Monolayers of methacrylic polymers containing aromatic groups

Monolayers of poly-methacrylates containing either aromatic or linear side groups were studied at the air-water interface. The aim of the work is to define the role of the aromatic group in determining the interfacial distribution and orientation of these polymers. Surface pressure measurements show that all the polymers give stable expanded monomolecular films between 288 K and 308 K temperature range.Surface potential and ellipsometric measurements show that both aromatic and aliphatic polymers are in an almost horizontal conformation at the liquid-air interface. From a comparison of the experimental isotherms with Huggins' theory, it was deduced that no preferential interactions exist between benzene rings in the film. In contrast, preferential attractive energies are observed for n-alkylmethacrylates.Further information on the state of the collapsed film was obtained from electron scanning micrographs.     

Interaction of polysilicic acid with monolayers of substances containing quaternary ammonium groups

The action of polysilicic acid on monolayers of a quaternary ammonium salt and a phospholipid spread on substrates of various pH values was studied. The films of benzyl dimethyl hexadecyl ammonium chloride were considerably affected above pH 2. No interaction was observed, at any pH, between silicic acid and dipalmitoyl phosphatidyl serine.The results support the existence of ionic interactions between dissociated silanol groups and tetra-alkylammonium groups. The involvement of hydrogen bonds is ruled out.     

Mixed monolayers of polypeptides

Mixed monolayers of two polypeptides, poly--methyl-L-glutamate and poly-L-alanine in the same-helix surface conformation, were studied at the water/air interface.From a comparison of the experimental-A isotherms with Huggins' theory and from the examination of the MIR spectra for the two components and their mixtures, it was possible to deduce that poly--methyl-L-glutamate and poly-L-alanine were totally miscible at the surface with prevalently attractive interactions and that the mixtures maintained the conformation of the two components.The low values of the interaction parameters, deduced by applying Joos' theory to the collapse pressures of the mixtures, demonstrated that the interactions were prevalently hydrophobic     

Surfactant monolayers on a clean mercury surface: Apparatus and experiments

A Langmuir trough for studying monolayers on a mercury surface was constructed usingT. Smith's design. The surfactant (long-chain alkyl-trimethylammonium compounds) in aqueous solution were spread on a clean mercury surface in an atmosphere of helium, and the surface pressure re-areaA and thickness of surface filmd-areaA curves were obtained. The-A curves were characterized by the appearance of multiple inflection points and plateaus, being explained as stepwise dense surface packing of molecules, and the formation of multilayers by film compression with long axes of molecules lying flat on the mercury surface.     

Lipolysis of didecanoyl-lecithin/triolein mixed monolayers by phospholipaseA 2

A study of enzyme lipolysis by pancreatic phospholipaseA ₂ and by vipera berus phospholipaseA ₂ on monomolecular mixed films of didecanoyl-lecithin and triolein on an aqueous subphase of pH 8 has been carried out. The influence of the composition of the mixed film, the surface pressure of the film and the amount and type of the injected enzyme on the lipolysis rate were studied.In order to relate the lipolytic activity with the monolayer state, the compression isotherms of the didecanoyl-lecithin/triolein mixed monolayers have also been obtained.The resuls are compared to observations on lipolytic activity of phospholipaseA ₂ on the didecanoyl-lecithin/cholesterol mixed monolayers. Triolein improves the kinetic conditions of the lipolysis of lecithin films in a higher degree than cholesterol. Probably it increases the enzyme penetration by the fluidifying effect exerted on the lecithin monolayers.     

