Studies with model membranes. X. Evaluation of the thermodynamically effective fixed charge density and permselectivity of mercuric and cupric iodide parchment-supported membranes

Thermodynamically effective fixed charge densities of mercuric and cupric iodide parchment supported membranes were estimated by methods of Teorell, Meyer, and Sievers; Altug and Hair; and the most recent one of Kobatake and co-workers based on the thermodynamics of irreversible processes. The two limiting forms of Kobatake's equation for dilute and concentrated ranges gave identical values of charge densities. It is interesting to note that these two values of limiting cases are closer to the Teorell-Meyer-Sievers and Altug-Hair values. The theoretical predictions for membrane potential by the Kobatake equation were borne out quite satisfactorily by experimental results obtained with both the membranes.     

Studies with model membranes

Summary Thermodynamic effective fixed charge densities of mercuric phosphate and carbonate parchment supported membranes were evaluated by a number of methods particularly those ofTeorell-Meyer-Sievers, Altug andHair andKobatake et al. The value of the permselectivity was obtained for the two membranes based onKobatake et al. procedure. Membrane transport number was calculated using a modified Nernst relation and compared with the values determined by the TMS method. The theoretical predictions for membrane potential usingKobatake et al. equation are borne out quite satisfactorily by our experimental results for both membrane.

---

Zusammenfassung Es wurden die Dichte der fixierten Ladungen von Quecksilberphosphat und Quecksilberkarbonat-Niederschlagsmembranen nach den Methoden vonTorell-Meyer-Sievers, Altug undHair undKobatake bestimmt. Weiterhin wurden Durchlässigkeit und Transportzahlen ermittelt und mit Werten der TMS-Methode verglichen. Theoretische Voraussagen über das Membranpotential nach den Gleichungen vonKobatake stimmen mit den experimentellen Ergebnissen überein.

---

---

With 8 figures and 3 tables     

Benzothiadiazole vs. iso-Benzothiadiazole: Synthesis,Electrochemical and Optical Properties of D–A–D Conjugated Molecules Based on Them

This paper presents an improved synthesis of 4,7-dibromobenzo[d][1,2,3]thiadiazole from commercially available reagents. According to quantum-mechanical calculations, benzo[d][1,2,3]thiadiazole (isoBTD) has higher values of E_LUMO and energy band gap (E_g), which indicates high electron conductivity, occurring due to the high stability of the molecule in the excited state. We studied the cross-coupling reactions of this dibromide and found that the highest yields of π-spacer–acceptor–π-spacer type compounds were obtained by means of the Stille reaction. Therefore, 6 new structures of this type have been synthesized. A detailed study of the optical and electrochemical properties of the obtained π-spacer–acceptor–π-spacer type compounds in comparison with isomeric structures based on benzo[c][1,2,5]thiadiazole (BTD) showed a red shift of absorption maxima with lower absorptive and luminescent capacity. However, the addition of the 2,2′-bithiophene fragment as a π-spacer resulted in an unexpected increase of the extinction coefficient in the UV/vis spectra along with a blue shift of both absorption maxima for the isoBTD-based compound as compared to the BTD-based compound. Thus, a thorough selection of components in the designing of appropriate compounds with benzo[d][1,2,3]thiadiazole as an internal acceptor can lead to promising photovoltaic materials.     

Observation and implications of high mass-to-charge ratio ions from electrospray ionization mass spectrometry

High mass-to-charge ratio ions (> 4000) from electrospray ionization (ESI) have been observed for several proteins, including bovine cytochrome c (M _r 12,231) and porcine pepsin (M _r 34,584), by using a quadrupole mass spectrometer with an m/z 45,000 range. The ESI mass spectrum for cytochrome c in an aqueous solution gives a charge state distribution that ranges from 12 + to 2 +, with a broad, low-intensity peak in the mass-to-charge ratio region corresponding to the [M + H]⁺ ion. the negative ion ESI mass spectrum for pepsin in 1% acetic acid solution shows a charge state distribution ranging from 7? to 2?. To observe the [M - H]^? ion, harsher desolvation and interface conditions were required. Also observed was the abundant aggregation of the protens with average charge states substantially lower than observed for their monomeric counterparts. The negative ion ESI mass spectrum for cytochrome c in 1–100 mM NH₄OAc solutions showed greater relative abundances for the higher mass-to-charge ratio ions than in acuidic solutions, with an [M - H]^? ion relative abundance approximately 50% that of the most abundant charge state peak. The observation that protein aggregates are formed with charge states comparable to monomeric species (at fower mass-to-charge ratios) suggests that the high mass-to-charge ratio monomers may be formed by the dissociation of aggregate species. The observation of low charge state and aggregate molecular ions concurrently with highly charged species may serve to support a variation of the charged residue model, originally described by Dole and co-workers (Dole, M., et al. J. Chem. Phys. 1968, 49, 2240; Mack, L. L., et al. J. Chem. Phys. 1970, 52, 4977) which involves the Coulombically driven formation of either very highly solvated molecular ions or lower ananometer-diameter droplets.     

