An unusual ligand in copper chemistry: coordination oligomers and polymers containing the [[CpMo(CO)2]2(mu,eta2-Sb2)] cluster

The coordination behavior of [[CpMo(CO)(2)}(2)(mu,eta(2)-Sb(2))] (1; Cp = cyclopentadiene) toward Cu(I) was investigated. Its reaction with CuX (X = Br, Cl, and I) produced oligomers or polymers of the general formula [[CpMo(CO)(2)](2)(mu,eta(2)-Sb(2))(mu-CuX)](n). While 2 (X = Cl, n = 2) and 3 (X = Br, n = 2) proved to be halogen-bridged dimers in both solution and solid state, the molecules of 4 (X = I, n = infinity) self-assembled in the crystal forming a linear polymer with a Cu-I skeleton supported by Sb-Cu bonds. The reaction of 1 with Cu[GaCl(4)] resulted in the formation of the ionic complex [[CpMo(CO)(2)](2)(mu,eta(2)-Sb(2))](4)Cu(2)[GaCl(4)](2) (5). Its dication contains four [[CpMo(CO)(2)](2)(mu,eta(2)-Sb(2))] ligands arranged around a Cu-Cu dumbbell. All new compounds were characterized using IR, electrospray ionization mass spectrometry, (1)H NMR, elemental analysis, and single-crystal X-ray diffraction. The ligand was oxidized by both silver(I) and copper(II), and a cyclovoltammetric study revealed that 1 suffered irreversible reduction and oxidation in a dichloromethane solution at -2.04 and 0.10 V, respectively, versus ferrocene.     

2-Benzoylpyridine thiosemicarbazone as a novel reagent for the single pot synthesis of dinuclear Cu(I)-Cu(II) complexes: formation of stable copper(II)-iodide bonds

2-Benzoylpyridine thiosemicarbazone {R(1)R(2)C(2)=N(2)·N(3)H-C(1)(=S)-N(4)H(2), R(1) = py-N(1), R(2) = Ph; Hbpytsc} with copper(I) iodide in acetonitrile-dichloromethane mixture has formed stable Cu(II)-I bonds in a dark green Cu(II) iodo-bridged dimer, [Cu(2)(II)(μ-I)(2)(η(3)-N(1),N(2),S-bpytsc)(2)] 1. Copper(I) bromide also formed similar Cu(II)-Br bonds in a dark green Cu(II) bromo-bridged dimer, [Cu(2)(II)(μ-Br)(2)(η(3)-N(1),N(2),S-bpytsc)(2)] 3. The formation of dimers 1 and 3 appears to be due to a proton coupled electron transfer (PCET) process wherein copper(I) loses an electron to form copper(II), and this is accompanied by a loss of -N(3)H proton of Hbpytsc ligand resulting in the formation of anionic bpytsc(-). When copper(I) iodide was reacted with triphenylphosphine (PPh(3)) in acetonitrile followed by the addition of 2-benzoylpyridine thiosemicarbazone in dichloromethane (Cu?:?PPh(3)?:?Hbpytsc in the molar ratio 1:1:1), both Cu(II) dimer 1 and an orange Cu(I) sulfur-bridged dimer, [Cu(2)(I)I(2)(μ-S-Hbpytsc)(2)(PPh(3))(2)] 2 were formed. Copper(I) bromide with PPh(3) and Hbpytsc also formed Cu(II) dimer 3 and an orange Cu(I) sulfur-bridged dimer, [Cu(2)(I)Br(2)(μ-S-Hbpytsc)(2)(PPh(3))(2)] 4. While complexes 2 and 4 exist as sulfur-bridged Cu(I) dimers, 1 and 3 are halogen-bridged. The central Cu(2)S(2) cores of 2 and 4 as well as Cu(2)X(2) of 1 (X = I) and 3 (X = Br) are parallelograms. One set of Cu(II)-I and Cu(II)-Br bonds are short, while the second set is very long {1, Cu-I, 2.565(1), 3.313(1) ?; 3, Cu-Br, 2.391(1), 3.111(1) ?}. The Cu···Cu separations are long in all four complexes {1, 4.126(1); 2, 3.857(1); 3, 3.227(1); 4, 3.285(1) ?}, more than twice the van der Waals radius of a Cu atom, 2.80 ?. The pyridyl group appears to be necessary for stabilizing the Cu(II)-I bond, as this group can accept π-electrons from the metal.     

