Selective separation and extraction of copper(II), iron(II,III), and Cerium(III,IV) ions from aqueous solutions by electroflotation method

Possibility of the electroflotation separation and extraction of cerium(II, IV), copper(II), and iron(II, III) from aqueous solutions is demonstrated. The optimal pH value and the concentration ratio of ions of the metals being separated, at which their electroflotation separation and extraction from aqueous solutions is the most efficient, was determined. It was shown that the electroflotation method is promising for selective separation and extraction of metal ions with various hydrate-formation pH values from aqueous solutions.     

The application of 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane to the extraction of metal ions

The use of 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (Tet) in chloroform solutions provides quantitative extraction of lead(II), cadmium(II), copper(II) and zinc(II) at different pH values from solutions containing perchlorate and cyclohexanecarboxylic acid. Nickel(II) and cobalt(II) ions are not extracted quantitatively. Single extractions of mixtures of copper with transition metals gave the best separations for the copper/nickel system. Separations of copper from cobalt, lead, manganese and iron were less satisfactory.     

Structure,insertion electrochemistry,and magnetic properties of a new type of substitutional solid solutions of copper,nickel, and iron hexacyanoferrates/hexacyanocobaltates

Substitutional solid solutions of metal hexacyanometalates in which low-spin iron(III) and cobalt(III) ions populate the carbon-coordinated sites were synthesized and studied by powder diffraction including Rietveld refinement, cyclic voltammetry of immobilized microparticles, diffuse reflection vis-spectrometry, and magnetization techniques. The continuous solid solution series of potassium copper(II), potassium nickel(II), and iron(III) [(hexacyanoferrate(III))(1-x)(hexacyanocobaltate(III))(x)] show that the substitution of low-spin iron(III) by cobalt(III) in the hexacyanometalate units more strongly affects the formal potentials of the nitrogen-coordinated copper(II) and high-spin iron(III) ions than those of the remaining low-spin iron(III) ions. In the case of copper(II) and iron(III) [(hexacyanoferrate(III))(1-x)(hexacyanocobaltate(III))(x)] the peak currents decrease much more than can be explained by stoichiometry, indicating that the charge propagation is slowed by the substitution of low-spin iron(III) by cobalt(III). The Rietveld refinement of all compounds confirmed the structure initially proposed by Keggin for Prussian blue and contradicts the structure described later by Ludi. The dependencies of lattice parameters on composition exhibit in all series of solid solutions studied similar, although small, deviations from ideality, which correlate with the electrochemical behavior. Finally, a series of solid solutions of the composition KNi(0.5)(II)Cu(0.5)(II)[Fe(III)(CN)(6)](1-x)[Co(III)(CN)(6)](x), where both the nitrogen- and carbon-coordinated metal ions are mixed populated and were synthesized and characterized. These are the first examples of solid solutions of metal hexacyanometalates with four different metal ions, where both the nitrogen- and the carbon-coordinated sites possess a mixed population.     

Selective extraction of iron(III) from aqueous nitrate solution in the presence of cobalt(II), copper(II) and nickel(II) ions using bis(delta2-2-imidazolinyl)-5,5'-dioxime.

The feasibility of using bis(delta2-2-imidazolinyl)-5,5'-dioxime (H2L) for the selective extraction of iron(III) from aqueous solutions was investigated by employing an solvent-extraction technique. The extraction of iron(III) from an aqueous nitrate solution in the presence of metal ions, such as cobalt(II), copper(II) and nickel(II), was carried out using H2L in binary and multicomponent mixtures. Iron(III) extraction has been studied as a function of the pH, equilibrium time and extractant concentration. From the extracted complex species in the organic phase, iron(III) was stripped with 2 M HNO3, and later determined using atomic-absorption spectrometry. The extraction was found to significantly depend on the aqueous solution pH. The extraction of iron(III) with H2L increases with the pH value, reaching a maximum in the zone of pH 2.0, remaining constant between 2 and 3.5 and subsequently decreasing. The quantitative extraction of iron(III) with 5 x 10(-30 M H2L in toluene is observed at pH 2.0. H2L was found to react with iron(III) to form ligand complex having a composition of 1:2 (Fe:H2L).     