Studies with inorganic precipitative membranes: XI. Membrane potential response,characterization and evaluation of effective fixed charge density

Membrane potentials arising across parchment supported nickel and cobalt phosphate membranes when they separete 1:1 electrolyte solutions of concentration c₁ and c₂ such that c₁=10 c₂, have been measured. The membranes in contactwith dilute solutions have been found to carry a negative charge whereas the charge reversal was observed when the membrane was separating concentrated solutions. The membrane potential data have been used according to the procedure prescribed by Teorell-Meyer-Sievers theory (the TMS theory) to derive the value of effective fixed charge density of membranes. The electrical double layer at the membrane-solution interface has been suggested to control the over all rate of diffusion.     

Effect of introduction of heterocyclic moieties into polymer backbone on gas transport properties of fluorinated poly(ether imide) membranes

The effects of incorporation of heterocyclic moieties into fluorinated poly(ether imide) membranes on their gas transport properties were investigated. Four novel fluorinated poly(ether imide) (PEI) membranes were prepared from four different bis(ether amine)s namely, 4,4-bis[3′-trifluromethyl-4′(4′′-aminobenzoxy)bezyl]biphenyl (BAQP); 1,4-bis[3′-trifluromethyl-4′(4′′-aminobenzoxy)bezyl] benzene (BATP); 2,6-bis[3′-trifluromethyl-4′(4′′-aminobenzoxy)bezyl]pyridine (BAPy) and 2,5-bis[3′-trifluromethyl-4′(4′′-aminobenzoxy)bezyl]thiophene (BATh), and a fluorinated dianhydride, 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane (6FDA) as a common dianhydride. Gas transport properties of these membranes were measured to investigate the effect of chemical structure on gas permeation and diffusion processes over four different gases (e.g., CH₄, N₂, O₂ and CO₂) at different temperatures (e.g., 35, 45 and 55 °C) at an applied pressure of 3.5 bar. It has been found that at 35 °C the permselectivities of BAPy and BATh based polymeric membranes (6.4 and 6.6, respectively) toward O₂ relative to N₂ are higher in comparison to BAQP and BATP (5.5 and 5.3, respectively) containing PEI membranes. The permeability coefficient of CO₂ for BAPy and BATh (51.92 and 45.31, respectively at 35 °C) based PEI membranes were observed to be much higher than BAQP and BATP based membranes (36.61 and 33.51, respectively at 35 °C) with comparable selectivity values of CO₂ relative to CH₄. All these membranes exhibit higher CO₂/CH₄ selectivity than those of common glassy polymers e.g., cellulose acetate, polysulfone and polycarbonate. The order of permeability of these gases was found as CO₂ > O₂ > N₂ > CH₄. The temperature dependency of permeation and diffusion processes enables to calculate the activation energies of the permeation and diffusion processes for these four different gases through four PEI membranes.     

Novel Substituted Purine Isosteres: Synthesis,Structure-Activity Relationships and Cytotoxic Activity Evaluation

A number of pyrrolo[2,3-c]pyridines, pyrrolo[3,2-d]pyrimidines and pyrazolo[4,3-d]pyrimidines were designed and synthesized as antiproliferative agents. The target compounds possessed selected substituents in analogous positions on the central scaffold that allowed the extraction of interesting SARs. The cytotoxic activity of the new derivatives was evaluated against prostatic (PC-3) and colon (HCT116) cell lines, and the most potent analogues showed IC₅₀ values in the nM to low µM range, while they were found to be non-toxic against normal human fibroblasts (WI-38). Flow cytometric analysis of DNA content revealed that the most promising derivative 14b caused a statistically significant accumulation of PC-3 cells at G₂/M phase and induced apoptosis in PC-3 cells.     