Triangular,ferromagnetically-coupled CuII 3-pyrazolato complexes as possible models of particulate methane monooxygenase (pMMO)

Magnetic susceptibility and EPR studies show that trinuclear Cu(II)-pyrazolato complexes with a Cu(3)(mu3-X)2 core (X = Cl, Br) are ferromagnetically coupled: J(Cu-Cu) = +28.6 cm(-1) (X = Cl), +3.1 cm(-1) (X = Br). The orderly transition from an antiferromagnetic to a ferromagnetic exchange among the Cu centers of Cu(3)(mu3-X) complexes, X = O, OH, Cl, Br, follows the change of the Cu-X-Cu angle from 120 degrees to approximately 80 degrees. The crystal structures of [Bu4N]2"[Cu3(mu3-Br)2(mu-pz*)3Br3] (pz* = pz (1a) or 4-O2N-pz (1b), pz = pyrazolato anion, C(3)H(3)N(2)(1-)) are presented.     

Synthesis,spectroscopy and structures of halogen and sulfur-bridged dinuclear silver(I) complexes with N1-substituted thiophene-2-carbaldehyde thiosemicarbazone

The reactions of silver(I) halides (Cl or Br) with thiophene-2-carbaldehyde N¹-methyl thiosemicarbazone (HttscMe) in the presence of Ph₃P (1:1:1 molar ratio) yield halogen-bridged dimers, [Ag₂(μ-X)₂(η¹-S-HttsMe)₂(PPh₃)₂] (X = Cl, 1; Br, 2). The use of 2,2′-bipyridine in lieu of Ph₃P in the reaction of silver(I) chloride with HttscMe yields the sulfur-bridged dimer, [Ag₂(μ-S-HttscMe)₂(η¹-HttsMe)₂] · 2CHCl₃ 3. The substituents have altered the nature of bridge between the two silver atoms. The Ag···Ag separation (3.4867(5) Å) in complex 3 is less than that in the halogen-bridged dimers (3.734(4) Å 1; 3.746(5) Å 2). Unlike PPh₃ the co-ligand 2,2′-bipyridine did not coordinate to the silver center, but was necessary for crystallization in the reaction with the thio-ligand. NMR spectroscopy revealed that the complexes remained unchanged in the solution state (CDCl₃).     

One-dimensional polymers based on [{CpMo(CO)2}2(mu,eta2-P2)]: solid-state conformation analysis by NMR spectroscopy and DFT calculations

Reaction of the complex [{CpMo(CO)2}2(mu,eta2-P2)] (1) with CuI halides leads to the quantitative formation of the novel one-dimensional linear polymers [CuX{Cp2Mo2(CO)4(mu,eta2:eta1:eta1-P2)}](infinity) (X=Cl (4), Br (5), I (6)). The same products 4 and 5 were obtained when 1 was treated with CuCl2 and CuBr2, respectively. The solid-state structures are compared and their remarkable influence on the respective (31)P magic angle spinning (MAS) NMR spectra is interpreted with the help of density functional theory (DFT) calculations on the model compounds [{(CuX)2{Cp2Cr2(CO)4(mu,eta(2):eta1:eta1-P2)}2}3] (X=Cl (4 a), Br (5 a)) in which the molybdenum atoms are replaced by their lighter homologue chromium.     

