A new procedure for fast soft staining of BN‐PAGEs on photosynthetic complexes

We report a fast and sensitive procedure for blue native PAGE staining, in which the conventional staining step with CBB is avoided. After running, a short exposure to a mix of polar protic solvents (ethanol and acetic acid) leads to a fast and selective removal of the dye from the migration front and a specific binding to the protein bands, while the rest undergo a selective and complete background removal, leading to an intense contrast. This single‐step staining–destaining technique is useful in protein samples that bind colored cofactors such as photosystems, which can be selectively discerned by their characteristic green color. After the staining of such samples, the green color persists, while the other unpigmented protein complexes and the molecular standard remain CBB stained, creating a useful reference system for the assignment of the bands. The advantages and chemical basis of this staining procedure are discussed.     

Systematic comparison of technical details in CBB methods and development of a sensitive GAP stain for comparative proteomic analysis

Considering the importance of CBB staining in visualizing proteins in 2-DE gels, any improvement in the existing protocols with high sensitivity and good MS compatibility is of significant importance. In this study, we systematically evaluated the effects of different staining parameters on CBB methods by 1-DE and 2-DE, and demonstrated that G-250 was more suitable for visualizing low-abundant proteins as well as generating more spots than R-250, whereas R-250 had a superior capability for quick staining of high-abundant proteins. The staining produced by mixing G-250 and R-250 in different ratios showed similar sensitivity. Compared with acetic acid, phosphoric acid produced more protein spots. Ammonium-based stain demonstrated a superior sensitivity than the aluminum-based one. Based on these findings, a new protocol using CBB G-250, ammonium sulfate and phosphoric acid (GAP) was developed by incorporating the fixation, sensitization and staining procedures together. The comparison of GAP with other methods revealed that GAP generated more protein spots and had wider applications. The identification of 11 proteins demonstrated that GAP was not only compatible with MS but also obviously reduced in vitro protein modification, and thus could be a preferable protocol in the future proteomic analysis.     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.     

Improved conditions for fluorescent staining of proteins with 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid in SDS‐PAGE

A simple and sensitive fluorescent staining method for the detection of proteins in SDS‐PAGE, namely IB (improved 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid) stain, is described. Non‐covalent hydrophobic probe 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid was applied as a fluorescent dye, which can bind to hydrophobic sites in proteins non‐specifically. As low as 1 ng of protein band can be detected briefly by 30 min washing followed by 15 min staining without the aiding of stop or destaining step. The sensitivity of the new presented protocol is similar to that of SYPRO Ruby, which has been widely accepted in proteomic research. Comparative analysis of the MS compatibility of IB stain and SYPRO Ruby stain allowed us to address that IB stain is compatible with the downstream of protein identification by PMF.     

CBB staining protocol with higher sensitivity and mass spectrometric compatibility

Various CBB‐based methods for staining proteins separated by 2‐D gel electrophoresis were compared with regard to sensitivity and resolution. A modified Kang's CBB staining protocol, which we have modified, includes phosphoric acid in a concentration of 8% instead of the original 2%. This proved to be the best approach. Protein amounts as low as 2 ng and ∼2300 spots in the gel can be detected by employing this protocol. The modified procedure takes less time to carry out. Moreover, this practice is more sensitive and resolves more protein spots than most protocols reported to date and is compatible with subsequent mass spectrometric analysis.     

RAMA casein zymography: Time‐saving and highly sensitive casein zymography for MMP7 and trypsin

To detect metalloproteinase‐7 (MMP7), zymography is conducted using a casein substrate and conventional CBB stain. It has disadvantages because it is time consuming and has low sensitivity. Previously, a sensitive method to detect MMP7 up to 30 pg was reported, however it required special substrates and complicated handlings. RAMA casein zymography described herein is rapid, sensitive, and reproducible. By applying high‐sensitivity staining with low substrate conditions, the staining process is completed within 1 h and sensitivity was increased 100‐fold. The method can detect 10 pg MMP7 by using commercially available casein without complicated handlings. Moreover, it increases detection sensitivity for trypsin.     

