Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

Study on the thermal behavior of the complexes of the type [PdX<Subscript>2</Subscript>(tdmPz)] (X = Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, I<Superscript>−</Superscript>, SCN<Superscript>−</Superscript>)

Four new mononuclear Pd(II) complexes of the type [PdX₂(tdmPz)] {X = Cl⁻ (1); Br⁻ (2); I⁻ (3); SCN⁻ (4); tdmPz = 1-thiocarbamoyl-3,5-dimethylpyrazole} have been synthesized and characterized by elemental analysis, IR spectroscopy, ¹H and ¹³C{¹H}-NMR experiments. The thermal behavior of the complexes 1–4 has been investigated by means of thermogravimetry (TG) and differential thermal analysis (DTA). From the initial decomposition temperatures, the thermal stability of the complexes can be ordered in the sequence: 3 < 4 ≡ 2 < 1. The final products of the thermal decompositions were characterized as metallic palladium by X-ray powder diffraction.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Isothermal solubility diagram of the 2Na<Superscript>+</Superscript>,Mg<Superscript>2+</Superscript>‖2Cl<Superscript>−</Superscript>, 2ClO<Stack><Subscript>3</Subscript><Superscript>‒</Superscript></Stack>-H<Subscript>2</Subscript>O quaternary system at 20 and 100°C

The solubility in the 2Na⁺,Mg²⁺‖2Cl⁻, 2ClO₃⁻-H₂O system was studied at 20 and 100°C and the solubility diagrams were plotted. New compounds were not found to form in the title quaternary reciprocal system. The sodium chloride field was observed to expand with rising temperature.     

Comparative study of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions adsorption from dimethyl formamide at Hg- and Ga-electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions from their 0.1 M solutions in dimethyl formamide at renewable liquid Hg- and Ga-electrodes was studied under similar experimental conditions by the differential-capacitance and jet-electrode methods. The data obtained points out to a strong effect of the metal nature on adsorption parameters and the halogenide-ion surface activity series. The halogenide-ion surface activity at the Hg-electrode increased in the following sequence: Cl⁻ < Br⁻ < I⁻; at the Ga-electrode, in the reverse sequence: I⁻ < Br⁻ < Cl⁻. The results are explained qualitatively in terms of the Andersen-Bockris model. It follows from the obtained data that (1) the free energy of the metal-halogenide-ion interaction increases in the following sequence: I⁻ < Br⁻ < Cl⁻; (2) the free energy of the Ga-halogenide-ion interaction exceeds that of the Hg⁻halogenide-ion interaction; and (3) the difference of the Cl⁻, Br⁻, and I⁻ ions interaction with the metals increased significantly when passing from Hg⁻ to Ga-electrode.     

Single-phased white-light emitting CaAl<Subscript>2</Subscript>Si<Subscript>2</Subscript>O<Subscript>8</Subscript>: Eu<Superscript>2+</Superscript>, Mn<Superscript>2+</Superscript> phosphors prepared by a sol–gel method

CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors have been prepared by a sol–gel method. X-ray diffractometer, spectrofluorometer and UV–Vis spectrometer were used to characterize structural and optical properties of the samples. The results indicate that anorthite (CaAl₂Si₂O₈) directly crystallizes at 1000 °C in the sol–gel process. CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors show two emission bands excited by ultraviolet light. Blue (around 415 nm) and yellow (around 575 nm) emissions originate from Eu²⁺ and Mn²⁺, respectively. With appropriate tuning of Mn²⁺ content, CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors exhibit different hues and relative color temperatures.     

Studies on structure and electrochemical properties of pillared M–MnO<Subscript>2</Subscript> (M=Ba<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript>, ZrO<Superscript>2+</Superscript>)

Supramolecular pillared oxides were prepared through the intercalation of M²⁺ cations into a MnO₂ host matrix by the method of ion exchange between the precursor δ-K _x MnO₂ and the corresponding guest. The materials M-MnO₂ crystallize in the hexagonal system, the same structure as the precursor, with a larger interlamellar spacing. In the case of ZrO-MnO₂, extended X-ray absorption fine structure (EXAFS) determination indicates that the Zr atom locates between the MnO₂ layers forming a stable structure. Compared with the precursor, the cycling property of M-MnO₂ was improved distinctly, while the capacity decreased to some degree due to the strong interaction between pillars and the host matrix. Among these pillared materials, ZrO-MnO₂ has an advanced reversible capacity of 161.5 mAh·g⁻¹ and improved cycling behavior compared with the precursor.     

