Nanomolar Determination of Penicillamine by Using a Novel Cobalt/Polyaniline/Carbon Paste Nanocomposite Electrode

The fabrication of cobalt/polyaniline nanocomposite was performed using a simple chemical method. It was characterized by using TEM and FTIR techniques. The nanocomposite was applied as a modifier in a carbon paste electrode for selective determination of penicillamine. Penicillamine reacts with emeraldine polyaniline by using 1,4, Michael addition reaction. It can decrease the voltammetric peak current of emeraldine polyaniline. The effects of pH and potential sweep rate on the response of the electrode were investigated. Differential pulse voltammetry was applied for quantitative determination. Dynamic linear ranges were obtained in the ranges of 1.0×10^?8–1.0×10^?7 mol L^?1 and 1.0×10^?9–1.0×10^?8 mol L^?1.     

A.C. polarography and faradaic impedance of strongly adsorbed electroactive species: Part I. Theoretical and experimental study of a quasi-reversible reaction in the case of a Langmuir isotherm

The expression of the faradaic impedance is calculated in the case of a quasi-reversible system O+ne R under the following conditions: (a) both the oxidized and the reduced forms are strongly adsorbed; (b) the adsorption rate is large, and does not control the kinetics of the system; (c) the adsorption of both O and R obeys a Langmuir isotherm. The results show that the tangent of the phase angle is proportional to κ_s/ω (κ_s=rate constant of the electrochemical reaction). When ω→o, the phase angle tends towards 90°: the faradaic impedance becomes purely capacitive. The equation of the a.c. polarogram has been derived; whatever κ_s/ω, the peak height is proportional to the bulk concentration of the reactant, to τ^7/6 (τ=drop time), and to h^?1/2 (h=height of the mercury reservoir). When κ_s/ω→∞, the shape of the a.c. wave is identical to that of a “diffusion-controlled” a.c. wave. The experimental results obtained by a.c. polarography for the three systems azo-hydrazobenzene, benzo(c)cinnoline-dihydrobenzo(c)cinnoline and phenazine-dihydrophenazine are in excellent agreement with the theoretical predictions.     

Monitoring of Methyldopa by Fast Fourier Transform Continuous Cyclic Voltammetry at Gold Microelectrode

A continuous cyclic voltammetric study of methyldopa at gold micro electrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorpted at 400 mV, giving rise to change in the current of well-defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest one of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal-to-noise ratio has significantly increased by application of discrete Fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10－7—1.0×10－11 mol•L－1 (r＝0.9975) with a limit of detection and quantitation 0.004 nmol•L－1 and 0.03 nmol•L－1, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay methyldopa in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the methyldopa were considered.     

Study on the Electrochemical Behavior of Melatonin with an Activated Electrode

It was found that melatonin could be incorporated and accumulated on the surface of the glassy carbon electrode which was activated electrochemically by pretreatment in sodium hydroxide solution by means of cycling the potential well into the positive limit of the solvent. In Britton‐Robinson buffer solution (pH 6.7), melatonin gave a sensitive oxidation wave at a potential of +0.65 V (vs.Ag/AgCl) by using Osteryoung square‐wave stripping voltammetry (OSWSV). The oxidation process has been shown to be irreversible and adsorption‐controlled at this electrode by means of cyclic voltammetry and linear sweep voltammetry. A chronocoulometric characterization of the adsorption characteristics of melatonin at this electrode is also presented. The factors affecting the peak current were optimized, and the dependence of peak currents on the concentration of melatonin was found to be linear in the range 8.0×10^?7?1.0×10^?5 mol L^?1. A detection limit of 5.0×10^?8 mol L^?1 was obtained (signal‐to‐noise ratio of 3). This method was applied to the assay of melatonin in tablets and capsules with good recoveries (98–100%).     

