Synthesis of isomeric indolobenzo[b]thiophenes

Indolo[6,5-d]benzo[b]thiophene, indolo[4,5-d]benzo[b]thiophene, indolo[5,6-d]benzo-[b]thiophene, and indolo[5,4-d]benzo[b]thiophene were obtained from the 2- and 3-dibenzothienylhydrazones by means of the Fischer reaction. The structures of the compounds obtained were proved by their PMR, IR, UV, and mass spectra.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 203–208, February, 1980.     

Etudes photochimiques—XIII : Reactions de photoaddition du benzo[b]thiophene avec des amines et avec le pyrrole

The photochemical behavior of benzo[b]thiophene is different from that of thiophene. The former does not undergo photoisomerization and is not converted into an indole when irradiated in the presence of a primary amine; its photochemical behavior resembles that of naphthalene. Thus photoexcited benzo[b]thiophene gives adducts with primary amines (1(H)), secondary amines (2), and pyrrole (3(H)): an exciplex is an intermediate. The existence of the exciplex is supported by the formation of aldehyde 7 when benzo[b]thiophene is irradiated in aqueous propylamine, the finding that photoexcited benzo[b]thiophene does not react with an alcohol and that photoexcited indole benzo[b]furan, 2-methylbenzo[b]thiophene, and 3-methylbenzo[b]thiophene do not react with propylamine or with piperidine. The results are interpreted in terms of spin densities calculated for the anion radicals of the compounds under study.     

An investigation of condensed heteroaromatic systems including a thiophene ring

The influence of the temperature, of the natures of the initiator and of the initial compound, and of the concentrations of the reactants on the process and nature of the transformations of 2- and 3-alkyl-, 2- and 3-formyl-, and 2- and 3-hydroxymethylbenzo[b]thiophenes under conditions of liquid-phase oxidation with oxygen in the presence of cobalt acetate in acetic acid has been studied. According to their relative ease of oxidation, the homologs and derivatives of benzo[b]thiophene, thiophene, and benzene can be arranged in the following sequence: 3-methylbenzo[b]thiophene > 2-methylbenzo[b]thiophene > 2-methylthiophene > toluene > 3-methylbenzo[b]thiophene dioxide > 2-methylbenzo[b]thiophene dioxide; benzaldehyde > benzo[b]thiophene-3-carbaldehyde > thiophene-2-carbaldehyde > benzo[b]-thiophene-2-carbaldehyde; 3-hydroxymethylbenzo[b]thiophene > 2-hydroxymethylbenzo[b]-thiophene > benzyl alcohol > 2-hydroxymethylthiophene. The liquid-phase oxidation of alkyl-substituted benzo[b]thiophenes can be used to obtain aldehydes, ketones, and acids of the benzo[b]thiophene series.For Communication XXIV, see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1026–1033, August, 1973.     

Toluene dioxygenase-catalyzed cis-dihydroxylation of benzo[b]thiophenes and benzo[b]furans: synthesis of benzo[b]thiophene 2,3-oxide

Enzymatic cis-dihydroxylation of benzo[b]thiophene, benzo[b]furan and several methyl substituted derivatives was found to occur in both the carbocyclic and heterocyclic rings. Relative and absolute configurations and enantiopurities of the resulting dihydrodiols were determined. Hydrogenation of the alkene bond in carbocyclic cis-dihydrodiols and ring-opening epimerization/reduction reactions of heterocyclic cis/trans-dihydrodiols were also studied. The relatively stable heterocyclic dihydrodiols of benzo[b]thiophene and benzo[b]furan showed a strong preference for the trans configuration in aqueous solutions. The 2,3-dihydrodiol metabolite of benzo[b]thiophene was utilized as a precursor in the chemoenzymatic synthesis of the unstable arene oxide, benzo[b]thiophene 2,3-oxide.     