Cube-type nitrido complexes containing titanium and zinc/copper

Several azaheterometallocubane complexes containing [MTi3N4] cores have been prepared by the reaction of [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)] (1) with zinc(II) and copper(I) derivatives. The treatment of 1 with zinc dichloride in toluene at room temperature produces the adduct [Cl2Zn{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (2). Attempts to crystallize 2 in dichloromethane gave yellow crystals of the ammonia adduct [(H3N)Cl2Zn{(mu3-NH)Ti3(eta5-C5Me5)3(mu-NH)2(mu3-N)}] (3). The analogous reaction of 1 with alkyl, (trimethylsilyl)cyclopentadienyl, or amido zinc complexes [ZnR2] leads to the cube-type derivatives [RZn{(mu3-N)(mu3-NH)2Ti3(eta5-C5Me5)3(mu3-N)}] (R = CH2SiMe3 (5), CH2Ph (6), Me (7), C5H4SiMe3 (8), N(SiMe3)2 (9)) via RH elimination. The amido complex 9 decomposes in the presence of ambient light to generate the alkyl derivative [{Me3Si(H)N(Me)2SiCH2}Zn{(mu3-N)(mu3-NH)2Ti3(eta5-C5Me5)3(mu3-N)}] (10). The chloride complex 2 reacts with lithium cyclopentadienyl or lithium indenyl reagents to give the cyclopentadienyl or indenyl zinc derivatives [RZn{(mu3-N)(mu3-NH)2Ti3(eta5-C5Me5)3(mu3-N)}] (R = C5H5 (11), C9H7 (12)). Treatment of 1 with copper(I) halides in toluene at room temperature leads to the adducts [XCu{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (X = Cl (13), I (14)). Complex 13 reacts with lithium bis(trimethylsilyl)amido in toluene to give the precipitation of [{Cu(mu4-N)(mu3-NH)2Ti3(eta5-C5Me5)3(mu3-N)}2] (15). Complex 15 is prepared in a higher yield through the reaction of 1 with [{CuN(SiMe3)2}4] in toluene at 150 degrees C. The addition of triphenylphosphane to 15 in toluene produces the single-cube compound [(Ph3P)Cu{(mu3-N)(mu3-NH)2Ti3(eta5-C5Me5)3(mu3-N)}] (16). The X-ray crystal structures of 3, 8, 9, and 15 have been determined.     

Complexation of the triply-bonded dirhenium(II) complex Re(2)Cl(4)(mu-dppm)(2) (dppm = Ph(2)PCH(2)PPh(2)) by up to three acetylene molecules

The triply bonded dirhenium(II) synthons Re(2)X(4)(mu-dppm)(2) (X = Cl, Br; dppm = Ph(2)PCH(2)PPh(2)) react with acetylene at room temperature in CH(2)Cl(2) and acetone to afford the bis(acetylene) complexes Re(2)X(4)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(eta(2)-HCCH) (X = Cl (3), Br(4)). Compound 3 has been derivatized by reaction with RNC ligands in the presence of TlPF(6) to give unsymmetrical complexes of the type [Re(2)Cl(3)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(eta(2)-HCCH)(CNR)]PF(6) (R = Xyl (5), Mes (6), t-Bu (7)), in which the RCN ligand has displaced the chloride ligand cis to the eta(2)-HCCH ligand. The reaction of 3 with an additional 1 equiv of acetylene in the presence of TlPF(6) gives the symmetrical all-cis isomer of [Re(2)Cl(3)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(eta(2)-HCCH)(2)]PF(6) (8). The two terminal eta(2)-HCCH ligands in 8 are very labile and can be displaced by CO and XylNC to give the complexes [Re(2)Cl(3)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(L)(2)]Y (L = CO when Y = PF(6) (9); L = CO when Y = (PF(6))(0.5)/(H(2)PO(4))(0.5) (10); L = XylNC when Y = PF(6) (11)). These substitution reactions proceed with retention of the all-cis stereochemistry. Single-crystal X-ray structure determinations have been carried out on complexes 3, 5, 8, 10, and 11. In no instance have we found that the acetylene ligands undergo reductive coupling reactions.     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Ruthenium(II) and ruthenium(IV) complexes containing kappa1-P-, kappa2-P,O-, and kappa3-P,N,O-iminophosphorane-phosphine ligands Ph2PCH2P[=NP(=O)(OR)2]Ph2 (R = Et,Ph): synthesis,reactivity, theoretical studies,and catalytic activity in transfer hydrogenation of cyclohexanone

