正交各向异性加筋板屈曲分析方法研究

为简化正交各向异性加筋板屈曲分析,本文将筋条位移场用其所在位置的板的位移表达,建立加筋板总势能,通过离散位移场,利用最小势能原理,推导出基于里兹法的正交各向异性加筋板屈曲分析控制方程,采用Matlab进行求解.基于本文推导的方程对单筋和三筋加筋板在不同压剪比下的屈曲荷载和模态进行分析,得到与Abaqus基本一致的结果....     

A finite element study on the large amplitude flexural vibration characteristics of FGM plates under aerodynamic load

The large amplitude flexural vibration characteristics of functionally graded material (FGM) plates are investigated here using a shear flexible finite element approach. Material properties of the plate are assumed to be graded in the thickness direction according to a simple power-law distribution in terms of volume fractions of the constituents. The effective material properties are then evaluated based on the rule of mixture. The FGM plate is modeled using the first-order shear deformation theory based on exact neutral surface position and von Kármán’s assumptions for large displacement. The third-order piston theory is employed to evaluate the aerodynamic pressure. The governing equations of motion are solved by harmonic balance method to study the vibration amplitude of FGM plates under supersonic air flow. Thereafter, the non-linear equations of motion are solved using Newmark’s time integration technique to understand the flexural vibration behavior of FGM plates in time domain (simple harmonic or periodic or quasi-periodic). This work is new in the sense that it deals with the non-linear flutter characteristics of FGM plates under high supersonic airflow accounting for both the geometric and aerodynamic non-linearities. Some parametric study is conducted to understand the influence of these non-linearities on the flutter characteristics of FGM plates.     

功能梯度压电圆板轴对称自由振动问题精确解

将功能梯度压电圆板的位移变量和电势变量写为分离变量的形式，由压电动力学平衡方程导出以位移、电势及其一阶导数为状态变量的状态方程，考虑周边固支接地的边界条件，导出了求解功能梯度压电圆板自振频率精确解的方程。将方程退化至一般的非梯度纯弹性圆板的形式，求解其自振频率，得到的结果与相应的理论解完全吻合，从而验证了本文方法的正确性。更进一步地对梯度函数沿板厚以指数形式变化的功能梯度压电圆板的自振频率进行了计算，并得到了梯度化对板自振频率的影响规律。     

四边简支矩形中厚板的弯曲

本文采用Reissner中厚板理论求解了四边简支矩形中厚板的弯曲问题。文中首先对Reissner中厚板理论的控制方程进行了适当的变更,使之成为非耦联的二阶偏微分方程组,然后利用有限积分变换法求解所得新的控制方程,得到了四边简支矩形中厚板受均布载荷作用下的解析解。文中所述方法可用以求解具有其它边界条件和载荷的矩形中厚板的弯曲问题,同时还可移植应用于其它中厚板理论。     

A refined theory of elastic thick plates for extensional deformation

Based on elasticity theory, various two-dimensional (2D) equations and solutions for extensional deformation have been deduced systematically and directly from the three-dimensional (3D) theory of thick rectangular plates by using the Papkovich–Neuber solution and the Lur’e method without ad hoc assumptions. These equations and solutions can be used to construct a refined theory of thick plates for extensional deformation. It is shown that the displacements and stresses of the plate can be represented by the displacements and transverse normal strain of the midplane. In the case of homogeneous boundary conditions, the exact solutions for the plate are derived, and the exact equations consist of three governing differential equations: the biharmonic equation, the shear equation, and the transcendental equation. With the present theory a solution of these can satisfy all the fundamental equations of 3D elasticity. Moreover, the refined theory of thick plate for bending deformation constructed by Cheng is improved, and some physical or mathematical explanations and proof are provided to support our justification. It is important to note that the refined theory is consistent with the decomposition theorem by Gregory. In the case of nonhomogeneous boundary conditions, the approximate governing differential equations and solutions for the plate are accurate up to the second-order terms with respect to plate thickness. The correctness of the stress assumptions in the classic plane-stress problems is revised. In an example it is shown that the exact or accurate solutions may be obtained by applying the refined theory deduced herein.     

弹性圆板的热过屈曲

基于精确的圆薄板轴对称大挠度变形几何方程，建立了均匀加热圆板轴对称热弹性屈曲问题位移形式的控制方程，采用打靶法和解析延拓法获得了连续依赖于温度载荷的圆板过屈曲状态解，给出了相应的数值结果。     

Plastic buckling analysis of thick plates using p-Ritz method

This paper is concerned with the application of the p-Ritz method for the plastic buckling analysis of thick plates. In order to allow for the effect of transverse shear deformation in thick plates, the Mindlin plate theory is adopted. The plastic buckling behaviour of the plate is captured by using the incremental and deformation theories of plasticity. The material property of the plate is assumed to obey the Ramberg–Osgood stress–strain relation. The p-Ritz method will be applied to obtain the governing eigenvalue equation for the plastic buckling analysis of uniformly stressed plates with edges defined by polynomial functions. In the p-Ritz method, the displacement functions of the plate are approximately represented by the product of mathematically complete two-dimensional polynomial functions and boundary equations raised to appropriate powers that ensure the satisfaction of the geometric boundary conditions. The validity, convergence and accuracy of the method were demonstrated for various plate shapes such as rectangular, triangular and elliptical shapes. A parametric study was also undertaken to study the plastic buckling behaviour and the effect of transverse shear deformation.     

