A multiplex SNP genotyping by allele‐specificspecific PCR based on stem‐loop and universal fluorescent primers of Chr1daxin mice

Single nucleotide polymorphisms (SNPs) are one of the most common markers in mammals. Rapid, accurate, and multiplex typing of SNPs is critical for subsequent biological and genetic research. In this study, we have developed a novel method for multiplex genotyping SNPs in mice. The method involves allele‐specific PCR amplification of genomic DNA with two stem‐loop primers accompanied by two different universal fluorescent primers. Blue and green fluorescent signals were conveniently detected on a DNA sequencer. We verified four SNPs of 65 mice based on the novel method, and it is well suited for multiplex genotyping as it requires only one reaction per sample in a single tube with multiplex PCR. The use of universal fluorescent primers greatly reduces the cost of designing different fluorescent probes for each SNP. Therefore, this method can be applied to many biological and genetic studies, such as multiple candidate gene testing, genome‐wide association study, pharmacogenetics, and medical diagnostics.     

Single-Base Extension and ELISA-Based Approach for Single-Nucleotide Polymorphisms Genotyping

Single-nucleotide polymorphisms (SNPs) emerge as a fundamental tool in personalized medicine due to their association with drug responses or disease predisposition. Single-base extension (SBE) is a common method for characterizing known SNPs, but involves complicated procedures or requires costly analytical instruments. Here, we describe a novel SNP genotyping based on SBE and enzyme-linked immunosorbent assay (ELISA). During the SBE, the 5′ end fluorescein isothiocyanate-labeled allele-specific primer will extend with biotinylated dideoxynucleotides which are complementary to the SNP sites. The extension product will then be captured by streptavidin-coated nanoparticle and develop blue color in the ELISA assay. We validated this method by detecting SNPs for TP53 gene codon 273 from 68 individuals and the data were 100% in concordant with DNA sequencing. Thus, SBE and ELISA-based SNPs assay is a simple and accurate method for SNP genotyping.     

一种基于磁性纳米粒子PCR的高通量SNP分型方法

利用磁性纳米粒子PCR扩增(MNPs-PCR)和等位基因特异性双色荧光探针(Cy3, Cy5)杂交, 建立了一种单核苷酸多态性(SNP)分型的新方法. 应用该方法对9个样本MTHFR基因的C677T多态进行检测, 野生和突变型样本正错配信号比大于9.0, 杂合型正错配信号比接近1.0, 分型结果经测序验证. 此方法无须产物纯化、浓缩, 扫描分型结果快速、直观, 是一种操作简单、快速、高通量、高灵敏度的分型方法.     

Simultaneous detection of single nucleotide polymorphisms and copy number variations in the CYP2D6 gene by multiplex polymerase chain reaction combined with capillary electrophoresis

CYP2D6 (cytochrome P450 2D6) is one of the most important enzymes involved in drug metabolism, and CYP2D6 gene variants may cause toxic effects of therapeutic drugs or treatment failure. In this research, a rapid and simple method for genotyping the most common mutant alleles in the Asian population (CYP2D6*1/*1, CYP2D6*1/*10, CYP2D6*10/*10, CYP2D6*1/*5, CYP2D6*5/*10, and CYP2D6*5/*5) was developed by allele-specific polymerase chain reaction (AS-PCR) combined with capillary electrophoresis (CE). We designed a second mismatch nucleotide next to the single nucleotide polymorphism (SNP) site in allele-specific primers to increase the difference in PCR amplification. Besides, we established simulation equations to predict the CYP2D6 genotypes by analyzing the DNA patterns in the CE chromatograms. The multiplex PCR combined with CE method was applied to test 50 patients, and all of the test results were compared with the DNA sequencing method, long-PCR method and real-time PCR method. The correlation of the analytical results between the proposed method and other methods were higher than 90%, and the proposed method is superior to other methods for being able to simultaneous detection of SNPs and copy number variations (CNV). Furthermore, we compared the plasma concentration of aripiprazole (a CYP2D6 substrate) and its major metabolites with the genotype of 25 patients. The results demonstrate the proposed genotyping method is effective for estimating the activity of the CYP2D6 enzyme and shows potential for application in personalized medicine. Similar approach can be applied to simultaneous detection of SNPs and CNVs of other genes.     

