Photoinduced and thermally induced cationic polymerizations using S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salts

A study of the photoinitiated and thermally initiated cationic polymerizations of several monomer systems with S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salt (HPS) photoinitiators bearing different lengths of alkyl chains on the positively charged sulfur atom has been conducted. HPS photoinitiators are capable of photoinitiating the cationic polymerization of a wide variety of epoxy and vinyl ether monomers directly on irradiation with short‐wavelength UV light. Aryl ketone photosensitizers are effective in extending the spectral response of these photoinitiators into the long‐wavelength UV region. Kinetic studies with real‐time infrared spectroscopy show that HPS photoinitiators exhibit good efficiency in the polymerization of epoxide and vinyl ether monomers. Comparative studies also demonstrate that S,S‐dimethyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts are more active photoinitiators than their isomeric S,S‐dimethyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium salt counterparts. Both types of HPS photoinitiators display reversible photolysis as a result of facile termination reactions that take place between the growing chains ends with the photogenerated sulfur ylides. Preliminary studies have shown that HPS photoinitiators can also be employed as thermal initiators for the cationic ring‐opening polymerization of epoxides at moderate temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2570–2587, 2003     

Hydriodic Acid‐Mediated Cyclization of α‐Substituted Secondary 2‐Ethenylbenzamides: Synthesis of 2‐Substituted 2,3‐Dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones and 3,3‐Disubstituted (E)‐1‐(Arylimino)‐1,3‐dihydroisobenzofurans

A new and facile method for the preparation of 2‐substituted 2,3‐dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones 3 and 3,3‐disubstituted (E)‐1‐(arylimino)‐1,3‐dihydroisobenzofurans 6 has been developed. Thus, treatment of N‐alkyl(or aryl)‐2‐(1‐methylethen‐1‐yl)benzamides 2 with concentrated hydriodic acid (HI) in MeCN at room temperature afforded 3 . Similar treatment of N‐aryl‐2‐(1‐phenylethen‐1‐yl)benzamide 5 with concentrated HI at 0° afforded 6 .     

Effect of Medium Acidity and Photostability of 3‐(4‐Dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP): A New Green Emitting Laser Dye

On the line of a previous work on the spectral properties of some of heteroaryl chalcone, the effect of medium acidity and photoreactivity of 3‐(4‐dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP) has been investigated in dimethylformamide and in chloromethane solvents such as methylenechloride, chloroform and carbon tetrachloride. The dye solution (ca. 5×10⁻⁴ mol·L⁻¹ in DMF) gives a good laser emission in the range 470–560 nm with emission maximum at 515 nm upon pumping by nitrogen laser (λ_ex=337.1 nm). The laser parameters such as gain coefficient (α), emission cross section (δ_e) and half life energy (E_1/2) at maximum laser emission are also determined.     

Reactions of Di(tert‐butyl)diazomethane with Acceptor‐Substituted Ethylenes

Di(tert‐butyl)diazomethane ( 4 ) is a nucleophilic 1,3‐dipole with strong steric hindrance at one terminus. In its reaction with 2,3‐bis(trifluoromethyl)fumaronitrile ((E)‐ BTE ), a highly electrophilic tetra‐acceptor‐substituted ethene, an imino‐substituted cyclopentene 9 is formed as a 1 : 2 product. The open‐chain zwitterion 10 , assumed as intermediate, adds the second molecule of (E)‐ BTE . The ¹⁹F‐ and ¹³C‐NMR spectra allow the structural assignment of two diastereoisomers, 9A and 9B . The zwitterion 10 can also be intercepted by dimethyl 2,3‐dicyanofumarate ( 11 ) and furnishes diastereoisomeric cyclopentenes 12A and 12B ; an X‐ray‐analysis of 12B confirms the ‘mixed’ 1 : 1 : 1 product. Competing is an (E)‐ BTE ‐catalyzed decomposition of 4 to give 2,3,4,4‐tetramethylpent‐1‐ene ( 7 )+N₂; the reaction of (E)‐ BTE with a trace of water appears to be responsible for the chain initiation. The H₂SO₄‐catalyzed decomposition of diazoalkane 4 , indeed, produced the alkene 7 in high yield. The attack on the hindered diazoalkane 4 by 11 is slower than that by (E)‐ BTE ; the zwitterionic intermediate 21 undergoes cyclization and furnishes the tetrasubstituted furan 22 . In fumaronitrile, electrophilicity and steric demand are diminished, and a 1,3‐cycloaddition produces the 4,5‐dihydro‐1H‐pyrazole derivative 25 . The reaction of 4 with dimethyl acetylenedicarboxylate leads to pyrazole 29 +isobutene.     