[(Ru(eta(6)-p-cymene)(mu-Cl)Cl)(2)] and [(Ru(eta(3):eta(3)-C(10)H(16))(mu-Cl)Cl)(2)] react with Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2) (R = Et (1a), Ph (1b)) affording complexes [Ru(eta(6)-p-cymene)Cl(2)(kappa(1)-P-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))] (R = Et (2a), Ph (2b)) and [Ru(eta(3):eta(3)-C(10)H(16))Cl(2)(kappa(1)-P-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))] (R = Et (6a), Ph (6b)). While treatment of 2a with 1 equiv of AgSbF(6) yields a mixture of [Ru(eta(6)-p-cymene)Cl(kappa(2)-P,O-Ph(2)PCH(2)P[=NP(=O)(OEt)(2)]Ph(2))][SbF(6)] (3a) and [Ru(eta(6)-p-cymene)Cl(kappa(2)-P,N-Ph(2)PCH(2)P[=NP(=O)(OEt)(2)]Ph(2))][SbF(6)] (4a), [Ru(eta(6)-p-cymene)Cl(kappa(2)-P,O-Ph(2)PCH(2)P[=NP(=O)(OPh)(2)]Ph(2))][SbF(6)] (3b) and [Ru(eta(3):eta(3)-C(10)H(16))Cl(kappa(2)-P,O-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))][SbF(6)] (R = Et (7a), Ph (7b)) are selectively formed from 2b and 6a,b. Complexes [Ru(eta(6)-p-cymene)(kappa(3)-P,N,O-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))][SbF(6)](2) (R = Et (5a), Ph (5b)) and [Ru(eta(3):eta(3)-C(10)H(16))(kappa(3)-P,N,O-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))][SbF(6)](2) (R = Et (8a), Ph (8b)) have been prepared using 2 equiv of AgSbF(6). The reactivity of 3-5a,b has been explored allowing the synthesis of [Ru(eta(6)-p-cymene)X(2)(kappa(1)-P-Ph(2)PCH(2)P[=NP(=O)(OR)(2)]Ph(2))] (R = Et, Ph; X = Br, I, N(3), NCO (9-12a,b)). The catalytic activity of 2-8a,b in transfer hydrogenation of cyclohexanone, as well as theoretical calculations on the models [Ru(eta(6)-C(6)H(6))Cl(kappa(2)-P,N-H(2)PCH(2)P[=NP(=O)(OH)(2)]H(2))]+ and [Ru(eta(6)-C(6)H(6))Cl(kappa(2)-P,O-H(2)PCH(2)P[=NP(=O)(OH)(2)]H(2))]+, has been also studied.     

Synthetic and theoretical study of the incorporation of metal halides in [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)

The capacity of the imido-nitrido organometallic ligand [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)] (1) to entrap main group metal halides MXn has been investigated. Treatment of 1 with metal halides in toluene or dichloromethane afforded several soluble adducts [MXn(L)] (L=1) in good yields. The reaction of 1 with one equivalent of Group 1 and 13 monohalides MX afforded single cube-type complexes [XM{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (M=Li, X=Br (2), I (3); M=Na, X=I (4); M=In, X=I (5); M=Tl, X=I (6)). Analogous treatment of 1 with Group 2 and 14 dihalides MX(2) gave the corresponding adducts [I2M{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (M=Mg (7), Ca (8), Sr (9)) and [Cl(2)M{(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}] (M=Sn (10), Pb (11)). The treatment of 1 with SnI2 or the reaction of 10 with MeI at 60 degrees C afforded two azametallocubane units linked by two bridging iodine atoms [{ISn(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)}2(mu-I)2] (12). Indium triiodide reacted with 1 in toluene to form the adduct [I3In(mu3-NH)3Ti3(eta5-C5Me5)3(mu3-N)] (13). Density functional theory calculations have been carried out to study these processes and evaluate the influence of the solvent. X-ray crystal structure determinations have been performed for complexes 10, 12, and 13.     

Di- and tetranuclear copper(I) complexes containing phenylaminobis(phosphonite), PhN{P(OC6H4OMe-o)2}2, and their reactivity toward bipyridyl ligands