Integrated platform for detection of DNA sequence variants using capillary array electrophoresis

We have developed a highly versatile platform that performs temperature gradient capillary electrophoresis (TGCE) for mutation/single-nucleotide polymorphism (SNP) detection, sequencing and mutation/SNP genotyping for identification of sequence variants on an automated 24-, 96- or 192-capillary array instrument. In the first mode, multiple DNA samples consisting of homoduplexes and heteroduplexes are separated by CE, during which a temperature gradient is applied that covers all possible temperatures of 50% melting equilibrium (Tms) for the samples. The differences in Tms result in separation of homoduplexes from heteroduplexes, thereby identifying the presence of DNA variants. The sequencing mode is then used to determine the exact location of the mutation/SNPs in the DNA variants. The first two modes allow the rapid identification of variants from the screening of a large number of samples. Only the variants need to be sequenced. The third mode utilizes multiplexed single-base extensions (SBEs) to survey mutations and SNPs at the known sites of DNA sequence. The TGCE approach combined with sequencing and SBE is fast and cost-effective for high-throughput mutation/SNP detection.     

A multiplex single nucleotide polymorphism genotyping method using ligase‐based mismatch discrimination and CE‐SSCP

Accuracy, simplicity, and cost‐effectiveness are the most important criteria for a genotyping method for SNPs compatible with clinical use. One method developed for SNP genotyping, ligase‐based discrimination, is considered the simplest for clinical diagnosis. However, multiplex assays using this method are limited by the detection method. Although CE has been introduced as an alternative to error prone microarray‐based detection, the design process and multiplex assay procedure are complicated because of the DNA size‐dependent separation principle. In this study, we developed a simple and accurate multiplex genotyping method using reaction condition‐optimized ligation and high‐resolution CE‐based SSCP. With this high‐resolution CE‐SSCP system, we are able to use similar‐sized probes, thereby eliminating the complex probe design step and simplifying the optimization process. We found that this method could accurately discriminate single‐base mismatches in SNPs of the tp53 gene, used as targets for multiplex detection.     

Highly multiplex and sensitive SNP genotyping method using a three‐color fluorescence‐labeled ligase detection reaction coupled with conformation‐sensitive CE

For the development of clinically useful genotyping methods for SNPs, accuracy, simplicity, sensitivity, and cost‐effectiveness are the most important criteria. Among the methods currently being developed for SNP genotyping technology, the ligation‐dependent method is considered the simplest for clinical diagnosis. However, sensitivity is not guaranteed by the ligation reaction alone, and analysis of multiple targets is limited by the detection method. Although CE is an attractive alternative to error‐prone hybridization‐based detection, the multiplex assay process is complicated because of the size‐based DNA separation principle. In this study, we employed the ligase detection reaction coupled with high‐resolution CE‐SSCP to develop an accurate, sensitive, and simple multiplex genotyping method. Ligase detection reaction could amplify ligated products through recurrence of denaturation and ligation reaction, and SSCP could separate these products according to each different structure conformation without size variation. Thus, simple and sensitive SNP analysis can be performed using this method involving the use of similar‐sized probes, without complex probe design steps. We found that this method could not only accurately discriminate base mismatches but also quantitatively detect 37 SNPs of the tp53 gene, which are used as targets in multiplex analysis, using three‐color fluorescence‐labeled probes.     

A novel technique for detecting single nucleotide polymorphisms by analyzing consumed allele-specific primers

We present a simple and rapid polymerase chain reaction (PCR)-based technique, termed consumed allele-specific primer analysis (CASPA), as a new strategy for single nucleotide polymorphism (SNP) analysis. The method involves the use of labeled allele-specific primers, differing in length, with several noncomplementary nucleotides added in the 5'-terminal region. After PCR amplification, the amounts of the remaining primers not incorporated into the PCR products are determined. Thus, nucleotide substitutions are identified by measuring the consumption of primers. In this study, the CASPA method was successfully applied to ABO genotyping. In the present method, the allele-specific primer only anneals with the target polymorphic site on the DNA, so it is not necessary to analyze the PCR products. Therefore, this method is only little affected by modification of the PCR products. The CASPA method is expected to be a useful tool for typing of SNPs.     

