Dissociation of disulfide‐intact somatostatin ions: the roles of ion type and dissociation method

The dissociation chemistry of somatostatin‐14 was examined using various tandem mass spectrometry techniques including low‐energy beam‐type and ion trap collision‐induced dissociation (CID) of protonated and deprotonated forms of the peptide, CID of peptide‐gold complexes, and electron transfer dissociation (ETD) of cations. Most of the sequence of somatostatin‐14 is present within a loop defined by the disulfide linkage between Cys‐3 and Cys‐14. The generation of readily interpretable sequence‐related ions from within the loop requires the cleavage of at least one of the bonds of the disulfide linkage and the cleavage of one polypeptide backbone bond. CID of the protonated forms of somatostatin did not appear to give rise to an appreciable degree of dissociation of the disulfide linkage. Sequential fragmentation via multiple alternative pathways tended to generate very complex spectra. CID of the anions proceeded through CH₂? S cleavages extensively but relatively few structurally diagnostic ions were generated. The incorporation of Au(I) into the molecule via ion/ion reactions followed by CID gave rise to many structurally relevant dissociation products, particularly for the [M+Au+H]²⁺ species. The products were generated by a combination of S? S bond cleavage and amide bond cleavage. ETD of the [M+3H]³⁺ ion generated rich sequence information, as did CID of the electron transfer products that did not fragment directly upon electron transfer. The electron transfer results suggest that both the S? S bond and an N? C_α bond can be cleaved following a single electron transfer reaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Studying disulfide bond rearrangement by MALDI-RTOF PSD and MALDI-TOF/RTOF high-energy CID (20 keV) experiments of peptides derived from ammodytoxins

Ammodytoxins (Atxs) are presynaptically neurotoxic phospholipases present in Vipera ammodytes ammodytes snake venom. Atxs show a high sequence homology and contain 14 cysteines which form seven biologically relevant disulfide bridges-connecting non-neighboring cysteines. Formic acid cleavage was performed to confirm protein sequences by MALDI RTOF MS and resulted in 95.6% sequence coverage exhibiting only few formylations. Cysteine-containing peptides showed adjacent signals 2 and/or 4 Da lower (according to the number of cysteines present in the peptide) than the theoretical molecular weight indicating disulfide bridge rearrangement. Post-source decay (PSD) and high-energy collision-induced dissociation (CID) at 20 keV experiments showed fragmentation pattern unique for the reduced, thiol group containing and the oxidized, disulfide bridge harboring peptides. Besides typical low-energy fragment ions observed during PSD experiments (a-, b-, y-type ions), additional high-energy fragment ions (c-, x-, w-, d-type and internal fragments) of significant intensity were generated during fragmentation at 20 keV. In the case of charge directing N- and C-termini, x- and w-type ions were also observed during PSD. Good and up to complete sequence coverage was achieved for all studied peptides from Atxs in the case of high-energy CID, whereas PSD lacked information particularly for larger peptides.     

Application of MALDI TOF/TOF mass spectrometry and collision-induced dissociation for the identification of disulfide-bonded peptides

This paper describes a method for the fast identification and composition of disulfide-bonded peptides. A unique fragmentation signature of inter-disulfide-bonded peptides is detected using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF)/TOF mass spectrometry and high-energy collision-induced dissociation (CID). This fragmentation pattern identifies peptides with an interconnected disulfide bond and provides information regarding the composition of the peptides involved in the pairing. The distinctive signature produced using CID is a triplet of ions resulting from the cleavage of the disulfide bond to produce dehydroalanine, cysteine or thiocysteine product ions. This method is not applicable to intra-peptide disulfide bonds, as the cleavage mechanism is not the same and a triplet pattern is not observed. This method has been successfully applied to identifying disulfide-bonded peptides in a number of control digestions, as well as study samples where disulfide bond networks were postulated and/or unknown.     