Study on conformational transition of EVA random copolymer in selective solvent mixtures

The dilute solution property of ethylene-vinyl acetate (EVA) random copolymer in 1,2-dichloroethane/cyclohexane (DCE/CYH) selective solvent mixture has been studied by viscometry, light scattering, differential refractomertry and UV spectrophotometry. It was found that both ethylene- and viny1 acetate sequence associations of EVA random copolymer displayed in both DCE and CYH solvents respectively, especially in DCE. Disassociation appeared when the volume fraction of CYH in the DCE/CYH solvent mixture φ_c was from 0.6 to 0.8. However, in this region, the extreme values of the intrinsic viscosity [η], Huggins constant k^′, unperturbed dimension K_θ, refractive index increment dn/dc occurred, and a discontinuity behavior of the preferential adsorption coefficient λ^′ and UV spectra demonstrated. These phenomena were attributed to conformational transition of the EVA molecule in solution, which was caused by DCE and CYH selective solvents, respectively.     

The influence of pyrocarbon modification on the physicochemical characteristics of the surface of pores and transport properties of inorganic membranes

The structure of pyrocarbon crystallites deposited on the surface of the pore channels of TRUMEM composite inorganic membranes (TiO₂ on porous steel) was studied by X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy. According to the X-ray data, the lattice of pyrocarbon crystallites of size L _c=40.0 nm has hexagonal symmetry with d ₀₀₂=3.368 Å. The deposition of pyrocarbon crystallites with L _c up to 1.5 nm was identified by X-ray photoelectron spectroscopy and scanning electron microscopy. Coating the pore channels of membranes with pyrocarbon decreased the density of the electric charge on their surface by a factor of ～5.5. The temperature dependences of the hydrodynamic permeability coefficient were obtained for the initial and pyrocarbon-modified membranes when polar and nonpolar fluids flowed through them. The electrostatic force and energy of the interaction of ethanol molecules with each other and the surface of pores were calculated; the results were compared with the O-H···O H-bond energy. The main reason for the formation of alcohol adsorption layers was the formation of H-bonds between its molecules and O-H···O atoms on the surface of pores.     

A three-parameter cubic equation of state for asymmetric mixture density calculations

A new three-parameter cubic equation of state of the van der Waals type with one parameter temperature dependent, P = RT/(V − b) − a(T)/[V(V + c) + b(3V + c)], has been developed for representation of liquid volumes (or densities) for asymmetric mixtures such as CO₂C₁₉ and C₁C₁₀. The calculated results are better than those obtained from the two-parameter Peng—Robinson equation, the three parameter Schmidt—Wenzel equation, the volume-translated Soave—Redlich—Kwong equation proposed by Peneloux et al., and the volume-translated Peng—Robinson equation developed in this work. The parameters of the new equation have been generalized in terms of the acentric factor ω and reduced temperature T_r.     

Retention measurements of nanofiltration membranes with electrolyte solutions

Retention measurements with single salt solutions of CaCl₂, NaCl and Na₂SO₄ revealed that the rejection mechanism of commercial polymeric nanofiltration membranes investigated in this study may be divided into two categories:

• 1.Membranes for which Donnan exclusion seems to play an important role.
• 2.Membranes for which retention is determined by both Donnan exclusion and size effects.

In category 1 both positively and negatively charged membranes were found.Ceramic γ-Al₂O₃ ultrafiltration membranes with a pore size of 3 nm showed a same type of salt retention behavior as the positively charged polymeric membranes.The extended Nernst–Planck equation in combination with the Donnan equilibrium has been used to model the flux-retention experiments for the salt solutions. The numerical calculations resulted in a good agreement with experimental data and acceptable values for the fixed charge densities have been determined. The effective membrane thicknesses calculated were higher than those observed by scanning electron microscopy.     

Application of intramolecular cycloaddition/retro cycloaddition reactions for the synthesis of unsymmetrical 2,2′-bipyridine and 2-benzofuropyrazin-2-ylpyridine analogues

1,2,4-Triazines bearing cycloalkeno[c]pyridine substituents at the 5-position, 2a-d, prepared by an intermolecular Diels-Alder reaction of bi-5,5-triazines with cyclic enamines, were provided with an alkynyloxy or a 2-cyanophenoxy group at the 3-position of the triazinyl unit. A subsequent intramolecular Diels-Alder reaction of the former, followed by loss of N₂ leads to two new classes of 2,2′-bipyridine analogues containing different heterocyclic units, namely cycloalkeno[c]pyridine and 2,3-dihydrofuro- or 2,3-dihydropyrano[2,3-b]pyridine 8a-h; the intramolecular reaction of the 2-cyanophenoxy compound gives benzo[4,5]furo[2,3-b]pyrazine 10a-c.     