Increased sensitivity for Coomassie staining of sodium dodecyl sulfate-polyacrylamide gels using PhastSystem Development Unit

Staining of proteins in PhastGel gradient media with Coomassie Blue R 350 was considerably improved using a lower concentration of methanol (10% v/v) and 2% ammonium sulfate in the staining solution and 10% acetic acid for destaining. The detection limit in sodium dodecyl sulfate-polyacrylamide gels was lowered by a factor of 10 to about 2 ng per protein band. The Coomassie staining method was adapted to the newly developed silver staining procedure so that both can be used in parallel in PhastSystem.     

A rapid and simple 8‐quinolinol‐based fluorescent stain of phosphoproteins in polyacrylamide gel after electrophoresis

In order to obtain an easy and rapid protocol to visualize phosphoproteins in SDS‐PAGE, a fluorescent detection method named 8‐Quinolinol (8‐Q) stain is described. 8‐Q can form ternary complexes in the gel matrix contributed by the affinity of aluminum ion (Al³⁺) to the phosphate groups on the proteins and the metal chelating property of 8‐Quinolinol, exhibiting strong fluorescence in ultraviolet light. It can visualize as little as 4～8 ng of α‐casein and β‐casein, 16～32 ng of ovalbumin and κ‐casein which is more sensitive than Stains‐All but less sensitive than Pro‐Q Diamond. The protocol of 8‐Q requires only 70 min in 0.75 mm mini‐size or 1.0 mm large‐size gels with five changes of solutions without destaining step; Pro‐Q takes at least 250 min with 11 changes of solutions. In addition, the new method was confirmed by the study of dephosphorylation and LC‐MS/MS, respectively. The approach to visualize phosphoprotein utilizing 8‐Q could be an alternative to simplify the analytical operations for phosphoproteomics research.     

High-sensitivity staining of proteins for one- and two-dimensional gel electrophoresis using post migration covalent staining with a ruthenium fluorophore

This paper describes the use of a ruthenium complex ((bis(2,2'-bipyridine)-4'-methyl-4-carboxybipyridine-ruthenium-N-succidimyl ester-bis(hexafluorophosphate), abbreviated below as ASCQ_Ru) commercially available and chemically pure. This new ruthenium complex ASCQ_Ru brings an activated ester, allowing the selective acylation of amino acid side chain amines for the post migration staining of proteins separated in 1-DE and 2-DE. The protocol used is a simple three-step protocol fixing the proteins in the gel, staining and then washing, as no lengthy destaining step is required. First the critical staining step was optimized. Although in solution the best described pH for acylating proteins with this reagent is phosphate buffer at pH 7.0, we found that best medium for in-gel staining is unbuffered ACN/water solution (20/80 v/v). The two other steps are less critical and classical conditions are satisfactory: fixing with 7% acetic acid/10% ethanol solution and washing four times for 10 min with water. Sensitivity tests were performed using 1-DE on protein molecular weight markers. We obtained a higher sensitivity than SYPRO Ruby with a detection limit of 80 pg of protein per well. However, contrary to SYPRO Ruby, ASCQ_Ru exhibits a logarithmic dependency on the amount of protein. The dynamic range is similar to SYPRO Ruby and is estimated between three and four orders of magnitude. Finally, the efficiency of the post migration ASCQ_Ru staining for 2-D gel separation is demonstrated on the whole protein extract from human colon carcinoma cells lines HCT 116. ASCQ_Ru gave the highest number of spot detected compared to other common stains Colloidal CBB, SYPRO Ruby and Deep Purple.     

Fast and sensitive protein staining with colloidal acid violet 17 following isoelectric focusing in carrier ampholyte generated and immobilized pH gradients

A new method is described for fast and sensitive staining of proteins following isoelectric focusing in carrier ampholyte and immobilized pH gradient polyacrylamide gels. After fixation with trichloroacetic acid the gels are stained for 5-10 min with 0.1-0.2% colloidal Serva Violet 17 (generic name: Acid Violet 17; Color Index No. 42,650) in 10% w/v phosphoric acid. After staining for only 0.5-3 min, major zones, corresponding to 100-500 ng protein, are visible without destaining on a weak background. Detection of minor components requires destaining with 3% w/v phosphoric acid for 5-80 min depending on gel thickness (120-500 microns) and type of support (fabric reinforced versus gels backed to a polyester film). For selected pH marker proteins (bovine serum albumin, carbonic anhydrase, horse myoglobin) a staining sensitivity of 1-2 ng/mm2 protein is found. Dye elution from stained fabric reinforced gels with 50% v/v dioxane-water, followed by absorbance measurements, results in a linear relationship over a range of 1-100 micrograms marker proteins. Staining with collodial Serva Violet 17 is the only method available for fast and high sensitivity and low background staining of immobilized pH gradient gels, without interference from selective dye binding in different pH ranges. Staining with the collodial dye is convenient by avoiding organic solvents with unpleasant vapors and potentially hazardous.     