Mixed monolayers composed of PC/PS/Chol. Interaction with opioid molecules

The miscibility of phosphatidylserine, phosphatidylcholine, and cholesterol in monolayers were studied. The influence of sodium and calcium ions in this system was determined. The compression isotherms of mixed monolayers of the above cited three components spread on subphases containing opiate molecules are elucidated. Moreover, the penetration kinetics of opiate molecules in these mixed monolayers was also recorded. The results show that the presence of cholesterol always lowers the penetration of opioid molecules; this effect is weaken for meperidine, the most hydrophobic of the molecules assayed.Abreviations PS phosphatidylserine - PC phosphatidylcholine - PI phosphatidylinositol - Chol cholesterol     

Molecular properties of acetone and some of its chloroderivatives adsorbed at the surface of water

The relations between the electric surface potential (V) and the surface tension () of aqueous solutions of acetone, chloroacetone, 1,3-dichloroacetone, and their concentration were investigated. The vertical components of dipole moments of the above mentioned compounds were determined using the Helmholtz equation. The calculations were carried out on the basis of surface excess values, which were obtained from surface tension measurements and surface potential changes. Once the vertical component of dipole moments were found and the orientation of adsorbed molecules was assumed, the local dielectric permittivities of the surface monolayer were estimated.     

Interaction of Na+, K+, Li+ and Ca2+ ions in Tris-HCl buffer substrate with monolayers of phosphatidic acid and homologous phosphatidic acid alkyl esters

The interaction of ions (Na⁺, K⁺, Li⁺, Ca²⁺) with monolayers of phosphatidic acid alkyl esters (alkyl = methyl, ethyl,n-propyl,n-pentyl) were investigated at the air/water interface on Tris-HCl buffer, as well as on the electrolytes containing subphases.Qualitatively it can be stated that there are no considerable interactions between Na⁺ ions in the substrate and the head groups of phosphatidic acid esters in the monolayers. On the whole, the modification of the shape in the /a and v/a isotherms ( ^s = film pressure, v ^s = film potential) of the homologous phosphatidic acid esters as a function of the length of the ester group on the subphase containing NaCl, KCl, and LiCl corresponds to that on Tris-HCl buffer without admixture of electrolytes.On the other hand the strength of interaction between Ca²⁺ ions and the homologous phosphatidic acid esters depends on the length of the ester group. The film-condensing effect of Ca²⁺ ions becomes smaller with increasing length of the ester group.     

Azeotropic transformation in mixed monolayers of octadecylurea and hexadecylurea

The surface pressure of mixed monolayers of octadecylurea and hexadecylurea has been measured as a function of mean area per molecule at various temperatures and compositions. The surface pressure of the phase transition obtained was observed to decrease both with an increase in temperature and with an addition of another component. With the aid of the thermodynamic method developed previously, the apparent molar entropy and energy changes associated with the phase transition were found to be positive. These positive values were explained by the rupture of the intermolecular hydrogen bonding. Furthermore, the activity coefficients of film-forming components with reference to their respective pure components were considered in connection with the mutual interaction between octadecylurea and hexadecylurea molecules. It was concluded that the system exhibits the negative azeotropy as a result of the difficulty in forming the hydrogen bonding in the mixed monolayer.     

Functionalization of colloidal silica and silica surfaces via silylation reactions

A series of trialkoxysilane compounds tipped with primary amine groups were used to functionalize the surfaces of glass and colloidal silica. Streaming potential and microelectrophoretic mobility measurements were used to monitor the stability of the functionalized surfaces.Hydrolytic breakdown of the surface-to-silane coupling was induced by either successively increasing and decreasing the pH of the solution in contact with the surface, or by aging the derivatised surfaces in aqueous solution over prolonged periods of time. The chemistry of the spacer units between the trialkoxysilane group and the primary amine tip had a major influence on the subsequent hydrolytic stability. Large hydrophobic spacer groups showed small changes in the electrokinetic properties on storage, but large changes when successively titrated with acid and base through the pH range. The behavior observed with small hydrophobic spacer groups was that large changes in electrokinetic properties were obtained on storage and with pH titration.     

