Stability of gas mixture flow with a stabilized detonation wave in a plane channel with a constriction

The stability of a flow with a stabilized detonation wave is studied within the framework of a detailed kinetic mechanism of the chemical interaction. The flow is due to the initiation of detonation combustion of a stoichiometric hydrogen-air mixture that enters into a plane channel with a constriction at a supersonic velocity greater than that of the self-sustained detonation propagation. The flow under consideration is numerically investigated using the software package developed by the authors. It is established that the flow formed in the channel, whose geometric parameters ensure the detonation stabilization in the case of the inflow Mach number M₀ = 5.2, is stable against strong disturbances of a certain type. The effect of an increase in the inflow Mach number and the dustiness of the combustible gas mixture entering into the channel on the stabilization of detonation combustion in the flow is investigated.     

超音速来流中爆轰波衍射和二次起爆过程研究

预爆管技术被广泛地应用在爆轰波发动机的起爆过程中,但是在超音速来流中基于预爆管技术起始爆轰波的研究并未被广泛地开展。基于此,本文中数值研究了横向超音速来流对半自由空间内爆轰波的衍射和自发二次起爆、及管道内的衍射和壁面反射二次起爆两种现象的影响。数值模拟的控制方程为二维欧拉方程,空间上使用五阶WENO格式进行数值离散,采用带有诱导步的两步链分支化学反应模型。所模拟的爆轰波具有规则的胞格结构,对应于用惰性气体高度稀释过的可爆混合物中形成的爆轰波。结果表明:在半自由空间内,在本文所模拟的几何尺寸下,爆轰波并未成功发生二次起爆现象,但是爆轰波的自持传播距离随着横向超音速来流强度的增强而增加。在核心的三角形流动区域外,波面诱导产生了更多的横波结构;在管道内,横向的超音速来流在逆流侧对出口气流产生了压缩作用,能有效提高波面压力,因此反射后的激波压力也比较高。在同样的几何尺寸下,爆轰波在静止和超音速(Ma=2.0)气流中分别出现了二次起爆失败和成功两种现象,这是由于在超音速来流中化学反应面的褶皱诱导产生了横波结构,横波与管壁以及其他横波之间的碰撞提高了前导激波的强度,并最终促进了爆轰波在超声速流主管道内的成功起始。     

Distinctive features of galloping detonation in a supersonic combustible-mixture flow under an inert gas layer

The problem of detonation initiation in a supersonic flow of a stoichiometric propane-air mixture occupying partially or completely the cross-section of a plane channel is considered. The initiation in the flow is produced by a step or a wall completely cutting off the flow. The study is conducted within the framework of one-stage combustion kinetics. A numerical method based on the Godunov scheme is employed. The critical conditions for detonation formation are determined in terms of the oncoming flow velocity. A previously unknown mechanism of detonation propagation is found; it is related with the presence of the combustible mixture in the wall layer under an inert gas layer. It is due to the formation of a complicated wave structure of the flow characterized by the penetration of a shock wave formed in the inert gas layer into a combustible mixture layer ahead of the detonation wave with the result that the latter layer is heated and ignited. The process as a whole is periodic in nature, as distinct from the conventional cellular detonation in a homogeneous fluid. Many problems arise in connection with the use of detonation in engines and other power plants. The most important among them are detonation excitation and stabilization in combustion chambers. The detonation initiation within a layer under conditions of unbounded space and a fluid at rest was experimentally investigated in [1]. In the case of a combustion chamber bounded in the transverse direction, some new effects accompanying the detonation might be expected.     

Propagation of detonation waves in plane channels with obstacles

The detonation wave propagation in plane channels filled with a stoichiometric hydrogen-air mixture at rest under standard conditions is numerically modeled with account for the actual kinetics of the chemical interaction. The calculations show that the stable cellular structure of the detonation wave formed in a plane channel with parallel walls is not always uniquely determined by its width. The effect of transverse walls and sharp expansion of the channel on the propagation of the cellular detonation wave is studied. The conditions of conservation and restoration of detonation are determined.     

Detonation combustion of hydrogen in an axisymmetric channel with a central body

The problem of initiation and stabilization of detonation combustion of a hydrogen–air mixture injected into an axisymmetric channel with a finite-length central body in a flow with a Mach number M₀ = 5–9 is solved. It is numerically demonstrated that the presence of the central body both in a convergent–divergent nozzle and in an expanding channel leads to stabilization of detonation combustion of a stoichiometric hydrogen–air mixture at free-stream Mach numbers M₀ > 7. Various channel configurations that ensure different values of thrust generated by detonation combustion of a stoichiometric hydrogen–air mixture are compared.     