Usefulness of visible dyes for the staining of protein or DNA in electrophoresis

Since 1993, we have studied visible organic dye stains for protein or DNA to improve methodologies and developed the counterion dye staining method. The method employs two oppositely charged dyes that form an ion-pair complex in the staining solution. The selective binding of free dye to protein or DNA in the staining solution improves detection sensitivity and speed. It is a rapid and sensitive procedure, involving fixing/staining or staining/quick destaining steps that are completed in 1-1.5 h. The lowest detection limits achieved are 4-8 ng of protein on polyacrylamide gels and approximately 10 ng of DNA on agarose gels. The focus of this review is to chronicle the development and current status of the counterion dye staining method for detection of protein or DNA. As an extended application of visible dyes, we also discuss the visible dye staining method for detecting protein on blotting membranes developed in our laboratory.     

Fast fluorescent staining of protein in sodium dodecyl sulfate polyacrylamide gels by palmatine

A fast and sensitive protein fluorescent detection method in SDS-PAGE using the natural product palmatine is described. Palmatine is an alkaloid found in various plants exhibiting a broad spectrum of antibiotic activity in humans. The sensitivity of palmatine staining is similar to those of the SYPRO Red, SYPRO Tangerine, and SYPRO Orange protein gel stains - about 4 ng per protein band. This detection sensitivity is comparable to colloidal CBB staining. Since proteins stained with palmatine do not need destaining, the staining procedure can be easily shortened and completed in about 30 min. Stained proteins can be photographed using a UV transilluminator. The results of the present study suggest that the palmatine staining is sensitive, rapid, low cost, and safe for a broad application to the research of protein.     

Recovery of intact proteins from silver stained gels

Silver stained proteins of a wide molecular weight (MW) range (20-116 kDa) were successfully recovered by both electroblot and electroelution. The recovery was demonstrated for nanogram loads of proteins separated by SDS-PAGE and visualized by silver staining methods compatible and incompatible with mass spectrometry (MS). It was shown that the alcohol/acid and glutaraldehyde fixation steps present in a number of staining procedures did not prevent recovery of intact proteins from gels. It was found that the recovery of intact proteins from silver stained gels was substantially increased upon pre-equilibration in a buffer containing the reducing agent, dithiothreitol (DTT). The effect of destaining on the recovery of silver stained proteins was also investigated. Comparable recovery of intact proteins within a wide MW range from silver stained gels with and without destaining step was demonstrated. Recovery of model proteins from gels visualized using silver staining method compatible with MS showed 52 to 76% yield of that from the unstained gel, depending upon method of the transfer. Comparison of the recovery of intact proteins from gels visualized using other staining procedures was also made. The above findings have implications as to the supposed irreversible nature of protein "fixation" inside polyacrylamide matrix, and confirm lack of binding of proteins in the gel to metal silver deposited on its surface. This method has the potential to be suitable for direct characterization of proteins by matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) without additional purification steps.     

High-efficiency protein extraction from polyacrylamide gels for molecular mass measurement by matrix-assisted laser desorption/ionization-time of flight-mass spectrometry

A simple and fast method of protein extraction from Coomassie Brilliant Blue (CBB)-stained polyacrylamide gels suited for molecular mass measurement of proteins by matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) is reported. Proteins in CBB-stained gel pieces were extracted by a 10-min soaking in 0.1 M NaOH at 25 degrees C. The recovery of this one-step extraction method was 34-73% for proteins <67 kDa. CBB adduction to proteins during mass spectrometric analysis was avoided by a destaining step before the alkaline extraction. The molecular mass values of the extracted proteins coincided with those of purified proteins within +/-0.01-0.10% deviation for all the proteins <36 kDa. Because of the high extraction recovery, mass measurement was possible for the proteins extracted from CBB-stained gels with loaded protein quantities as little as 34 ng for cytochrome c, alpha-lactalbumin, myoglobin, beta-lactoglobulin, trypsinogen, and carbonic anhydrase (12.4-29.0 kDa), 340 ng for glyceraldehyde-3-phosphate dehydrogenase (35.6 kDa) and albumin (66.3 kDa). This method provides a highly efficient approach to utilize CBB-stained one- or two-dimensional gels for whole protein analysis using MALDI-TOF-MS.     

