Circulation microchannel for liquid–liquid microextraction

A new method has been developed for liquid–liquid microextraction utilizing a circulation microchannel. A glass microchemical chip having a circular shallow microchannel in contact with a surrounding deeper microchannel was fabricated by a two-step photolithographic wet-etching technique. Surface modification reagent was selectively introduced to the shallow channel by utilizing capillary force, and the surface of the shallow channel was selectively made hydrophobic. With the aid of the hydrophobic/hydrophilic surface patterning, it was possible to keep organic solvent in the circular channel while the aqueous sample solution was continuously flowing in the deep channel. As a result, concentration extraction from sample solution to stationary extractant with a nanoliter scale volume became possible. Concentration extraction has been difficult in a multiphase continuous flow. Function of the newly developed microextraction system was verified with methyl red as a test sample, and concentration extraction to reach equilibrium was successfully carried out. A novel surface modification method utilizing frozen liquid as a masking material was also developed as a reverse process to make the shallow channel hydrophilic and the deep channel hydrophobic. Visualization of circulation motion inside the circular shallow channel induced by flow in the deep channel was observed with a particle tracing method.     

绿色环保特殊浸润性纺织品的前沿进展

介绍了仿生超疏表面的工作机制以及疏水整理液的发展, 系统综述了近10年来特殊浸润性在开拓多功能绿色纺织领域的研究进展, 讨论了双面超疏、 超疏/超亲、 图案化及可响应浸润性纺织品的制备技术及应用, 介绍近几年在纺织品疏水化功能改性方面取得的前瞻性工作, 包括自清洁防污、 油水分离、 机械耐久、 图案化、 自修复、 单向运输等, 特别是在智能响应、 电子可穿戴、 能源等新兴领域方面的应用. 最后, 对超疏水纺织功能材料目前所面临的挑战及未来发展的方向进行了展望.     

Patterned superhydrophobic paper for microfluidic devices obtained by writing and printing

This work outlines inexpensive patterning methodologies to create open-air microfluidic paper-based devices. A phase-separation methodology was used to obtain biomimetic superhydrophobic paper, hierarchically composed by micro and nano topographies. Writing and printing are simple actions that can be used to pattern flat superhydrophobic paper with more wettable channels. In particular, inkjet printing permits controlling the wettability of the surface by changing the darkness of the printed regions. The difference between capillary forces provides the possibility to control and drive liquid flows through the open path lines, just by titling the piece of paper. Additionally, maintaining a continuous flow, it is possible to direct the liquid at different volumetric rates in a horizontal position along non-linear channel paths printed/written over the surface.     

A topography/chemical composition gradient polystyrene surface: toward the investigation of the relationship between surface wettability and surface structure and chemical composition

In this paper, we have prepared of a topography/chemical composition gradient polystyrene (PS) surface, i.e., an orthogonal gradient surface, to investigate the relationship between surface wettability and surface structure and chemical composition. The prepared surface shows a one-dimensional gradient in wettability in the x, y, and diagonal directions, including hydrophobic to hydrophilic, superhydrophobic to hydrophobic, superhydrophobic to superhydrophilic gradients, and so forth. These one-dimensional gradients have different gradient values, gradient range, and contact angle hysteresis, which lie on both the surface roughness and the surface compositions. From the trend of variation of contact angle hysteresis, it can be concluded that the transition from the Cassie's model to the Wenzel's model occurs both by decreasing surface roughness and by increasing surface hydrophilic compositions. Moreover, the transition is more effective via changing surface chemical composition than changing surface roughness herein.     

Plasma Hydrophilization of Superhydrophobic Surface and Its Aging Behavior: The Effect of Micro/nanostructured Surface

Plasma treatment is a versatile tool for surface modifications, and plasma‐induced hydrophilicity has a well‐known aging behavior. In this paper, plasma hydrophilization and the subsequent aging behavior of superhydrophobic and hydrophobic surfaces are comparatively investigated. Static water contact angle measurement and X‐ray photoelectron spectroscopy show that, compared with the hydrophobic surface, the superhydrophobic surface requires more plasma dose to completely change its wettability even after considering the difference in their initial wettability, and the corresponding aging speed is also obviously retarded. A tentative model based on the surface micro/nanostructures is presented to explain the results. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of laser micro- and nanotexturing for the fabrication of superhydrophobic corrosion-resistant coatings on aluminum