1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: Enol Ethers and Ketene Acetals as Cycloaddition Partners

(E)‐ and (Z)‐1,2‐bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile ((E)‐ and (Z)‐BTE, resp., =(E)‐ and (Z)‐2,3‐bis(trifluoromethyl)but‐2‐enedinitrile) were used as a stereochemical probe in studying (2+2) cycloadditions of acceptor with donor alkenes. The additions to methyl (E)‐ and (Z)‐propenyl ether gave rise to the eight conceivable cyclobutanes 8 , although in different ratios in reactions of (E)‐ and (Z)‐BTE. The ¹⁹F‐NMR data served the structural assignment and the quantitative analysis. The mechanistic discussion is based on rotations and ring closures of the assumed 1,4‐zwitterionic intermediates. Dimethylketene dimethyl acetal, methylketene dimethyl acetal, and ketene diethyl acetal show an increasing rate in their reactions with BTE as well as in the equilibration of the cycloadducts.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

A Rapid and Efficient Stereoselective Synthesis of (Z)‐ and (E)‐Allyl Bromides from Baylis–Hillman Adducts Using Bromo(dimethyl)sulfonium Bromide

Treatment of Baylis–Hillman adducts 1 with bromo(dimethyl)sulfonium bromide, Br(Me₂)S⁺Br^?, in MeCN was found to stereoselectively afford (Z)‐ and (E)‐allyl bromides 2 . The reaction is rapid at room temperature, high‐yielding, and highly stereoselective.     

A Facile Synthesis of Oxoindenothiazine and Dioxospiro(indene‐2,4′‐thiazine) Derivatives from (Substituted ethylidene)hydrazinecarbothioamides

(E)‐2‐[2‐(1‐Substituted ethylidene)hydrazinyl]‐5‐oxo‐9b‐hydroxy‐5,9b‐dihydroindeno[1,2‐d][1,3]‐thiazine‐4‐carbonitriles and (E)‐5‐oxo‐[(E)‐(1‐substituted ethylidene)hydrazinyl]‐2,5‐dihydroindeno[1,2‐d][1,3]thiazine‐4‐carbonitriles have been obtained from the reaction of 2‐(substituted ethylidene)hydrazinecarbothioamides with 2‐(1,3‐dioxo‐2,3‐dihydro‐1H‐inden‐2‐ylidene)propanedinitrile ( 1 ) in ethyl acetate solution. However, (Z)‐6′‐amino‐1,3‐dioxo‐3′‐substituted‐2′‐[(E)‐(1‐phenylethylidene)hydrazono]‐1,2′,3,3′‐tetrahydrospiro(indene‐2,4′‐[1,3]thiazine)‐5′‐carbonitriles were observed during the reaction of N‐substituted‐2‐(1‐phenylethylidene)hydrazinecarbothioamides with ( 1 ). The structure assignment of products has been confirmed on the basis of ¹H‐, ¹³C‐NMR, and mass spectrometry, as well as theoretical calculations.     

Synthesis and characterization of poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐grafted‐poly(acrylonitrile) via single electron transfer–living radical polymerization process

Preparation of functional fluoromaterials through chemical modification of traditional fluoropolymers has been recognized as an economic and convenient strategy to expand the application areas of fluoropolymers. Poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐grafted‐polyacrylonitrile (P(VDF‐co‐CTFE)‐g‐PAN) has been successfully synthesized via single electron transfer–living radical polymerization (SET–LRP) process initiated with macroinitiator P(VDF‐co‐CTFE) in the presence of trace amount of Cu(0)/tris(2(dimethylamino)ethyl)amine (Me₆‐TREN) in dimethyl sulfoxide (DMSO) at ambient temperature. The typical side reactions happened on P(VDF‐co‐CTFE) induced by the nitrogen‐containing solvents and high reaction temperature in atom transfer radical polymerization process could be avoided in SET–LRP process by using the mild reaction conditions. Well‐controlled polymerization features were observed under varied reaction conditions including the different reaction temperature, catalyst concentration, as well as monomer amount in feed. An induction period of 0.5–1.0 h in the polymerization procedure was observed at low temperature, which may be attributed to the Cu₂O from the surface of the Cu(0) powder. When Cu(0) catalyst is activated, the introduction period is eliminated. The polymerization rates were decelerated by adding excessive Me₆‐TREN for the formation of more stable CuCl₂/(Me₆‐TREN)₂. The structure of P(VDF‐co‐CTFE)‐g‐PAN was demonstrated by FTIR, NMR, DSC, and TGA. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Syntheses,Crystal Structures and Luminescent Properties of a Dimeric Complex [(bzdmpzm)Cu(μ-I)]2 and a Polymeric Complex [(bzdmpzm)Cu(μ-NCS)]n (bzdmpzm=Bis(4-benzyl-3,5-dimethyl-1H-pyrazol-1-yl)methane)