A sensitive LC‐MS/MS method for the simultaneous determination of amoxicillin and ambroxol in human plasma with segmental monitoring

Amoxicillin (AMO) degrades in plasma at room temperature and readily undergoes hydrolysis by the plasma amidase. In this paper, a novel, rapid and sensitive LC‐MS/MS method operated in segmental and multiple reaction monitoring has been developed for the simultaneous determination of amoxicillin and ambroxol in human plasma. The degradation of amoxicillin in plasma was well prevented by immediate addition of 20 μL glacial acetic acid to 200 μL aliquot of freshly collected plasma samples before storage at ?80°C. The sensitivity of the method was improved with segmental monitoring of the analytes, and lower limits of quantitation of 0.5 ng/mL for ambroxol and 5 ng/mL for amoxicillin were obtained. The sensitivity of our method was five times better than those of the existing methods. Furthermore, the mass response saturation problem with amoxicillin was avoided by diluting the deproteinized plasma samples with water before injection into the LC‐MS/MS system. The method was successfully employed in a pharmacokinetic study of the compound amoxicillin and ambroxol hydrochloride tablets. Copyright © 2012 John Wiley & Sons, Ltd.     

Practical aspects of fluorescent staining for proteomic applications

SYPRO Orange and SYPRO Ruby staining methods, modified for use with large-format two dimensional (2-D) gels, are compared to the manufacturer's recommended protocols to determine sensitivity and reproducibility of the new methods. This study examines the critical aspects of fixation, washing, and staining to develop an optimized fluorescent staining method. It was determined that careful control of sodium dodecyl sulfate (SDS) levels and pH in the gel was critical for successful staining with SYPRO Orange. Overnight fixation in 40% ethanol/2% acetic acid/0.0005% SDS preserved protein content, eliminated ampholyte-generated staining artifacts, and had no detrimental effects on staining. Three one-hour washes in 2% acetic acid/0.0005% SDS, followed by staining with SYPRO Orange diluted 1:5,000 with washing solution for 3 or more hours, produced high sensitivity, low background images using a STORM 860 laser scanner. Gels viewed two years after staining showed no significant changes with respect to the initial protein patterns, and allowed successful mass spectrometric postgel characterization of protein spots. Protocol changes applied to SYPRO Ruby staining improved the contrast of STORM 860-generated images, but had little impact on staining sensitivity. A comparison of the cost benefits of staining with SYPRO Orange vs. SYPRO Ruby is also discussed.     

Design and synthesis of new fluorescent probe for rapid and highly sensitive detection of proteins via electrophoretic gel stain

A new fluorescent molecular probe, 2,2′‐(1E,1′E)‐2,2′‐(4‐(dicyanomethylene)‐4H‐pyrane‐2,6‐diyl)bis(ethene‐2,1‐diyl)bis(sodium benzenesulfonate) salt ( 1 ), possessing the cyanopyranyl moieties and two benzene sulfonic acid groups was designed and synthesized to detect proteins in solution and for high‐throughput SDS‐PAGE. Compound 1 exhibited no fluorescence in the absence of proteins; however, it exhibited strong fluorescence on the addition of bovine serum albumin as a result of intramolecular charge transfer. Compared with the conventional protocols for in‐gel protein staining, such as SYPRO Ruby and silver staining, 1 achieves higher sensitivity, even though it offers a simplified, higher throughput protocol. In fact, the total time required for protein staining was 60–90 min under optimum conditions much shorter than that required by the less‐sensitive silver staining or SYPRO Ruby staining protocols. Moreover, 1 was successfully applied to protein identification by mass spectrometry via in‐gel tryptic digestion, Western blotting, and native PAGE together with protein staining by 1 , which is a modified protocol of blue native PAGE (BN‐PAGE). Thus, 1 may facilitate high‐sensitivity protein detection, and it may be widely applicable as a convenient tool in various scientific and medical fields.     

