Effect of ammonia on the Zn(Hg)/Zn(II) electrode reactions in aqueous chloride solutions

The title subject has been studied using single pulse and chronopotentiometric polarization measurements on the Zn(Hg)/Zn(II) electrode and equilibrium measurements on the same and the Zn/Zn(II) electrode, mainly in 2 M NH₄Cl with 0–0.3 M NH₃. At low ammonia concentrations, the Zn(Hg)/Zn(II) reactions are found to occur in two consecutive charge-transfer steps with Zn(I) as intermediate, and with little or no participation of ammonia. At higher ammonia concentrations, however, nearly symmetric transfer by divalent zinc ion (α=0.5 and n=2) to and from diammine species appears to be the predominant charge-transfer step.     

Effect of alkali cations,halides and thiocyanate on the Mn(Hg)/Mn(II) electrode reactions

The title subject has been studied by galvanostatic single-pulse, chronopotentiometric and equilibrium measurements on the Mn(Hg)/Mn(II) electrode (mainly saturated managanese amalgams) in one molar alkali chloride (LiCl, KCl and CsCl) and potassium iodide and thiocyanate solutions of pH 4 to 5 at 25°C. The Mn(Hg)/Mn(II) reactions are found to occur in two consecutive steps with monovalent ions as intermediate in all these solutions. The rates of both the ion-transfer step Mn(Hg)/Mn(I) and the electron-transfer step Mn(I)/Mn(II) appear independent of the cations Li⁺ and K⁺ and of the anions Cl^?, I^? and SCN^?, when differences in bulk activities of electroactive species are corrected for. The Cs⁺ ion, however, seems to retard the reactions more than expected from bulk activity changes, and this can be explained by Cs⁺ specific adsorption or by variations in the properties of the inner layer with the cation.     

Kinetics of Zn/Zn(II) reactions in acidified solutions of potassium chloride

The title subject has been studied using stationary, single-pulse, and chronopotentiometric polarization measurements on the Zn/Zn(II) electrode and equilibrium measurements on the same and the Ag/AgCl electrode in 0.5–4 M chloride solutions at 25°C. The Zn/Zn(II) electrode reactions are found to occur in two consecutive charge-transfer steps with Zn(I) as intermediate. The ion-transfer step Zn/Zn(I) is too fast to exhibit its kinetics. The electron-transfer step Zn(I)/Zn(II) mostly occurs by the couple ZnCl₂(H₂O)_y/ZnCl₂(H₂O)_y, but species with one or no chloride ligand take over as the main electroactive ones at chloride (or salt) concentrations below 1 M. The value of y is not clearly revealed by the data. Some sluggishness in complex equilibration and some, double-layer effects are observed. A convenient scale for single-ion activities is described, used, and recommended.     

Diagrammes potentiel—niveau d'acidite dans les milieux H2OH3PO4—I Systemes electrochimiques ne faisant pas intervenir le proton

The conditional potentials of redox systems not involving protons have been studied as a function of phosphoric acid concentration (1–14M), with the ferricinium/ferrocene couple as the comparison system. The following systems were considered: Cu(II)/Cu, Cd(II)/Cd, Sn(II)/Sn, Zn(II)/Zn, Ag(I)/Ag, Pb(II)/Pb, Hg(II)/Hg, Bi(III)/Bi and particularly Fe(III)/Fe(II) and Fe(II)/Fe. The hexacyanoferrate(III)/hexacyanoferrate(II) and iodine/iodide couples were also studied. The results are presented as a potential—H₃PO₄ concentration diagram (or potential—acidity level diagram).     

On Mn(Hg)/Mn(II) equilibria and reactions in aqueous solution

The title subject has been studied through galvanostatic single-pulse and chronopotentiometric measurements on the Mn(Hg)/Mn(II) electrode and equilibrium measurements on the same and the Ag/AgCl electrode, all in x MMnCl₂+(0.5?x)M MgCl₂ solutions of pH 4.3–4.9 at 25°C. The Mn(Hg)/Mn(II) reactions are found to occur in two consecutive steps, an unsymmetric (α_c near 0.8) ion-transfer step Mn(Hg)/Mn(I) and an essentially symmetric (α_c near 0.5) electron-transfer step Mn(I)/Mn(II). Besides charge transfer, no sluggishness other than diffusion is observed, but the dispersed precipitate Mn₂Hg₅ of saturated amalgam serves as an ageing-dependent source of anodic reactant Mn(Hg). Quantitative kinetic and thermodynamic data are presented and discussed. Comparisons are made to corresponding reactions for the succeeding elements iron, cobalt, nickel, copper, and zinc.     