Reactions of CuX (X=I, NCS) with bis(4‐benzyl‐3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methane (bzdmpzm) in MeCN resulted in the formation of one dimer [(bzdmpzm)Cu(µ‐I)]₂ ( 1 ) and one 1D polymer [(bzdmpzm)Cu(µ‐NCS)]_n ( 2 ) in high yields. 1 and 2 were characterized by elemental analysis, IR, ¹H NMR spectra, powder X‐ray diffraction and single‐crystal X‐ray diffraction. 1 consists of two scorpion‐like [(bzdmpzm)Cu]⁺ fragments bridged by two iodides, forming a dimeric structure. 2 contains a unique 1D scolopendra‐like chain of [(bzdmpzm)Cu]⁺ fragments linked by pairs of thiocyanates. The luminescence properties of 1 and 2 were also investigated.     

A new route for the synthesis of phosphate esters: 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide

Podand‐type ligands are an interesting class of acyclic ligands which can form host–guest complexes with many transition metals and can undergo conformational changes. Organic phosphates are components of many biological molecules. A new route for the synthesis of phosphate esters with a retained six‐membered ring has been used to prepare 2,2′‐[benzene‐1,2‐diylbis(oxy)]bis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, C₆H₄{O[cyclo‐P(O)OCH₂CMe₂CH₂O]}₂ or C₁₆H₂₄O₈P₂, (1), 2‐[(2′‐hydroxybiphenyl‐2‐yl)oxy]‐5,5‐dimethyl‐1,3,2‐dioxaphosphinane 2‐oxide, [cyclo‐P(O)OCH₂CMe₂CH₂O](2,2′‐OC₆H₄–C₆H₄OH), (2), and oxybis(5,5‐dimethyl‐1,3,2‐dioxaphosphinane) 2,2′‐dioxide, O[cyclo‐P(O)OCH₂CMe₂CH₂O]₂, (3). Compound (1) is novel, whereas the results for compounds (2) and (3) have been reported previously, but we record here our results for compound (3), which we find are more precise and accurate than those currently reported in the literature. In (1), two cyclo‐P(O)OCH₂CMe₂CH₂O groups are linked through a catechol group. The conformations about the two catechol O atoms are quite different, viz. one C—C—O—P torsion angle is −169.11 (11)° and indicates a trans arrangement, whereas the other C—C—O—P torsion angle is 92.48 (16)°, showing a gauche conformation. Both six‐membered POCCCO rings have good chair‐shape conformations. In both the trans and gauche conformations, the catechol O atoms are in the axial sites and the short P=O bonds are equatorially bound.     

Nickel(II) complexes bearing pyrazolylpyridines: synthesis,structures and ethylene oligomerization reactions

Reactions of 2‐bromo‐6‐(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)pyridine ( L1 ) and 2,6‐bis(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)pyridine ( L2 ) with NiCl₂ and NiBr₂ led to the formation of their respective metal complexes [NiCl₂(L1)] ( 1 ), [NiBr₂(L1)] ( 2 ) and [NiBr₂(L2)] ( 3 ) in moderate to high yields. The complexes were characterized using elemental analyses, mass spectrometry and single‐crystal X‐ray diffraction for 2 . The solid‐state structure of 2 confirmed the bidentate coordination mode of L1 and formation of a monometallic compound. Activation of the nickel(II) pre‐catalysts with methylaluminoxane afforded active catalysts in the ethylene oligomerization reaction to produce mainly butenes (84–86%). In contrast, activation of nickel(II) pre‐catalyst 2 with ethylaluminium dichloride resulted in partial Friedel–Crafts alkylation of the toluene solvent by the preformed oligomers. Complex structure, nature of co‐catalyst employed, type of solvent and reaction conditions influenced the catalytic behaviour of these pre‐catalysts. Copyright © 2015 John Wiley & Sons, Ltd.     