厚圆板轴对称振动的弹性力学解

本文以轴对称三维弹性力学基本方程为基础,导出厚圆板强迫振动的状态方程式。利用Ｍａｃｌａｕｒｉｎ级数和Ｓｙｌｖｅｓｔｅｒ定理,厚圆板的位移和应力可以用中面位移和应力的微分算子表示。通过载荷分解和圆板表面条件,可以得到厚圆板在对称载荷与反对称载荷作用下的振动控制方程。求解了厚圆板在周边固支和简支条件下的对称与反对称的自由振动问题。通过数值计算得到了这两类自由振动的固有频率。本文的方法适用于求解厚圆板在     

考虑几何与压电非线性行为压电层合轴对称圆板的精确解

研究可移简支及夹支边界条件下,轴对称压电层合圆板在强电场和机械荷载联合作用下的非线性变形.考虑电致伸缩的非线性压电效应及几何非线性的影响,导出轴对称压电层合圆板的控制方程.通过调整坐标轴的位置对控制方程进行简化,得到关于挠度和径向力的4阶非线性控制方程.再通过简单的积分并引入无量刚变量将控制方程等价地化为2阶非线性耦合微分方程组.利用幂级数法得到可移简支及夹支边界条件下强电场和均布荷载共同作用时的挠度、径向力及径向位移的幂级数精确解.通过对双、单压电晶片执行器的数值计算及分析,得到电场、外载对于位移、径向力的影响关系.     

Bending of annular sectorial Mindlin Plates using Kirchhoff results

This study is concerned with the elastic bending problem of a class of annular sectorial plates whose radial edges are simply supported. Exact bending relationships between the Mindlin plate results and the corresponding Kirchhoff plate solutions have been derived based on the concept of load equivalence. These bending relationships facilitate the deduction of thick (Mindlin) plate results from the corresponding classical thin (Kirchhoff) plate solutions, thus bypassing the need to solve the more complicated governing equations of thick plates. The correctness of the relationships is established by solving the bending problem of annular sectorial plates under a uniformly distributed load and comparing the results with existing thick plate solutions.     

A differential quadrature procedure for three-dimensional buckling analysis of rectangular plates

This paper presents an application of the differential quadrature (DQ) method for three-dimensional buckling analysis of rectangular plates. The governing equations of the plate model are first presented in terms of displacement, stress displacement relationship, and boundary conditions with three-dimensional flexibility. These equations are then normalised and discretised using the DQ procedure. Example problems pertaining to the buckling of rectangular plates with generic boundary conditions are selected to illustrate the efficiency and simplicity of implementing the DQ procedure. The convergence characteristics of the method are first conducted based on numerical studies. The DQ solutions are then compared, where possible, with exact or approximate solutions. It is found that the differential quadrature method yields accurate results for the plate problems under the current investigation. In addition to the above, some parametric studies are carried out by varying the plates aspect ratio, boundary conditions and thickness to width ratio under axial and biaxial loading.     

Large deflection of rectangular sandwich plates

The governing differential equations and the boundary conditions for the large deflection of rectangular sandwich plates are derived using the principle of the complementary energy. The governing differential equations are transformed into systems of nonlinear algebraic equations using the finite difference method, and solved by successive iteration. For the purpose of illustration, deflection behavior of simply supported rectangular plates under uniform load is presented. The deflection behavior of plates with various values of shear rigidities and intensity of applied loads is studied. The change in the stress patterns of the face layers of the plate is also discussed.     

Mechanical buckling and free vibration of thick functionally graded plates resting on elastic foundation using the higher order B-spline finite strip method

In this study, the mechanical buckling and free vibration of thick rectangular plates made of functionally graded materials (FGMs) resting on elastic foundation subjected to in-plane loading is considered. The third order shear deformation theory (TSDT) is employed to derive the governing equations. It is assumed that the material properties of FGM plates vary smoothly by distribution of power law across the plate thickness. The elastic foundation is modeled by the Winkler and two-parameter Pasternak type of elastic foundation. Based on the spline finite strip method, the fundamental equations for functionally graded plates are obtained by discretizing the plate into some finite strips. The results are achieved by the minimization of the total potential energy and solving the corresponding eigenvalue problem. The governing equations are solved for FGM plates buckling analysis and free vibration, separately. In addition, numerical results for FGM plates with different boundary conditions have been verified by comparing to the analytical solutions in the literature. Furthermore, the effects of different values of the foundation stiffness parameters on the response of the FGM plates are determined and discussed.     

