Switchable single-longitudinal-mode dual-wavelength erbium-doped fiber ring laser based on one polarization-maintaining fiber Bragg grating incorporating saturable absorber and feedback fiber loop

Switchable single-longitudinal-mode (SLM) dual-wavelength erbium-doped fiber ring laser based on one polarization-maintaining fiber Bragg grating (PMFBG) is demonstrated. Due to the enhancement of the polarization hole burning (PHB) by the PMFBG, the laser can be designed to operate in stable dual-wavelength or wavelength-switching modes with a wavelength spacing of 0.336 nm at room temperature by adjusting a polarization controller (PC). The stable SLM operation is guaranteed by a compound-ring cavity and a saturable absorber (SA). The optical signal-to-noise ratio (OSNR) is over 45 dB. The amplitude variation in nearly one and half an hour is less than 0.2 dB.     

Stable dual-wavelength single-longitudinal-mode ring erbium-doped fiber laser for optical generation of microwave frequency

We demonstrate a simple dual-wavelength ring erbium-doped fiber laser operating in single-longitudinal-mode (SLM) at room temperature. A pair of reflection type short-period fiber Bragg gratings (FBGs), which have two different center wavelengths of 1545.072 and 1545.284 nm, are used as the wavelength-selective component of the laser. A segment of unpumped polarization maintaining erbium-doped fiber (PM-EDF) is acted as a narrow multiband filter. By turning the polarization controller (PC) to enhance the polarization hole burning (PHB), the single-wavelength and dual-wavelength laser oscillations are observed at 1545.072 and 1545.284 nm. The output power variation is less than 0.6 dB for both wavelengths over a five-minute period and the optical signal to noise ratio (OSNR) is greater than 50 dB. By beating the dual-wavelengths at a photodetector (PD), a microwave signal at 26.44 GHz is demonstrated.     

Multiwavelength fiber laser using S-band erbium-doped fiber amplifier and semiconductor optical amplifier

A multiwavelength fiber ring laser that is based on an S-band erbium-doped fiber amplifier (EDFA) and a semiconductor optical amplifier (SOA) is developed. An optical switch is used to switch the multiwavelength fiber laser between S-band and L-band. This fiber laser can stably lase seven wavelengths in the S-band or 28 wavelengths in the L-band. Additionally, the lasing wavelengths with a signal-to-noise ratio of over 33 dB and a wavelength spacing of 100 GHz are demonstrated experimentally. The average powers of the lasing wavelength in the S-band and the L-band are −7.53 and −12.15 dBm, respectively.     

Switchable and tunable dual-wavelength ultrashort pulse generation in a passively mode-locked erbium-doped fiber ring laser

A simple switchable and tunable dual-wavelength passively mode-locked erbium-doped fiber ring laser based on nonlinear polarization rotation (NPR) effect is proposed and experimentally demonstrated. The NPR effect effectively induces wavelength- and intensity-dependent loss to readily implement stable dual-wavelength passively mode-locked operation. The wavelength switching and tuning of the dual-wavelength ultrashort pulse laser are achieved only by appropriately rotating the polarization controllers. The side-mode suppression ratio of the output pulse is larger than 41 dB over a wavelength-tuning range of 43.4 nm. Moreover, triple-wavelength ultrashort pulse can also be observed.     

Switchable dual-wavelength polarization-maintaining erbium-doped fiber laser using an optical circulator as the all-reflecting mirror

A simple and effective switchable dual-wavelength polarization-maintaining erbium-doped fiber laser is proposed and demonstrated. Only using a uniform fiber Bragg grating written directly in a segment of the photosensitive and polarization-maintaining erbium-doped fiber as the wavelength selector and an optical circulator as the all-reflecting mirror, a stable simultaneous dual-wavelength oscillation is achieved with a wavelength spacing of 0.364 nm experimentally by exploiting the polarization hole burning effect at room temperature. The output can be switched between single- and dual-wavelength by adjusting the polarization controller. The 3-dB bandwidth and the side mode suppression ratio of the laser’s outputs are measured to be less than 0.01 nm and more than 50 dB. The power fluctuation and wavelength drift are measured to be less than 0.50 dB and 0.020 nm over an hour.     