Preparation and properties of a new chelating resin containing 1-nitroso-2-naphthol as the functional group

A macroreticular polystyrene-based chelating ion-exchanger containing 1-nitroso-2-naphthol as the functional group has been synthesized. The exchange-capacity of the resin for a number of metal ions such as copper(II), iron(III), cobalt(II), nickel(II), palladium(II) and uranium(VI) as a function of pH has been determined. The sorption and elution characteristics for palladium(II) and uranium(VI) have been thoroughly examined with a view to utilizing the resin for separation and concentration of uranium and palladium. Uranium(VI) has been separated from a mixture of ten other metal ions by sorption on the chelating resin and selective elution with 0.5M sodium carbonate. Palladium(II) has been separated from various metal ions by selective sorption on the resin in 1M hydrochloric acid medium.     

Extraction of Copper from Sulfate Solutions with Hydrazides of Versatic Higher Acids in the Presence of Accompanying Metals

Fundamental aspects of the extractive recovery of copper(II) in the presence of accompanying metals from sulfuric acid solutions with hydrazides of Versatic (GVIK 509) α-branched tertiary carboxylic acids in kerosene or its mixture with modifying agents: 2-ethylhexanol or alkylphenol. The selective extraction of copper(II) in the presence of nickel(II), cobalt(II), zinc(II), and iron(III) with hydrazides in kerosene is possible at pH 0.1–0.6. The separation coefficients of element pairs were calculated. It was found that the modifiers have no effect on the quantitative extraction of copper(II), but strongly change the extraction pattern of the metals under study. It was shown that the re-extraction of copper(II) with sulfuric acid solutions is in principle possible.     

The application of tiron in photometric titrations

Tiron is a suitable titrant for the direct, selective photometric titration of bismuth(III), iron(III) and thorium(IV) in acidic solutions. Metal ions such as lead(II), nickeI(II) and copper(II) do not interfere; this is in contrast with titrations in which EDTA or a similar chelating agent is used as the titrant.     

Analytical applications of a liquid anion-exchanger for the separation of uranium(IV) in malonate solution

Uranium was quantitatively extracted with 4% Amberlite LA-1 in xylene at pH 2.5-4.0 from 0.001 M malonic acid. It was stripped from the organic phase with 0.01 M sodium hydroxide and determined spectrophotometrically at 530 nm as its complex with 4-(2-pyridylazo) resorcinol. Of various liquid anion-exchangers tested, Amberlite LA-1 was found to be best. Uranium was separated from alkali and alkaline earth metal ions, thallium(I), iron(II), silver, arsenic(III) and tin(IV) by selective extraction, and from zinc, cadmium, nickel, copper(II), cobalt(II), chromium(III), aluminium, iron(III), lead, bismuth, antimony(III) and yttrium by selective stripping. The separation from scandium, zirconium, thorium and vanadium(V) was done by exploiting differences in the stability of chloro-complexes.     

Extractive separation of Cu<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> and Ni<Superscript>2+</Superscript>–Co<Superscript>2+</Superscript> mixtures using <Emphasis Type="Italic">N</Emphasis>-salicylideneaniline

A study on the extraction of copper(II), cobalt(II), and nickel(II) from solutions containing ions of both metals with N-salicylideneaniline(SAN) in chloroform has been realized. Distribution of the metal ions in wide range of pH has been studied. Extraction of copper(II) was always favored over that of cobalt(II). Extraction of copper(II) from binary metal solution is selective and it can be quantitatively separated from cobalt(II). The equilibrium constant of the extraction of cobalt and nickel from an aqueous solution containing both metals using SAN were evaluated. The separation factors for cobalt and nickel were expressed as a function of the distribution of nickel and cobalt. From these results, salicylideneaniline is an adequate extractant for extractive separation of such mixtures.     

Electrochemical approach to monitoring metal exchange reaction of acetylacetonate complexes with cadmium, copper and zinc ions

Metal exchange reactions of acetylacetonate complexes with Cd(II), Cu(II) and Zn(II) ions were investigated by using cadmium and copper ion selective electrodes. Changes in the electrode potential and pH of the solutions were monitored upon adding the pertinent metal Zn(II) of the acetylacetonate (AA) complexes. In the reverse system in which a stable Cu-AA complex exists in the solution prior to adding a secondary metal ion (Cd(II) or Zn(II)), no Cu(II) was replaced by either ion. In the systems containing Cd(II) and Zn(II) as a complexed form with AA or as free ions, the exchange reactions were not explained by considering the equilibrium stability constants of the Cd-AA and Zn-AA complexes.     