A Novel Chemoselective Cleavage of (tert‐Butyl)(dimethyl)silyl (TBS) Ethers Catalyzed by Ce(SO4)2⋅4 H2O

(tert‐Butyl)(dimethyl)silyl (^tBuMe₂Si; TBS) phenyl/alkyl ethers were efficiently cleaved to the corresponding parent hydroxy compounds in good yields using catalytic amounts of Ce(SO₄)₂?4 H₂O by microwave‐assisted or conventional heating in MeOH. Intramolecular and competitive experiments demonstrated the chemoselective deprotection of TBS ethers in the presence of triisopropylsilyl (ⁱPr₃Si; TIPS) and (tert‐butyl)(diphenyl)silyl (^tBuPh₂Si; TBDPS) ethers.     

Efficient Synthesis of 2‐(N‐Substituted)‐2‐imidazolines and 2‐(N‐Substituted)‐1,4,5,6‐tetrahydropyrimidines

A general method for the preparation of 2‐(N‐Substituted)‐2‐imidazolines and 2‐(N‐Substituted)‐1,4,5,6‐tetrahydropyrimidines is described. These heterocycles can be synthesized from their respective anilines with 2‐chloro‐2‐imidazoline or 2‐chloro‐1,4,5,6‐tetrahydropyrimidine, generated in situ from imidazolidin‐2‐one and tetrahydropyrimidin‐2(1H)‐one activated by dimethyl chlorophosphate, in good to excellent yields.     

Miscible blends of poly(ethylene oxide) with brush copolymers of poly(vinyl alcohol)‐graft‐poly(l‐lactide)

Even though poly(ethylene oxide) (PEO) is immiscible with both poly(l ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA), this article shows a working route to obtain miscible blends based on these polymers. The miscibility of these polymers has been analyzed using the solubility parameter approach to choose the proper ratios of the constituents of the blend. Then, PVA has been grafted with l ‐lactide (LLA) through ring‐opening polymerization to obtain a poly(vinyl alcohol)‐graft‐poly(l ‐lactide) (PVA‐g‐PLLA) brush copolymer with 82 mol % LLA according to ¹H and ¹³C NMR spectroscopies. PEO has been blended with the PVA‐g‐PLLA brush copolymer and the miscibility of the system has been analyzed by DSC, FTIR, OM, and SEM. The particular architecture of the blends results in DSC traces lacking clearly distinguishable glass transitions that have been explained considering self‐concentration effects (Lodge and McLeish) and the associated concentration fluctuations. Fortunately, the FTIR analysis is conclusive regarding the miscibility and the specific interactions in these systems. Melting point depression analysis suggests that interactions of intermediate strength and PLOM and SEM reveal homogeneous morphologies for the PEO/PVA‐g‐PLLA blends. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1217–1226     

End‐group modification of poly(2,6‐dimethyl‐1,4‐phenylene ether) and in situ synthesis of poly(2,6‐dimethyl‐1,4‐phenylene ether)‐b‐poly(ethylene terephthalate) block copolymer

The preparation of poly(2,6‐dimethyl‐1,4‐phenylene ether)‐b‐poly(ethylene terephthalate) block copolymer was performed by the reaction of the 2‐hydroxyethyl modified poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE‐EtOH) with poly(ethylene terephthalate) (PET) by an in situ process, during the synthesis of the polyester. The yield of the reaction of the 2‐hydroxyethyl functionalized PPE‐EtOH with PET was close to 100%. A significant proportion of the PET‐b‐PPE‐EtOH block copolymer was found to have short PET block. Nevertheless, the copolymer structured in the shape of micelles (20 nm diameter) and very small domains with 50–200 nm diameter, whereas unmodified PPE formed much larger domains (1.5 μm) containing copolymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3985–3991, 2008     

Aromatic poly(1,3,4‐oxadiazole)s and poly(amide‐1,3,4‐oxadiazole)s containing ether sulfone linkages