Kinetics of the Hg(II)/Hg electrode reaction in DMSO solutions of chloride ions

The electrode reaction Hg(II)/Hg in complex chloride solutions with dimethyl sulfoxide as solvent has been investigated at the equilibrium potential by the faradaic impedance method and a cyclic current-step method. The ionic strength was 1 M with ammonium perchlorate as supporting electrolyte, and the temperature was 25°C. Double-layer data have been determined by electrocapillary measurements. From the results of the kinetic measurements at ligand numbers ≤1.1 or ≥2.3 it is concluded that the overall charge transfer proceeds step-wise. The solvated Hg²⁺ and Hg₂²⁺ as well as the complexes HgCl_j^2?j and the dinuclear Hg₂Cl³⁺ contribute to the exchange current density. The rate constant of the step HgCl_j^2?j/ Hg(I) is found to increase with the number of Cl^? coordinated. This increase can be correlated to a decrease in solvation and a lengthening of the Hg?Cl distance. For 1.1 << 2.3, impedance measurements indicate a rate-controlling adsorption step. It is suggested that the uncharged HgCl₂ then forms an adsorbed network on the mercury surface.     

Infrared and Raman spectra of ethylene trithiocarbonate complexes of some Zn(II), Cd(II) and Hg(II) halides

Coordination compounds of ethylene trithiocarbonate (ETTC) with some Zn(II), Cd(II) and Hg(II) halides have been prepared, characterized and their infrared and Raman spectra recorded. The i.r. spectra in the range 4000-400 cm⁻¹ suggest that the organic ligand is bonded to the metal ions through its exocyclic sulphur atom, whereas the far-i.r. and Raman spectra show that the complexes of the type HgX₂(ETTC) (X = Cl, Br or I) possess a trans dimeric halogen-bridged structure. The Cd(II) and Zn(II) species are of the type MX₂(ETTC)₂ and they possess a pseudotetrahedral structure of C_2υ symmetry.     

Determination of electrochemical kinetic parameters by square-wave polarography: Polarographic reduction of Zn(II) in 1 M KCl,KBr, and KNCS solutions

A new method of determining electrochemical kinetic parameters by square-wave polarography was presented, in which the faradaic current at θ/2, θ being the half-period of superimposed square-wave voltage, was used for the analysis. The method gave the following kinetic parameters for the electrode reaction, Zn(II) + 2e(Hg), in aqueous solutions at 25° C: k_c^θ=0.0052 cm s^?1 and α_c=0.36 in 1 M KCl, k_c^θ=0.011 cm s^?1 and α_c=0.30 in 1 M KBr, and k_c^θ=0.020 cm s^?1 and α_c=0.52 in 1 M KNCS. Induced adsorption of Zn(II) on the dropping mercury electrode was suggested in solutions containing thiocyanate ions.     

Selective solid-phase extraction of trace cadmium(II) with an ionic imprinted polymer prepared from a dual-ligand monomer

A novel dual-ligand reagent (2Z)-N,N′-bis(2-aminoethylic)but-2-enediamide, was synthesized and applied to prepare metal ion-imprinted polymers (IIPs) materials by ionic imprinted technique for selective solid-phase extraction (SPE) of trace Cd(II) from aqueous solution. In the first step, Cd(II) formed coordination linkage with the two ethylenediamine groups of the synthetic monomer. Then the complex was copolymerized with pentaerythritol triacrylate (crosslinker) in the presence of 2,2′-azobisisobutyronitrile as initiator. Subsequently, the imprinted Cd(II) was completely removed by leaching the dried and powdered materials particles with 0.5 M HCl. The obtained IIPs particles exhibited excellent selectivity for target ion. The distribution ratio (D) values of Cd(II)-IIPs for Cd(II) were greatly larger than that for Cu(II), Zn(II) and Hg(II). The relative selective factor (α_r) values of Cd(II)/Cu(II), Cd(II)/Zn(II) and Cd(II)/Hg(II) were 25.5, 35.3 and 62.1. The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Cd(II) was 32.56 and 6.30 mg g⁻¹, respectively. Moreover, the times of adsorption equilibration and complete desorption were remarkably short. The prepared Cd(II)-IIPs were shown to be promising for solid-phase extraction coupled with inductively coupled plasma atomic emission spectrometry (ICP-AES) for the determination of trace Cd(II) in real samples. The precision (R.S.D.) and detection limit (3σ) of the method were 2.4% and 0.14 μg L⁻¹, respectively. The column packed with Cd(II)-IIPs was good enough for Cd(II) separation in matrixes containing components with similar chemical behaviour such as Cu(II), Zn(II) and Hg(II).     

Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns

A novel chelating resin (poly-Cd(II)-DAAB-VP) was prepared by metal ion imprinted polymer (MIIP) technique. The resin was obtained by one pot reaction of Cd(II)-diazoaminobenzene-vinylpyridine with cross-linker ethyleneglycoldimethacrylate (EGDMA). Comparing with non-imprinted resin, the poly-Cd(II)-DAAB-VP has higher adsorption capacity and selectivity for Cd(II). The distribution ratio (D) values for the Cd(II)-imprinted resin show increase for Cd(II) with respect to both D values of Zn(II), Cu(II), Hg(II) and non-imprinted resin. The relatively selective factor (α_r) values of Cd(II)/Cu(II), Cd(II)/Zn(II) and Cd(II)/Hg(II), are 51.2, 45.6, and 85.4, which are greater than 1. poly-Cd(II)-DAAB-VP can be used at least 20 times without considerable loss of adsorption capacity. Based on poly-Cd(II)-DAAB-VP packed columns, a highly selective solid-phase extraction (SPE) and preconcentration method for Cd(II) from aqueous solution was developed. The MIIP-SPE preconcentration procedure showed a linear calibration curve within concentration range from 0.093 to 30 μg l⁻¹. The detection limit and quantification limit were 0.093 and 0.21 μg l⁻¹ (3σ) for flame atomic absorption spectrometry (FAAS). The relative standard deviation of the eleven replicate determinations was 3.7% for the determination of 10 μg of Cd(II) in 100 ml water sample. Determination of Cd(II) in certified river sediment sample (GBW 08301) demonstrated that the interfering matrix had been almost removed during preconcentration. The column was good enough for Cd(II) determination in matrixes containing components with similar chemical property such as Cu(II), Zn(II) and Hg(II).     

Voltammetry of copper species in estuarine waters induced adsorption of copper on the hanging mercury drop electrode in complexing ligand/surfactant/chloride media

The adsorption of copper species on a positively charged hanging mercury drop electrode in complexing ligand/surfactant/chloride solution is discussed. Techniques used were differential pulse voltammetry of the copper in the adsorbed film, and potential-step reduction of adsorbed copper followed by different pulse anodic stripping voltammetry of Cu(Hg). The CuCl^?₂ species is shown to be the most important copper moiety adsorbed on the electrode and the adsorption is enhanced by organic films. This can be a critical pathway in the reduction of copper(II) in estuarine waters. The induced adsorption of copper in organic layers has biogeochemical implications associated with the nature of organic films and their influence on the Cu(II)/Cu(I) redox couple. There are also analytical applications, e.g., the compositional assay of organic monolayers by utilising Cu(II) and Cu(I) adsorption as electoractive probes and the determination of solution copper-organic binding.     

On Cu(Hg)/Cu(II) equilibria and reactions in aqueous sulphate solution

Combined thermodynamic and kinetic studies have revealed amalgam properties, solution activities, and diffusion data besides charge-transfer parameters and exchange rates for either step of the Cu(Hg)/Cu(II) electrode in aqueous solutions of xM CuSO₄+(0.5?x) M MgSO₄+H₂SO₄ (to pH about 2.5) at 25°C. The studies allow separation of mean ionic activities into convenient single-ion ones. The kinetic results demonstrate the consecutive two-step mechanism involved. Comparison is made to the solid Cu/Cu(II) electrode, and double-layer effects are discussed.     

Single-ion activities and Zn/Zn(II) reactions in alkali chloride solutions

The title subject has been studied through equilibrium potential measurements on the Zn/Zn(II) and the Ag/AgCl electrode vs. SCE and galvanostatic single-step and chronopotentiometric polarization measurements on the former electrode, all in acidified (to pH about 3) solutions of 0.005 M ZnCl₂+0.99 M MeCl (for Me=Li, Na, K, and Cs) at 25°C. It is found that the Zn(II) activity decreases together with the alkali-ion activity along the sequence LiCl>NaCl>KCl>CsCl, that the chloride-ion activity essentially is insensitive to mutual substitutions of alkali ions, and that the Zn/Zn(II) reactions exhibit no other than pure activity effects of such substitutions. The results support that the Zn/Zn(II) electrode reacts in two consecutive steps with Zn(I) as intermediate, and that some sluggishness appears in chemical reactions to and from electroactive Zn(II) species.     

