Adsorption and dissociation equilibrium of benzoic acid on the mercury electrode

Adsorption of benzoic acid at the mercury electrode was studied in a wide pH range. The adsorption isotherms of benzoic acid from electrocapillary and capacity measurements were calculated. From the dependence of capacitance and potential of zero charge on pH the pK_el of benzoic acid was determined.     

The adsorption of acetylacetone at the mercury electrode

Adsorption of acetylacetone at the mercury electrode was studied in a wide pH range. Adsorption from acidic solutions is much stronger than the adsorption from basic solutions. The dependence of the differential capacity of the mercury electrode on the pH resembles the titration curve of acetylacetone. From such curves the pK of acetylacetone was calculated.     

Temperature dependence of adsorption parameters of n-butanol and n-valeric acid at their adsorption on mercury electrode from aqueous solutions

Adsorption parameters that enter into the Frumkin isotherm and the model of two parallel capacitors are calculated based on the data of the regression analysis of differential capacitance curves of a mercury electrode in solutions of n-butanol and n-valeric acid at 25, 50, and 75°C. The analysis of the temperature dependences of these parameters allowed free energies, entropies, and enthalpies of adsorption to be found. It is shown that the hydrophobic effect, which is associated with the increase in the enthalpy of liquid water when adsorbate molecules leave it, makes a substantial contribution into the adsorption free energy of studied compounds.     

Algorithm for calculating the dissociation constants of weak electrolytes and ampholites in water solutions

An algorithm for calculating the dissociation constants of weak organic acids and bases in water solutions is developed on the basis of spectrophotometric data on the UV and visible regions without measuring the рН of the medium or using buffer solutions. The proposed algorithm is tested experimentally for six single-base acids and single-acid bases of different strengths. The relative error in determining the dissociation constants does not exceed 5% and is in agreement with the literature data.     

Thermodynamic dissociation constants of N-phenylbenzohydroxamic acids and benzohydroxamic acid

Thermodynamic association constants of benzohydroxamic acid and several ortho-substituted N-phenylbenzohydroxamic acids have been determined by pH titration in aqueous dioxan media at 25 degrees and 35 degrees . Empirical pH corrections for mixed aqueous media have been applied. The pK(a) values do not vary linearly with the reciprocal of dielectric constant of the medium, but a plot of pK(a) vs. the mole fraction of dioxan is linear at a given temperature. Values of DeltaG degrees , DeltaH degrees and DeltaS degrees are tabulated.     

Medium effects on the acid dissociation constants of some diimine heterocyclic bases

The acid dissociation constants of the protonated form of diimine heterocyclic compounds (imidazole, 2-methylimidazole, 2,2-bipyridyl, and 1,10-phenanthroline) were determinedpH-meterically in aqueous media containing different amounts of organic solvents, viz. amphiprotic (methanol, ethanol), dipolar aportic (DMSO), and low basic aprotic (acetonitrile) at 25±0.1 °C. It was observed that by increasing the amount of alcohol orDMSO in the aqueous medium thepK _a, values of the investigated compounds decreased. On the other hand, thepK _a values increased as the amount of acetonitrile in the medium was increased. These results are discussed in terms of various solvent characteristics. It is concluded that solvent effects, viz. differences in stabilization of the free base by dispersion forces and of the proton by its interaction with solvent molecules in amphiprotic or dipolar aprotic solvent-aqueous media relative to that in pure aqueous one, as well as the basicity effect of acetonitrile play a vital role in the ionisation equilibria of the investigated compounds.

---

Mediumeffekte auf die Säuredissoziationskonstanten einiger heterocyclischer Diimin-Basen

Zusammenfassung Die Säuredissoziationskonstanten der protonierten Formen der heterocyclischen Dimin-Basen Imidazol, 2-Methylimidazol, 2,2-Bipyridyl und 1,10-Phenanthrolin wurdenpH-metrisch in wäßrigem Medium mit einem Anteil an organischen Lösungsmitteln bei 25±0.1 °C bestimmt. Dabei wurden als amphiprotische Zusätze Methanol und Ethanol, als dipolar aprotisches organisches LösungsmittelDMSO und als aprotisches niederer Basizität Acetonitril ausgewählt. Es wurde beobachtet, daß bei ansteigenden Konzentrationen an Alkohol oderDMSO diepK _a-Werte der untersuchten Verbindungen kleiner werden. Andererseits bewirkt Acetonitril ein Ansteigen derpK _a-Werte. Die Ergebnisse werden mittels verschiedener Lösungsmittelparameter diskutiert. Lösungsmitteleffekte wie Stabilisierung der freien Base mittels Dispersionskräften, Protonwechselwirkungen in den verschiedenen Lösungsmittelgemischen und Basizitätseffekte des Acetonitril spielen dabei eine entscheidende Rolle.

     

Thermodynamic parameters related to the specific adsorption of iodide ion on the mercury electrode

The thermodynamic functions for the specific adsorption of the iodide ion on mercury have been determined from capacity measurements at 5°C, 25°C and 45°C. The experimental values of the standard electrochemical free energy, enthalphy and entropy of adsorption at zero charge, Δ$\text{G}$⁰_I^?, Δ$\text{H}$⁰_I^?, and Δ$\text{S}$⁰_I^?, are in good agreement with previous values for chloride and thiocyanate ion adsorption. They show that most of the free energy change comes from the entropy change, suggesting that the structural contributions play an important role in the ion-specific adsorption. The thermodynamic functions are compared with the values calculated using the Andersen—Bockris model.     