The aminobis(phosphonite) PhN(P(OC6H4OMe-o)2)2 (PNP; 1) reacts with 2 equiv of CuI to give a binuclear complex, Cu2(mu2-I)2(NCCH3)2(mu-PNP) (2), whereas similar reactions with CuCl and CuBr furnish tetranuclear "ladder"-type complexes, Cu4(mu2-X)2(mu3-X)2(mu-PNP)2 (3, X = Cl; 4, X = Br), in excellent yield. The complex 2 when heated under vacuum turns into the tetranuclear complex 5 in a reversible fashion. Similarly, the complexes 3 and 4 on dissolution in CH3CN dissociate reversibly into the corresponding binuclear complexes from which the tetrameric complexes can be readily regenerated. Treatment of 2 with excess of pyridine produces the heterosubstituted derivative, Cu2(mu2-I)2(C5H5N)2(mu-PNP) (6). The interaction of 2 with 2,2'-bipyridine in 1:1 and 1:2 ratios produces the mono- and disubstituted derivatives, Cu2(mu2-I)I(C10H8N2)(mu-PNP) (7) and [Cu2(mu2-I)(C10H8N2)2(mu-PNP)]I (8), respectively. The chloro and bromo analogues of 7 are prepared by treating the tetranuclear derivatives 3 and 4 with 2,2'-bipyridine. Reaction of 2 with 4,4'-bipyridine in the presence of AgOTf gives the cationic complex [Cu4(NCCH3)4(C10H8N2)2(mu-PNP)2](OTf)4 (9), whereas the complex [Cu2(NCCH3)2(mu-PNP)2](OTf)2 (10) was obtained from the reaction of 2 with 1 equiv of 1 and AgOTf. The reactions of 3 and 4 with 2 equiv of 4,4'-bipyridine in acetonitrile afford one-dimensional copper(I) coordination polymers [Cu2(mu2-X)2(mu-PNP)(C10H8N2)]n (13, X = Cl; 14, X = Br). The molecular structures of 2-4, 6-8, 12, and 14 are confirmed by X-ray crystallography.     

Dinitrogen functionalization with terminal alkynes, amines, and hydrazines promoted by [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2): observation of side-on and end-on diazenido complexes in the reduction of N2 to hydrazine

Functionalization of the N2 ligand in the side-on bound dinitrogen complex, [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2), has been accomplished by addition of terminal alkynes to furnish acetylide zirconocene diazenido complexes, [(eta5-C5Me4H)2Zr(C[triple bond]CR)]2(mu2,eta2,eta2-N2H2) (R = nBu, tBu, Ph). Characterization of [(eta5-C5Me4H)2Zr(C[triple bond]CCMe3)]2(mu2,eta2,eta2-N2H2) by X-ray diffraction revealed a side-on bound diazenido ligand in the solid state, while variable-temperature 1H and 15N NMR studies established rapid interconversion between eta1,eta1 and eta2,eta2 hapticity of the [N2H2]2- ligand in solution. Synthesis of alkyl, halide, and triflato zirconocene diazenido complexes, [(eta5-C5Me4H)2ZrX]2(mu2,eta1,eta1-N2H2) (X = Cl, I, OTf, CH2Ph, CH2SiMe3), afforded eta1,eta1 coordination of the [N2H2]2- fragment both in the solid state and in solution, demonstrating that sterically demanding, in some cases pi-donating, ligands can overcome the electronically preferred side-on bonding mode. Unlike [(eta5-C5Me4H)2ZrH]2(mu2,eta2,eta2-N2H2), the acetylide and alkyl zirconocene diazenido complexes are thermally robust, resisting alpha-migration and N2 cleavage up to temperatures of 115 degrees C. Dinitrogen functionalization with [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) was also accomplished by addition of proton donors. Weak Br?nsted acids such as water and ethanol yield hydrazine and (eta5-C5Me4H)2Zr(OH)2 and (eta5-C5Me4H)2Zr(OEt)2, respectively. Treatment of [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) with HNMe2 or H2NNMe2 furnished amido or hydrazido zirconocene diazenido complexes that ultimately produce hydrazine upon protonation with ethanol. These results contrast previous observations with [(eta5-C5Me5)2Zr(eta1-N2)]2(mu2,eta1,eta1-N2) where loss of free dinitrogen is observed upon treatment with weak acids. These studies highlight the importance of cyclopentadienyl substituents on transformations involving coordinated dinitrogen.     