Collision Induced Dissociation Products of Disulfide-Bonded Peptides: Ions Result from the Cleavage of More Than One Bond

Disulfide bonds are a post-translational modification (PTM) that can be scrambled or shuffled to non-native bonds during recombinant expression, sample handling, or sample purification. Currently, mapping of disulfide bonds is not easy because of various sample requirements and data analysis difficulties. One step towards facilitating this difficult work is developing a better understanding of how disulfide-bonded peptides fragment during collision induced dissociation (CID). Most automated analysis algorithms function based on the assumption that the preponderance of product ions observed during the dissociation of disulfide-bonded peptides result from the cleavage of just one peptide bond, and in this report we tested that assumption by extensively analyzing the product ions generated when several disulfide-bonded peptides are subjected to CID on a quadrupole time of flight (QTOF) instrument. We found that one of the most common types of product ions generated resulted from two peptide bond cleavages, or a double cleavage. We found that for several of the disulfide-bonded peptides analyzed, the number of double cleavage product ions outnumbered those of single cleavages. The influence of charge state and precursor ion size was investigated, to determine if those parameters dictated the amount of double cleavage product ions formed. It was found in this sample set that no strong correlation existed between the charge state or peptide size and the portion of product ions assigned as double cleavages. These data show that these ions could account for many of the product ions detected in CID data of disulfide bonded peptides. We also showed the utility of double cleavage product ions on a peptide with multiple cysteines present. Double cleavage products were able to fully characterize the bonding pattern of each cysteine where typical single b/y cleavage products could not.     

A novel salt bridge mechanism highlights the need for nonmobile proton conditions to promote disulfide bond cleavage in protonated peptides under low-energy collisional activation

The gas-phase fragmentation mechanisms of small models for peptides containing intermolecular disulfide links have been studied using a combination of tandem mass spectrometry experiments, isotopic labeling, structural labeling, accurate mass measurements of product ions, and theoretical calculations (at the MP2/6-311 + G(2d,p)//B3LYP/3-21G(d) level of theory). Cystine and its C-terminal derivatives were observed to fragment via a range of pathways, including loss of neutral molecules, amide bond cleavage, and S-S and C-S bond cleavages. Various mechanisms were considered to rationalize S-S and C-S bond cleavage processes, including charge directed neighboring group processes and nonmobile proton salt bridge mechanism. Three low-energy fragmentation pathways were identified from theoretical calculations on cystine N-methyl amide: (1) S-S bond cleavage dominated by a neighboring group process involving the C-terminal amide N to form either a protonated cysteine derivative or protonated sulfenyl amide product ion (44.3 kcal mol(-1)); (2) C-S bond cleavage via a salt bridge mechanism, involving abstraction of the alpha-hydrogen by the N-terminal amino group to form a protonated thiocysteine derivative (35.0 kcal mol(-1)); and (3) C-S bond cleavage via a Grob-like fragmentation process in which the nucleophilic N-terminal amino group forms a protonated dithiazolidine (57.9 kcal mol(-1)). Interestingly, C-S bond cleavage by neighboring group processes have high activation barriers (63.1 kcal mol(-1)) and are thus not expected to be accessible during low-energy CID experiments. In comparison to the energetics of simple amide bond cleavage, these S-S and C-S bond cleavage reactions are higher in energy, which helps rationalize why bond cleavage processes involving the disulfide bond are rarely observed for low-energy CID of peptides with mobile proton(s) containing intermolecular disulfide bonds. On the other hand, the absence of a mobile proton appears to "switch on" disulfide bond cleavage reactions, which can be rationalized by the salt bridge mechanism. This potentially has important ramifications in explaining the prevalence of disulfide bond cleavage in singly protonated peptides under MALDI conditions.     

Rapid mass spectral identification of contryphans. Detection of characteristic peptide ions by fragmentation of intact disulfide-bonded peptides in crude venom

The mass spectrometric cleavage of intact disulfide-bonded peptides in conus venom has been investigated. Contryphans containing a single disulfide bond are shown to fragment preferentially at X-Pro bonds, giving rise to linearized, unsymmetrical cystine peptides, which subsequently fragment by multiple pathways at the disulfide bridge. Cleavage at the disulfide bond can be initiated by initial loss of the CalphaH or CbetaH proton, resulting in distinct product ions, with the subsequent loss of elemental sulfur, H2S or H2S2. Contryphans from Conus amadis, Conus loroisii, and Conus striatus are presented as examples, in which detailed assignment of the product ions resulting from tandem mass spectrometric analysis of the intact disulfide is also accomplished. Characteristic fragments arising from conserved contryphan sequences can be used as diagnostic, permitting rapid identification of this class of peptides in crude venom. The observed fragment ions obtained for contryphans in diverse cone snail species are also compared.     