Polypeptides mixed monolayers: collapse mechanism

The mechanism of the collapse process of monolayers of poly-L-alanine and of its mixtures with poly--methyl-L-glutamate was studied at the water/air interface at temperatures of 15°, 20°, 25°, and 30 °C.From measurements of the collapse surface pressure as a function of molar ratios and from the determination of the collapse kinetics, as well as from ellipsometrical measurements of the thickness of the film, the complete solubility of the components, even in the collapsed phase, was deduced.Furthermore, activation energies and values ofG*,H*, andS* in relationship to the kinetics of this process were deduced; it was shown that this process is constituted of a first phase of nucleation and of a second phase of growth both for the poly-L-alanine alone and for its mixtures with poly--methyl-L-glutamate.     

Donator acceptor behavior of aerosil in several organic liquids

Aerosil is studied with regards to its acceptor behavior by means of electrokinetic measurements and UV measurements in various organic liquids. Whereas the values of the general negativ zeta-potential only approximately correspond with the donor number of the liquids determined according to Gutmann, Marie and Gal, and Kravtzov et al., an excellent agreement between zeta-potential and the UV maximum of a dicyano-bis(1,10-phenanthrolin)-ferric [Fe(phen)₂(CN)₂] complex adsorbed at the solid-liquid interface was found. The fact that traces of water decrease the negative zeta-potential of aearosil in organic liquids is attributed to hydration of the aerosil surface.Dedicated to Professor Dr. Josef Schurz on the occasion of his 65th birthday.     

Catalase monolayers at the air/water interface I. Reversibilities and irreversibilities

/A-isotherms of catalase monolayers established at the air/water-interface are discussed quantitatively on the basis of molecular data: A relationship between a critical value of the surface pressure, the corresponding molecular area, and the molecular dimension of the molecules at the interface is proposed. It is shown that the unfolding of molecules at the water surface is pH-dependent. For each pH-value there is a distinct degree of unfolding; the molecules keep their globular state at neutral pH. Establishment at the surface of bulk solutions corresponding to globular and partly unfolded states, respectively, catalase molecules keep their original configuration on changing the pH-value of bulk-phase. The monolayers are confirmed to show reversibility with regard to lateral changes of state as well as irreversibility with respect to desorption of molecules.A model is proposed to explain the nature of the critical/A-value occurring in the/A-isotherms: on compression beyond _c, molecular segments are transferred from the surface into the bulkphase via a subsurface layer. From the experiments it is concluded that the surface pressure is determined, not only by the surface itself, but also by this subsurface layer.     

Cholesterol-dipalmitoyl cephalin and cholesterol-dilauroyl cephalin monolayers spread on silicic acid substrates

Mixed cholesterol-dipalmitoyl cephalin and cholesterol-dilauroyl cephalin monolayers are slightly more expanded on silicic acid substrates than on silica-free substrates. Plotting the mean molecular area of the mixed monolayers against the mole fraction of cephalin shows that cholesterol produces condensation of the cephalin monolayer whether or not the substrate contains silicic acid, and the more expanded the pure phospholipid film, the greater is the condensation produced. These phenomena have been tentatively interpreted in terms of hydrophobic interactions between hydrocarbon chains and electrostatic interactions between the horizontally oriented polar groups of the cephalin molecules.     

Swelling of sodium acrylate gels

The swelling process of sodium acrylate gel is experimentally investigated. It is found that sodium acrylate gels weakly crosslinked with N,N-methylene-bis-acrylamide may undergo volume phase transition and that different kinds of mechanical instabilities occur in sequence at the transition. Peculiar wrinkle patterns appear on the free surface of an unstable gel and are changed in geometry as swelling proceeds. Cellular patterns seen at various instances in the late period of swelling are ascertained to be geometrically similar to each other and different only in size. The radii of spherical acrylate gels allowed to swell in water are measured as functions of time. The results are discussed and compared with the kinetic theories of swelling. As a result, these theories are proved to be unsatisfactory to fully describe the experimental facts.     

Internal and interfacial structure of small vesicle in aqueous colloid of didodecyldimethylammonium bromide

The vesicle structure and interfacial structure of a two-chain amphiphile didodecyldimethylammonium bromide (DMA) in aqueous colloid have been studied by small-angle x-ray scattering. The radius of the DMA small vesicle is ca. 64 Å, and the thickness of the bilayer, which is the surface layer of the vesicle, is ca. 41 Å. The small vesicle has a core space at the center, whose radius is ca. 23 Å. The specific inner surface of the small vesicle has also been calculated and the surface area of the vesicle has been estimated to be five times larger than that of the smooth sphere.     