圆球诱发斜爆轰波的数值研究

斜爆轰发动机是飞行器在高马赫数飞行条件下的一种新型发动机,具有结构简单、成本低和比冲高等优点.但是斜爆轰发动机的来流马赫数范围广,来流条件复杂,为实现斜爆轰波的迅速、可靠引发,采用钝头体来诱发.利用Euler方程和氢氧基元反应模型,对超声速氢气/空气混合气体中圆球诱导的斜爆轰流场进行了数值研究.不同于楔面诱发的斜爆轰波,球体首先会在驻点附近诱发正激波/爆轰波,然后在稀疏波作用下发展为斜激波/爆轰波.模拟结果显示,经过钝头体压缩的预混气体达到自燃温度后,会出现两种流场:当马赫数较低时,由于稀疏波的影响,燃烧熄灭,钝头体下游不会出现燃烧情况;而当马赫数较高时,燃烧阵面能传到下游.分析表明,当钝头体的尺度较小时,驻点附近的能量不足以诱发爆轰波,只会形成明显的燃烧带与激波非耦合结构;当钝头体的尺度较大时,流场中不会出现燃烧带与激波的非耦合现象,且这一特征与马赫数无关.通过调整球体直径,获得了激波和燃烧带部分耦合的燃烧流场结构,这一流场结构在楔面诱发的斜爆轰波中并不存在,说明稀疏波与爆轰波面的相互作用是决定圆球诱发斜爆轰波的关键.     

Detonation combustion of hydrogen in a Laval nozzle under rarefied atmosphere conditions

Detonation combustion of a hydrogen-air mixture entering an axisymmetric convergent-divergent nozzle at a supersonic velocity is considered under atmospheric conditions at altitudes up to 24 km. The investigation is carried out on the basis of the two-dimensional gasdynamic Euler equations for a multicomponent reacting gas. The limiting altitude ensuring detonation combustion in a Laval nozzle of given geometry is numerically established for freestream Mach numbers 6 and 7. The possibility of the laser initiation of detonation in a supersonic flow of a stoichiometric, preliminarily heated hydrogen-air mixture is experimentally studied. The investigation is carried out in a shock tube under conditions simulating a supersonic flow in the nozzle throat region.     

Supersonic H2-air combustions behind oblique shock waves

In order to study the mechanisms of initiation and stabilization of H₂-Air combustions (stoechiometric mixture initially atT ₀=293 K andp ₀=0.5 bar) in supersonic flow conditions behind an oblique shock wave (OSW), an original technique is used where OSW is generated in this mixture by the lateral expansion of the burnt gas behind a normal CJ gaseous detonation propagating into a bounding reactive mixture. Four Mach numberM of propagation of OSW are considered in the study, namelyM=7.7-6.1-4.4 and 3. Depending on the Mach numberM and inclinaison angle of OSW different regimes of combustion may occur in the driven mixture. For high values ofM (6.1 and 7.7) delayed steady overdriven oblique detonation waves (SODW) were obtained with a near CJ detonation wave as the critical regime. It was found that SODW obtained correspond quite well to prediction of the polar method. When thermal conditions behind the OSW are lower, either for high Mach number 6.1 and 7.7 for smaller angle than the previous case, or for lower Mach number, 4.4 and 3, the flame initiated at the apex is stabilized as a turbulent oblique flame behind the OSW. With much lower conditions, no combustion appears in the H₂-Air mixture.     

可燃介质中飞行圆球诱导斜爆轰的流场结构

基于带化学反应的二维轴对称Euler方程,利用带有Superbee限制函数的波传播算法,对氢/氧/ 氮预混气中飞行圆球诱导斜爆轰进行了数值模拟。结果表明,在达姆科勒数Da略大于临界情形时,圆球诱导 的驻定爆轰是一个由强过驱斜爆轰、弱过驱斜爆轰、反应激波和惰性激波组合而成的复合结构。波后的圆球 绕流流场内存在2个亚音速区和1个超音速区。在圆球背风表面,还形成了第2道斜激波。     

可燃气体中激波聚焦的点火特性

数值模拟了二维平面激波从抛物面上反射在可燃气体中聚焦的过程,研究了形 成爆轰波的点火特性. 对理想化学当量比氢气/空气混合气体,在初始压强20kPa的条件下, 马赫数2.6-2.8的激波聚焦能产生两个点火区：第1个点火区是反射激波会聚引起的,第 2个点火区是由入射激波在抛物面上发生马赫反射引起的. 这种条件下流场中会出现爆燃转 爆轰,起爆点分别分布在管道壁面、抛物反射面和第2点火区附近. 起爆机理分别为激波管 道壁面反射、点火诱导激波的抛物面反射和点火诱导的激波与第2点火区产生的爆燃波的相 互作用. 不同的点火和起爆过程导致了不同的流场波系结构,同时影响了爆轰波传播的波动 力学过程.     

