CIEF with hydrodynamic and chemical mobilization for the separation of forms of alpha-1-acid glycoprotein

Alpha-1-acid glycoprotein (AGP) is a protein that exists in different forms, which is due to variations in the amino acid sequence and/or in the glycosidic part of the protein. These differences confer to these forms, among other characteristics, diverse pIs. Changes in these forms of AGP have been correlated to modifications of the pathophysiological conditions of the individuals. One of the analytical techniques employed for their study has been IEF performed in slab gels. CIEF method with hydrodynamic and chemical mobilization, involving an isotachophoretic process, is developed in this work to separate up to 12 bands of forms of standard AGP, which is proposed as a more reproducible, quantitative, less sample-consuming, and more automated one than conventional IEF. The challenge of this work has been the development of a CIEF method for the separation of bands of a very acidic protein (pI range: 1.8-3.8) in a capillary. Intraday RSD values < or = 1.7% have been achieved for the relative migration time of the AGP bands to that of an internal standard. For intraday area precision, RSD (%) in the range of 2.70-22.71% for AGP zones accounting for more than 10% of total area of AGP sample has been obtained. As a proof of the potential of the methodology proposed, an AGP sample purified from a pool of sera of patients suffering from ovary cancer is analyzed by CIEF.     

Optimization of an IgG1 CIEF separation by using narrow-range ampholytes and DMSO as protein solubilizer

CIEF is a powerful separation tool utilized in the characterization and relative quantitation of therapeutic mAb charged isoforms. However, one CIEF method is not capable of separating all mAbs with high resolution and reproducibility. Optimization of sample composition and separation parameters is expected when developing a CIEF method for a specific mAb. This paper summarizes a root cause investigation into why a validated CIEF separation method for MAK33 (a type of IgG1) was no longer reproducible. In addition, this paper introduces the concept of sample focusing volume, which is defined as the actual capillary volume occupied by the sample after focusing and explains why there is less protein precipitation and aggregation when using narrow-range ampholytes than broad-range ampholytes. The use of DMSO as protein solubilizer and possible replacement of urea is also explored in this work. Finally, this paper demonstrates that a new optimized CIEF method can achieve over 100 reproducible high-resolution separations of MAK33 per neutral-coated capillary.     

CIEF method optimization: Development of robust and reproducible protein reagent characterization in the clinical immunodiagnostic industry

Several method parameters have been refined for application of CIEF methods to provide optimal capillary robustness and performance longevity while maintaining desired analytical output for the ever increasing characterization scrutiny of protein reagents used in clinical assay formulations. Demonstrated here are significant modifications to the existing protocols in order to attain a robust, reproducible method that achieves as much as a 20‐fold increase in the number of consecutive runs before capillary degradation. Not only is it a concern for the rudimentary analysis of acidic and basic components of the isoform profile for monoclonal antibodies, but a comprehensive identification of each individual isoform to obtain a characteristic fingerprint is necessary for minor distinguishable properties between multiple proteins in unambiguous identification. In order to maintain the integrity of these modifications, extensive studies were conducted on an implemented system suitability standard protein with specifically defined parameters indicating either sufficient or poor separation performance.     

新型毛细管等电聚焦驱动方法的建立及其应用

毛细管等电聚焦(CIEF)在生物分离分析领域中的发展迅速．CIEF可分为两步法聚焦和一步法聚焦．电渗流(EOF)可作为一种新的驱动力．Rassi等根据串连体系中电渗流速率将被平均化的原理,将未涂层毛细管与聚乙二醇涂层的毛细管通过聚四氟乙烯管耦合起来,成功地利用毛细管区带电泳快速分离蛋白．此外,利用电渗流输液原理设计的电渗泵还可用作流动注射和微柱液相色谱的驱动系统。     

Isoelectric point determination by imaged CIEF of commercially available SARS-CoV-2 proteins and the hACE2 receptor