The structure and ordering of ε-MnO2

The presence of ε-MnO₂ as a major component of electrolytic manganese dioxide (EMD) has been demonstrated by a combined X-ray diffraction/transmission electron microscopy (TEM) study. ε-MnO₂ usually has a partially ordered defect NiAs structure containing 50% cation vacancies; these vacancies can be fully ordered by a low temperature (200 °C) heat treatment to form a pseudohexagonal but monoclinic superlattice.Numerous fine-scale anti-phase domain boundaries are present in ordered ε-MnO₂ and cause extensive peak broadening and a massive shift of a very intense, 0.37 nm superlattice peak. This suggests a radically different explanation of the ubiquitous, very broad ∼0.42 nm peak (∼21-22° 2θ, CuKα radiation) in EMDs, which heretofore has been attributed to Ramsdellite containing numerous planar defects. This work confirms the multi-phase model of equiaxed EMDs proposed by Heuer et al. [ITE Lett. 1(6) (2000) B50; Proc. Seventh Int. Symp. Adv. Phys. Fields 92 (2001)], rather than the defective single-phase model of Chabre and Pannetier [Prog. Solid State Chem. 23 (1995) 1] and Bowden et al. [ITE Lett. 4(1) (2003) B1].     

A novel synthesis of 2'-hydroxy-1',3'-xylyl crown ethers

Six novel 2' - hydroxy - 1',3' - xylyl crown ethers (8a–e and 13)¹ have been synthesized utilizing the allyl group to protect the OH function during the cyclization reaction. The macrocycles 6a-e were formed in yields of 26 to 52%, by intermolecular reaction of 4 - chloro - 2,6 - bis(bromomethyl) - 1 - (2 - propenyloxy)benzene (5) with polyethylene glycols; 6a was also obtained by an intramolecular cyclization reaction of monotosylate 14.A 30-membered ring with a 2' - hydroxy - 1',3' - xylyl sub-unit was obtained in 87% yield by reaction of ditosylate 9 with bis [2 - (o - hydroxyphenoxy)ethyl]ether (11) in the presence of cesium fluoride. The synthesis of crown ethers with a 2' - hydroxy - 1',3' - xylyl sub-unit (1c–e, H for CH₃) by demethylation of the corresponding 2'-methoxy crown ethers 1c–e with lithium iodide were unsuccessful; it would appear that the demethylation reaction is restricted to 15- and 18-membered rings. One of the 2' - hydroxy - 1',3' - xylyl crown ethers 8d forms a crystalline 1:1-complex with water.     

Development of Radiogallium-Labeled Peptides for Platelet-Derived Growth Factor Receptor β (PDGFRβ) Imaging: Influence of Different Linkers

The purpose of this study is to develop peptide-based platelet-derived growth factor receptor β (PDGFRβ) imaging probes and examine the effects of several linkers, namely un-natural amino acids (D-alanine and β-alanine) and ethylene-glycol (EG), on the properties of Ga-DOTA-(linker)-IPLPPPRRPFFK peptides. Seven radiotracers, ⁶⁷Ga-DOTA-(linker)-IPLPPPRRPFFK peptides, were designed, synthesized, and evaluated. The stability and cell uptake in PDGFRβ positive peptide cells were evaluated in vitro. The biodistribution of [⁶⁷Ga]Ga-DOTA-EG₂-IPLPPPRRPFFK ([⁶⁷Ga]27) and [⁶⁷Ga]Ga-DOTA-EG₄-IPLPPPRRPFFK ([⁶⁷Ga]28), which were selected based on in vitro stability in murine plasma and cell uptake rates, were determined in BxPC3-luc-bearing nu/nu mice. Seven ⁶⁷Ga-labeled peptides were successfully synthesized with high radiochemical yields (>85%) and purities (>99%). All evaluated radiotracers were stable in PBS (pH 7.4) at 37 °C. However, only [⁶⁷Ga]27 and [⁶⁷Ga]28 remained more than 75% after incubation in murine plasma at 37 °C for 1 h. [⁶⁷Ga]27 exhibited the highest BxPC3-luc cell uptake among the prepared radiolabeled peptides. As regards the results of the biodistribution experiments, the tumor-to-blood ratios of [⁶⁷Ga]27 and [⁶⁷Ga]28 at 1 h post-injection were 2.61 ± 0.75 and 2.05 ± 0.77, respectively. Co-injection of [⁶⁷Ga]27 and an excess amount of IPLPPPRRPFFK peptide as a blocking agent can significantly decrease this ratio. However, tumor accumulation was not considered sufficient. Therefore, further probe modification is required to assess tumor accumulation for in vivo imaging.     