Fluorescence polarization for single nucleotide polymorphism genotyping

Single nucleotide polymorphisms (SNPs) are the most abundant variations in the human genome and have become the primary markers for genetic studies for mapping and identifying susceptible genes for complex diseases. Methods that genotype SNPs quickly and economically are of high values for these studies because they require a large amount of genotyping. Fluorescence polarization (FP) is a robust technique that can detect products without separation and purification and it has been applied for SNP genotyping. In this article the applications of FP in SNP genotyping are reviewed and one of the methods, the FP-TDI assay, is discussed in details. It is hoped that readers could get useful information for the applications of FP in SNP genotyping and some insights of the FP-TDI assay.     

Nucleic acid and SNP detection via template‐directed native chemical ligation and inductively coupled plasma mass spectrometry

Detection of nucleic acids and single nucleotide polymorphisms (SNPs) is of pivotal importance in biology and medicine. Given that the biological effect of SNPs often is enhanced in combination with other SNPs, multiplexed SNP detection is desirable. We show proof of concept of the multiplexed detection of SNPs based on the template‐directed native chemical ligation (NCL) of PNA‐probes carrying a metal tag allowing detection using ICP‐MS. For the detection of ssDNA oligonucleotides (30 bases), two probes, one carrying the metal tag and a second one carrying biotin for purification, are covalently ligated. The methodological limit of detection is of 29 pM with RSD of 6.7% at 50 pM (n = 5). Detection of SNPs is performed with the combination of two sets of reporter probes. The first probe set targets the SNP, and its yield is compared with a second set of probes targeting a neighboring sequence. The assay was used to simultaneously differentiate between alleles of three SNPs at 5‐nM concentration.     

A standard protocol for single nucleotide primer extension in the human genome using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Analysis of single nucleotide polymorphisms (SNPs) has become an increasingly important area of research, with numerous applications in medical genetics, population genetics, forensic science, and agricultural biotechnology. Large-scale SNP analyses require the development of methodologies that are economical, flexible, accurate and capable of automation. Primer extension in conjunction with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) is currently emerging as a potential method for high-throughput SNP genotyping. We have evaluated a number of published primer extension methods and refined a simple and robust protocol to analyze human autosomal disease-causing mutations and population genetic markers on the Y-chromosome. Twelve different variant sites were examined, and homozygotes, heterozygotes and hemizygotes were accurately typed. A 100% concordance was observed between SNP genotypes obtained using the MALDI-TOFMS technique and alternative genotyping methods, such as restriction fragment length polymorphism (RFLP) assays and denaturing high-performance liquid chromatography (DHPLC). Since multiple polymorphisms can be detected in single reactions, the method provides a cost-effective approach for SNP analysis. The protocol is also extremely flexible (able to accommodate new markers) and can be adapted to a number of platforms without the use of commercial kits.     

Parallel optimization and genotyping of multiple single-nucleotide polymorphism markers by sample pooling approach using cycling-gradient CE with multiple injections

Increasing importance of single-nucleotide polymorphisms (SNPs) in determination of disease susceptibility or in prediction of therapy response brings attention of many molecular diagnostic laboratories to simple and low-cost SNP genotyping methodologies. We have recently introduced a mutation detection technique based on analysis of homo- and heteroduplex PCR fragments resolved in cycling temperature gradient conditions on a conventional multicapillary-array DNA sequencer. The main advantage of this technique is in its simplicity with no requirement for sample cleanup prior to the analysis. In this report we present a practical application of the technology for genotyping of SNP markers in two separate clinical projects resulting in a combined set of 44 markers screened in over 500 patients. Initially, a design of PCR primers and conditions was performed for each SNP marker. Then, optimization of CE running conditions (limited just to the proper selection of temperature cycling) was performed on pools of 20 DNA samples to increase the probability of having each of the two allele types represented in the sample. After selecting the optimum conditions, screening of markers in patients was performed using a multiple-injection approach for further acceleration of the sample throughput. The rate of successful optimization of experimental conditions without any pre-selection based on the SNP sequence or melting characteristics was 80% from the initial SNP marker candidates. By studying the failed markers, we attempt to identify critical factors enabling successful typing. The presented technique is very useful for low to medium sized SNP genotyping projects mostly applied in pharmacogenomic research as well as in clinical diagnostics. The main advantages include low cost, simple setup and validation of SNP markers.     

连接反应介导的等位基因特异性扩增-微流控芯片电泳法同时检测多个SNP位点

以CYP2D6基因中的6个SNP位点为测定对象, 开展多个SNP位点同时测定的方法学研究.     