Kinetics and mechanism of the Cu(I)/Cu(Hg) electrode reactions in DMSO solutions of halide ions

The electrode reaction Cu(I)/Cu(Hg) in complex chloride, bromide and iodide solutions with DMSO as solvent has been studied at the equilibrium potential by the faradiac impedance method and a cyclic current-step method. The kinetic data refer to the ionic strength 1 M with ammonium perchlorate as supporting electrolyte and to the temperature 25°C. Double-layer data have been obtained from electrocapillary measurements. From the results for the chloride system at [Cl^?]>15 mM it is concluded that the charge transfer is catalysed by ligand bridging at the amalgam and the following parallel reactions predominate: Cl_ads^?-Cu⁺+e^?(am)Cl_ads^?+Cu(am) Cl_ads^?-Cu₂Cl_j^2?j+e^?(am)Cl_ads^?+Cu(am)+CuCl_j^1?j At lower [Cl^?] and in the whole ligand concentration range available in the bromide and iodide systems the impedance measurements indicate a rate-controlling adsorption step. It is suggested that uncharged complex CuL (L^?=halide ion) then forms an adsorbed two-dimensional network on the amalgam surface.     

Synthesis of Zn(II) ion-imprinted solid-phase extraction material and its analytical application

Zn(II) ion-imprinted polymer materials used for solid-phase extraction (SPE) column were prepared by the copolymerization of 8-acryloyloxyquinoline (8-AOQ) monomer and a crosslinker ethylene glycol dimethacrylate (EGDMA) in the presence of 2,2′-azobisisobutyronitrile (AIBN) as an initiator. After removing Zn(II) ion from the polymer, molecularly imprinted polymers (MIPs) capable of selectively rebinding Zn(II) ion were obtained. The maximum adsorption capacity of Zn(II) on MIPs beads was about 3.9 mg g⁻¹. The effect of pH and flow rate for quantitative enrichment was also investigated. The Zn(II)-imprinted microbeads have a greater affinity for Zn(II) with respect to Cu(II), Co(II) and Ni(II) ions. A detection limit of 0.65 μg L⁻¹(3σ) and a relative standard deviation (R.S.D., n = 7) of 2.9% were obtained. The MIPs-SPE preconcentration procedure showed a linear calibration curve within concentration range from 0.65 to 130 μg L⁻¹. Zn(II) ion-imprinted beads enabled the selective extraction of zinc ions from a complex matrix, and after 20 times of adsorption and desorption cycle, the recovery of adsorption capacity of Zn(II) on MIPs beads was only decreased 3.2%. The results suggested that these MIPs can be used several times without considerable loss of adsorption capacity.     

Synthesis and spectroscopic,magnetic and cyclic voltammetric characterization of some metal complexes of methionine: [(C5H10NO2S)2MII]; MII = Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II)

Some metal complexes of DL–methionine were prepared in aqueous medium and characterized by different physico-chemical methods. Methionine forms 1:2 complexes with metal, M(II). The general empirical formula of the complexes is proposed as [(C₅H₁₀NO₂S)₂M^II]; where M^II = Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II). All the complexes are extremely stable in light and air and optically inactive. Magnetic susceptibility data of the complexes demonstrate that they are high spin paramagnetic complex except Zn(II), Cd(II) and Hg(II) complexes. The bonding pattern in the complexes are similar to each other as indicated by electronic absorption spectra and FTIR spectral analysis. The current potential data, peak separation (AE) and the peak current ratio (i_pa/i_pc) of the (Mn, Cu and Cd) complexes indicate that the charge transfer processes are irreversible, the systems are diffusion controlled and also adsorptive controlled. The charge transfer rate constant of metals in their complexes are less than those in their metal salts at identical experimental conditions due to the coordination of metal with methionine.     