Structural transformation of silver nanoprisms in aqueous solution initiated by Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions: electrochemical mechanism

It has been found that halide ions (Cl^–, Br^–, and I^–) in aqueous solution initiate structural transformation of silver trigonal prisms (20?50 nm in size) in the sequence prism ? disc ? sphere. It has been demonstrated that the change in structure is caused by the formation of poorly soluble silver salts on nanoprisms and occurs by the electrochemical mechanism. The efficiency of the process is dictated by the nature of the halide ion.     

Comparison study of adsorption of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions from dimethyl formamide on In-Ga and Tl-Ga electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions on the renewable liquid In-Ga and Tl-Ga electrodes from 0.1 M solutions in dimethyl formamide (DMF) is investigated by using the method of differential capacitance measurements. The results are compared with similar data obtained on Hg and Ga electrodes in DMF and with the corresponding data obtained in acetonitrile (AN). It is shown that, in DMF, the adsorption parameters and the series of surface activity of halide ions (Hal⁻) significantly depend on the metal nature. In contrast to Hg electrode, on which the surface activity of halide ions increases in the series: Cl⁻ < Br⁻ < I⁻, on In-Ga, as well as on the Ga electrode, it varies in the reverse order: I⁻ < Br⁻ < Cl⁻, whereas on the Tl-Ga electrode, partially reversed series of surface activity is observed: Br⁻ < I⁻ < Cl⁻. The results are explained within the framework of Andersen-Bockris model. An analysis of experimental results leads to the following qualitative conclusions: (1) on the In-Ga and Tl-Ga electrodes, as well as on Ga electrode, free energy of metal-Hal⁻ interaction ( $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) increases in series I⁻ < Br⁻ < Cl⁻; (2) for Cl⁻, Br⁻, and I⁻, $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) grows in series Tl-Ga < In-Ga < Ga; (3) an absolute magnitude of $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } (Hal₁⁻, and Hal₂⁻ are any ions of Cl⁻, Br⁻, and I⁻) increases in series Hg < Tl-Ga < In-Ga < Ga; (4) the metal-DMF chemisorption interaction is much stronger than the metal-AN interaction and increases in series Tl-Ga < In-Ga < Ga.     

Computational studies of the interactions of I<Superscript>−</Superscript> and I<Subscript>3</Subscript><Superscript>−</Superscript> with TiO<Subscript>2</Subscript> clusters: implications for dye-sensitized solar cells

Abstract  

First principle density-functional theory calculations have been carried out on the interaction of I⁻ and I₃ ⁻ with TiO₂ anatase surfaces, modeled by finite clusters that range in size from 48 to 180 atoms. The total energy per TiO₂ unit and the HOMO-LUMO gaps decrease with increasing the size of the clusters. Both redox species (I⁻ and I₃ ⁻) are strongly adsorbed on the TiO₂ surface with the adsorbtion of I⁻ being stronger. Adsorption of triiodide leads to its dissociation. The positions of the HOMO and LUMO of the adsorbed systems shift negatively from their respective cluster values. Solvation effects have been modeled using the CPCM model. Introducing solvent reduces the shifting of HOMO and LUMO. Implications for dye-sensitized solar cells (DSSC) are discussed. Both the HOMO-LUMO shifting and the strong adsorption might affect the performance of the cell.     

Interaction of [В<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Superscript>2–</Superscript> and [В<Subscript>12</Subscript>H<Subscript>12</Subscript>]<Superscript>2–</Superscript> with nitro compounds

The interaction of the [B₁₀H₁₀]^2– and [B₁₂H₁₂]^2– anions with aliphatic and aromatic nitro compounds (RNO₂, where R = Et, n-Pr, i-Pr, tert-Bu, Ph) has been studied under irradiation with visible and UV light. It has been shown that, depending on the reaction conditions, both mono- and disubstituted nitro-closo-decaborates can be selectively obtained in yields up to 50%.     