Switchable erbium-doped fiber ring laser based on Sagnac loop mirror incorporating few-mode high birefringence fiber

Without the need of any other additional filtering device, a triple-wavelength switchable erbium-doped fiber ring laser based on Sagnac loop mirror incorporating a piece of few-mode high birefringence fiber is newly proposed and experimentally demonstrated. Three potential lasing wavelengths at about 2.0 nm interval with the side mode suppression ratio higher than 40 dB can be switched mainly by adjusting a polarization controller next to the few-mode high birefringence fiber in the Sagnac loop. In addition to the stable single-line lasing operation, simultaneous dual- and triple-line oscillations are also highly stable at room temperature with suppressing the intrinsic homogeneous gain broadening of the erbium-doped fiber.     

Multiwavelength fiber ring laser using a gain clamped semiconductor optical amplifier

We demonstrate a novel multi-wavelength fiber ring laser based on a gain clamped semiconductor optical amplifier. The number of lasing lines can be tuned by adjusting the loss inside the cavity. The wavelength interval between the wavelengths is 100 GHz. The proposed laser shows a stable operation with total intensity fluctuation for a single laser line within ±0.02 dB at room temperature for a period of 30-minutes.     

Switchable dual-wavelength Erbium-doped fiber ring laser with cascaded fiber Bragg gratings

We have experimentally shown wavelength mode switching in a dual-wavelength Erbium-doped single cavity fiber laser where the initial two wavelengths of 1 nm spacing are determined by the cascaded reflection type short-period fiber Bragg gratings having two different centre wavelengths of 1550.5 and 1551.5 nm. The lasing mode depends on the polarization in the ring cavity to migrate from one wavelength to another or operates in both modes in a polarization beam splitter output. To effectively control the polarization in the ring cavity, the polarization controllers were positioned before and after the polarization beam splitter. This method of wavelength switching provides a simple way of mode tuning in dual-wavelength fiber lasers.     

Numerical study of a harmonic mode-locked semiconductor optical amplifier fiber ring laser

An improved harmonic mode-locked Semiconductor optical amplifier (SOA) fiber ring lasers has been presented and numerically investigated based on the self-reproduction theory. The numerical result shows that a narrower optical pulse train with a more symmetrical-temporal shape can be obtained, when the modulation SOA is DC biased on high current, whereas the gain SOA is DC biased on the low current functions as a gain compensator in the experimental setup. Also, the system parameters effects on the characteristic of the harmonic mode-locked pulse have been investigated.     

Wavelength spacing tunable dual-wavelength single-longitudinal-mode fiber ring laser based on fiber Bragg gratings

A wavelength spacing tunable dual-wavelength single-longitudinal-mode fiber ring laser is presented by employing separated fiber Bragg gratings. By using a saturable-absorption-induced grating filter and a hybrid gain medium formed by a semiconductor optical amplifier and an erbium-doped fiber amplifier, stable single-longitudinal-mode lasing is achieved at room temperature. Wavelength spacing of the proposed fiber laser can be tuned in a range from 0.1 to 1.3 nm.     

Continuous-wave supercontinuum laser based on an erbium-doped fiber ring cavity incorporating a highly nonlinear optical fiber

We experimentally demonstrate a novel erbium-doped fiber based continuous-wave (cw) supercontinuum laser. The laser has a simple ring-cavity structure incorporating an erbium-doped fiber and a highly nonlinear dispersion-shifted fiber (HNL-DSF). Differently from previously demonstrated cw supercontinuum sources based on single propagation of a strong Raman pump laser beam through a highly nonlinear fiber, erbium gain inside the cavity generates a seed light oscillation, and the oscillated light subsequently evolves into a supercontinuum by nonlinear effects such as modulation instability and stimulated Raman scattering in the HNL-DSF. High quality of the depolarized supercontinuum laser output with a spectral bandwidth larger than 250 nm is readily achieved.     

Wavelength-tunable optical pulse generation from a fiber ring laser with a reflective semiconductor optical amplifier

This work describes, for the first time, wavelength-tunable optical pulse generation from a fiber ring laser with a reflective semiconductor optical amplifier. The optical signal to noise ratio of this fiber laser is higher than 49 dB over the wavelength-tunable range of 16 nm. Performance of this fiber ring laser operated at different wavelengths is also discussed.     

Broadly tunable dual-wavelength erbium-doped ring fiber laser based on a high-birefringence fiber loop mirror

A broadly tunable dual-wavelength erbium-doped ring fiber laser based on a high-birefringence fiber loop mirror (HiBi-FLM) and a polarization controller is demonstrated experimentally. The measured transmission spectrum of HiBi-FLM covers a wide range from 1525 to 1575 nm. The wavelength of proposed laser can be flexibly tunable during this range of ∼50 nm by adjusting the polarization controller. In addition, the spacing of two wavelengths is adjustable by changing the length of HiBi fiber. The dual-wavelength lasers with the HiBi fiber length of 1 and 2 m are experimentally demonstrated and compared. The experimental results show that the proposed laser can stably operate on two wavelengths simultaneously at room temperature, and the output peak power variation is about 0.5 dB during 40 min.     