The wave propagation and dynamic response of rectangular functionally graded material plates with completed clamped supports under impulse load

In this paper, the wave propagation and dynamic response of the rectangular FGM plates with completed clamped supports under impulse load are analyzed. The effective material properties of functionally graded materials (FGMs) for the plate are assumed to vary continuously through the plate thickness and be distributed according to a volume fraction power law along the plate thickness. Considering the effects of transverse shear deformation and rotary inertia, the governing equations of the wave propagation in the functionally graded plate are derived by using the Hamilton’s principle. A complete discussion of dispersion of the FGM plates is given. Using the dispersion relation and integral transforms, exact integral solutions for the FGM plates under impulse load are obtained. The influence of volume fraction distributions on wave propagation and dynamic response of the FGM plates is analyzed.     

Bending solution of third-order orthotropic Reddy plates with asymmetric interfacial crack

In this paper Reddy’s third-order shear deformable plate theory is applied to asymmetrically delaminated orthotropic composite plates under antiplane–inplane shear fracture mode. A double-plate system is utilized to capture the mechanical behavior of the uncracked plate portion. An assumed displacement field is used and modified in order to satisfy the traction-free conditions at the top and bottom plate boundaries. Moreover, the system of exact kinematic conditions was also implemented into the novel plate model. An important improvement of this work compared to previous papers is the continuity condition of the shear strains at the interface of the double-plate system. Applying these conditions it is shown that the nineteen parameters of the third-order displacement field can be reduced to nine. Using the simplified displacement field the governing equations are derived, as well. The solution of a simply-supported delaminated plate is presented using the state-space model and the displacement, strain and stress fields are determined, respectively. The energy release rate and mode mixity distributions are calculated using the 3D J-integral. The analytical results are compared to those by finite element computations and it is concluded that the present model is the most accurate one among the previous plate theory-based approaches.     

An analytical solution for buckling of moderately thick functionally graded sector and annular sector plates

In this article, an analytical solution for buckling of moderately thick functionally graded (FG) sectorial plates is presented. It is assumed that the material properties of the FG plate vary through the thickness of the plate as a power function. The stability equations are derived according to the Mindlin plate theory. By introducing four new functions, the stability equations are decoupled. The decoupled stability equations are solved analytically for both sector and annular sector plates with two simply supported radial edges. Satisfying the edges conditions along the circular edges of the plate, an eigenvalue problem for finding the critical buckling load is obtained. Solving the eigenvalue problem, the numerical results for the critical buckling load and mode shapes are obtained for both sector and annular sector plates. Finally, the effects of boundary conditions, volume fraction, inner to outer radius ratio (annularity) and plate thickness are studied. The results for critical buckling load of functionally graded sectorial plates are reported for the first time and can be used as benchmark.     

Multiple mode large amplitude vibration of thick orthotropic circular plates

This paper is analytically concerned with the large amplitude vibration of thick orthotropic circular plates incorporating the effects of transverse shear and rotatory inertia. Von Kármán-type field equations written in terms of the three displacement components of the plate are utilized to obtain solutions to clamped stress-free and immovable plates. By means of Galerkin's technique and a numerical Runge-Kutta procedure a multiple-mode analysis is carried out in both cases. Exact solutions are reported for two of the three governing equations. Effects of transverse shear deformation and modal interaction are found to be significant for orthotropic thick plates. The method given here could be extended to the multiple-mode analysis of circular plates with other boundary conditions.     

Dynamical behaviors of nonlinear viscoelastic thick plates with damage

Based on the deformation hypothesis of Timoshenko's plates and the Boltzmann's superposition principles for linear viscoelastic materials, the nonlinear equations governing the dynamical behavior of Timoshenko's viscoelastic thick plates with damage are presented. The Galerkin method is applied to simplify the set of equations. The numerical methods in nonlinear dynamics are used to solve the simplified systems. It could be seen that there are plenty of dynamical properties for dynamical systems formed by this kind of viscoelastic thick plate with damage under a transverse harmonic load. The influences of load, geometry and material parameters on the dynamical behavior of the nonlinear system are investigated in detail. At the same time, the effect of damage on the dynamical behavior of plate is also discussed.     

An inverse problem for a functionally graded elliptical plate with large deflection and slightly disturbed boundary

This paper deals with the inverse problem of a functionally graded material (FGM) elliptical plate with large deflection and disturbed boundary under uniform load. The properties of functionally graded material are assumed to vary continuously through the thickness of the plate, and obey a simple power law expression based on the volume fraction of the constituents. Based on the classical nonlinear von Karman plate theory, the governing equations of a thin plate with large deflection were derived. In order to solve this non-classical problem, a perturbation technique was employed on displacement terms in conjunction with Taylor series expansion of the disturbed boundary conditions. The displacements of in-plane and transverse are obtained in a non-dimensional series expansion form with respect to center deflection of the plate. The approximate solutions of displacements are solved for the first three terms, and the corresponding internal stresses can also be obtained.     

高阶剪切变形理论下三边夹紧一边铰支复合材料层板的几何非线性分析

首先用虚位移原理推导出以位移形式表达的Reddy型高阶剪变形理论复合材料层板的非线性控制方程及相应的边界条件。选定的五个位移函数均满足三边夹紧一边铰支边界条件，用Galerkin方法把无量纲化之后的控制方程转化为一组非线性代数方程组，用线性化的方法和可调节参数的修正迭代法求解这组方程。最后求出了不同复合材料的挠度和弯矩值。