Bacterial dioxygenase- and monooxygenase-catalysed sulfoxidation of benzo[b]thiophenes

Asymmetric heteroatom oxidation of benzo[b]thiophenes to yield the corresponding sulfoxides was catalysed by toluene dioxygenase (TDO), naphthalene dioxygenase (NDO) and styrene monooxygenase (SMO) enzymes present in P. putida mutant and E. coli recombinant whole cells. TDO-catalysed oxidation yielded the relatively unstable benzo[b]thiophene sulfoxide; its dimerization, followed by dehydrogenation, resulted in the isolation of stable tetracyclic sulfoxides as minor products with cis-dihydrodiols being the dominant metabolites. SMO mainly catalysed the formation of enantioenriched benzo[b]thiophene sulfoxide and 2-methyl benzo[b]thiophene sulfoxides which racemized at ambient temperature. The barriers to pyramidal sulfur inversion of 2- and 3-methyl benzo[b]thiophene sulfoxide metabolites, obtained using TDO and NDO as biocatalysts, were found to be ca.: 25-27 kcal mol(-1). The absolute configurations of the benzo[b]thiophene sulfoxides were determined by ECD spectroscopy, X-ray crystallography and stereochemical correlation. A site-directed mutant E. coli strain containing an engineered form of NDO, was found to change the regioselectivity toward preferential oxidation of the thiophene ring rather than the benzene ring.     

Nucleophilic addition to benzo[b]thieno[2,3-b]benzo[b]thiophene S,S,S′,S′-tetroxide

The reaction of benzo[b]thieno[2,3-b]benzo[b]thiophene S,S,S′,S′-tetroxide with primary and secondary amines and with alcohols gave 10 b-amino- and 10 b-alkoxy-5a, 10b-dihydro-benzo[b]thieno[2,3-b]benzo[b]thiophene S,S,S′,S′-tetroxides. These nucleophilic reagents do not add to benzo[b]thieno[2,3-b]benzo[b]thiophene S,S-dioxide.     

New reaction of benzo[b]thieno[3,2-b]benzo[b]thiophene disulfone

A new reaction of benzo[b]thieno[3,2-b]benzo[b]thiophene disulfone with amines that takes place with opening of one of the thiophene rings and nucleophilic substitution in the heteroaromatic ring at the site of cleavage of the S-C bond was observed. The molecular structures of the products of amination of the disulfone were determined by x-ray diffraction analysis. Hydrolysis and dehydration of the amination products gave derivatives of a new heterocyclic system, viz., benzo[b]-thieno[3,2-e]benzo[c]-1,2-oxathiin. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 320–323, March, 1980.     

Indolobenzothiophenes. 2. Some electrophilic substitution reactions of indolo[6,5-d]benzo[b]thiophene

The behavior of indolo[6,5-d]benzo[b]thiophene in acylation, Mannich, Vilsmeier, and diazo coupling reactions was investigated. Acylation with acetic anhydride proceeds unambiguously at the pyrrole nitrogen atom to give 1-acetylindolo[6,5-d] benzo[b]thiophene. The products of formylation are 2- and 3-formylindolo-[6,5-d] benzo[b]thiophenes. In the case of the Mannich reaction and diazo coupling substitution takes place in the 3 position of the indolobenzo[b]thiophene ring. The structures of the products obtained were proved by spectroscopic methods.See [1] for Communication 1.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 211–214, February, 1981.     

Sulfur-rich heterocycles from 2-metalated benzo[b]thiophene and benzo[b]furan: synthesis and structure

The reaction of 2-lithiated benzo[b]thiophene with 8 equiv of elemental sulfur was found to give pentathiepino[6,7-b]benzo[d]thiophene. In contrast, treatment of 2-lithiated benzo[b]furan with sulfur under similar conditions produced the interesting ring system bis(benzo[4,5]furo)[2,3-e:3',2'-g][1,2,3,4]tetrathiocine. Both of these new cyclic polysulfides were studied by X-ray crystallography. Two polymorphic forms of pentathiepino[6,7-b]benzo[d]thiophene were found, displaying similar conformations but different packing schemes, which was also evident from powder diffraction data.     