In order to contribute to the scientific research on the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), we have investigated the isoelectric points (pI) of several related proteins, which are commercially available: the receptor-binding domain (RBD) with His- and Fc-tag, the S1 subunit with His-tag, the S1/S2 subunits with His-tag and the human angiotensin-converting enzyme 2 (hACE2) with His-tag. First, the theoretical pI values, based on the amino acid (AA) sequences of the proteins, were calculated using the ProtParam tool from the Bioinformatics Resource Portal ExPASy. The proteins were then measured with the Maurice imaged CIEF system (native fluorescence detection), testing various measurement conditions, such as different ampholytes or ampholyte mixtures. Due to isoforms, we get sections with several peaks and not just one peak for each protein. The determined pI range for the RBD/Fc is 8.24–9.32 (theoretical pI: 8.55), for the RBD/His it is 7.36–9.88 (8.91) and for the S1/His it is 7.30–8.37 (7.80). The pI range of the S1/S2/His is 4.41–5.87 (no theoretical pI, AA sequence unknown) and for hACE2/His, the determined global range is 5.19–6.11 (5.60) for all experimental conditions chosen. All theoretically derived values were found within these ranges, usually close to the center. Therefore, we consider theoretical values as useful to make predictions about the isoelectric points of SARS-CoV-2 proteins. The experimental conditions had only a minor influence on the pI ranges obtained and mainly influenced the peak shapes.     

Probabilistic model of influenza virus transmissibility at various temperature and humidity conditions

The spread efficiency of influenza virus is significantly affected by several environmental parameters. However, neither the underlying reasons, nor the exact character and magnitude of the phenomena involved are sufficiently well understood. Here we present a probabilistic approach to the virus transmission events. For a sample ensemble, we construct a model of the infectivity as a function of the ambient conditions, and we determine its parameter values on the basis of the available experimental data.     

Foot and mouth disease virus concentration and purification by affinity chromatography

Foot and mouth disease virus, (FMDV) from a crude cell lysate was purified in a single step by affinity chromatography with heparin as a ligand. The virus eluted from an Heparin-Ultrogel A₄R column at 1M sodium chloride in 10 mM sodium phosphate buffer, pH 7.0, while most cell protein and albumin did so at lower concentrations of sodium chloride in the same buffer. Purity of the eluted fraction containing the virus was assessed by SDS-PAGE, HPLC, ultracentrifugation, and UV absorption spectrum. With this method, intact viral particles are recovered in high yield (over 90%) and specific virus purity increases nearly 1000-fold. The capacity of the Chromatographic matrix for the virus was found to be 1.1 mg viral mass per mL of hydrated gel.     

A two‐step protocol for isolation of influenza A (H7N7) virions and their RNA for PCR diagnostics based on modified paramagnetic particles

Annual epidemics of influenza cause death of hundreds of thousands people and they also have a significant economic impact. Hence, a need for fast and cheap influenza diagnostic method is arising. The conventional methods for an isolation of the viruses are time‐consuming and require expensive instrumentation as well as trained personnel. In this study, we modified the surface of nanomaghemite (γ‐Fe₂O₃) paramagnetic core with tetraethyl orthosilicate and (3‐aminopropyl)triethoxysilane and the resulting particles were utilized for the isolation of H7N7 influenza virions. Consequently, we designed γ‐Fe₂O₃ paramagnetic core modified with calcium tripolyphosphate which was employed for the isolation of viral nucleic acid after virion's lysis. Both of these procedures can be performed rapidly in less than 10 min and, in combination with the RT‐PCR, the whole influenza detection can be shortened to few hours. Moreover, the whole protocol could be easily automated and/or miniaturized, and thus can serve as a basis for use in a lab‐on‐a‐chip device. We assume that magnetic isolation is an exceptional procedure which can significantly accelerate the diagnostic possibilities of a broad spectrum of diseases.     