Polarography of thiodiglycolic acid and thiodipropionic acid at the dropping mercury electrode

The polarographic behaviour of thiodiglycolic acid (R?S?R) and thiodipropionic acid (R?CH₂?S?CH₂R) at the DME, has been investigated in presence of 0.1 M KCl and 0.01% thymol with respect to the effects of changes in pH, concentration, drop time, and temperature on the wave characteristics. Well-defined irreversible cathodic waves were obtained in the pH range 2.40 to 4.76 for R?S?R and 2.3 to 4.98 for R?CH₂?S?CH₂R. At lower (<2.0) and higher (>5) pH values, ill-defined waves were obtained. The mechanism of the electrode process in aqueous solutions has also been elucidated.     

Solvent effect on the dissociation constants and Soret band maxima of hematoporphyrin diacid

Dissociation constants (K_D) and solvatochromic shifts of the Soret bands of the dicationic form of hematoporphyrin dichloride were measured against the solvatochromic parameters of Taft, Dimroth, Gutmann and Swan. Taft's parameter representing solvent capacity of proton acceptance from the solutes was accepted as the best cybotactic parameter. Soret bands of the spectrum undergo blue shifts upon changing nonpolar to polar solvents. The difference in hydrogen bond energy calculated between the pyrrolic proton and Cl^– in hexane and isopropanol is 2.8 kcal/mol.     

Potentiometric dissociation constants and analytical properties of α-mercaptobenzeneacetic acid

The α-mercaptobenzeneacetic acid has been synthesized and screened for its properties as an analytical reagent. The acid dissociation constants have been determined potentiometrically in 0.1 M KNO₃ and 0.5 M KNO₃ ethanol-water 20% (v/v) solutions at 25 ± 0.1 °C.     

Stripping voltammetry of manganese based on chelate adsorption at the hanging mercury drop electrode

A novel electrochemical stripping approach for the trace measurement of manganese is presented. The metal chelate with erichrome black T is adsorbed on a hanging mercury drop electrode, and the subsequent reduction current of the accumulated chelate is measured by voltammetry. Adsorptive preconcentration for 5 min results in a detection limit of 6 × 10^?10 M (32 l^?1). Cyclic voltammetry is used to characterize the redox and interfacial processes. Optimal experimental conditions include a 0.02 M piperazine-N,N′-bis(2-ethanesulfonic acid) solution (pH 12) containing 1 × 10^?6 M eriochrome black T, a preconcentration potential of ?0.80 V, and a linear potential scan. The response is linear up to 2.9 × 10^?7 M, and the relative standard deviation at 1.8 × 10^?7 M is 1.5%. The effects of possible interferences from metal ions or organic surfactants are evaluated.     

Spectrophotometric determination of the acid dissociation constants for cacodylic acid and p-Nitrophenol at elevated temperatures

Using 2.5-dinitrophenol as an optical indicator, the pK_a of cacodylic acid were spectrophotometrically determined at elevated temperatures under saturation vapor pressures. The result is pK_a = -26.41 + 1296/T + 4.973 InT whereT is in Kelvin. In a similar way, the pK_a ofp-nitrophenol were obtained up to 200‡C giving pK_a = -24.82 + 2135/T + 4.353 InT From these results, several thermodynamic functions of cacodylic acid andp- nitrophenol were calculated.     

Determination of the acid dissociation constants of p-benzohydroquinone by the INDO method

The stepwise acid dissociation constants for p-benzohydroquinone (QH₂) in aqueous media have been explicitly calculated for the first time, with the INDO parametrized SCF –MO method. We have optimized the geometries of QH₂, QH^?, and Q^2? and of the QH₂ · 6H₂O, QH^? · (H₃O⁺) · 5H₂O, and Q^2? · (H₃O⁺)₂ · 4H₂O systems that model the solvated species. The presence of the associated water molecules (and hydronium ions) account for the stabilization due to hydrogen bonding as well as for a part of the effect of interaction of these molecules with the respective reaction fields in an aqueous medium. To simulate the first solvation shell in a more complete manner, four more water molecules have been considered to be placed above and below the quinonoid ring and the optimized geometries of the resulting hydrated species, QH₂ · 10H₂O, QH^? · (H₃O⁺) · 9H₂O, and QH^? · (H₃O⁺) · 8H₂O, have been determined. The standard free-energy changes calculated for the dissociation of QH₂ into QH^? and H⁺ is 0.0251 Hartree (65.9 kJ mol^?1) and that of QH^? into Q^2? and H⁺ is 0.0285 Hartree (74.8 kJ mol^?1). Experimentally observed dissociation constants for these two steps correspond to free-energy changes of 0.0214 Hartree (56.2 kJ mol^?1) and 0.0248 Hartree (65.1 kJ mol^?1), respectively. © 1995 John Wiley & Sons, Inc.     

Bursting and spreading of liposomes on the surface of a static mercury drop electrode

When liposomes suspended in an aqueous electrolyte solution hit the surface of a static mercury drop electrode (SMDE) they burst and spread. These events lead to capacitive signals and allow counting of liposomes as well as the determination of the number of molecules in each liposome.