Polyhydrazides and poly(amide‐hydrazide)s were prepared from two ether‐sulfone‐dicarboxylic acids, 4,4′‐[sulfonylbis(1,4‐phenylene)dioxy]dibenzoic acid and 4,4′‐[sulfonylbis(2,6‐dimethyl‐1,4‐phenylene)dioxy]dibenzoic acid, or their diacyl chlorides with terephthalic dihydrazide, isophthalic dihydrazide, and p‐aminobenzhydrazide via a phosphorylation reaction or a low‐temperature solution polycondensation. All the hydrazide polymers were found to be amorphous according to X‐ray diffraction analysis. They were readily soluble in polar organic solvents such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide and could afford colorless, flexible, and tough films with good mechanical strengths via solvent casting. These hydrazide polymers exhibited glass‐transition temperatures of 149–207 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the solid state at elevated temperatures. Although the oxadiazole polymers showed a significantly decreased solubility with respect to their hydrazide prepolymers, some oxadiazole polymers were still organosoluble. The thermally converted oxadiazole polymers had glass‐transition temperatures of 217–255 °C and softening temperatures of 215–268 °C and did not show significant weight loss before 400 °C in nitrogen or air. For a comparative study, related sulfonyl polymers without the ether groups were also synthesized from 4,4′‐sulfonyldibenzoic acid and the hydrazide monomers by the same synthetic routes. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2271–2286, 2001     

Cationic poly(ester‐phosphoester)s: Facile synthesis and antibacterial properties

Biodegradable poly(ester‐phosphoester)s bearing multiple chloroethyl groups were synthesized facilely by the ring‐opening copolymerization of 2‐(2‐chloroethoxy)‐2‐oxo‐1,3,2‐dioxaphospholane (CEP) and ε‐caprolactone (CL) in the presence of lanthanum tris(2,6‐di‐tert‐butyl‐4‐methylphenolate)s (La(DBMP)₃) as single‐component catalyst under mild conditions. Then the quaternization reaction was carried out between the halide copolymers and a series of N,N‐dimethyl alkylamines to give poly(ester‐phosphoester)s containing ammonium groups with various charge density and alkyl chain length. The antibacterial properties of these cationic poly(esterphosphoester)s were evaluated by OD600 and zone of inhibition methods against gram‐negative (Escherichia coli) and gram‐positive (Staphylococcus aureus) bacteria. Cationic poly(esterphosphoester)s with long alkyl chain on the ammonium groups show excellent antibacterial activity for both gram‐negative and gram‐positive bacteria even with low charge density. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3667–3673     

Study of the Complexation of Pb(II) with meso‐2,3‐ Dimercaptosuccinic Acid (DMSA) and 2,3‐Dimercapto‐1‐propanesulfonic acid (DMPS) Using a Bismuth‐Bulk Rotating Disk Electrode

For the first time, the suitability of bismuth bulk rotating disk electrode (BiB‐RDE) for the study of metal complexation has been tested. Cyclic (CV) and differential pulse (DPV) voltammetry have been used to study the complexation of Pb(II) with two of the most effective chelating agents for the treatment of Pb(II) poisoning (meso‐2,3‐dimercaptosuccinic acid, DMSA, and 2,3‐dimercapto‐1‐propanesulfonic acid, DMPS). Multivariate curve resolution has been applied to voltammetric data to obtain the stoichiometries and stability constants of the complexes formed. In both systems, the ML₂ complex was predominant, with log β₂ values of 10.13 and 8.80 for DMSA‐Pb(II) and DMPS‐Pb(II), respectively.     

gem‐Dimethyl‐bearing C‐Glucosides as Sodium‐glucose Co‐transporter 2 (SGLT2) Inhibitors

Three novel gem‐dimethyl C‐glucosides were designed as sodium‐glucose co‐transporter 2 (SGLT2) inhibitors, and their syntheses started from D‐glucose and three 2‐substituted‐5‐bromobenzoic acids were achieved via a facile 8‐step protocol, with the key step being anhydrous aluminum chloride‐catalyzed Friedel‐Crafts alkylation of tertiary alcohols and phenetol. These three SGLT2 inhibitors were evaluated in vivo with a mice oral glucose tolerance test (OGTT), and the anti‐hyperglycemic activities of all these three compounds were comparable with that of the positive control Dapagliflozin.