Helicates, boxes, and polymers from simple pyridine-alcohol ligands: the impact of the identity of the transition metal ion

The coordination chemistry of 6-methylpyridine-2-methanol (1) and enantiopure (R)-1-(6-methylpyridin-2-yl)ethanol (2) with a range of divalent first-row transition metal salts has been investigated in an effort to determine whether hydrogen-bonded helicates will form, as observed for cobalt(II) salts. Hydrogen-bonded helicates, [Cu2(1)2(1-H)2X2] (X = Cl, Br), were only observed upon combining 1 with CuCl2 and CuBr2 in MeOH solution. Other metal salts led to alternative products, viz. Cu(ClO4)2 in the presence of base gives [Cu2(1)2(1-H)2](ClO4)2, ZnCl2 and ZnBr2 give the 1-D helical coordination polymers [Zn(1-H)Cl]infinity and [Zn(1-H)Br]infinity, a mixture of NiCl2 and Ni(OAc)2 produces the [Ni4(1-H)4Cl2(OAc)2(MeOH)2] cubane, NiCl2 leads to the [Ni4(1-H)4Cl4(MeOH)4] cubane, while MnCl2 gives the known cubane [Mn4(1-H)6Cl4]. The reaction of 2 with CuCl2 produces the mononuclear complex Lambda-[Cu(2)2Cl]Cl, while reaction with CuBr2 leads to a dimer, Lambda,Lambda-[Cu2(2)3(2-H)Br2]Br, which is held together by a single hydrogen bond between the monomeric subunits. The solid-state CD spectra of these latter complexes were recorded and found to be very similar. The temperature-dependent magnetic behavior of [Cu2(1)2(1-H)2X2] (X = Cl, Br), [Cu2(1)2(1-H)2](ClO4)2, [Cu2(2)3(2-H)Br2]Br, and [Ni4(1-H)4Cl2(OAc)2(MeOH)2] was investigated. Weak antiferromagnetic coupling between the copper(II) centers is mediated by the hydrogen bonds in the [Cu2(1)2(1-H)2X2] (X = Cl, Br) complexes.     

Dichroic, dinuclear mu2-(eta2-NO)-nitrosoaniline-bridged complexes of rhenium of the type [[(CO)3Re(mu-X)]2ONC6H4NR2] (X = Cl, Br, I; R = Me, Et)

A series of unusual dinuclear mu2-(eta2-NO)-nitrosoaniline-bridged complexes [[(CO)3Re(mu-X)]2ONC6H4NR2] (X = Cl, Br, I; R = Me, Et) with dichroic properties have been synthesised by reaction of pentacarbonylhalogenorhenium(I) [(CO)5ReX] (X = Cl, Br, I) with the corresponding nitrosoaniline derivatives R2NC6H4NO (R = Me, Et). The deeply coloured solutions in CH2Cl2 show broad UV/Vis absorptions from 595 to 620 nm depending on the halogen bridges and N substituents. Single crystals of all six compounds exhibit a pronounced linear dichroism. The molecular structures have been determined by single-crystal X-ray analyses. All the compounds contain two face-shared octahedra, with two halogens and one NO ligand as bridges. The NO ligand coordinates in a nonsymmetrical eta2-like fashion with N or O coordination to each Re centre. Therefore, the C-nitroso group and the planar NC2 moiety of NR2 both lie almost exactly within the symmetry plane of the dinuclear complexes. These complexes belong to the novel and simple class of neutral dinuclear C-nitroso complexes that include the rare, non-assisted mu2-(eta2-NO) ligand function and have only single halogen atoms in bridging positions.     

Synthesis and characterization of rhenium-copper sulfide cluster complexes [(Ph3P)2N][Re3(CuX)(mu3-S)4Cl6(PMe2Ph)3] (X = Cl, Br, I)

The reaction of a trinuclear rhenium sulfide cluster compound Re3S7Cl7 with dimethylphenylphosphine and CuX2 (X = Cl or Br) or CuX (X = Cl, Br, or I) formed tetranuclear cluster complexes [(Ph3P)2N][Re3(CuX)(mu3-S)4Cl6(PMe2Ph)3] (X = Cl, Br, or I). Their solutions have the characteristic intense blue color with visible spectral bands near 600 nm. Single-crystal X-ray structures show that three mu-S atoms in the intermediate trinuclear rhenium complex coordinate to a copper atom, forming elongated tetrahedral structures in which Re-Cu bonding interaction is negligible (Re-Cu distances are 3.50 to approximately 3.54 A as compared with Re-Re distances ranging from 2.69 to 2.81 A).     