Ion activities and copper electrode reactions in magnesium sulphate solutions

Thermodynamic and kinetic studies have revealed conventional mean-ion and convenient single-ion activity coefficients for copper(II), magnesium and sulphate ions and standard exchange rates for either step of the liquid Cu(Hg)/Cu(II) electrode and of the solid Cu/Cu(II) electrode, all in 0.005 mol kg^?1 CuSO₄+0.005 mol kg^?1 H₂SO₄+(x?0.01) mol kg^?1MgSO₄ (for x=0.2 to 3) at 25°C. With increasing x, the sulphate activity coefficient steadily falls, the copper(II) and magnesium activity coefficients go through a minimum near x=1, and the standard rates fall. The kinetic changes with x reveal some information on double-layer and ligand effects.     

The accelerating influence of thiourea on the electroreduction of Zn(II) at a mercury electrode in water/methanol mixtures

Summary The influence of thiourea on the Zn(II)/Zn(Hg) electrode process was studied in water/methanol mixtures under addition of NaClO₄. Diffusion coefficients, formal potentials, and charge transfer rate constants have been determined. It is postulated that the composition of the active complex formed on the electrode plays the dominant role in the acceleration of the electrode processes.

---

Der beschleunigende Einfluß von Thioharnstoff auf die Elektroreduktion von Zn(II) an einer Quecksilberelektrode in Wasser-Methanol-Gemischen

Zusammenfassung Der Einfluß von Thioharnstoff auf den Elektrodenprozeß Zn(II)/Zn(Hg) wurde in Wasser-Methanol-Mischungen unter Zusatz von NaClO₄ untersucht. Diffusionskoeffizienten, Potentiale und Geschwindigkeitskonstanten der Ladungsübertragung wurden bestimmt. Es wird angenommen, daß bei der Beschleunigung der Elektrodenprozesse die Zusammensetzung des an der Elektrode gebildeten aktiven Komplexes eine entscheidende Rolle spielt.

     

Strongly Basic Anion Exchange Resin Based on a Cross-Linked Polyacrylate for Simultaneous C.I. Acid Green 16, Zn(II), Cu(II), Ni(II) and Phenol Removal

The adsorption ability of Lewatit S5528 (S5528) resin for C.I. Acid Green 16 (AG16), heavy metals (Zn(II), Cu(II) and Ni(II)) and phenol removal from single-component aqueous solutions is presented in this study to assess its suitability for wastewater treatment. Kinetic and equilibrium studies were carried out in order to determine adsorption capacities, taking into account phase contact time, adsorbates’ initial concentration, and auxiliary presence (NaCl, Na₂SO₄, anionic (SDS) and non-ionic (Triton X100) surfactants). The pseudo-second-order kinetic model described experimental data better than pseudo-first-order or intraparticle diffusion models. The adsorption of AG16 (538 mg/g), phenol (14.5 mg/g) and Cu(II) (5.8 mg/g) followed the Langmuir isotherm equation, while the uptake of Zn(II) (0.179 mg^1−1/nL^1/n/g) and Ni(II) (0.048 mg^1−1/nL^1/n/g) was better described by the Freundlich model. The auxiliary’s presence significantly reduced AG16 removal efficiency, whereas in the case of heavy metals the changes were negligible. The column studies proved the good adsorption ability of Lewatit S5528 towards AG16 and Zn(II). The desorption was the most effective for AG16 (>90% of dye was eluted using 1 mol/L HCl + 50% v/v MeOH and 1 mol/L NaCl + 50% v/v MeOH solutions).     

Determination of trace Pb(Ⅱ), Cd(Ⅱ) and Zn(Ⅱ) using differential pulse stripping voltammetry without Hg modification

In this work,we reported a simultaneous determination approach for Pb(II),Cd(II)and Zn(II)atμg L 1concentration levels using differential pulse stripping voltammetry on a bismuth film electrode(BiFE).The BiFE could be prepared in situ when the sample solution contained a suitable amount of Bi(NO)3,and its analytical performance was evaluated for the simultaneous determination of Pb(II),Cd(II)and Zn(II)in solutions.The determination limits were found to be 0.19μg L 1for Zn(II),and0.28μg L 1for Pb(II)and Cd(II),with a preconcentration time of 300 s.The BiFE approach was successfully applied to determine Pb(II),Cd(II)and Zn(II)in tea leaf and infusion samples,and the results were in agreement with those obtained using an atomic absorption spectrometry approach.Without Hg usage,the in situ preparation for BiFE supplied a green and acceptability sensitive method for the determination of the heavy metal ions.