Electrochemical Oxidation of Tryptophan and Its Analysis in Pharmaceutical Formulations at a Poly(Methyl Red) Film-Modified Electrode

A poly(methyl red) film-modified glassy carbon electrode was fabricated and the oxidation behavior of tryptophan at the modified electrode was investigated by cyclic and linear sweep voltammetry. The oxidation peak current of tryptophan at the modified electrode increased significantly, and the oxidation process was irreversible and adsorption-controlled. An analytical method was developed for the determination of tryptophan in a phosphate buffer solution at pH 3.5. The anodic peak current varied linearly with a tryptophan concentration in the range 1.0 × 10^?7 to 1.0 × 10^?4 mol/L with a limit of detection of 4.0 × 10^?8 mol/L. The proposed method was successfully applied to determine tryptophan in composite amino acid injections.     

氢氧化镧钠米线对多倍斯伏安响应的增敏作用及其应用

氢氧化镧钠米线修饰碳糊电极对多倍斯伏安响应有明显的增敏作用,其特征是多倍斯一对氧化还原峰的峰电流增大和峰电位差减小。这种增敏作用是由于氢氧化镧钠米线修饰电极有效面积的增大以及氢氧化镧钠米线与多倍斯间的化学作用。基于多倍斯在氢氧化镧钠米线修饰碳糊电极上灵敏的氧化峰,用线性扫描伏安法测定多倍斯,线性范围是3.0×10^-10～1.0×10^-8 mol·L^-1,检测限达5×10^-11mol·L^-1。     

L-Cysteine Modified Silver Electrode and Its Application to the Study of the Electrochemistry of Hemoglobin

Abstract

L-cysteine can be modified onto a silver electrode by covalent binding through the sulphur to give very stable and long-lived chemically modified electrodes(CMEs). Hemoglobin(Hb) exhibits an excellent voltammetric response at the resulting CMEs. Linear sweep voltammetric(LSV) measurements of Hb on the CMEs reveal the existence of a linear relationship between the cathodic peak current and the concentration of Hb in the range of 5 X 10^?7 - 1 X 10^?5 mol/L. The detection limit is about 2 X 10^?7 mol/L. The relative standard deviation of results is 4.5% for 10 successive determinations at 2 X 10^?6 mol/L. Other proteins and chemicals present in samples do not interfere in the assay.     

Sensitive determination of bisphenol A in plastic products by derivative voltammetry using an acetylene black paste electrode coated with salicylaldehyde-modified chitosan

A sensitive and reliable electrochemical method was developed for determination of bisphenol A (BPA) in plastic products using an acetylene black paste electrode coated with salicylaldehyde-modified chitosan (denoted as S-CHIT/ABPE). In the second-order derivative linear sweep voltammetry technique, BPA yielded a very sensitive and well-defined oxidation peak at 842?mV in 0.2?mol?L^?1 HCl solution. Owing to its unique structure and extraordinary properties, S-CHIT/ABPE showed higher accumulation efficiency toward BPA compared with bare ABPE, and significantly enhanced the oxidation peak current of BPA. Under the optimum conditions, the oxidation peak current was proportional to the concentration of BPA over the range of 4.0?×?10^?8?mol?L^?1?～?1.0?× 10^?5?mol?L^?1. The detection limit (S/N?=?3) was 2.0?×?10^?8?mol?L^?1. The fabricated S-CHIT/ABPE not only exhibited strong adsorption capacity toward BPA, but also provided remarkable stable and quantitatively reproducible analytical performance. Additionally, this newly-developed method possesses some obvious advantages including high sensitivity, extreme simplicity, rapid response and low cost.     