A new efficient method for the fabrication of corrosion-resistant composite superhydrophobic coatings on aluminum and its alloys is presented. The laser micro- and nanotexturing of the surface combined with the deposition of a hydrophobic agent makes it possible to obtain superhydrophobic coatings with unique properties on aluminum materials. The complex studies by electrochemical methods and wettability analysis showed that the proposed type of coatings is characterized by very high resistance to corrosion, including pitting resistance, and by the durability of the superhydrophobic state upon prolonged contact with aqueous chloride-containing media.     

Novel combination of hydrophilic/hydrophobic surface for large wettability difference and its application to liquid manipulation

This paper reports a novel combination of hydrophilic/hydrophobic materials for the evolution of liquid manipulation. Droplet generation based on a hydrophilic/hydrophobic mechanism is a promising method for highly accurate liquid manipulations. Although several droplet manipulation devices utilizing hydrophilic/hydrophobic patterns have been reported, it has been difficult to split fluid into droplets solely through hydrophilic/hydrophobic patterns in a microchannel. In this study, a material combination for fabricating hydrophilic/hydrophobic patterns was investigated and their wettability difference was enhanced for droplet generation. To improve hydrophilicity, we attempted to increase the surface area of silicon oxide through pulsed plasma chemical vapor deposition (PPCVD). To improve hydrophobicity, the damage to the hydrophobic patterns in the fabrication process was reduced. We successfully enhanced the difference in contact angles from 54.3° to 86.6° by combining the developed hydrophilic material and hydrophobic material. The developed material combination could successfully split fluid into a quantitative droplet of 14.1 nL in a microfluidic chip. Because the developed hydrophilic/hydrophobic combination enables the formation of a droplet with desirable shape in microchannels, the developed hydrophilic/hydrophobic combination is a promising component for lab-on-a-chip applications.     

Smart Titanium Wire Used for the Evaluation of Hydrophobic/Hydrophilic Interaction by In-Tube Solid Phase Microextraction

Evaluation of the hydrophobic/hydrophilic interaction individually between the sorbent and target compounds in sample pretreatment is a big challenge. Herein, a smart titanium substrate with switchable surface wettability was fabricated and selected as the sorbent for the solution. The titanium wires and meshes were fabricated by simple hydrothermal etching and chemical modification so as to construct the superhydrophilic and superhydrophobic surfaces. The micro/nano hierarchical structures of the formed TiO₂ nanoparticles in situ on the surface of Ti substrates exhibited the switchable surface wettability. After UV irradiation for about 15.5 h, the superhydrophobic substrates became superhydrophilic. The morphologies and element composition of the wires were observed by SEM, EDS, and XRD, and their surface wettabilities were measured using the Ti mesh by contact angle goniometer. The pristine hydrophilic wire, the resulting superhydrophilic wire, superhydrophobic wire, and the UV-irradiated superhydrophilic wire were filled into a stainless tube as the sorbent instead of the sample loop of a six-port valve for on-line in-tube solid-phase microextraction. When employed in conjunction with HPLC, four kinds of wires were comparatively applied to extract six estrogens in water samples. The optimal conditions for the preconcentration and separation of target compounds were obtained with a sample volume of 60 mL, an injection rate of 2 mL/min, a desorption time of 2 min, and a mobile phase of acetonile/water (47/53, v/v). The results showed that both the superhydrophilic wire and UV-irradiated wire had the highest extraction efficiency for the polar compounds of estrogens with the enrichment factors in the range of 20–177, while the superhydrophobic wire exhibited the highest extraction efficiency for the non-polar compounds of five polycyclic aromatic hydrocarbons (PAHs). They demonstrated that extraction efficiency was mainly dependent on the surface wettability of the sorbent and the polarity of the target compounds, which was in accordance with the molecular theory of like dissolves like.     