Comparison of collision-induced dissociation and electron-induced dissociation of <Emphasis Type="Italic">singly protonated</Emphasis> aromatic amino acids,cystine and related simple peptides using a hybrid linear ion trap–FT-ICR mass spectrometer

The gas-phase fragmentation reactions of singly protonated aromatic amino acids, their simple peptides as well as simple models for intermolecular disulfide bonds have been examined using a commercially available hybrid linear ion trap-Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. Low-energy collision-induced dissociation (CID) reactions within the linear ion trap are compared with electron-induced dissociation (EID) reactions within the FT-ICR cell. Dramatic differences are observed between low-energy CID (which occurs via vibrational excitation) and EID. For example, the aromatic amino acids mainly fragment via competitive losses of NH(3) and (H(2)O+CO) under CID conditions, while side-chain benzyl cations are major fragment ions under EID conditions. EID also appears to be superior in cleaving the S-S and S-C bonds of models of peptides containing an intermolecular disulfide bond. Systematic studies involving fragmentation as a function of electron energy reveal that the fragmentation efficiency for EID occurs at high electron energy (more than 10 eV) compared with the low-electron energy (less than 0.2 eV) typically observed for electron capture dissociation fragmentation. Finally, owing to similarities between the types of fragment ions observed under EID conditions and those previously reported in ultraviolet photodissociation experiments and the electron-ionization mass spectra, we propose that EID results in fragmentation via electronic excitation and vibrational excitation. EID may find applications in analyzing singly charged molecular ions formed by matrix-assisted laser desorption ionization.     

Electrospray tandem mass spectrometry analysis of S- and N-nitrosopeptides: Facile loss of NO and radical-induced fragmentation

The covalent addition of nitric oxide (NO) to protein thiols, a posttranslational modification termed S-nitrosation, is a ubiquitous event that modulates diverse cellular processes. The in vivo addition of NO to protein amines (N-nitrosation) has also been described and may similarly modify protein structure and function. While mass spectrometry has been employed for identification of nitrosoproteins, little is known about how S- and N-nitrosopeptides fragment. Such knowledge is important for its potential to inform on sites of protein nitrosation. Here we used electrospray tandem mass spectrometry to elucidate collision-induced dissociation (CID) features of S- and N-nitrosopeptide ions. We show that S- and N-nitrosopeptide ions readily lose NO, giving rise to species that contain thiyl and aminyl radicals, respectively. Fragmentation (MS3) of these radical peptide ions revealed an atypical pattern, characterized by the cleavage of select alphaCC and NalphaC bonds, rather than the more usual cleavage of amide bonds that result in b- and y-ions. These unanticipated fragmentation patterns are reconciled by radical-mediated abstraction of hydrogen from beta-carbon followed by beta-fragmentation. For thiyl radical peptides, we also observed dominant loss of SH and CH2SH from the Cys side-chain. Our findings provide new insights into the gas-phase chemistry of NO-modified peptide ions and suggest an unusual fragmentation pattern that may aid in future MS-based attempts to define the nitrosoproteome.     

Collision-Induced Dissociation Fragmentation Inside Disulfide C-Terminal Loops of Natural Non-Tryptic Peptides

Collision-induced dissociation (CID) spectra of long non-tryptic peptides are usually quite complicated and rather difficult to interpret. Disulfide bond formed by two cysteine residues at C-terminus of frog skin peptides precludes one to determine sequence inside the forming loop. Thereby, chemical modification of S–S bonds is often used in “bottom up” sequencing approach. However, low-energy CID spectra of natural non-tryptic peptides with C-terminal disulfide cycle demonstrate an unusual fragmentation route, which may be used to elucidate the “hidden” C-terminal sequence. Low charge state protonated molecules experience peptide bond cleavage at the N-terminus of C-terminal cysteine. The forming isomeric acyclic ions serve as precursors for a series of b-type ions revealing sequence inside former disulfide cycle. The reaction is preferable for peptides with basic lysine residues inside the cycle. It may also be activated by acidic protons of Asp and Glu residues neighboring the loop. The observed cleavages may be quite competitive, revealing the sequence inside disulfide cycle, although S–S bond rupture does not occur in this case.