Construction of [(eta5-C5Me5)WS3Cu3]-based supramolecular compounds from preformed incomplete cubane-like clusters [PPh4][(eta5-C5Me5)WS3(CuX)3] (X = CN, Br)

Approaches to the assembly of (eta5-C5Me5)WS3Cu3-based supramolecular compounds from two preformed incomplete cubane-like clusters [PPh4][(eta5-C5Me5)WS3(CuX)3] (X = CN, 1a; X = Br, 1b) have been investigated. Treatment of 1a with LiBr/1,4-pyrazine (1,4-pyz), pyridine (py), LiCl/py, or 4,4'-bipyridine (4,4'-bipy) and treatment of 1b with 4,4'-bipy gave rise to a new set of W/Cu/S cluster-based compounds, [Li[((eta5-C5Me5)WS3Cu3(mu3-Br))2(mu-CN)3].C6H6]infinity (2), [(eta5-C5Me5)WS3Cu3(mu-CN)2(py)]infinity (3), [[PPh4][(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)].py]infinity (4), [PPh4]2[(eta5-C5Me5)WS3Cu3(CN)2]2(mu-CN)2.(4,4'-bipy) (5), and [[(eta5-C5Me5)WS3Cu3Br(mu-Br)(4,4'-bipy)].Et2O]infinity (6). The structures of 2-6 have been characterized by elemental analysis, IR spectra, and single-crystal X-ray crystallography. Compound 2 displays a 1D ladder-shaped chain structure built of square-like [[(eta5-C5Me5)WS3Cu3(mu3-Br)(mu-CN)]4](mu-CN)2(2-) anions via two pairs of Cu-mu-CN-Cu bridges. Compound 3 consists of a single 3D diamond-like network in which each (eta5-C5Me5)WS3Cu3 unit, serving as a tetrahedral node, interconnects with four other nearby units through Cu-mu-CN-Cu bridges. Compound 4 contains a 1D zigzag chain array made of cubane-like [(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)]- anions linked by a couple of Cu-mu-CN-Cu bridges. Compound 5 contains a dimeric structure in which the two incomplete cubane-like [(eta5-C5Me5)WS3(CuCN)2(mu-CN)]- anions are strongly held together via a pair of Cu-mu-CN-Cu bridges. Compound 6 contains a 2D brick-wall layer structure in which dimers of [(eta5-C5Me5)WS3Cu3Br(4,4'-bipy)]2 are interconnected via four Cu-mu-Br-Cu bridges. The successful construction of (eta5-C5Me5)WS3Cu3-based supramolecular compounds 2-6 from the geometry-fixed clusters 1a and 1b may expand the scope of the rational design and construction of cluster-based supramolecular assemblies.     

Synthesis, reactivity, and X-ray crystallographic characterization of mono-, di-, and tetranuclear palladium(II)-metalated species

The reactivity of the tetranuclear metallated palladium compound (Pd[mu 2-(C6H4)PPh2]Br)4 (1) with different ligands has been investigated with the aim of evaluating the influence of the entering ligand on the nature of the reaction products. The results confirmed the ability of the ligand [(C6H4)PPh2]- to expand a bridging [mu 2-] or a chelating [eta 2-] coordination mode, depending on the auxiliary ligands present in the complex. Bulky phosphines stabilize mononuclear species of formula (Pd[eta 2-(C6H4)PPh2]Br[P]), with a four-atom metallocycle, while small phosphines give dinuclear compounds. The molecular structures of three different metalated palladium compounds have been determined by single-crystal X-ray crystallography; the tetranuclear (Pd[mu 2-(C6H4)PPh2]Cl)4 (2), the dinuclear(Pd[mu 2-(C6H4)PPh2]Br[PMe3])2 (3), and the mononuclear (Pd[eta 2-(C6H4)PPh2]Br[PCBr]), (PCBr = P(o-BrC6H4)Ph2) (9) were obtained, the first one by halogen exchange reaction and the others by frame degradation of 1.     