Facile Spray-Coating for Fabrication of Superhydrophobic SiO2/PVDF Nanocomposite Coating on Paper Surface

A facile and low-cost superhydrophobic nanocomposite coating on paper surface was fabricated through one-step simply spraying dispersion, using hydrophobic silica nanoparticles as a filter (SiNPs) and polyvinylidene fluoride (PVDF) as a film-forming material. Hydrophobic SiNPs were fabricated via co-hydropholysis and condensation of TEOS and long-chain alkyl silane based on a simple sol-gel process, and the surface chemical structure of SiNPs was characterized by Fourier transform infrared (FTIR) spectra. The wettability and morphology of the coating surface were measured by contact angle (CA) measurement and scanning electron microscope, respectively. The influence of the mass ratio of hydrophobic SiNPs to PVDF (M(SiNPs:PVDF)) on the superhydrophobicity of paper surface was studied. The results showed that when M(SiNPs:PVDF) was 3:1, the water CA was 156.0 ± 1.0° for the nanocomposite coating with micro/nano-hierarchical structure on paper surface. Further, such superhydrophobic nanocomposite coatings on paper surface showed little adhesive property with water. In addition, the prepared superhydrophobic nanocomposite coating could be applied in other substrates, such as wood, aluminum sheet, stainless steel, polytetrafluoroethylene (PTFE), etc.     

Wettability control of a solid surface by utilizing photocatalysis

This paper describes a strategic approach utilizing a photocatalyst to obtain a solid surface with a high level of sustainable wettability (hydrophilicity or hydrophobicity). We clarified that the substances adsorbed on the surface could be successfully removed by photocatalytic oxidation resulting in sustainable high hydrophilic and high hydrophobic states. In addition to the conventional redox reaction, photoinduced wettability conversion plays an inevitable role in obtaining a superhydrophilic state. Both of the aforementioned photoinduced properties can be applied to sustain a high level of hydrophilicity. A superhydrophobic surface can be designed based on the Cassie theory. However, a combination with the usual TiO₂ photocatalyst leads to a decrease in hydrophobicity because the photocatalyst becomes hydrophilic itself as a result of the photoinduced hydrophilic reaction. Utilizing the newly developed hydroxyapatite doped with Ti(IV) ions (TiHAP) photocatalyst, which has a considerably reduced hydrophilic effect, a superhydrophobic surface can be sustained after exposing it to outdoor conditions for a long period. As for sustaining the hydrophobic state, the introduction of a material design based on dynamic wettability leads to the possibility of novel functional materials with a high dynamic hydrophobicity. Our study shows that a high level of wettability (hydrophilic or hydrophobic) of a solid surface as that sustained by biologic action is possible by utilizing photocatalysis. © 2008 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 8: 279–290; 2008: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.20154     

Sustained superhydrophobic friction reduction at high liquid pressures and large flows

This Article introduces and experimentally explores a novel self-regulating method for reducing the friction losses in large microchannels at high liquid pressures and large liquid flows, overcoming previous limitations with regard to sustainable liquid pressure on a superhydrophobic surface. Our design of the superhydrophobic channel automatically adjusts the gas pressure in the lubricating air layer to the local liquid pressure in the channel. This is achieved by pneumatically connecting the liquid in the microchannel to the gas-pockets trapped at the channel wall through a pressure feedback channel. When liquid enters the feedback channel, it compresses the air and increases the pressure in the gas-pocket. This reduces the pressure drop over the gas-liquid interface and increases the maximum sustainable liquid pressure. We define a dimensionless figure of merit for superhydropbic flows, W(F) = P(L)D/γ cos(θ(c)), which expresses the fluidic energy carrying capacity of a superhydrophobic microchannel. We experimentally verify that our geometry can sustain three times higher liquid pressure before collapsing, and we measured better friction-reducing properties at higher W(F) values than in previous works. The design is ultimately limited in time by the gas-exchange over the gas-liquid interface at pressures exceeding the Laplace pressure. This method could be applicable for reducing near-wall laminar friction in both micro and macro scale flows.     