Synthesis and properties of a chelating resin containing triazolethiol groups

A macroreticular poly(acrylic acid)-based resin with triazolethiol as the functional group has been synthesized. The stability of the resin in acidic media and the behaviour in sorption and desorption of various metal ions have been investigated and compared with those of the acylthiosemicarbazide resin which is an intermediate in synthesis of the triazolethiol resin. Both resins show high affinity for copper(II) silver, cadmium and mercury(II), and high selectivity for silver and mercury(II) at low pH (1–2), and even at pH 7 if EDTA is present. The triazolethiol resin sorbs metal ions faster than the acylthiosemicarbazide resin does and sorbs mercury(II) from high concentrations of acids and neutral salt solutions. This resin has been applied to the concentration of silver and mercury(II) from sea-water samples by column operation.     

Comparison of carrier elements for coprecipitation and graphite-furnace atomic absorption spectrometry

The group IIIB elements (aluminum, gallium and indium) and iron(III) were studied from the standpoint of the advantageous combination of coprecipitation and graphite-furnace atomic absorption Spectrometry (GFAAS). Milligram quantities of four hydroxides were precipitated at different pH's from solutions containing traces of copper(II) and cadmium(II) ions, in order to examine the effect of pH on the coprecipitation. Almost similar results were obtained for gallium, indium and iron hydroxides, with which the copper and cadmium were coprecipitated nearly completely at pH>7. In case of aluminum hydroxide, the optimal pH range was narrow because of the redissolution of the precipitate in alkaline solutions. The removal of indium carrier was successfully achieved by volatilization as bromide at the pyrolysis stage in GFAAS, otherwise serious background absorption interfered with the trace determination. Volatilization loss of cadmium was eliminated by adding a small amount of miourea. Gallium carrier was mostly removed as chloride, but large background absorption still occurred in the determination of cadmium.     

Spectrophotometric estimation of cobalt(II) with nitrilotriacetic acid

A convenient and efficient method for the estimation of cobalt(II) ions in the presence of other metal ions is described. Interference of metal ions such as iron(II), iron(III), nickel(II), manganese(II), and copper(II) have been investigated. Only iron(III) ions seriously affect this determination. Copper(II) and nickel(II) ions do not interfere if present in a molar-ratio less than 1:2 in the cobalt(II) ion solution. Cobalt(II)-nickel(II) and cobalt(II)-copper(II) binary mixtures can be efficiently analyzed at selective wavelengths.     

Extraction of some metal phenylacetates into chloroform

Phenylacetic acid has been found to be very useful as a reagent in the extraction of large quantities of certain ions, notable iron(III), cobalt(II), copper(II), lead, zinc, cadmium and uranyl. A 1M solution of the reagent in chloroform is used to extract up to 200 mg of certain ions from small volumes of aqueous phase. Selectivity is increased by pH control and masking.     

Sequential potentiometric complexometric redox determination of iron(III) and cobalt(II) with application to alloys

A simple potentiometric method is presented for successive determination of iron(III) and cobalt(II) by complexometric titration of the iron(III) with EDTA at pH 2 and 40 degrees , followed by redox titration of the cobalt(II) complex with 1,10-phenanthroline or 2,2'-bipyridyl at pH 4-5 and 40 degrees , with gold(III). There is no interference in either determination from common metal ions other than copper(II), which severely affects the cobalt determination but can be removed by electrolysis. The method has been successfully applied to determination of iron and cobalt in Kovar and Alnico magnet alloys.     

Coprecipitation with yttrium phosphate as a separation technique for iron(III), lead, and bismuth from cobalt, nickel, and copper matrices

The coprecipitation behavior of 44 elements (47 ions because of chromium(III,VI), arsenic(III,V), and antimony(III,V)) with yttrium phosphate was investigated at various pHs. Yttrium phosphate could quantitatively coprecipitate iron(III), lead, bismuth, and indium over a wide pH range; however, 18 ions, including alkali metals and oxo anions, such as vanadium(V), chromium(VI), molybdenum(VI), tungsten(VI), germanium(IV), arsenic(III,V), selenium(IV), and tellurium(VI), were scarcely collected. In addition, 19 ions, including cobalt, nickel, and copper(II), were hardly coprecipitated at pHs below about 3. Based on these results, the separation of iron(III), lead, and bismuth from cobalt, nickel, and copper(II) matrices was investigated. Iron(III), lead, and bismuth ranging from 0.5 to 25 μg could be separated effectively from a solution containing 0.5 g of cobalt, nickel, or copper at pH 3.0. The separated iron(III), lead, and bismuth could be determined by inductively coupled plasma atomic emission spectrometry using internal standardization. The detection limits (3σ, n = 7) of iron(III), lead, and bismuth were 0.008, 0.137, and 0.073 μg, respectively. The proposed method was applied to the analyses of metals and chlorides of cobalt, nickel, and copper.     