455 — Effect of pH on the electroactivity of horse heart cytochrome c

The effect of pH on the electroactivity of horse heart cytochrome c has been studied by differential pulse polarography, differential pulse voltammetry at the gold electrode, cyclic voltammetry and spectro-photometry; the gold electrode has been activated by 4.4′-bipyridine. The experimental results have been interpreted on the basis of the existence of a pH-dependent equilibrium between two electroactive cytochrome c forms; in agreement with the Lambeth et al.'s scheme the existence of transient species can be postulated.From spectrophotometric and differential pulse voltammetric experiments the pK_a value of 8.1±0.1 has been calculated for the equilibrium between the neutral and alkaline cytochrome c forms: state III ? state IV+H⁺.     

Separation of isomeric xylenes by pervaporation through cellulose ester membranes

The interaction between the isomeric xylenes and different cellulose esters was investigated using solubility parameter considerations and through measurements of swelling values. p]Hansen's three-dimensional solubility parameters δ_d, δ_p, δ_h of all the components have been calculated. These values have been used to predict the interaction between polymer and penetrant. A measure for this interaction is given by Δ, which is the distance between polymer and penetrant in the δ_d, δ_r, δ_h space. As expected, the experimental swelling values varied in inverse proportion to the calculated Δ values. p]Pervaporation characteristics of different cellulose ester membranes were determined by measuring product rates and selectivity. The differences in membrane characteristics have been explained qualitatively in terms of the solubility parameter concept.     

Influence of ionic liquid content on properties of dense polymer membranes

Pervaporation was used for removal of butan-1-ol from its 5 wt.% of aqueous solution, at which the concentration of Clostridium acetobutylicum starts to decrease. The polydimethylsiloxane (PDMS) membrane containing 0, 10, 20 or 30 wt.% of benzyl-3-butylimidazolium tetrafluoroborate ([BBIM][BF₄]) ionic liquid was used. Differential scanning calorimetry measurements showed that PDMS-[BBIM][BF₄] membranes (though optically homogeneous) contained PDMS and [BBIM][BF₄] phases. Pervaporation selectivity increased and total flux through membranes raised moderately with an increased content of [BBIM][BF₄] in PDMS-[BBIM][BF₄] membranes. Hence, immobilization of a proper ionic liquid in a membrane results in the creation of pervaporation membranes, effective in the removal of alcohol from fermentation broths.     

Regarding the structure of [2.2](2,6,2',7')-naphthalenophane-1,11-diene and its conformational mobility

The synthesis of [2.2](2,6,2',7')naphthalenophane -1,11 - diene 4 has been effected by pyrolysis of the bis-sulphoxide 10, in turn prepared by a ring-contraction procedure of the [3.3]dithiacyclophane 7. The diene 4 has been fully characterized by spectroscopic and chemical methods. The variable-temperature ¹H NMR spectra of the diene 4 indicated that the compound undergoes conformational flipping in solution and has a conformational energy barrier ΔG^≠_25°. 14.9 kcal mol^-1 and a coalescence temperature T_c 38° for the internal protons H_c and H_c' (at 100 MHz). These results differ from those previously recorded. A complete assignment of the pmr spectrum of the cyclophane diene 4 at 270 MHz is presented together with the spectrum of the corresponding saturated [2.2]cyclophane 3.     

Gas separation properties of aromatic poly(amide-imide) membranes

Aromatic poly(amide-imide)s were synthesized using direct 2,2-bis[N-(4-carboxyphenyl)-phthalimidyl] hexafluoropropane (6FDIA) polycondensation with various diamines containing flexible ether groups and bulky substituents. The oxygen and nitrogen gas transport in the poly(amide-imide) membranes was investigate at 35 °C with the pressure between the interval at 2-10 atm. The proposed method is expected to promote the gas permeability of the poly(amide-imide) membrane and maintain the gas selectivity. It was found that both gas permeability and selectivity of poly(amide-imide) membranes increased with increasing fractional free volume and d-spacing. The gas permeability had good correlation with the γ-transition temperature. The bulky pendent group introduced into diamine moiety of poly(amide-imide) could efficiently promote the gas permeability. For the behaviors of gas separation, the gas diffusivity coefficient and solubility selectivity controlled the gas permeability and selectivity, respectively. The sorption behavior of the aromatic poly(amide-imide) membranes can be well explained using the dual mode sorption model. The Langmuir capacity constant and Henry’s law constant increase with FFV increasing. 6F-TBAPS has the best O₂/N₂ separation performance among the poly(amide-imide) membranes.