A new multiplex for human identification using insertion/deletion polymorphisms

Human identification is usually based on the study of STRs or SNPs depending on the particular characteristics of the investigation. However, other types of genetic variation such as insertion/deletion polymorphisms (indels) have considerable potential in the field of identification, since they can combine the desirable characteristics of both STRs and SNPs. In this study, a set of 38 non‐coding bi‐allelic autosomal indels reported to be polymorphic in African, European, and Asian populations were selected. We developed a sensitive genotyping assay, which is able to characterize all 38 bi‐allelic markers using a single multiplex PCR and detected with standard CE analyzers. Amplicon length was designed to be shorter than 160 bp. Complete profiles were obtained using 0.3 ng of DNA, and full genotyping of degraded samples was possible in cases where standard STR typing had partially failed. A total of 306 individuals from Angola, Mozambique, Portugal, Macau, and Taiwan were studied and population data are presented. All indels were polymorphic in the three population groups studied and the random match probabilities of the set ranged in orders of magnitude from 10^?14 to 10^?15. Therefore, the indel‐plex represents a valuable approach in human identification studies, especially in challenging DNA cases, as a more straightforward and efficient alternative to SNP typing.     

Single nucleotide polymorphism analysis by allele-specific primer extension with real-time bioluminescence detection in a microfluidic device

A microfluidic approach for rapid bioluminescent real-time detection of single nucleotide polymorphism (SNP) is presented. The method is based on single-step primer extension using pyrosequencing chemistry to monitor nucleotide incorporations in real-time. The method takes advantage of the fact that the reaction kinetics differ between matched and mismatched primer-template configurations. We show here that monitoring the initial reaction in real time accurately scores SNPs by comparing the initial reaction kinetics between matched and mismatched configurations. Thus, no additional treatment is required to improve the sequence specificity of the extension, which has been the case for many allele-specific extension assays. The microfluidic approach was evaluated using four SNPs. Three of the SNPs included primer-template configurations that have been previously reported to be difficult to resolve by allele-specific primer extension. All SNPs investigated were successfully scored. Using the microfluidic device, the volume for the bioluminescent assay was reduced dramatically, thus offering a cost-effective and fast SNP analysis method.     

Multiple genotyping based on multiplex PCR and microarray

The genetic variability has obtained more and more attention in the process of diagnosis and treatment of tumors.Herein,we have described a multiple genotyping method based on magnetic enrichmentmultiplex PCR (MEM-PCR) and microarray technology.Monodisperse magnetic beads were fabricated and modified with streptavidin.Four loci on two genes (M235T and A-6G loci on AGT gene,A1298C and C677T loci on MTHFR gene) were selected to study single nucleotide polymorphisms (SNP).Target sequences of these SNP loci were amplified using Cy3-labeled primers through multiplex PCR in one tube after the templates were enriched and purified by functional magnetic beads (MB).Four pairs of NH₂-labeled probes,corresponding to each locus,were fixed on CHO-modified glass slide by covalent binding.Hybridization between target sequences and probes was performed under suitable conditions.The spotting locations on microarray and the ratio of fluorescence intensity,produced by different loci,were used to distinguish the SNP genotypes.Finally,three of gastric cancer samples were collected and genotyping analysis for these four SNP loci was carried out successfully simultaneously by this method.     

Detection of single nucleotide polymorphisms using electrospray ionization mass spectrometry: validation of a one-well assay and quantitative pooling studies

Single nucleotide polymorphisms (SNPs) are currently being mapped and databased at a remarkable pace, providing a viable means for understanding disease susceptibility, differential drug response and human evolution. Consequently, there is an increasing demand for SNP genotyping technologies that are simple, rapid, cost effective and readily amenable to automation for high-throughput analyses. In this study, we improved the Survivor Assay, a SNP detection method based on electrospray ionization mass spectrometry (ESI-MS), with several developments. One improvement is the development of a one-well assay, requiring no off-line purification of the polymerase chain reaction product, achieved by simple addition of reagent solution into a single well. Another is the on-line separation of magnesium and dideoxynucleotides using an in-house made monolithic metal chelating column, eliminating any off-line sample preparation prior to mass spectrometric analysis. Here the Survivor Assay is extended from a proof-of-principle concept to a validated method by genotyping six SNPs from five different regions of human genomic DNA in 55 individual samples with 100% accuracy. This improved Survivor Assay eliminates the tedious and time-consuming steps of sample preparation, minimizes sample handing and offers a high-throughput analysis of SNPs by ESI-MS. The current combined preparation and analysis time is 2 min per sample. The simplicity of this method has potential for full automation and parallel chromatography and, thus, reduced analysis time. In addition, we have adapted the Survivor Assay for quantitative SNP analysis in pooled DNA samples. The capabilities and sensitivity of this approach were evaluated. We demonstrate that an allele occurring at a frequency of 2% can consistently be quantitated.     

