<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Runaway reaction on <Emphasis Type="Italic">tert</Emphasis>-butyl peroxybenzoate by DSC tests

Tert-butyl peroxybenzoate (TBPB) is one of the sensitive and hazardous chemicals which have been popularly employed in petrifaction industries in the past. This study attempted to elucidate its unsafe characteristics and thermally sensitive structure so as to help prevent runaway reactions, fires or explosions in the process environment. We employed differential scanning calorimetry (DSC) to assess the kinetic parameters (such as exothermic onset temperature (T ₀), heat of reaction (ΔH), frequency factor (A)), and the other safety parameters using four different scanning rates (1, 2, 4 and 10°C min⁻¹) combined with curve-fitting method. The results indicated that TBPB becomes very dangerous during decomposition reactions; the onset temperature and reaction heat were about 100°C and 1300 J g⁻¹, respectively. Through this study, TBPB accidents could be reduced to an accepted level with safety parameters under control. According to the findings in the study and the concept of inherent safety, TBPB runaway reactions could be thoroughly prevented in the relevant plants.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Selective aerobic oxidation of cyclohexyl- and <Emphasis Type="Italic">sec</Emphasis>-alkylarenes to hydroperoxides in the presence of <Emphasis Type="Italic">N</Emphasis>-hydroxyphthalimide

The review summarizes the available scientific and technical information on aerobic oxidation of cyclohexyl- and sec-alkylarenes to tertiary hydroperoxides in the presence of N-hydroxyphthalimide. Kinetics, oxidation mechanism, catalytic and initiating ability of N-hydroxyphthalimide were discussed.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Synthesis and cytotoxic activity of derivatives of 6<Emphasis Type="Italic">Z</Emphasis>-acetylmethylenepenicillanic acid <Emphasis Type="Italic">tert</Emphasis>-butyl ester

The sulfoxide of 6Z-[2-(methoxyimino)propylidene]penicillanic acid tert-butyl ester and the sulfones of 6Z-[2-(hydroxyimino-, methoxyimino-, benzyloxyimino-, 2-bromo- and 4-bromobenzyloxyimino)-propylidene]penicillanic acid in the syn and anti forms have been synthesized by the condensation of the sulfoxide and sulfone of 6Z-acetylmethylenepenicillanic acid tert-butyl ester with hydroxylamine, methoxyamine, benzyloxyamine, 2-bromo- and 4-bromobenzyloxyamines. The syn and anti isomers of 3Z-(2-methoxyiminopropylidene)-4R-(benzothiazolyl-2-dithio)-2-oxoazetidinyl-1R-(2-propenyl)acetic acid tert-butyl ester were obtained by opening of the thiazolidine ring in 6Z-[2-(methoxy-imino)propylidene]-1-oxopenicillanic acid tert-butyl ester with 2-mercaptobenzothiazole. The 3Z-(2-methoxyiminopropylidene)-4R-(methylsulfonyl)-2-oxoazetidinyl-1-(2-propylidene)acetic acid tert-butyl ester was synthesized by the interaction of 1,8-diazobicyclo[5.4.0]undec-7-ene and methyl iodide with 6Z-[2-(methoxyimino)propylidene]-1,1-dioxopenicillanic acid tert-butyl ester. A dependence of the cytotoxic effect in relation to cancer and normal cells in vitro on the structure of the substituent in position 6 and the syn and anti isomerism of the oxyimino group was established for the synthesized compounds.     

Synthesis of chiral glycolurils from (<Emphasis Type="Italic">S</Emphasis>)-(+)- and (<Emphasis Type="Italic">R</Emphasis>)-(-)-1-<Emphasis Type="Italic">sec</Emphasis>-butyl-3-methylurea

Chiral dialkyl- and tetraalkylglycolurils have been obtained using chiral (S)-(+)- and (R)-(-)-1-sec-butyl-3-methylurea as starting materials. The diastereomer (S)-(+)-2,6-di-sec-butyl-4,8-dimethyl-2,4,6,8-tetraazabicyclo[3.3.0]-octane-3,7-dione was separated into stereoisomers, for the higher melting of which the absolute configuration was determined as (S,S,S,S) by X-ray structural analysis.     