Synthesis of methyl-substituted benzofuro-, benzothieno-, and benzoselenopheno[2,3-b] pyridines

Three-ring benzo[b]furan, benzo[b]selenophene, and benzo [b]thiophene systems condensed with a pyridine ring and having a methyl group in the γ position of the pyridine ring were synthesized.     

The synthesis of polycyclic thiophenes derived from phenanthrene intermediates

The synthesis of benzo[b]triphenyleno[2,1-d]thiophene ( 9 ), benzo[b]triphenyleno[1,2-d]thiophene ( 13 ), 5-methylbenz[7,8]anthra[2,1-b]thiophene ( 17 ), l-methylchryseno[3,4-b]thiophene ( 18 ), triphenyleno[1,2-c]dibenzothiophene ( 22 ), triphenyleno[2,1-a]dibenzothiophene ( 26 ), triphenyleno[1,2-a]dibenzothiophene ( 29 ), and triphenyleno[2,1-b]dibenzothiophene ( 30 ) is described.     

Thiophene chemistry—XXII : Some reactions of benzo[b]thiophene-2(3H)one

Benzo[b]thiophene-2(3H)one has been prepared from 2-t-butoxybenzo[b]thiophene by dealkylation. Alkylation of sodium, thallium and tetrabutylammonium salts of benzo[b]thiophene-2(3H)one produces both C- and O-alkylation along with products due to ring-opening. At elevated temperatures benzo[b]thiophene-2(3H)one reacts with HMPA (hexamethylphosphorictriamide) to give 2-dimethylaminobenzo[b]thiophene. Other 2-aminobenzo[b]thiophenes are produced by refluxing benzo[b]thiophene-2(3H)one in HMPA in the presence of excess of the corresponding amine.     

The synthesis of benzo[b]phenanthro[d]thiophenes and anthra[b]benzo[d]thiophenes

The synthesis of benzo[b]phenanthro[2, 3-d]thiophene ( 5 ), benzo[b]phenanthro[4, 3-d]thiophene ( 6 ), benzo-[b]phenanthro[2, 1-d]thiophene ( 9 ), benzo[b]phenanthro[3, 2-d]thiophene ( 14a ), anthra[1, 2-b]benzo[d]thiophene ( 24 ), anthra[2, 3-b]benzo[d]thiophene ( 29 ) and anthra[2, 1-b]benzo[d]thiophene ( 30 ) is described as well as the preparation of 13-methylbenzo[b]phenanthro[3, 2-d]thiophene ( 14b ).     

Synthesis and some transformations of benzo[b]thiophene derivatives

A number of 3-chloro-2-chlorocarbonylbenzo [b] thiophenes with alkyl substituants in various positions of the benzene ring were synthesized by arylation of acrylic acid with the corresponding alkyl-substituted iodobenzenes under the influence of catalytic amounts of palladium acetate and subsequent oxidation of the resulting arylacrylic acids with thionyl chloride. Replacement of the pyridine added in the oxidation reaction by triethylbenzylammonium chloride led to substantial increases in the yields of the desired products. The possibility of conversion of the resulting benzo [b] thiophene derivatives to thiophene ring-unsubstituted benzo[b] thiophenes was shown in the case of 3-chloro-2-chlorocarbonylbenzo [b] thiophene as a result of successive saponification of the 2-chlorocarbonyl group, decarboxylation, and dechlorination.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1618–1622, December, 1982.     

Photoelectron spectra of planar sulfur heterocycles

The photoelectron spectra of benzo[b]thiophene (2), benzo[c]thiophene (3), thieno[3,2-b] thiophene (4) and thieno[2,3-b]thiophene (5) together with 2,1,3-benzothiadiazol (6) and benzofurazan (7) have been recorded and the first three bands have been assigned to π-orbitals on the basis of band shapes and semiempirical calculations. The good agreement obtained between measured and calculated ionization potentials suggests that sulfur 3d orbital participation must be very small.     