Determination of 3-hydroxy pterocarpan, a novel osteogenic compound in rat plasma by liquid chromatography-tandem mass spectrometry: application to pharmacokinetics study

A rapid, sensitive and selective LC‐MS/MS method for the quantitative analysis of 3‐hydroxy pterocarpan (S006‐1709) in female rat plasma has been developed and validated. A Discovery RP₁₈ column was used for the chromatographic elution using acetonitrile and 0.1% acetic acid in water as mobile phase (80:20 v/v) at the flow rate of 0.5 mL/min. MS/MS analysis was performed using a triple quadrupole mass spectrometer with electrospray ionization in negative ion mode using biochanin as an internal standard (IS). Extraction of S006‐1709 and IS from rat plasma was done by liquid–liquid extraction method using diethyl ether. The LC‐MS/MS method was sensitive with 1.95 ng/mL as the limit of detection and 3.9 ng/mL as the lower limit of quantification. The method was linear in the concentration range of 3.9–1000 ng/mL. The percentage bias for intraday and interday accuracy was not greater than 4.2 and the %RSD for intraday and interday precision was not greater than 13.2. The recoveries of S006‐1709 and IS were 73.9–79.3 and 85.7%, respectively. S006‐1709 was found to be stable in various stability studies. The validated LC‐MS/MS method was successfully applied for the oral pharmacokinetics study of S006‐1709 at 10 mg/kg in female Sprague–Dawley rats. Copyright © 2010 John Wiley & Sons, Ltd.     

Fluorescence detection of proteins in sodium dodecyl sulfate-polyacrylamide gels using environmentally benign, nonfixative, saline solution

SYPRO Tangerine stain is an environmentally benign alternative to conventional protein stains that does not require solvents such as methanol or acetic acid for effective protein visualization. Instead, proteins can be stained in a wide range of buffers, including phosphate-buffered saline or simply 150 mM NaCl using an easy, one-step procedure that does not require destaining. Stained proteins can be excited by ultraviolet light of about 300 nm or with visible light of about 490 nm. The fluorescence emission maximum of the dye is approximately 640 nm. Noncovalent binding of SYPRO Tangerine dye is mediated by sodium dodecyl sulfate (SDS) and to a lesser extent by hydrophobic amino acid residues in proteins. This is in stark contrast to acidic silver nitrate staining, which interacts predominantly with lysine residues or Coomassie Blue R, which in turn interacts primarily with arginine and lysine residues. The sensitivity of SYPRO Tangerine stain is similar to that of the SYPRO Red and SYPRO Orange stains - about 4-10 ng per protein band. This detection sensitivity is comparable to colloidal Coomassie blue staining and rapid silver staining procedures. Since proteins stained with SYPRO Tangerine dye are not fixed, they can easily be eluted from gels or utilized in zymographic assays, provided that SDS does not inactivate the protein of interest. This is demonstrated with in-gel detection of rabbit liver esterase activity using alpha-naphthyl acetate and Fast Blue BB dye as well as Escherichia coli beta-glucuronidase activity using ELF-97 beta-D-glucuronide. The dye is also suitable for staining proteins in gels prior to their transfer to membranes by electroblotting. Gentle staining conditions are expected to improve protein recovery after electroelution and to reduce the potential for artifactual protein modifications such as the alkylation of lysine and esterification of glutamate residues, which complicate interpretation of peptide fragment profiles generated by mass spectrometry.     

A simple system for staining protein and nucleic acid electrophoresis gels

Researchers in molecular biology spend a significant amount of time tending to the staining and destaining of electrophoresis gels. Here we describe a simple system, costing approximately $100 and taking approximately 1 h to assemble, that automates standard nucleic acid and protein gel staining protocols. Staining is done in a tray or, with DNA gels, in the electrophoresis chamber itself following automatic detection of the voltage drop. Miniature pumps controlled by a microcontroller chip exchange the necessary solutions at programmed time intervals. We demonstrate efficient and highly reproducible ethidium bromide and methylene blue staining of DNA in agarose gels and Coomassie blue and silver staining of proteins in polyacrylamide gels.