Generation and stabilization of detonation in a plane elbowed channel

The problem of detonation initiation in a supersonic flow of a stoichiometric propane-air mixture in a plane elbowed channel of constant width is considered. In the bend zone the channel walls are made in the shape of circles of given radii, whose lengths are determined by the given angle of the channel turn. An investigation is performed within the framework of the single-stage combustion kinetics using a numerical method based on the Godunov scheme and included in an original program complex, or a “virtual experimental setup”, developed for performing multiparameter calculations and flow visualization. The critical conditions of detonation generation are determined as functions of the oncoming flow velocity, the channel turn angle and width, and the radii of curvature of the walls.     

Supersonic flow of a combustible gas mixture past a sphere

In recent years considerable interest has developed in the problems of steady-state supersonic flow of a mixture of gases about bodies with the formation of detonation waves and slow combustion fronts. This is due in particular to the problem of fuel combustion in a supersonic air stream.In [1] the problem of supersonic flow past a wedge with a detonation wave attached to the wedge apex is solved. This solution is based on using the equation of the detonation polar obtained in [2]-the analog of the shock polar for the case of an exothermic discontinuity. In [3] a solution is given of the problem of cone flow with an attached detonation wave, and [4] presents solutions of the problems of supersonic flow past the wedge and cone with the formation of attached adiabatic shocks with subsequent combustion of the mixture in slow combustion fronts. In the two latter studies two different solutions were also found for the problem of flow past a point ignition source, one solution with gas combustion in the detonation wave, the other with gas combustion in the slow combustion front following the adiabatic shock. These solutions describe two different asymptotic pictures of flow of a combustible gas mixture past bodies.In an experimental study of the motion of a sphere in a combustible gas mixture [5] it was found that the detonation wave formed ahead of the sphere splits at some distance from the body into an ordinary (adiabatic) shock and a slow combustion front. Arguments are presented in [6] which make it possible to explain this phenomenon and in certain cases to predict its occurrence.The present paper presents examples of the calculation of flow of a combustible gas mixture past a sphere with a detonation wave in the case when the wave does not split. In addition, the flow near the point at which the detonation wave splits is analyzed for the case when splitting occurs where the gas velocity behind the wave is greater than the speed of sound. This analysis shows that in the given case the flow calculation may be carried out without any particular difficulties. On the other hand, the calculation of the flow for the case when the point of splitting is located in the subsonic portion of the flow behind the wave (or in the region of influence of the subsonic portion of the flow) presents difficulties. This flow case is similar to the problem of the supersonic jet of finite width impacting on an obstacle.     

Behavior of the vorticity vector in supersonic axisymmetric swirl flows behind a detonation wave

The behavior of the vorticity vector on a discontinuity surface arising in a supersonic nonuniform combustible gas flow with the formation of a shock or detonation wave is studied. In the general case, it is a vortex flow with prescribed distributions of parameters. It is demonstrated that the ratio of the tangential component of vorticity to density remains continuous in passing through the discontinuity surface, while the quantities proper become discontinuous. Results calculated for flow vorticity behind a steady-state detonation wave in an axisymmetric supersonic flow of a combustible mixture of gases are presented. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 6, pp. 15–21, November–December, 2007     

Effect of Heat Supply on the Stability of the Supersonic Swept Atiachment-Line Boundary Layer

The stability of a boundary layer with volume heat supply on the attachment line of a swept wing is investigated within the framework of the linear theory at supersonic inviscid-free-stream Mach numbers. The results of numerical calculations of the flow stability and neutral curves are presented for the flow on the leading edge of a swept wing with a swept angle χ=60° at various free-stream Mach numbers. The effect of volume heat supply on the characteristics of boundary layer stability on the attachment line is studied at a surface temperature equal to the temperature of the external inviscid flow. It is shown that in the case of a supersonic external inviscid flow volume heat supply may result in an increase in the critical Reynolds number and stabilization of disturbances corresponding to large wave numbers. For certain energy supply parameters the situation is reversed, the unstable disturbances corresponding to the main flow-instability zone are stabilized but another zone of flow-instability with small wave numbers and a significantly lower critical Reynolds number appears.     