Triazenide-bridged rhodium-palladium complexes: [I2Rh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)]-, a stable paramagnetic [RhPd]4+ species with a localised Rh(II) centre

Deprotonation of mixtures of the triazene complexes [RhCl(CO)2(p-MeC6H4NNNHC6H4Me-p)] and [PdCl(eta(3)-C3H5)(p-MeC6H4NNNHC6H4Me-p)] or [PdCl2(PPh3)(p-MeC6H4NNNHC6H4Me-p)] with NEt3 gives the structurally characterised heterobinuclear triazenide-bridged species [(OC)2Rh(mu-p-MeC6H4NNNC6H4Me-p)2PdLL'] {LL' = eta(3)-C3H5 1 or Cl(PPh3) 2} which, in the presence of Me3NO, react with [NBu(n)4]I, [NBu(n)4]Br, [PPN]Cl or [NBu(n)4]NCS to give [(OC)XRh(mu-p-MeC6H4NNNC6H4Me-p)2PdCl(PPh3)]- (X = I 3-, Br 4-, Cl 5- or NCS 6-) and [NBu(n)4][(OC)XRh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)], (X = I 7- or Br 8-). The allyl complexes 7- and 8- undergo one-electron oxidation to the corresponding unstable neutral complexes 7 and 8 but, in the presence of the appropriate halide, oxidative substitution results in the stable paramagnetic complexes [NBu(n)4][X2Rh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)], (X = I 9- or Br 10-). X-Ray structural (9-), DFT and EPR spectroscopic studies are consistent with the unpaired electron of 9- and 10- localised primarily on the Rh(II) centre of the [RhPd]4+ core, which is susceptible to oxygen coordination at low temperature to give Rh(III)-bound superoxide.     

Tetraphosphinitoresorcinarene complexes: cationic silver(I) and copper(I) halide complexes as mercurate(II) anion receptors

The reactions of mercury(II) halides with the tetraphosphinitoresorcinarene complexes [P4M5X5], where M=Cu or Ag, X=Cl, Br, or I, and P4=(PhCH2CH2CHC6H2)4(O2CR)4(OPPh2)4 with R=C6H11, 4-C6H4Me, C4H3S, OCH2CCH, or OCH2Ph, have been studied. The reactions of the complexes with HgX2 when M=Ag and X=Cl or Br occur with elimination of silver(I) halide and formation of [P4Ag2X(HgX3)], but when M=Ag and X=I, the complexes [P4Ag4I5(HgI)] are formed. When M=Cu and X=I, the products were the remarkable capsule complexes [(P4Cu2I)2(Hg2X6)]. When M=Ag and X=I, the reaction with both CuI and HgI2 gave the complexes [P4Cu2I(Hg2I5)]. Many of these complexes are structurally characterized as containing mercurate anions weakly bonded to cationic tetraphosphinitoresorcinarene complexes of copper(I) or silver(I) in an unusual form of host-guest interaction. In contrast, the complex [P4Ag4I5(HgI)] is considered to be derived from an anionic silver cluster with an iodomercury(II) cation. Fluxionality of the complexes in solution is interpreted in terms of easy, reversible making and breaking of secondary bonds between the copper(I) or silver(I) cations and the mercurate anions.     

Pathway from chain to dimer in Cu(I) camphor hydrazone complexes

The chemical reactivity, molecular structure, and surface characteristics of Cu(I) camphor hydrazone compounds indicate that exist a structural pathway for conversion of coordination polymers into dimers and vice versa. By X-ray diffraction analysis two polymorphic forms of the chain compound [{CuCl}(2)(Me(2)NNC(10)H(14)O)](n) were identified that essentially differ in the structural arrangement and geometry of the non-linear copper atom. The characterization of the dimer complexes [{Cu(Me(2)NNC(10)H(14)O)}(2)(μ-X)(2)] (X = Cl or Br) was also achieved by X-ray diffraction analysis showing the unusual arrangement of the camphor hydrazone ligands that occupy the same side of the molecule. Bond lengths and torsion angles show that one of the polymorphic forms is structurally close to the related dimer. The surface composition of the coordination polymers [{CuX}(2)(YNC(10)H(14)O)](n) (X = Cl, Y = NMe(2), NH(2); X = Br, Y = NH(2)) and dimers [{Cu(Me(2)NNC(10)H(14)O)}(2)(μ-X)(2)] (X = Cl or Br) studied by X-ray Photoelectron Spectroscopy corroborate the molecular properties and the reactivity trend.