Detection of influenza virus: traditional approaches and development of biosensors

Influenza is an acute respiratory disease caused by the influenza virus. The disease occurs annually, causing fatality in the elderly and children and billions of dollars loss in business and productivity. Traditional viral detection methods include MDCK cell culture, complement fixation, hemagglutinin-inhibition, and recently RT-PCR. Although effective, these methods generally involve labor-intensive laboratory procedures and often require trained personnel to carry them out. The development of biosensor technologies will enable rapid and specific disease diagnosis on-site so that a clinician can quickly determine whether treatment is needed. This paper reviews traditional viral assays and progress in the biosensor development for influenza virus. Recent advances in single-step direct detection using non-labeling techniques such as surface plasmon resonance, quartz-crystal microbalance, and colorimetric functional polymers are discussed.     

Reversed phase monolithic analytical columns for the determination of HA1 subunit of influenza virus haemagglutinin

Monoliths are chromatographic stationary phases, which were specially designed for efficient purification of large biomolecules, like proteins, viruses and DNA. In this work, the small scale monolithic butyl (C4) and styrene-divinyl benzene (SDVB) columns were applied for reversed phase analyses of various degraded influenza viruses. The binding of the HA1 subunit of haemagglutinin to the monolithic columns was confirmed by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and the Western blot. The working linear range was determined as 1.60 × 10¹⁰ viral particles/mL to at least 1.64 × 10¹¹ viral particles/mL, the limit of detection was found to be 2.56 × 10⁹ virus particles/mL and the limit of quantification was 5.12 × 10⁹ virus particles/mL. The analytical HPLC method developed with the H1N1 virus was also applicable for the analytics of the HA1 subunit of H3N2 influenza virus and the influenza B virus.     

Reduced surface area chromatography for flow-through purification of viruses and virus like particles

A method for flow-through purification of viruses and virus like nano-particles using a combination of binding and size-exclusion chromatography was developed. This technique relies on minimizing the external surface area per unit volume available for virus binding by increasing the mean diameter of the beads used in the column. At the same time the impurity binding capacity of the column is maximized by utilizing beads with multiple functionalities of the optimum size. Purification of different types of viruses and virus-like-particles could be achieved using this technique. Flow-through purification of influenza virus using this technique yielded virus recoveries greater than 70-80% coupled with impurity removal greater than 80%. Finally an approach to optimize and facilitate process development using this technology is presented. Since the impurity binding occurs via a non-specific mechanism and virus recovery is achieved through reduced surface area, the technique is not limited to specific types of viruses and offers the potential as a universal purification tool.     

Preparative purification of five bioactive components from Agrimonia pilosa Ledeb by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) coupled with ultraviolet (UV) detection or evaporative light-scattering detection was successfully applied for preparative separation of five bioactive compounds from Agrimonia pilosa Ledeb. In preliminary process, D101 macroporous resin was used to separate the crude extract of the plant and four fractions (20, 40, 50, and 60% aqueous ethanol elutions) were produced. Then, these fractions were directly subjected to HSCCC purification. Five chemicals including taxifolin-3-glucoside (6.4 mg), quercetin-3-rhamnoside (13.0 mg), tiliroside (14.7 mg), agrimonolide (21.4 mg), and tormentic acid (29.8 mg) with the purities of 94.24, 95.37, 97.42, 95.29, and 96.34% were separated from each 200 mg prepared fraction. The purities were analyzed by high-performance liquid chromatography, and the chemical structures of the products were identified by UV detection, mass spectrometry, nuclear magnetic resonance, and the standards. This paper used a simple method to separate five bioactive compounds from A. pilosa Ledeb, and it could provide a new idea for the purification of bioactive compounds from other medicinal plants.     

A structural and energetics analysis of the binding of a series of N-acetylneuraminic-acid-based inhibitors to influenza virus sialidase