The dehydroalanine effect in the fragmentation of ions derived from polypeptides

The fragmentation of peptides and proteins upon collision‐induced dissociation (CID) is highly dependent on sequence and ion type (e.g. protonated, deprotonated, sodiated, odd electron, etc.). Some amino acids, for example aspartic acid and proline, have been found to enhance certain cleavages along the backbone. Here, we show that peptides and proteins containing dehydroalanine, a non‐proteinogenic amino acid with an unsaturated side‐chain, undergo enhanced cleavage of the N—Cα bond of the dehydroalanine residue to generate c‐ and z‐ions. Because these fragment ion types are not commonly observed upon activation of positively charged even‐electron species, they can be used to identify dehydroalanine residues and localize them within the peptide or protein chain. While dehydroalanine can be generated in solution, it can also be generated in the gas phase upon CID of various species. Oxidized S‐alkyl cysteine residues generate dehydroalanine upon activation via highly efficient loss of the alkyl sulfenic acid. Asymmetric cleavage of disulfide bonds upon collisional activation of systems with limited proton mobility also generates dehydroalanine. Furthermore, we show that gas‐phase ion/ion reactions can be used to facilitate the generation of dehydroalanine residues via, for example, oxidation of S‐alkyl cysteine residues and conversion of multiply‐protonated peptides to radical cations. In the latter case, loss of radical side‐chains to generate dehydroalanine from some amino acids gives rise to the possibility for residue‐specific backbone cleavage of polypeptide ions. Copyright © 2016 John Wiley & Sons, Ltd.     

Fragmentation of peptides with intra-chain disulfide bonds in triple quadrupole mass spectrometry and its quantitative application to biological samples

A growing number of peptides are being used today in bioanalytical laboratories. Because of this, there is an increasing interest in the development of highly sensitive, specific and robust liquid chromatography/tandem mass spectrometry (LC/MS/MS) assays for the quantitative analysis of peptides in biological samples. Among the mass spectrometers previously used for peptide quantification, triple quadrupole mass spectrometers are generally not considered the instrument of choice. With this instrumentation, collision cascades or multiple fragmentations tend to generate multiple peaks that have weak intensities. This leads to a loss in detection sensitivity. However, in cases where immonium product ions were formed in abundance, it was found that peptide quantification succeeded. A common feature of these peptides is their intra-loop structure. To elucidate the usefulness of this feature in fragmentation, several peptide analytes with intra-chain disulfide bonds were investigated in this study, including a newly synthesized analog having a single amino acid substitution. The results presented here indicate that abrupt bond cleavage from the intra-loop structure of peptides could be one of the premises for intense immonium ion generation. In contrast, any preferential cleavage of peptide bonds (e.g., proline effect) that gives rise to a linearized sequence would break the intactness of the loop and prevent it from completely dissociating. In addition, the utilization of immonium product ions in LC/MS/MS was demonstrated for the determination of peptides with intra-chain disulfide bonds in biological fluids.     

Effects of Electron-Transfer Coupled with Collision-Induced Dissociation (ET/CID) on Doubly Charged Peptides and Phosphopeptides

Electron-transfer dissociation (ETD) is a useful peptide fragmentation technique that can be applied to investigate post-translational modifications (PTMs), the sequencing of highly hydrophilic peptides, and the identification of large peptides and even intact proteins. In contrast to traditional fragmentation methods, such as collision-induced dissociation (CID), ETD produces c- and z^·-type product ions by randomly cleaving the N–Cα bonds. The disappointing fragmentation efficiency of ETD for doubly charged peptides and phosphopeptide ions has been improved by ETcaD (supplemental activation). However, the ETD data derived from most database search algorithms yield low confidence scores due to the presence of unreacted precursors and charge-reduced ions within MS/MS spectra. In this work, we demonstrate that eight out of ten standard doubly charged peptides and phosphopeptides can be effortlessly identified by electron-transfer coupled with collision-induced dissociation (ET/CID) using the SEQUEST algorithm without further spectral processing. ET/CID was performed with the further dissociation of the charge-reduced ions isolated from ETD ion/ion reactions. ET/CID had high fragmentation efficiency, which elevated the confidence scores of doubly charged peptide and phosphospeptide sequencing. ET/CID was found to be an effective fragmentation strategy in “bottom-up” proteomic analysis.     