Ferrocene as a Reference Redox Couple for Aprotic Ionic Liquids

The electrochemical behavior of ferrocene has been studied in a number of room temperature ionic liquids. Diffusion‐controlled, well‐defined anodic and cathodic peaks were found for the Fc/Fc⁺ (ferrocene/ferrocenium) oxidation/reduction on the gold electrode. Ohmic resistance R between working and auxiliary electrodes was deduced from impedance measurements. Cyclic voltammograms were corrected for the base line current as well as for the ohmic drop (IR). The formal potential 1/2(E_pa+E_pc) for ferrocene reduction/oxidation in aprotic ionic liquids tested is within a relatively narrow range and may be approximated by the value of 0.527±0.018 V (against the cryptate Ag/Ag⁺222 in acetonitrile reference). Ferrocene diffusion coefficients, calculated from the peak current dependence on the sweep rate, were of the order of 10^?7 cm² s^?1.     

Electrochemical study on interaction of vincristine with tubulin

In Tris (0.005 mol/L)‐NaCl (0.05 mol/L) buffer solution (pH = 7.10), keeping temperature at 37°C, a highly sensitive reduction peak of the antitumor agent was obtained by linear sweep voltammetry. The peak potential is‐1.56 V (vs. SCE). The peak current is proportional to the concentration of vincristine over the range of 2.1 ± 10^?7‐4.2 ± 10^?6 mol/L with the detection limit of 1.0 ± 10^?7 mol/L. The behavior of the binding of vincristine to tubulin was studied. The results showed that the reaction of tubulin dimer with vincristine formed an electrochemically active complex to be 1:2. Its stability constant is 2.5 ± 10¹⁴. The reduction process of the complex is irreversible with adsorptive characteristics.     

Polarographic Behavior of Gemfibrozil in the Presence of Dissolved Oxygen and Its Analytical Application

The polarographic behavior of gemfibrozil is investigated in 0.2 mol L^?1 KH₂PO₄‐Na₂HPO₄ (pH 5.8±0.1)‐8% ethanol supporting electrolyte in the absence and the presence of dissolved oxygen. The results demonstrate that the polarographic reduction peak at ca. ?1.17 V is a catalytic hydrogen wave after deaeration, and the enhanced reduction peak in the presence of dissolved oxygen is the so‐called parallel catalytic hydrogen wave. Based on the parallel catalytic hydrogen wave, a novel method has been developed for the determination of gemfibrozil by single sweep polarography. Calibration plot is linear in the range of 1.8×10^?7–2.4×10^?6 mol L^?1 and detection limit is 9.0×10^?8 mol L^?1. The proposed method is applied to the direct determination of the gemfibrozil in pharmaceutical preparations. The proposed method is simpler, faster and more sensitive than the known methods for gemfibrozil analyses.     

Studies on Polarographic Adsorptive Wave of the System of the Rare Earth (III)-Copper(Ii)-M-Trifluomethyl Chlorophosphonazo

Abstract

A new heteronuclear complex, rare earth (III)-copper (II)-m-trifluomethyl chlorophosphonazo (CPA-mCF₃) system for determining trace rare earth ions is presented. In a medium of 0.02mol/L NH₄Cl,1. 0×10^?3mol/L Cu(II),1.0×10^?5 mol/L CPA-mCF₃, a very sensitive polarographic adsorptive wave is observed by using a single sweep oscillopolarograph at about –0.83V (vs. Ag/AgCl). The linear relationship between the peak current and the concentration of rare earth exists from 6. 0×10^?9 to 1. 0×10^?6 mol/L. The detection limit of rare earth is down to 2. 0×10^?9 mol/L for Tm³⁺. This method has been applied to determine trace RE in several samples of Chinese tea. The results are satisfactory. The composition of the complex is detected as RE (II): Cu (II): CPA-mCF₃ = 1: 1: 2.     