Ultranarrow dual-transmission-band fiber Bragg grating filter and its application in a dual-wavelength single-longitudinal-mode fiber ring laser

A fiber Bragg grating filter with ultranarrow dual-transmission bands implemented using the equivalent phase shift technique is demonstrated. A fiber ring laser that incorporates a dual-transmission-band fiber Bragg grating filter in the ring cavity is implemented. Dual-wavelength single-longitudinal-mode lasing with a wavelength spacing as small as 0.147 nm at room temperature is experimentally demonstrated.     

Switchable dual-wavelength fiber ring laser featuring twin-core photonic crystal fiber-based filter

A simple configuration for the generation of a switchable dual-wavelength fiber ring laser is presented.The proposed configuration employs a short twin-core photonic crystal fiber acting as a Mach–Zehnder interferometer at room temperature.A polarization controller is further utilized to enable switchable dualwavelength operation.     

Multi-wavelength fiber ring laser based on a chirped moire fiber grating and a semiconductor optical amplifier

A simple and cost-effective multi-wavelength fiber ring laser based on a chirped Moire fiber grating （CMFG） and a semiconductor optical amplifier （SOA） is proposed. Stable triple-wavelength lasing oscillations at room temperature are experimentally demonstrated. The measured optical signal-to-noise ratio （SNR） reaches the highest value of 50 dB and the power fluctuation of each wavelength is less than 0.2 dB within a 1-h period. To serve as a wavelength selective element, the CMFG possesses excellent comb-like filtering characteristics including stable wavelength interval and ultra-narrow passband, and its fabrication method is easy and flexible. The lasing oscillation shows a narrower bandwidth than SOA-based multi-wavelength fiber lasers utilizing some other kinds of wavelength selective components. Methods to optimize the laser performance are also discussed.     

Hybrid flat gain C-band optical amplifier with Zr-based erbium-doped fiber and semiconductor optical amplifier

An efficient gain-flattened C-band optical amplifier is demonstrated using a hybrid configuration with a Zirconia-based Erbium-doped fibre (Zr-EDF) and a semiconductor optical amplifier (SOA). The amplifier utilizes a two-stage structure with a midway isolator to improve flat gain characteristic and reduce noise figure. At input signal power of −30 dBm, a flat gain of 28 dB is obtained from wavelength region of 1530 to 1560 nm with gain variation of less than 4 dB. The noise figure is maintained below 11 dB at the flat-gain region. This amplifier has the potential to be used in the high channel count dense wavelength division multiplexing system due to its simplicity and compact design.     

A novel actively and passively mode-locked semiconductor optical amplifier fiber ring laser

A novel actively and passively mode-locked semiconductor optical amplifier fiber ring laser was presented, where semiconductor optical amplifier provided cavity gain and introduced nonlinear polarization rotation, whereas, intensity modulator not only acted as modulator but also polarizer. The pulses with duration below 3 ps (FWHM) and peak power about 16 mW at a repetition rate of 10 GHz can be obtained in our system and the system stability may be enhanced. To investigate system parameters effects on mode-locked pulses, a theoretical model was developed.     

Switchable quadruple-wavelength erbium-doped fiber ring laser based on two-segment Lyot-Sagnac filter

We propose and demonstrate a novel switchable quadruple-wavelength erbium-doped fiber ring laser (EDFL) based on two-segment Lyot-Sagnac filter which is used as the wavelength-selective filter. Due to the deeply saturated spectral hole-burning (SHB) effect in an ordinary erbium-doped fiber, the laser realizes stable single-wavelength, dual-wavelength, triple-wavelength, and quadruple-wavelength output by controlling two polarization controllers (PCs) appropriately. The optical signal-to-noise ratio (OSNR) is over 30 dB. The peak fluctuation is less than ~2 dB over 1.5 h at room temperature.     

Suppression of beating noise of narrow-linewidth erbium-doped fiber ring lasers by use of a semiconductor optical amplifier

Beating noise in narrow-linewidth erbium-doped fiber ring lasers puts severe limitations on applications of the lasers. We demonstrate the suppression of beating noise in fiber ring lasers by using a semiconductor optical amplifier in the laser cavity, which acts as a high-pass filter. Two different ring structures are presented as examples to demonstrate this beating noise suppression.