An allelic ladder based upon reference alleles for mtDNA SNP analysis using the SNaPshot technique

The analysis of mitochondrial DNA (mtDNA) single-nucleotide polymorphisms (SNPs) using the SNaPshot technique (Applied Biosystems) is a fast and sensitive method for the reliable identification of disease-associated mtDNA SNPs, genetic ancestry mtDNA SNPs and forensically important mtDNA SNPs. The detection of many SNPs in one multiplex PCR and one subsequent multiplex minisequencing reaction is challenging for laboratories who want to establish this technique, due to the problem that there is no allelic ladder available for mtDNA SNP analysis via SNaPshot technique. Normally, the laboratory has to invent long-term testing and studies. The interpretation of false and correct alleles is up to some specialists knowing the expected and the estimated size of each allele SNP. We here present a protocol to assemble up to 84 alleles of 42 different mtDNA SNPs in an allelic ladder that is based upon reference alleles. We recommend using allelic ladders/reference alleles for SNP analysis to maintain high-quality analysis standards.     

Rapid genotyping of factor V Leiden mutation using single-tube bidirectional allele-specific amplification and automated ultrathin-layer agarose gel electrophoresis

We report a novel, high-throughput genotyping method by single nucleotide polymorphism (SNP) analysis using bidirectional allele-specific amplification with polymerase chain reaction (PCR) in a single-step/single-tube format. Blood coagulation factor V G1691A (also referred to as Leiden) mutation was chosen as a model system for SNP detection, as this is one of the most common inherited risk factors of thrombosis, effecting 2-5% of the human population. The rationale of our method is the production of allele-specific PCR fragments, different in size, which was achieved by bidirectional amplification, starting from the position of the mutation. Thus, both homozygosity and heterozygosity were readily identified from a single reaction by simply determining the sizes of the resulting PCR products. The advantage of our assay, compared to other single-tube systems, is that this method did not require the use of pre-PCR labeled (fluorophore) primers or probes. Preferential production of the allele-specific products was achieved by a hot-start, time release PCR system. Specificity was increased by introducing a mismatch in the 3'-antepenultimate position of the allele-specific primers. This method made possible the large-scale screening for the factor V Leiden mutation using single-tube PCR followed by automated ultrathin-layer agarose gel electrophoresis, with real-time detection of the "in migratio" ethidium-bromide-labeled fragments.     

PCR-free MDR1 polymorphism identification by gold nanoparticle probes

Single nucleotide polymorphisms (SNPs) represent the most abundant source of genetic variation in the human genome, and they can be linked to genetic susceptibilities or varied pharmaceutical responses. Established SNP detection techniques are mainly PCR-based, which means that they involve complex, labor-intensive procedures, are easy contaminated, and can give false-positive results. Therefore, we have developed a simple and rapid MS-based disulfide barcode methodology that relies on magnifying the signal from a dual-modified gold nanoparticle. This approach permits direct SNP genotyping of total human genomic DNA without the need for primer-mediated enzymatic amplification. Disulfides that are attached to the gold nanoparticle serve as a “barcode” that allows different sequences to be discerned using MS detection. Specificity is based on two sequential oligonucleotide hybridizations, which include two steps: the first is the capture of the target by gene-specific probes immobilized onto magnetic beads; the second is the recognition of gold nanoparticles functionalized with allele-specific oligonucleotides. The sensitivity of this new method reaches down to the 0.1 fM range, thus approaching that of PCR. The feasability of this SNP identification methodology based on an MS-based disulfide barcode assay was demonstrated by applying it to genomic DNA samples representing all possible genotypes of the SNPs G2677T and C3435T in the human MDR1 gene. Due to its great advantage—the ability to perform SNP typing without the use of PCR—the assay was found to be simple, rapid and robust, and so may be highly suited to routine clinical detection as well as basic medical research.