Acetylferrocene Modified Carbon Paste Electrode; A Sensor for Electrocatalytic Determination of Hydrazine

The electrocatalytic oxidation of hydrazine at a carbon paste electrode spiked with acetylferrocene as a mediator was studied by cyclic voltammetry, differential pulse voltammetry, and chronoamperometry. In contrast to other ferrocenic compounds, acetylferrocene exhibits a chemical irreversible behavior, but it can act as an effective mediator for electrocatalytic oxidation of hydrazine, too. The heterogeneous electron transfer rate constant between acetylferrocene and the electrode substrate (carbon paste) and the diffusion coefficient of spiked acetylferrocene in silicon oil were estimated to be about 3.45×10^?4 cm s^?1 and 4.45×10^?9 cm² s^?1, respectively. It has been found that under the optimum conditions (pH 7.5) the oxidation of hydrazine occurs at a potential of about 228 mV less positive than that of an unmodified carbon paste electrode. The catalytic oxidation peak current of hydrazine was linearly dependent on its concentration and the obtained linear range was 3.09×10^?5 M–1.03×10^?3 M. The detection limit (2σ) has been determined as 2.7×10^?5 M by cyclic voltammetry. Also, the peak current was increased linearly with the concentration of hydrazine in the range of 1×10^?5 M–1×10^?3 M by differential pulse voltammetry with a detection limit of 1×10^?5 M. This catalytic oxidation of hydrazine has been applied as a selective, simple, and precise new method for the determination of hydrazine in water samples.     

Monitoring of Anti Cancer Drug Letrozole by Fast Fourier Transform Continuous Cyclic Voltammetry at Gold Microelectrode

A continuous cyclic voltammetric study of letrozole at gold microelectrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorbed at ?200 mV, giving rise to change in the current of well‐defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal‐to‐noise ratio has significantly increased by application of discrete Fast Fourier Transform (FFT) method, background subtraction and two‐dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10^?7?1.0×10^?10 mol/L (r=0.9975) with a limit of detection and quantitation 0.08 nmol/L and 0.15 nmol/L, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay letrozol in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the letrozol were considered.     

Voltammetric Behavior of Sodium 7-Methoxyl-4＇-hydroxylisoflavone-3＇-sulfonate and Its Application

Voltammetric behavior of sodium 7‐methoxyl‐4′‐hydroxylisoflavone‐3′‐sulfonate (SMHS) in the aqueous solution from pH 1 to 5 was studied by linear sweep voltammetry, cyclic voltammetry and normal pulse voltammetry. Experimental results showed that in 0.2 mol*L^?1 sodium citrate‐hydrochloric acid buffer solution (pH=4.65), SMHS caused only one reduction wave at ?1.34 V (vs. saturated calomel electrode, SCE), which was an h‐reversible adsorptive wave of SMHS protonized involving one electron and one proton. The peak current of SMHS on linear sweep voltammogram was proportional to its concentration in the range of 8.0 × 10 ?8.0·10 mol*L^?1 (r = 0.995). and the detection limit was 5.0·10^?‐⁶mol*L^?1. The method was applied to determination of SMHS, in synthetic samples. In addition, its scavenging effect on superoxide anion radical was studied by the auto‐oxidation of pyrogallol in HCI‐tris buffer solution (pH = 8.2) in order to explain its peculiar biological effects. The experimental results proved that SMHS has antioxidant quality, and it is an efficient free radical scavenger of superoxide anion radical.     

Linear-sweep voltammetry and the simultaneous determination of xanthine and xanthosine at the glassy carbon electrode

Linear sweep voltammetry of xanthine and xanthosine has been studied at a sweep rate of 10mVs⁻¹ in phosphate buffers with different pH values. Based on the linear relation of peak current versus concentration, the simultaneous determination of both the compounds was carried out.     

Electrochemical studies of determination of C.I. Direct Red 80 based on a gold nanoparticles-modified carbon paste electrode

In this paper, a simple, convenient and sensitive electrochemical method has been developed for the determination of C.I. Direct Red 80. A gold nanoparticle modified carbon paste electrode was fabricated and used for study and sensitive determination of Direct Red 80 by cyclic voltammetry and differential pulse voltammetry. The overall analysis involved a two-step procedure: an accumulation step under open-circuit conditions, followed by voltammetric measurements of Direct Red 80 in a 0.1?M phosphate buffer solution at pH?=?3.0. The experimental conditions, such as the medium, pH and accumulation time, were optimised. The oxidation peak current was proportional to the concentration of Direct Red 80 from 5.0?×?10^?8 to 5.0?×?10^?7?M and 5.0?×?10^?7 to 3.0?×?10^?6?M, and the detection limit was 1.15?×?10^?8?M (S/N?=?3). The proposed method was used to detect Direct Red 80 in natural water and sewage with good accuracy.     

