法的有效性,得到了比较满意的结果。     

Investigation of the dynamic behavior of two parallel symmetric cracks in piezoelectric materials use of non-local theory

In this paper, the dynamic behavior of two parallel symmetric cracks in piezoelectric materials under harmonic anti-plane shear waves is investigated by use of the non-local theory for permeable crack surface conditions. To overcome the mathematical difficulties, a one-dimensional non-local kernel is used instead of a two-dimensional one for the problem to obtain the stress occurs near the crack tips. By means of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations that the unknown variables are the jumps of the displacement along the crack surfaces. These equations are solved using the Schmidt method. Numerical examples are provided. Contrary to the previous results, it is found that no stress and electric displacement singularity is present near the crack tip. The non-local elastic solutions yield a finite hoop stress near the crack tip, thus allowing for a fracture criterion based on the maximum stress hypothesis. The finite hoop stress at the crack tip depends on the crack length, the frequency of the incident wave, the distance between two cracks and the lattice parameter of the materials, respectively. Contrary to the impermeable crack surface condition solution, it is found that the dynamic electric displacement for the permeable crack surface conditions is much smaller than the results for the impermeable crack surface conditions. The results show that the dynamic field will impede or enhance crack propagation in the piezoelectric materials at different stages of the dynamic load.     

An interface crack with partially electrically conductive crack faces under antiplane mechanical and in-plane electric loadings

An interface crack in a bimaterial piezoelectric space under the action of antiplane mechanical and in-plane electric loadings is analyzed. One zone of the crack faces is electrically conductive while the other part is electrically permeable. All electro-mechanical values are presented using sectionally-analytic vector-functions and a combined Dirichlet-Riemann boundary value problem is formulated. An exact analytical solution of this problem is obtained. Simple analytical expressions for the shear stress, electric field and also for mechanical displacement jump of the crack faces are derived. These values are also presented graphically along the corresponding parts of the material interface. Singular points of the shear stress, electric field and electric displacement jump are found. Their intensity factors are determined as well. Intensity factors variations with respect to the external electric field and different ratios between the electrically conductive and electrically permeable crack face zones are also demonstrated.     

Curve cracks lying along a parabolic curve in anisotropic body

ＣＵＲＶＥＣＲＡＣＫＳＬＹＩＮＧＡＬＯＮＧＡＰＡＲＡＢＯＬＩＣＣＵＲＶＥＩＮＡＮＩＳＯＴＲＯＰＩＣＢＯＤＹＨｕＹｕａｎ－ｔａｉ（胡元太）ＺｈａｏＸｉｎｇ－ｈｕａ（赵兴华）（ＳｈａｎｇｈａｉＵｎｉｖｅｒｓｉｔｙ;ＳｈａｎｇｈａｉＩｎｓｔｉｔｕｔｅｏｆＡ...