Heat capacities and thermodynamic properties of (<Emphasis Type="Italic">S</Emphasis>)-<Emphasis Type="Italic">tert</Emphasis>-butyl 1-phenylethylcarbamate

An N-tert-butyloxycarbonylated organic synthesis intermediate, (S)-tert-butyl 1-phenylethylcarbamate, was prepared and investigated by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). The molar heat capacities of (S)-tert-butyl 1-phenylethylcarbamate were precisely determined by means of adiabatic calorimetry over the temperature range of 80-380 K. There was a solid–liquid phase transition exhibited during the heating process with the melting point of 359.53 K. The molar enthalpy and entropy of this transition were determined to be 29.73 kJ mol⁻¹ and 82.68 J K⁻¹ mol⁻¹ based on the experimental C _p–T curve, respectively. The thermodynamic functions, [H_T⁰ - H_298.15⁰ H_{T}^{0} - H_{298.15}^{0} ] and [S_T⁰ - S_298.15⁰ S_{T}^{0} - S_{298.15}^{0} ], were calculated from the heat capacity data in the temperature range of 80–380 K with an interval of 5 K. TG experiment showed that the pyrolysis of the compound was started at the temperature of 385 K and terminated at 510 K within one step.     

<Emphasis Type="Italic">N</Emphasis>-allyl and <Emphasis Type="Italic">N</Emphasis>-propargyl trifluoromethanesulfonimides. Theoretical analysis

Tautomers of N-allyl- and N-propargyl-substituted trifluoromethanesulfonimides (CF₃SO₂)₂NR (R = CH₂CH=CH₂, Z/E-CH=CHMe, CH₂C≡CH, CH=CH=CH₂, C≡CCH₂) were calculated by the DFT (B3LYP, wB97XD, PBE1PBE), MP2, and CBS-QB3 methods. The results were compared with the theoretical data for the corresponding amines and amides NHRR¹ (R¹ = H, CF₃SO₂). It was shown that there is no conjugation between the nitrogen atom and C=C bond and that conjugation exists with the C≡C bond with electron density displacement toward the nitrogen atom. The calculations of anions derived from N-allyl- and N-propargyl-trifluoromethanesulfonimides revealed the possibility of their rearrangement with elimination of trifluoromethanesulfinate anion and formation of its H-complex with N-(prop-2-en-1-ylidene)trifluoromethanesulfonamide or N-(prop-2-yn-1-ylidene)trifluoromethanesulfonamide.     

Evaluation of the <Emphasis Type="Italic">Q</Emphasis><Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> absorption band maximum in a light-harvesting complex of the bacterial photosynthetic center <Emphasis Type="Italic">Thermochromatium tepidum</Emphasis>

Excitation energies of the bacteriochlorophyll (BChl) chromophores embedded in the photosynthetic light-harvesting complex of the purple bacterium Thermochromatium tepidum are computed using the time-dependent density functional theory based upon the fragmental molecular orbital (FMO-TDDFT) method. The results are correlated with the empirically based estimates of the Q _y absorption maximum, as well as with the observed large red shift induced by the binding of calcium.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.     

Synthesis of 6-methyl-8<Emphasis Type="Italic">H</Emphasis>-dibenzo[<Emphasis Type="Italic">a</Emphasis>,<Emphasis Type="Italic">g</Emphasis>]quinolizin-8-imines <Emphasis Type="Italic">via Reissert</Emphasis> compounds

Alkylation of Reissert compounds derived from 3-methylisoquinolines with several 2-cyanobenzylbromides followed by hydrolytic cleavage provided the corresponding 1-benzyl-3-methylisoquinolines. Treatment of the latter with methylmagnesiumiodide caused cyclization to the title compounds rather than formation of 2-acetylbenzylisoquinolines.     