Structure and stability of endohedral complexes <Superscript>4/2</Superscript>X@(HAlNH)<Subscript>2</Subscript> (X = N,P, As,C<Superscript>−</Superscript>, Si<Superscript>−</Superscript>)

The structures of a closo-hedral cluster (HAlNH)₁₂ and endohedral complexes ^4/2X@(HAlNH)₁₂ (X = N, P, As, C⁻, Si⁻) are studied by density functional theory (DFT) at the B3LYP/6-31G(d) level. The geometries, natural bond orbital (NBO), vibrational frequency (ν₁), energetic parameters, magnetic shielding constants (σ), and nucleus independent chemical shifts (NICSs) are discussed. It is found that all guest species are minima at the cage center. Inclusion energies (ΔE _inc) of all species are negative except those of ⁴N and ^4/2P. In all species, the endohedral quartet states (⁴X) are energetically less favorable than their doublet states (²X). The calculations predict that caged X states only donate <0.50 e to the cage and preserve their unencapsulated ground states.     

Interactions between AuCl<Subscript>4</Subscript><Superscript>−</Superscript> and CTA<Superscript>+</Superscript> ions in water

The solubility of hexadecyltrimethylammonium tetrachloroaurate (CTA·AuCl₄) in water was measured at different temperatures of 288.2, 293.2, 298.2, 303.2, and 308.2 K. The enthalpy change associated with the formation of the CTA·AuCl₄ precipitate was estimated on the basis of the van’t Hoff equation and was found to be −42.5 ± 2.8 kJ mol⁻¹ at 298.2 K. The calorimetric enthalpy change for the CTA·AuCl₄ precipitate formation was directly determined by isothermal titration calorimetry performed at 298.2 K and was found to agree well with that estimated from the van’t Hoff equation.     

A theoretical study of the interaction between [HB≡CH]<Superscript>−</Superscript>, [H<Subscript>2</Subscript>B=CH<Subscript>2</Subscript>]<Superscript>−</Superscript>, and boratabenzene anions with alkali and alkaline earth metals: properties and structures

The nature of [HB≡CH]⁻, [H₂B=CH₂]⁻, and boratabenzene interactions with alkaline and alkaline earth metals are studied by ab initio calculations. The interaction energies are calculated at the B3LYP/6-311++G(d,p) level. The calculations suggest that the cation size and charge are two influential factors that affect the nature of the interaction. AIM and NBO analyses of the complexes indicate that the variation of densities and the extent of charge transfers upon complexation correlate well with the obtained interaction energies.     

Study on nonlinear kinetic and thermodynamics of oscillating reaction of amino Acid-BrO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>-Mn<Superscript>2+</Superscript>-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-acetone system

With the help of the kinetic parameters (the rate constant (k _in k _p) and the apparent activation energy (E _in E _p) of the oscillatory induction period and oscillation period) of the oscillating reaction using thirteen amino acids, leucine (Leu), threonine (Thr), arginine (Arg), lysine (Lys), histidine (His), alanine (Ala), glutamine (Glu), glycine (Gly), methionine (Met), cystine (Cys), tryptophan (Trp), serine (Ser) and tyrosine (Tyr), as organic substrates in amino acid-BrO₃⁻-Mn²⁺-H₂SO₄-acetone system, then based on the Oregonator model and the thermodynamics theory on irreversible process, the thermodynamic function (ΔH _in, ΔG _in, ΔS _in and ΔH _p, ΔG _p, ΔS _p) of these oscillating system are studied. The results indicate the entropy ΔS of these oscillating reaction are negative, thereby it is proved that the oscillating reaction is a noequilibrium system with dissipation structure in agreement with the character of the oscillating reaction from disorder to order in irreversible thermodynamics. These are satisfactorily to explain the experimental phenomena.     