Electron Transfer Dissociation (ETD) of Peptides Containing Intrachain Disulfide Bonds

The fragmentation chemistry of peptides containing intrachain disulfide bonds was investigated under electron transfer dissociation (ETD) conditions. Fragments within the cyclic region of the peptide backbone due to intrachain disulfide bond formation were observed, including: c (odd electron), z (even electron), c-33 Da, z + 33 Da, c + 32 Da, and z–32 Da types of ions. The presence of these ions indicated cleavages both at the disulfide bond and the N–Cα backbone from a single electron transfer event. Mechanistic studies supported a mechanism whereby the N–Cα bond was cleaved first, and radical-driven reactions caused cleavage at either an S–S bond or an S–C bond within cysteinyl residues. Direct ETD at the disulfide linkage was also observed, correlating with signature loss of 33 Da (SH) from the charge-reduced peptide ions. Initial ETD cleavage at the disulfide bond was found to be promoted amongst peptides ions of lower charge states, while backbone fragmentation was more abundant for higher charge states. The capability of inducing both backbone and disulfide bond cleavages from ETD could be particularly useful for sequencing peptides containing intact intrachain disulfide bonds. ETD of the 13 peptides studied herein all showed substantial sequence coverage, accounting for 75%–100% of possible backbone fragmentation.     

Fragmentation of peptide disulfides under conditions of negative ion mass spectrometry: Studies of oxidized glutathione and contryphan

The fragmentation of positive and negative ions of peptide disulfides under mass spectrometric conditions yields distinctly different product ion distributions. A negative ion upon collision induced dissociation yields intense product ions, which correspond to cleavage at the disulfide linkage. The complete assignment of the product ions obtained upon fragmentation of oxidized glutathione in an ion trap is presented. The cleavage at the disulfide site is mediated by abstraction of CalphaH and CbetaH protons resulting in product ions derived by neutral loss of H2S2 and H2S. The formation of peptide thioaldehydes and persulfides at the cysteine sites is established. Dehydroalanine formation at the Cys residue is predominant. The case of a contryphan, a cyclic peptide disulfide derived from Conus snail venom, illustrates the utility of negative ion mass spectrometry in disulfide identification. Complementary information is derived by combining the fragmentation patterns obtained from positive and negative ions of disulfide containing peptides.     

Identification of Proteins and Phosphoproteins Using Pulsed Q Collision Induced Dissociation (PQD)

Pulsed Q collision induced dissociation (PQD) was developed to facilitate detection of low-mass reporter ions from labeling reagents (e.g., iTRΑQ) in peptide quantification using an LTQ mass spectrometer (MS). Despite the large number of linear ion traps worldwide, the use and optimization of PQD for protein identification have been limited, in part due to less effective ion fragmentation relative to the collision induced dissociation (CID). PQD expands the m/z coverage of fragment ions to the lower m/z range by circumventing the typical low mass cut-off of an ion trap MS. Since database searching relies on the matching between theoretical and observed spectra, it is not clear how ion intensity and peak number might affect the outcomes of a database search. In this report, we systematically evaluated the attributes of PQD mass spectra, performed intensity optimization, and assessed the benefits of using PQD on the identification of peptides and phosphopeptides from an LTQ. Based on head-to-head comparisons between CID (higher intensity) and PQD (better m/z coverage), peptides identified using PQD generally have Xcorr scores lower than those using CID. Such score differences were considerably diminished by the use of 0.1% m-nitrobenzyl alcohol (m-NBA) in mobile phases. The ion intensities of both CID and PQD were adversely affected by increasing m/z of the precursor, with PQD more sensitive than CID. In addition to negating the 1/3 rule, PQD enhances direct bond cleavage and generates patterns of fragment ions different from those of CID, particularly for peptides with a labile functional group (e.g., phosphopeptides). The higher energy fragmentation pathway of PQD on peptide fragmentation was further compared to those of CID and the quadrupole-type activation in parallel experiments.     

Evaluation of low energy CID and ECD fragmentation behavior of mono-oxidized thio-ether bonds in peptides

Thio-ether bonds in the cysteinyl side chain of peptides, formed with the most commonly used cysteine blocking reagent iodoacetamide, after conversion to sulfoxide, releases a neutral fragment mass in a low-energy MS/MS experiment in the gas phase of the mass spectrometer [6]. In this study, we show that the neutral loss fragments produced from the mono-oxidized thio-ether bonds (sulfoxide) in peptides, formed by alkyl halide or double-bond containing cysteine blocking reagents are different under low-energy MS/MS conditions. We have evaluated the low-energy fragmentation patterns of mono-oxidized modified peptides with different cysteine blocking reagents, such as iodoacetamide, 3-maleimidopropionic acid, and 4-vinylpyridine using FTICR-MS. We propose that the mechanisms of gas-phase fragmentation of mono-oxidized thio-ether bonds in the side chain of peptides, formed by iodoacetamide and double-bond containing cysteine blocking reagents, maleimide and vinylpyridine, are different because of the availability of acidic beta-hydrogens in these compounds. Moreover, we investigated the fragmentation characteristics of mono-oxidized thio-ether bonds within the peptide sequence to develop novel mass-spectrometry identifiable chemical cross-linkers. This methionine type of oxidized thio-ether bond within the peptide sequence did not show anticipated low-energy fragmentation. Electron capture dissociation (ECD) of the side chain thio-ether bond containing oxidized peptides was also studied. ECD spectra of the oxidized peptides showed a greater extent of peptide backbone cleavage, compared with CID spectra. This fragmentation information is critical to researchers for accurate data analysis of this undesired modification in proteomics research, as well as other methods that may utilize sulfoxide derivatives.     