Summary A molecular dynamics/energy-minimisation protocol has been used to analyse the structural and energetic effects of functional group substitution on the binding of a series of C4-modified 2-deoxy-2,3-didehydro-N-acetylneuraminic acid inhibitors to influenza virus sialidase. Based on the crystal structure of sialidase, a conformational searching protocol, incorporating multiple randomisation steps in a molecular dynamics simulation was used to generate a range of minimum-energy structures. The calculations were useful for predicting the number, location, and orientation of structural water molecules within protein-ligand complexes. Relative binding energies were calculated for the series of complexes using several empirical molecular modelling approaches. Energies were computed using molecular-mechanics-derived interactions as the sum of pairwise atomic nonbonded energies, and in a more rigorous manner including solvation effects as the change in total electrostatic energy of complexation, using a continuum-electrostatics (CE) approach. The CE approach exhibited the superior correlation with observed affinities. Both methods showed definite trends in observed and calculated binding affinities; in both cases inhibitors with a positively charged C4 substituent formed the tightest binding to the enzyme, as observed experimentally.This paper is based on a presentation given at the 14th Molecular Graphics and Modelling Society Conference, held in Cairns, Australia, August 27–September 1, 1995.Presently on a visiting postdoctoral fellowship in the Department of Biomolecular Structure, Glaxo Research & Development Ltd, Greenford, Middlesex UB6 OHE, U.K.     

N-glycan analysis by CGE-LIF: profiling influenza A virus hemagglutinin N-glycosylation during vaccine production

Glycoproteins, such as monoclonal antibodies as well as recombinant and viral proteins produced in mammalian cell culture play an important role in manufacturing of many biopharmaceuticals. To ensure consisting quality of the corresponding products, glycosylation profiles have to be tightly controlled, as glycosylation affects important properties of the corresponding proteins, including bioactivity and antigenicity. This study describes the establishment of a method for analyzing N-glycosylation patterns of mammalian cell culture-derived influenza A virus glycoproteins used in vaccine manufacturing. It comprises virus purification directly from cell culture supernatant, protein isolation, deglycosylation, and clean-up steps as well as "fingerprint" analysis of N-glycan pools by CGE-LIF, using a capillary DNA-sequencer. Reproducibility studies of CGE-LIF, virus purification, and sample preparation have been performed. For demonstrating its applicability, the method was exemplarily used for monitoring batch-to-batch reproducibility in vaccine production, with respect to the glycosylation pattern of the membrane protein hemagglutinin of influenza A/PR/8/34 (H1N1) virus. This method allows characterization of variations in protein glycosylation patterns, directly by N-glycan "fingerprint" alignment.     

DNA purification on a lab-on-valve system incorporating a renewable microcolumn with in situ monitoring by laser-induced fluorescence

Bead injection in a lab-on-valve (LOV) system was adopted for DNA purification via micro solid-phase extraction (SPE) with a renewable silica microcolumn packed in a channel of the LOV unit. The complex matrix components in human whole blood, including proteins, were well eliminated by choosing properly the sample loading and elution media. The DNA purification process was monitored on-line by using laser-induced fluorescence in a demountable side part of the LOV unit incorporating optical fibers. The practical applicability of the entire system was demonstrated by separation/purification of λ-DNA in a simulated matrix and human blood genetic DNA by performing SPE, in situ monitoring of the purified products, and postcolumn PCR amplification. When DNAs in a simulated matrix (10.0 ng μl⁻¹ λ-DNA, 50 ng μl⁻¹ bovine serum albumin, 1.0% Triton X-100) were processed in the present system and laser-induced fluorescence was monitored at 610 nm, an overall extraction/collection efficiency of 70% was achieved by employing identical sample loading and an elution flow rate of 0.5 μl s⁻¹, along with a precision of 3.8% relative standard deviation. DNA separation and purification from human whole-blood samples were performed under similar conditions. Figure Lab-on-valve mesofluidic system employed for DNA separation and purification integrating a demountable fluorescence flow cell for in-situ laser induced fluorescence detection     

Novel staining-free proteomic method for simultaneous identification of proteins and determination of their pI values by using low-molecular-mass pI markers