Analysis of <Emphasis Type="Italic">Escherichia coli</Emphasis> nicotinate mononucleotide adenylyltransferase mutants <Emphasis Type="Italic">in vivo</Emphasis> and <Emphasis Type="Italic">in vitro</Emphasis>

Background  

Adenylation of nicotinate mononucleotide to nicotinate adenine dinucleotide is the penultimate step in NAD⁺ synthesis. In Escherichia coli, the enzyme nicotinate mononucleotide adenylyltransferase is encoded by the nadD gene. We have earlier made an initial characterization in vivo of two mutant enzymes, NadD72 and NadD74. Strains with either mutation have decreased intracellular levels of NAD⁺, especially for one of the alleles, nadD72.     

Molecular structure of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">o</Emphasis>-and <Emphasis Type="Italic">p</Emphasis>-hydroxybenzyl)cytisine

The molecular structures of N-(o-and p-hydroxybenzyl)cytisine were investigated by NMR spectroscopy, x-ray structure analysis, and molecular modeling. It was found that NMR resonances of the OH and aromatic protons in N-(o-hydroxybenzyl)cytisine were doubled because of the presence of two conformers in solution. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 165–168, March–April, 2008.     

Alkylation of pyrocatechol in <Emphasis Type="Italic">tert</Emphasis>-butyl alcohol-sulfuric acid-benzene

Alkylation of pyrocatechol with tert-butyl alcohol in benzene in the presence of sulfuric acid gave 3,5-di-tert-butylbenzene-1,2-diol in a higher yield than in analogous reaction with tert-butyl alcohol. This result was rationalized by reduction of inhibitory effect of liberated water, formation of heterogeneous system, and occurrence of the alkylation process in nonpolar organic phase. Intermediate products were identified and found to undergo intra- and intermolecular tert-butyl group transfer with formation of more stable 3,5-di-tertbutylbenzene-1,2-diol. The formation of p-di-tert-butylbenzene indicated participation of benzene in crossalkylation processes.     

<Emphasis Type="Italic">Arcopilus aureus</Emphasis>, a Resveratrol-Producing Endophyte from <Emphasis Type="Italic">Vitis vinifera</Emphasis>

Due to great interest on producing bioactive compounds for functional foods and biopharmaceuticals, it is important to explore the microbial degradation of potential sources of target biomolecules. Gallotannins are polyphenols present in nature, an example of them is tannic acid which is susceptible to enzymatic hydrolysis. This hydrolysis is performed by tannase or tannin acyl hydrolase, releasing in this way, biomolecules with high-added value. In the present study, chemical profiles obtained after fungal degradation of tannic acid under two bioprocesses (submerged fermentation (SmF) and solid state fermentation (SSF)) were determined. In both fermentation systems (SmF and SSF), Aspergillus niger GH1 strain and tannic acid as a sole carbon source and inducer were used (the presence of tannic acid promotes production of enzyme tannase). In case of SSF, polyurethane foam (PUF) was used like as support of fermentation; culture medium only was used in case of submerged fermentation. Fermentation processes were monitored during 72 h; samples were taken kinetically every 8 h; and all extracts obtained were partially purified to obtain polyphenolic fraction and then were analyzed by liquid chromatography-mass spectrometry (LC-MS). Molecules like gallic acid and n-galloyl glucose were identified as intermediates in degradation of tannic acid; during SSF was identified ellagic acid production. The results obtained in this study will contribute to biotechnological production of ellagic acid.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-and <Emphasis Type="Italic">C</Emphasis>-trimethylsilyl-substituded anililes

N-Metallation of bromoanilines with ethylmagnesium bromide followed by a reaction with trimethylchlorosilane provided N-mono and N-bis(trimethylsilyl)bromoanilines depending on the structure of substrate. The metallation of bissilylated bromoanilines with butyllithium permitted the introduction of a trimethylsilyl substituent in the aromatic ring. Previously unknown 2-bromo-N,N-bis(trimethylsilyl)aniline, 2,6-dibromo-N-trimethylsilylaniline, 2,6-dibromo-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilylaniline, 2-bromo-6-trimethylsilyl-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilyl-N-trimethylsilylaniline, 2,4,6-tribromo-N-trimethylsilylaniline, and 2,4,6-tribromo-N,N-bis(trimethylsilyl)aniline were prepared. The structures of the compounds obtained were established by the chromato-mass spectrometry and ¹H, ¹³C, and ²⁹Si NMR spectroscopy.