Preparation and Characteristics of Nb<Superscript>5+</Superscript>, Ta<Superscript>5+</Superscript>/TiO<Subscript>2</Subscript> Nanoscale Powders by Sol–Gel Process Using TiCl<Subscript>3</Subscript>

Nanoscale TiO₂ powders doping with niobium and tantalum were prepared using TiCl₃ as a source matter. Characterization of the materials was performed by Thermoanalys, particle size, XRD, BET, FTIR, Magnetic Susceptibility. The influence of niobium and tantalum ions on the phase transition was studied, the changes in the crystal size and microstain distributions obtained at 400C were analyzed. The results show that the substitutes of Nb^{5 +}, Ta^{5 +} for Ti⁴⁺ in the anatase structure cause distortions and improve to form rutile. When the dopant content is over certain molar percent, biphase reappears. The IR spectra and magnetic susceptibility indicate the Nb–Nb (or Ta–Ta) bonds along c-axis in rutile by two Nb^{5 +} (Ta^{5 +}) ions located in sites adjacent along the c-axis appear with the dopant content. The magnetic characteristics at rutile showed a weak paramagnetism.     

Structural investigation of salts containing ions [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>]<Superscript>2+</Superscript> and [IrF<Subscript>6</Subscript>]<Superscript>2–</Superscript>

Double complex salts (DCS) α-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/m, a = 6.3181(3) Å, b = 10.8718(5) Å, с = 7.4526(4) Å, β = 103.568(2)°), β-[Pd(NH₃)₄][IrF₆]·H₂O (P2₁/с, a = 8.5773(3) Å, b = 10.8791(4) Å, с = = 12.6741(3) Å, β = 122.497(2)°), [Pd(NH₃)₄]₃[IrF₆]₂Cl₂·H₂O (P-1, a = 7.6080(2) Å, b = 7.6274(2) Å, с = 11.8070(3) Å, β = 122.497(2)°), and [Pd(NH₃)₄]₂[IrF₆]NO₃ (Fm-3m, a = 11.21210(10) Å) have been synthesized and structurally characterized for the first time. The existence of polymorphs for the DCS has been revealed. The influence of the chemical composition of the initial reagents on the reaction course and, respectively, the products, has been demonstrated. A hypothesis on the influence of the second coordination sphere on the formation of one or the other polymorph of the DCS has been suggested. It has been shown that the series α-[Pd(NH₃)₄][МF₆]·H₂O (M = Pt, Pd) exhibits isostructurality.     

Electrical conductivity of potassium titanyl phosphate KTiOPO<Subscript>4</Subscript> pure crystals and those doped with Na<Superscript>+</Superscript>, Rb<Superscript>+</Superscript>, and F<Superscript>–</Superscript> ions

KTiOPO₄ crystals, both pure and doped with rubidium Rb⁺ and fluorine F^– ions, were grown in temperature range from 1060 to 846°С from salt solvent containing potassium metaphosphate КРО₃ and potassium orthophosphate К3РО₄ by using a Czochralski modified method. Potassium–sodium titanyl phosphate crystals were obtained from KTiOPO₄ crystals by the potassium isomorphic replacement with sodium; to this purpose, sodium chemical diffusion from NaNO₃ melt was used. Their ionic conductivity was studied by the electrochemical impedance spectroscopy method. The KTiOPO₄ crystal doping with rubidium and sodium ions was shown to lower the conductivity, whereas the doping with fluorine ions results in increased conductivity.     

Mercury complex [(HOCH<Subscript>2</Subscript>)<Subscript>3</Subscript>CNH<Subscript>3</Subscript>]<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> [HgI<Subscript>4</Subscript>]<Superscript>2−</Superscript>: Synthesis and structure

The complex [(HOCH₂)₃CNH₃] ₂ ⁺ [HgI₄]^2? (I) was synthesized by reacting (trioxymethyl)methylammonium iodide with mercury dioide (2: 1 mol/mol) in acetone. X-ray crystallography shows that the complex consists of two types of crystallographically independent [(HOCH₂)₃CNH₃]⁺ cations and tetrahedral anions [HgI₄]^2? (IHgI, 106.49(2)°–113.99(4)°; Hg-I, 2.7849(8)-2.8105(8) Å. [(HOCH₂)₃CNH₃]⁺ cations are linked via hydrogen bonds O…H-N and O-H…N (O…N, 2.84–2.92 Å) to form polymer chains, which are cross-linked with one another via anions (I…H, 2.81, 2.82 Å).