Deprotonative metalation of five-membered aromatic heterocycles using mixed lithium-zinc species

Deprotonation of benzoxazole, benzothiazole, benzo[b]thiophene, benzo[b]furan, N-Boc-protected indole and pyrrole, and N-phenylpyrazole using an in situ mixture of ZnCl(2).TMEDA (0.5 equiv) and lithium 2,2,6,6-tetramethylpiperidide (1.5 equiv) in THF at room temperature is described. The reaction was evidenced by trapping with iodine, regioselectively giving the expected functionalized derivatives in 52-73% yields. A mixture of mono- and disubstituted derivatives was obtained starting from thiazole. Cross-coupling reactions of 2-metalated benzo[b]thiophene and benzo[b]furan with heteroaromatic chlorides proved possible under palladium catalysis. A reaction pathway where the lithium amide and zinc diamide present in solution behave synergically was proposed for the deprotonation reaction, taking account of NMR and DFT studies carried out on the basic mixture.     

The insertion and extrusion of heterosulfur bridges. IX: Sulfur bridging in 2-phenylnaphthalene

Sulfur bridging of 2-phenylnaphlhalene ( 3 ) to form benzo[b ]naphtho[2,1-d]thiophene ( 5 ) (main product) and the isomeric benzo[b]naphtho[2,3-d]thiophene ( 4 ) is effected by means of hydrogen sulfide, benzene (solvent), and a sulfided cobaltous oxide-molybdic oxide-alumina (CMA-1) catalyst at 450–630° in a flow system (maximum yield 33% at 500°). The low yield is ascribed to decompositions of both 4 and 5 under reaction conditions.     

Synthesis of benzo[1,2]phenaleno[bc]thiophenes

The synthesis of both isomers of benzo[1,2]phenaleno[bc]thiophene namely, benzo[1,2]phenaleno[3,4-bc]-thiophene and benzo[1,2]phenaleno[4,3-bc]thiophene is described.     

阿佐昔芬的合成

以4-溴苯乙酮为起始原料,经溴化、与3-甲氧基苯硫酚缩合、分子内环合得6-甲氧基-2-(4-溴苯基)苯并[b]噻吩(5);5经溴化、氧化反应后,与4-[2-(1-哌啶基)乙氧基]苯酚缩合制得关键中间体3-{4-[2-(1-哌啶基)乙氧基]苯氧基}-6-甲氧基-2-(4-溴苯基)苯并[b]噻吩亚砜(7);7再经还原、脱甲...     

Specific interaction between fluorine atoms and thiol groups accounting for higher domain purity and photostability in narrowband BHJ systems

In order to explore the role of fluorine atoms on photostability as well as morphology control of active layer in the presence of 1,4‐butanedithiol (BT), the four polymers with or without fluorine atoms in the backbones including polythieno[3,4‐b]thiophene/benzodithiophene, poly[(4,8‐bis‐(2‐ethylhexyloxy)‐benzo(1,2‐b:4,5‐b9)dithiophene)‐2,6‐diyl‐alt‐(4‐(2‐ethylhexanoyl)‐thieno[3,4‐b]thiophene‐)‐2‐6‐diyl)], poly[4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b;4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(4‐(2‐ethylhexyl)‐3‐fluorothieno[3,4‐b]thiophene‐)‐2‐carboxylate‐2‐6‐diyl)], and poly[4,8‐bis‐(2‐ethyl‐hexyl‐thiophene‐5‐yl)‐benzo[1,2‐b:4,5‐b0]dithiophene‐2,6‐diyl]‐alt‐[2‐(20‐ethyl‐hexanoyl)‐thieno [3,4‐b]thiophen‐4,6‐diyl] were selected for comparison. It is found that the specimens containing fluorine atoms in polymer backbones showed of higher stability after illumination for 1 h in the presence of BT additive, contributing to the higher domain purity. The specific interaction between fluorine atoms and thiol groups was demonstrated by the appearance of novel absorption peak at 2663.1 cm^?1, in addition to the broadening of peak at 2556.2 cm^?1 ascribing to S? H stretching vibration as confirmed by Fourier transform infrared (FTIR) spectroscopy. The finding may guide the accurate use of thiols as effective solvent additive in morphology and stability optimization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 941–951