特殊浸润性表面的液滴凝结

以铝片为基底, 经电化学腐蚀和沸水处理制备了多级微纳米结构; 通过气相沉积和涂油分别制备了超疏水表面、 疏水超润滑(slippery)表面和亲水slippery表面; 探究了表面不同的特殊浸润性(超亲水、 超疏水、 疏水slippery和亲水slippery)对液滴凝结的影响. 结果表明, 超亲水表面的液滴凝结属于膜状冷凝, 超疏水表面和slippery表面的液滴凝结均属于滴状冷凝. 超疏水表面液滴合并时, 合并的液滴会不定向弹离表面. 疏水slippery表面和亲水slippery表面由于表面浸润性的不同导致液滴成核密度和液滴合并的差异, 亲水slippery表面凝结液滴的最大体积远大于疏水slippery表面凝结液滴的最大体积. 4种表面的雾气收集效率由大到小依次为亲水slippery表面>疏水slippery表面>超亲水表面>超疏水表面.     

Tunable wettability of polyimide films based on electrostatic self-assembly of ionic liquids

We have demonstrated that the surface wettability of negatively charged polyimide films could be tuned by electrostatic self-assembly of ionic liquids. The water contact angles of the polyimide films varied in the range 27-80 degrees for 13 different ionic liquids based on imidazolium and ammonium salts. The surface morphology of the resulting surfaces was characterized using atomic force microscopy. The results revealed that the assembly of longer-substituent cations was characterized by the formation of spherical nanoparticles that were formed due to sequent aggregation of cations on those electrostatically assembled ones via hydrophobic interaction. In this case, the counteranions are present in the assembled layers and the wettability is accordingly affected. Whereas for shorter-substituent cations, no aggregates were formed due to the less hydrophobic interaction than the electrostatic repulsive interaction between the cations, and the counteranions were absent from the assembled layers. This method can also be utilized to quantify the hydrophobicity of various ionic liquids.     

超疏水性表面在冷凝条件下的润湿特性

采用测量接触角和观测偏光显微镜对超疏水表面在冷凝条件下的疏水特性进行了研究, 发现冷凝蒸汽进入超疏水表面的微凸起内冷凝, 表面的疏水特性被破坏, 表面的润湿特性变得不均匀, 部分区域甚至呈现亲水状态. 根据实验结果提出了冷凝条件下粗糙表面表观接触角的计算模型, 并使用冷凝条件下表面接触角的测量结果进行了验证.     

Several surfaces with special wettability: Influence on spreading and motion of W/O emulsion droplets

Physical and chemical modifications were made on the surface of the aluminum sheet to change the surface properties and superhydrophobic–hydrophilic wettability gradient surface was made on the perspex surface by using microstructure-pattering technique and self-assembled-monolayer method. By using high-speed video camera system and optical tensiometer, this paper discusses the influence of special surfaces with different wettability on spreading and motion of water, oil, and W/O emulsion droplets both experimentally and theoretically. In addition, the paper also discusses the influence of the superhydrophobic–hydrophilic wettability gradient on fluidity of W/O emulsion droplets and the coalescence process of droplets. The results showed that the contact angle of W/O emulsion droplets on the modified surfaces was related to the water and oil distribution at the three-phase line. On the wettability gradient surface, the droplet moved spontaneously when the droplet was located at the junction of the gradient. A quasi-steady theoretical model was used to analyze the driving and resistant forces acting on a droplet to improve the understanding of the self-transport behavior of the droplets.     

A Simple,Low-cost Method to Fabricate Drag-reducing Coatings on a Macroscopic Model Ship

A low-cost method was used to fabricate superhydrophobic coatings on a macroscopic model ship and the drag-reducing effect was investigated at both low and high speed. Hierarchical structures of the superhydrophobic copper coatings were characterized by means of scanning electron microscopy(SEM) and X-ray diffraction(XRD). Drag coefficient tests on surfaces with different wettability(superhydrophilic, hydrophilic, hydrophobic and superhydrophobic surfaces) showed that the as-prepared superhydrophobic surface exhibited a high remarkable drag reduction of 81% at a low speed of 1 mm/s. In the drag-reducing tests with model ship, the superhydrophobic coatings also exhibited around 16% drag reduction at a velocity of 0.3 m/s.     