Electrochemical Studies and Square‐Wave Adsorptive Stripping Voltammetry of Spironolactone Drug

Abstract

A sensitive and reliable stripping voltammetric method was developed to determine Spironolactone drug. This method is based on the adsorptive accumulation of the drug at a hanging mercury drop electrode and then a negative sweep was initiated, which yield a well defined cathodic peak at ?1000 mV versus Ag/AgCl reference electrode. To achieve high sensitivity, various experimental and instrumental variables were investigated such as supporting electrolyte, pH, accumulation time and potential, drug concentration, scan rate, frequency, pulse amplitude, convection rate and working electrode area. The monitored adsorptive current was directly proportional to the concentration of Spironolactone and it shows a linear response in the range from 1×10^?8 to 2.5×10^?7 mol l^?1 (correlation coefficient=0.999) and the detection limit (S/N=3) is 1.72×10^?10 mol l^?1 at an accumulation time of 90 sec. The developed AdSV procedure shows a good reproducibility, the relative standard deviation RSD% (n=8) at a concentration level of 1.5×10^?7 mol l^?1 was 1.4%, whereas the method accuracy was indicated via the mean recovery of 97.5%±2.04. Possible interferences by several substances usually present in the pharmaceutical formulations have been also evaluated. The applicability of this approach was illustrated by the determination of Spironolactone in pharmaceutical preparation and biological fluids such as serum and urine.     

Differential Pulse Polarographic Determination of Moxifloxacin Hydrochloride in Pharmaceuticals and Biological Fluids

Abstract

A simple, fast, sensitive and fully validated differential pulse polarographic (DPP) method for the determination of trace amounts of moxifloxacin in pharmaceutics, serum and urine is reported. Moxifloxacin exhibited irreversible cathodic peak over the pH 5.00–11.00 in Britton–Robinson (B–R) buffer. At pH 10.00 (the analytical pH), a well‐defined peak at ?1.61 V versus saturated calomel electrode was obtained. The current has been characterized as being diffusion‐controlled process. The diffusion current constant (i_d) was 1.48±0.12 and the current–concentration plot was rectilinear over the range from 5×10^?7 to 1×10^?4 M with correlation coefficient (n=10) of 0.995.

The proposed method was applied to commercial tablets and average percentage recovery was in agreement with that obtained by spectrophotometric comparison method. The method was extended to the in vitro determination of moxifloxacin in spiked human serum and urine.     

Indirect Differential Pulse Voltammetric Determination of Aluminum Biological Samples in the Presence of 3, 4-Dihydroxyphenylalanine

ABSTRACT

Indirect differential pulse voltammetric (DPV) determination of aluminum in the presence of 3, 4-dihydroxyphenylalanine (L-dopa) with glass carbon electrode as working electrode has been described. The method relies on the decrease of DPV anodic peak current of L-dopa with the addition of Al^III The decreasing value of the peak current is linear with the increase of Al^III concentration. Under the optimum experimental conditions (pH 4.8, 6×10^?4 M L-dopa, 0.06M NaAc - HAc ¹buffer solution), the linear ranges are 4.0×10^?7 - 5.2×10^?6 M and 7.2×10^?6 - 4.5×10^?5 M. The relative standard deviation for 8×10^?6 M aluminum is 1.0% (n = 8) and the detection limit is 3.5×10^?7 M. A number of foreign species for interference have been studied. The method has been applied to determine aluminum in drinking water, synthetic renal dialysate and urine samples.