A new proteomic staining-free method for simultaneous identification of proteins and determination of their pI values by using low-molecular-mass pI markers is described. It is based on separation of proteins in gels by IEF in combination with mass spectrometric analysis of both peptides derived by in-gel digestion and low-molecular-mass pI markers extracted form the same piece excised from the gel. In this method, the pI markers are mixed with a protein mixture (a commercial malted barley protein extract) deposited on a gel and separated in a pH gradient. Color pI markers enable supervision of progress of focusing process. Several separated bands of the pI markers (including separated proteins) were excised and the pI markers were eluted from each gel piece by water/ethanol and identified by MALDI-TOF/TOF MS. The remaining carrier ampholytes were then washed out from gel pieces and proteins were in-gel digested with trypsin or chymotrypsin. Obtained peptides were measured by MALDI-TOF/TOF MS and proteins were identified via protein database search. This procedure allows omitting time-consuming protein staining and destaining procedures, which shortens the analysis time. For comparison, other IEF gels were stained with CBB R 250 and proteins in the gel bands were identified. Similarity of the results confirmed that our approach can give information about the correct pI values of particular proteins in complex samples at significantly shorter analysis times. This method can be very useful for identification of proteins and their post-translational modifications in prefractioned samples, where post-translational modifications (e.g., glycation) are frequent.     

FluClass: A novel algorithm and approach to score and visualize the phylogeny of the influenza virus using mass spectrometry

A novel computer algorithm FluClass has been developed to facilitate the phylogenetic classification of influenza virus using mass spectral data. FluClass accepts a DNA or protein-based phylogenetic tree as input and generates theoretical peptide mass lists for each node. An experimental mass spectrum from an influenza virus protein digest is then placed onto the phylogenetic tree using a novel random resampling function (Z-score) that allows the scoring of spectrum against both internal and leaf nodes. Testing of the algorithm using hemagglutinin protein sequences from human-host influenza viruses showed that the Z-score performs comparably to the Profound scoring method for the scoring of leaf nodes and is substantially better at scoring internal nodes. Scoring of internal nodes allows colorizations of nodes of the phylogenetic tree enabling the classification of the query spectrum to be rapidly visualized. Finally we demonstrate the utility of FluClass on experimental spectra from six strains. Given that mass spectrometry data can be generated rapidly for influenza virus proteins, FluClass provides a fast and direct method for phylogenetic analysis of influenza proteins.     

Regeneration of total RNA purification silica-based columns

Silica-based columns are largely used in RNA purification, allowing fast extractions and good yields of high quality nucleic acid, but their major limitation is the high cost. The reuse of such columns, although desirable, is not recommended because of residual amounts of material from the previous sample trapped in the column matrix, which might be released during further purification. Thus, recycling does need previous complete removal of any detectable RNA trace, but to date no protocol which allows decontamination and reuse is available.We report a very rapid decontamination procedure, based on treatment with warm alkaline solution containing Triton X-100, which ensures no RNA carry-over, and allows the recycling of columns without impairment of their efficiency in high-quality RNA purification even after several regeneration rounds.     

Improved purification of immunoglobulin G from plasma by mixed‐mode chromatography

Efficient loading of immunoglobulin G in mixed‐mode chromatography is often a serious bottleneck in the chromatographic purification of immunoglobulin G. In this work, a mixed‐mode ligand, 4‐(1H‐imidazol‐1‐yl) aniline, was coupled to Sepharose Fast Flow to fabricate AN SepFF adsorbents with ligand densities of 15–64 mmol/L, and the chromatographic performances of these adsorbents were thoroughly investigated to identify a feasible approach to improve immunoglobulin G purification. The results indicate that a critical ligand density exists for immunoglobulin G on the AN SepFF adsorbents. Above the critical ligand density, the adsorbents showed superior selectivity to immunoglobulin G at high salt concentrations, and also exhibited much higher dynamic binding capacities. For immunoglobulin G purification, both the yield and binding capacity increased with adsorbent ligand density along with a decrease in purity. It is difficult to improve the binding capacity, purity, and yield of immunoglobulin G simultaneously in AN SepFF chromatography. By using tandem AN SepFF chromatography, a threefold increase in binding capacity as well as high purity and yield of immunoglobulin G were achieved. Therefore, the tandem chromatography demonstrates that AN SepFF adsorbent is a practical and feasible alternative to MEP HyperCel adsorbents for immunoglobulin G purification.