Superhydrophobic ceria on aluminum and its corrosion resistance

Superhydrophobic ceria on the aluminum substrate was fabricated, and its corrosion resistance was investigated by different techniques. For example, the so‐obtained superhydrophobic sample was immersed into the NaCl aqueous solution, and the variations in the surface wettability as well as the surface morphology were monitored; potentiodynamic polarization in the NaCl aqueous solution was adopted to evaluate its electrochemical corrosion resistance; a droplet of the aqueous solution HCl was dripped onto the superhydrophobic surface, and the corrosion process as well as the surface morphology after corrosion was monitored. The experimental results showed that the superhydrophobic ceria possessed a good corrosion resistance because of the entrapped air in the solid/liquid interface. Copyright © 2016 John Wiley & Sons, Ltd.     

Plasma etched polymer microelectrochemical systems

This paper presents a novel technique based on plasma etching for the mass production of polymer microchip devices. The method consists of the patterning of a photo-resist by a high resolution printer on a foil composed of three layers (5 microm copper/50 microm polyimide/5 microm copper). After this step, both copper layers are chemically etched in order to serve as a contact mask on the polyimide surface so as to produce the desired microstructure pattern. The foil is placed into a reactive plasma chamber in order to etch the exposed polyimide by means of an oxidizing plasma. The method enables holes, lines or larger areas to be etched, thereby generating either microholes, microchannels or electrodes in the plastic material. The copper can then be chemically removed or further patterned to produce conductive pads which are further electroplated with gold. The microchannel is then covered with a polyethylene terephthalate/polyethylene (PET/PE) lamination. The strength of this technology is that access holes for the fluid inlet and outlet, as well as gold coated electrodes can be fabricated without post-processing in a batch process. Demonstration of the application of such microelectrochemical systems is shown here by voltammetric detection inside a 60 nL microchannel, which presents the special feature of linear depletion of the analytes in the direction parallel to the microchannel.     

Markedly controllable adhesion of superhydrophobic spongelike nanostructure TiO2 films

A simple electrochemical and self-assembly method was adopted for the fabrication of superhydrophobic spongelike nanostructured TiO2 surfaces with markedly controllable adhesion. Water adhesion ranging from ultralow (5.0 microN) to very high (76.6 microN) can be tuned through adjusting the nitro cellulose dosage concentrations. The detailed experiments and analyses have indicated that the significant increase of adhesion by introducing nitrocellulose is ascribed to the combination of hydrogen bonding between the nitro groups and the hydroxyl groups at the solid/liquid interfaces and the disruption of the densely packed hydrophobic 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PTES) molecule. A mechanism has been proposed to explain the formation of superhydrophobic TiO2 films with distinct adhesion.     

Wettability conversion on the liquid flame spray generated superhydrophobic TiO2 nanoparticle coating on paper and board by photocatalytic decomposition of spontaneously accumulated carbonaceous overlayer

Titanium dioxide (TiO₂) is a photoactive material with various interesting and useful properties. One of those is the perfect wettability of TiO₂ surface after ultraviolet (UV) illumination. Wettability of a solid surface plays an important role in the field of printing, coating, and adhesion among others. Here we report on a superhydrophobic and photoactive liquid flame spray (LFS) generated TiO₂ nanoparticle coating that can be applied on web-like materials such as paper and board in one-step roll-to-roll process. The LFS TiO₂ nanoparticle coated paper and board were superhydrophobic instantly after the coating procedure because of spontaneously accumulated carbonaceous overlayer on TiO₂, and thus there was no need for any type of separate hydrophobization treatment. The highly photoactive LFS TiO₂ nanoparticle coating could be converted steplessly from superhydrophobic to superhydrophilic by UV-illumination, and the coating gave strong response to natural daylight illumination even in the shade. The superhydrophobic LFS TiO₂ coated surface can be used as an intelligent substrate, where photo-generated hydrophilic patterns guide the fluid setting and figure formation. Our study reveals that the wettability changes on the LFS TiO₂ surface were primarily caused by the photocatalytic removal of the carbonaceous material from TiO₂ during the UV-illumination and spontaneous accumulation of the carbonaceous material on the surface of the metal oxide during storage in the dark. The latter mechanism was found to be a temperature activated process which could be significantly speeded up by heat treatment. If other mechanisms such as surface oxidization, increment of hydroxyl groups, or charge separation played a role in the wetting phenomena on TiO₂, their effect was rather secondary as the removal and accumulation of the carbonaceous material dominated the wettability changes on the surface. Our study gives valuable information on the complex issue of photo-induced wettability changes on TiO₂.