Detonation combustion of hydrogen in a convergent-divergent nozzle with a central coaxial cylinder

The feasibility of steady detonation combustion of a hydrogen-air mixture entering at a supersonic velocity in an axisymmetric convergent-divergent nozzle with a central coaxial cylinder is considered. The problem of the nozzle starting and the initiation of detonation combustion is numerically solved with account for the interaction of the outflowing gas with the external supersonic flow. The modeling is based on the gasdynamic Euler equations for an axisymmetric flow. The calculations are carried out using the Godunov scheme on a fine fixed grid which allows one to study in detail the interaction of an oblique shock wave formed in the diffuser with the nozzle axis. It is shown that a central coaxial cylinder ensures the starting with the formation of supersonic flow throughout the entire nozzle and stable detonation combustion of a stoichiometric hydrogen-air mixture in the divergent section of the nozzle.     

Starting of an axisymmetric convergent-divergent nozzle in a hypersonic flow

The starting of an axisymmetric convergent-divergent nozzle, with the result that supersonic flow is formed within almost the entire channel, is modeled, as applied to the hypersonic aerodynamic setup of the Institute of Mechanics of Moscow State University. A successful starting is realized when the nozzle is thrown in a uniform supersonic air flow at a fairly high Mach number. The steady flow structure is studied. It is numerically shown that in the convergent section of the channel there arises an oblique shock wave whose interaction with the nozzle axis leads to the formation of a reflected shock and a curvilinear Mach disk with a region of unsteady subsonic flow in the vicinity of the throat. The mathematical model is based on the two-dimensional Euler equations for axisymmetric gas flows.     

用环形激波聚焦实现爆轰波直接起爆的数值模拟

利用基元反应模型和有限体积法对环形激波在可燃气体中聚焦实现爆轰波直接起爆进行了数值模拟。研究结果表明，标准状态下的氢气-空气混合气体在马赫数为3.1以上的环形激波聚焦产生的高温高压区作用下会诱发可燃气体的直接起爆形成爆轰波，爆轰波与激波和接触间断相互作用产生了复杂的波系结构；爆轰波爆点位置在对称轴上并不是固定的点，而是随着初始激波马赫数的变化而发生移动；可燃气体初始温度和压力对起爆临界马赫数都有影响，但是初始温度的影响大得多。     

炸药多点起爆超高速光电分幅摄影技术研究

为获得炸药多点起爆的爆轰波传播过程精细细节,研究相适应的超高速光电分幅摄影技术,采用自主研制的超高速光电分幅相机,结合有机玻璃光快门,拍摄到以HMX和以TATB为基的塑料粘结炸药在三点同步起爆条件下纳秒时间分辨爆轰波发展高清晰序列图像,成功观察到爆轰波的整个传播及相互作用过程,捕获到内聚相互作用、马赫杆等波形细节结构。实验结果表明:超高速光电分幅摄影技术基于独立曝光模式,且具有曝光时间短、幅间隔连续可调、空间分辨高等优势,可精细观察到爆轰波传播、相互作用细节信息,该实验方法及其结果对于爆轰波相互作用及爆轰波马赫反射等问题研究具有一定的参考价值。     

Transition of plane overdriven detonation wave to the Chapman-Jouguet regime

The asymptotic laws of behavior for plane, cylindrical, and spherical infinitely thin detonation waves were found in [1, 2] for increasing distance from an igniting source in those cases in which the waves changed into Chapman-Jouguet waves as they decayed. It was shown that the plane overdriven detonation wave approaches the Chapman-Jouguet regime asymptotically, while the transition of the cylindrical or spherical strong detonation wave into the Chapman-Jouguet wave may occur at a finite distance from the initiation source.Similar conclusions are valid for the propagation of stationary steadystate detonation waves which arise with flow of combustible gas mixtures past bodies.However, numerous experiments [3, 4] on firing bodies in a detonating gas show that the overdriven detonation wave which forms ahead of the body decays and decomposes into an ordinary compression shock and a slow combustion front. To establish why the wave does not make the transition to the Chapman-Jouguet regime, in the following we consider the propagation of a plane detonation wave and account for finite chemical reaction rates. We use the very simple two-front model (ordinary shock wave and following flame front). Conditions are found for which transition to the Chapman-Jouguet regime does not occur. We first consider the propagation of an unsteady plane wave and then the steady plane wave. It is found that for all the mixtures used in these experiments transition to the Chapman-Jouguet regime is not possible within the framework of the assumed model.