The action of indomethacin on neutral and positively charged monolayers

The penetration ability of indomethacin in neutral and positively charged monolayers has been studied. Neutral monolayers of cholesterol and dipalmitoyl phosphatidyl choline present a slight but significant increase of surface pressure. The presence of stearylamine in the films results in an increase of surface pressure due to an electrostatic effect between the carboxylic anion of indomethacin and the polar head group of the stearylamine. These values can afford a reference point to choose the best lipid composition of liposomes encapsulating indomethacin to avoid the drug causing leakage of liposomes.     

Preparation of muscovite with ultrahigh specific surface area by chemical cleavage

The specific surface area of a muscovite sample increases drastically after exposure to a LiNO₃ solution, e.g., from 3.4 m²/g, corresponding to platelets of ca. 200 silicate layers, to 295 m²/g (platelets of ca. 2–3 silicate layers) after treatment at 180°C under atmospheric pressure for 46 h. The efficiency of the cleavage process decreases with decreasing temperature (down to 50°C). The LiNO₃/H₂O weight ratio is also very important: at 130°C and a reaction time of 46 h, for instance, a value in the range of 1.7–1.8 leads to the highest specific surfaces. The cleaved products have the form of strong papers that disperse readily in water. During the cleaving procedure, not only the particle thickness, but also the diameter decreases. There is no evidence of damage or partial dissolution of the silicate structure after cleavage, by IR spectroscopy and yield. The use of LiCl also leads to an increase in specific surface area, but the effect is weaker than in the case of LiNO₃. Treatment with some other alkaline and alkaline earth nitrates and chlorides did not increase the specific surface area of muscovite significantly.     

Measurement of interaction forces between crossed quartz glass rods in presence of adsorbed macromolecules

The interaction energy-distance curves of fractionated and unfractionated homo- and copolymers were measured. The results were compared quantitatively with the HVO theory. It was found that only a small number of segments per tail are necessary to obtain stability. The experimental energy-distance curves for low molecular weights are described sufficiently well by the HVO theory, with exponentional distribution of tail sizes. For high molecular weights the exponential distribution cannot be considered as a reasonable assumption because the number of segments in the tails is very low.Polydisperse samples of PVA with different contents of acetate groups, and similar molecular weight, indicate an increasing extension of the adsorbed polymer layer with decreasing acetate content.     

Steric repulsion of polyoxyethylene groups for emulsion stability

Rapid coalescence was studied on liquid paraffin emulsion stabilized with a series of poly(oxyethylene) dodecyl ethers [C₁₂H₂₅ (EO),n=1, 2, 3, 4, 5, 6, 7, 8] and of poly(oxyethylene) nonylphenyl ethers [C₉H₁₉(EO) _n ,n=2, 4, 5, 6, 12]. The turbidity of emulsion was measured as a function of the solution pHs at constant ionic strength of 0.1 mol dm^–3.As a result, it was found that the emulsions (which were formed with C₁₂H₂₅(EO) _n surfactants having less than four oxyethylene groups, or with C₉H₁₉ (EO) _n surfactants having less than six oxyethylene groups) brought about rapid coalescence in the bulk pH between 2.03.5, which corresponded to the zero point of charges for the emulsions of the present systems. According to the Tadros treatment for emulsion flocculation, the total flocculation potennual was estimated as a function of the distance relative to the number of oxyethelene groups in the surfactants. The critical coalescence energy was obtained as –343 ×10^–19 J for the C₁₂H₂₅(EO) _n surfactants and –2.14×10^–19) J for the C₉H₁₉ (EO) _n surfactants. Furthermore, the formation of a hole for coalescence was estimated under the simple assumption that the coalescence was caused only by the energy dissipation.