Cloud point extraction of copper, lead, cadmium, and iron using 2,6-diamino-4-phenyl-1,3,5-triazine and nonionic surfactant, and their flame atomic absorption spectrometric determination in water and canned food samples

A cloud point extraction procedure was optimized for the separation and preconcentration of lead(II), cadmium(II), copper(II), and iron(III) ions in various water and canned food samples. The metal ions formed complexes with 2,6-diamino-4-phenyl-1,3,5-triazine that were extracted by surfactant-rich phases in the nonionic surfactant Triton X-114. The surfactant-rich phase was diluted with 1 M HNO3 in methanol prior to its analysis by flame atomic absorption spectrometry. The parameters affecting the extraction efficiency of the proposed method, such as sample pH, complexing agent concentration, surfactant concentration, temperature, and incubation time, were optimized. LOD values based on three times the SD of the blank (3Sb) were 0.38, 0.48, 1.33, and 1.85 microg/L for cadmium(II), copper(II), lead(II), and iron(III) ions, respectively. The precision (RSD) of the method was in the 1.86-3.06% range (n=7). Validation of the procedure was carried out by analysis of National Institute of Standards and Technology Standard Reference Material (NIST-SRM) 1568a Rice Flour and GBW 07605 Tea. The method was applied to water and canned food samples for determination of metal ions.     

The Influence of Macrocyclic Tetraamine Immobilization in Langmuir Monolayers on Complex Formation Selectivity

Selective complex formation in Langmuir dicetyl cyclene monolayers on the surface of aqueous solutions of Cu(II), Ni(II), and Zn(II) salts and their mixtures was studied. The effect of selectivity “inversion” of diphilic cyclene immobilized in monolayers on the surface of solutions of a mixture of copper(II) and nickel(II) salts was observed; the inversion was induced by a change in subphase pH. An analysis of the isotherms of monolayer compression and X-ray fluorescence spectra of the corresponding Langmuir-Blodgett films showed that subphase acidification caused a gradual transition from the selective formation of copper-containing macrocyclic complexes to selective complex formation between the ligand and nickel ions. The effect observed was not characteristic of complex formation with similar unsubstituted tetraamines in bulk solution. The phenomenon was interpreted from the point of view of specific conformational transitions of the diphilic macroring in the two-dimensional system organized at the interphase boundary.     

Preconcentration of copper,lead, cadmium and zinc ions from water with 2-mercaptobenzothiazole loaded on glass beads with the aid of collodion

2-Mercaptobenzothiazole (MBT) loaded on glass beads with the aid of collodion was prepared and used for selective preconcentration of μg l^?1 levels of copper(II) and lead from aqueous solutions. Copper and lead were quantitatively retained on the loaded beads from solutions of pH 5.0–6.0 and >5.0, respectively, while cadmium(II) and zinc(II) were retained at ? pH 6.0 and 7.0, respectively. The retention capacity of the loaded beads was ca. 108 μg Cu g^?1 (1.7 μmol g^?1) at pH 5.5 for beads of 0.3–0.4 mm diameter. The mole ratios of MBT to copper(II) and lead(II) were ca. 10 and 45, respectively, regardless of the amount of MBT loaded on the beads. Copper was completely retained on the column at a high flow rate (21.7 ml min^? cm^?2) and lead(II) at up to 12.7 ml min^? cm^?2. Cadmium(II) and zinc(II) were not retained quantitatively even at low flow rates (< 1.2 ml min^?1 cm^?2). Thus, selective preconcentration of copper and lead was achieved by passing the sample through the column at high flow rate at pH 6.5. The copper and lead retained on the column were complete eluted together with the collodion with 5 ml of MIBK by batch-mode elution, and determined directly by one-drop atomic absorption spectrometry. Copper(II) and lead(II) in several kinds of water were determined.     

Recovery of heavy metal ions from aqueous solutions using modified organosilicas

Sorption of Cu(II), Pb(II), Cd(II), and Zn(II) from aqueous solutions on two-component organosilicas was studied as influenced by sorbent composition, contact time, ratio of solid and liquid phases, solution pH, nature and concentration of heavy metal ions, and content of modifying agent. The degrees of sorption of these metal ions from aqueous solutions using organosilicas modified with aluminum(III) added into the siloxane matrix or with copper(II) grafted to the sorbent surface layer were compared.