基于化学衍生和CID碎裂模式鉴定蛋白精氨酸-ADP-核糖基化的新方法

建立了一种新的基于碰撞诱导解离（CID）碎裂模式鉴定精氨酸-腺苷二磷酸（ADP）-核糖基化多肽的新方法. 首先,在碱性条件下将精氨酸-ADP-核糖基化血管紧张素-Ⅰ转变为鸟氨酸化血管紧张素-Ⅰ,或在磷酸二酯酶和碱性磷酸酶处理下水解为精氨酸核糖基化血管紧张素-Ⅰ,然后对上述2种衍生物进行基于CID碎裂模式的串联质谱分析. 结果表明,与未衍生的精氨酸-ADP-核糖基化血管紧张素-Ⅰ相比,在鸟氨酸化血管紧张素-Ⅰ和精氨酸核糖基化血管紧张素-Ⅰ的质谱图上发现大部分来自于肽骨架碎裂的离子峰,可提供足够的序列信息以确定精氨酸-ADP-核糖基化位点.     

Disulfide bond creates a small connecting loop in aminoxy peptide backbone

Disulfide-bond formation between the side chains of cysteine-cysteine pairs is often critical to the folding behavior, stability, and functionality of proteins. In this paper, we report that sulfur atoms can be introduced into the amide groups of aminoxy peptides to form a novel type of disulfide bridge, which creates a connecting loop in the peptide backbone.     

Gas-Phase Fragmentation of [M + nH + OH]<Superscript>n•+</Superscript> Ions Formed from Peptides Containing Intra-Molecular Disulfide Bonds

In this study, we systematically investigated gas-phase fragmentation behavior of [M + nH + OH]^n•+ ions formed from peptides containing intra-molecular disulfide bond. Backbone fragmentation and radical initiated neutral losses were observed as the two competing processes upon low energy collision-induced dissociation (CID). Their relative contribution was found to be affected by the charge state (n) of [M + nH + OH]^n•+ ions and the means for activation, i.e., beam-type CID or ion trap CID. Radical initiated neutral losses were promoted in ion-trap CID and for lower charge states where mobile protons were limited. Beam-type CID and dissociation of higher charge states of [M + nH + OH]^n•+ ions generally gave abundant backbone fragmentation, which was highly desirable for characterizing peptides containing disulfide bonds. The amount of sequence information obtained from CID of [M + nH + OH]^n•+ ions was compared with that from CID of disulfide bond reduced peptides. For the 11 peptides studied herein, similar extent of sequence information was obtained from these two methods.     

Mass spectrometric and quantum mechanical analysis of gas-phase formation, structure, and decomposition of various b2 ions and their specifically deuterated analogs

B ions represent an important type of fragment ions derived from protonated peptides by cleavage of an amide bond with N-terminal charge retention. Such species have also been discussed as key intermediates during cyclic peptide fragmentation. Detailed structural information on such ion types can facilitate the interpretation of multiple step fragmentations such as the formation of inner chain fragments from linear peptides or the fragmentation of cyclic peptides. The structure of different b₂ ion isomers was investigated with collision-induced dissociations (CID) in combination with hydrogen/deuterium (H/D) exchange of the acidic protons. Special care was taken to investigate fragment ions derived from pure gas-phase processes. Structures deduced from the results of the CID analysis were compared with structures predicted on the basis of quantum chemical density functional theory (DFT) calculations to be most stable. The results pointed to different types of structures for b₂ ion isomers of complementary amino acid sequences. Either the protonated oxazolone structure or the N-terminally protonated immonium ion structure were proposed on the basis of the CID results and the DFT calculations. In addition, the analysis of different selectively N-alkylated peptide analogs revealed mechanistic details of the processes generating b ions.