Synthesis and Characterization of La（OH）3 Nanorods by Hydrothermal Microemulsion Method

La（OH）3 nanorods with diameters of 20-40 nm and lengths of 200-300 nm were synthesized by a hydrothermal microemulsion method. The structure and morphology of the final products were characterized by X-ray powder diffraction （XRD）, transmission electron microscopy （TEM）, and field emission scanning electron microscope （FESEM）.     

不同形貌ZnSe的制备及光电化学性能

采用水热法制备了ZnSe纳米棒和微球, 用XRD, TGA-DTA和SEM等技术对其进行了表征, 提出了解释ZnSe微球的形成新机理. 研究结果表明, 纳米棒直径为50~100 nm, 棒长约为200~300 nm, ZnSe微球直径为3~10 μm.; 纳米棒在反应温度为240 ℃时具有闪锌矿和纤维锌矿型混晶结构, 微球在反应温度为210 ℃时具有闪锌矿结构; 将ZnSe纳米棒和微球均匀地涂在导电玻璃的导电面上, 于380 ℃煅烧40 min后制成膜电极, 并进行了光电化学研究, 纳米棒膜结构电极最高单色光的光电转换效率(IPCE)可达到9.09%.     

From layered double hydroxide to spinel nanostructures: facile synthesis and characterization of nanoplatelets and nanorods

Mg-Al spinel (MgAl2O4) nanorods and nanoplatelets transformed from Mg-Al layered double hydroxide (Mg-Al-LDHs) were synthesized via a combined hydrothermal method and calcination route using Al(NO3).9H2O and Mg(NO3)2.6H2O as raw materials. The nanorods and nanoplatelets were characterized by means of physical techniques, including powder X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microcopy (HRTEM), selected-area electron diffraction (SAED), Fourier transform infrared spectra (FT-IR), thermogravimetric (TG), and nitrogen adsorption-desorption isotherms. XRD patterns reveal that the Mg-Al-LDHs nanostructures were obtained under a hydrothermal reaction temperature of 200 degrees C and Mg-Al spinel nanostructures were fabricated via calcination of the Mg-Al-LDHs nanostructures at 750 degrees C. It can be seen from TEM that the sizes of the Mg-Al-LDHs nanoplatelets were about 20-40 nm and the diameters of the MgAl2O4 nanorods were ca. 6 nm. The HRTEM images indicate that the crystal lattice spaces of the MgAl2O4 nanorods and nanoplatelets are 0.282 and 0.287 nm, respectively.     

Synthesis and evolution of PbS nanocrystals through a surfactant-assisted solvothermal route

We present a surfactant-assisted solvothermal approach for the controllable synthesis of a PbS nanocrystal at low temperature (85 degrees C). Nanotubes (400 nm in length with an outer diameter of 30 nm), bundle-like long nanorods (about 5-15 mum long and an average diameter of 100 nm), nanowires (5-20 mum in length and with a diameter of 20-50 nm), short nanorods (100-300 nm in length and an axial ratio of 5-10), nanoparticles (25 nm in width with an aspect ratio of 2), and nanocubes (a short axis length of 10 nm and a long axis length of 15 nm) were successfully prepared and characterized by transmission electron microscopy, scanning electron microscopy, and powder X-ray diffraction pattern. A series of experimental results indicated that several experimental factors, such as AOT concentration, ratio of [water]/[surfactant], reaction time, and ratio of the reagents, play key roles in the final morphologies of PbS. Possible formation mechanisms of PbS nanorods and nanotubes were proposed.     

Sonochemical fabrication and characterization of stibnite nanorods

Regular stibnite (Sb(2)S(3)) nanorods with diameters of 20-40 nm and lengths of 220-350 nm have been successfully synthesized by a sonochemical method under ambient air from an ethanolic solution containing antimony trichloride and thioacetamide. The as-prepared Sb(2)S(3) nanorods are characterized by employing techniques including X-ray powder diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis, transmission electron microscopy, selected area electron diffraction, high-resolution transmission electron microscopy, and optical diffuse reflection spectroscopy. Microstructural analysis reveals that the Sb(2)S(3) nanorods crystallize in an orthorhombic structure and predominantly grow along the (001) crystalline plane. High-intensity ultrasound irradiation plays an important role in the formation of these Sb(2)S(3) nanorods. The experimental results show that the sonochemical formation of stibnite nanorods can be divided into four steps in sequence: (1) ultrasound-induced decomposition of the precursor, which leads to the formation of amorphous Sb(2)S(3) nanospheres; (2) ultrasound-induced crystallization of these amorphous nanospheres and generation of nanocrystalline irregular short rods; (3) a crystal growth process, giving rise to the formation of regular needle-shaped nanowhiskers; (4) surface corrosion and fragmentation of the nanowhiskers by ultrasound irradiation, resulting in the formation of regular nanorods. The optical properties of the Sb(2)S(3) amorphous nanospheres, irregular short nanorods, needle-shaped nanowhiskers, and regular nanorods are investigated by diffuse reflection spectroscopic measurements, and the band gaps are measured to be 2.45, 1.99, 1.85, and 1.94 eV, respectively.     

Facile route to alpha-FeOOH and alpha-Fe2O3 nanorods and magnetic property of alpha-Fe2O3 nanorods

alpha-FeOOH nanorods with diameters of 15-25 nm and lengths up to 170-300 nm were synthesized in high yield via a facile and template-free hydrothermal method at low temperature. After calcining the as-synthesized alpha-FeOOH at 250 degrees C for 2 h, we could obtain alpha-Fe2O3 nanorods. Interestingly, the as-obtained alpha-Fe2O3 nanorods exhibited weakly ferromagnetic characteristics at low temperature and superparamagnetic property at room temperature, which is different from the behavior of the corresponding bulk material.     

简捷水热前驱物技术制备钛酸钡纳米棒与纳米球

A facile synthesis route has been developed to prepare barium titanate nanoparitcles via a low temperature (120 ℃) hydrothermal decomposition of single-source metal-organic precursor. A mixture of tetramethylammonium hydroxide (TMAH) and distilled water was used as reaction media, and Barium titanium ethyl-hexano- isoproxide [BaTi(O₂CC₇H₁₅)(OC₃H₇)₅] was used as precursor. The architecture of products can be selectively controlled from nanorods to nanospheres by adjusting the precursor′s concentration in the reaction system. Powder X-ray diffraction (XRD) analysis indicated that the products were in cubic phase. Transmission electronic microscopy (TEM) observation showed that the nanospheres were 30～50 nm in diameter, and the nanorods were 5～10 nm in diameter and 100～600 nm in length, respectively. Phase transformation behavior of the as-prepared products was also investigated.     

Hydrothermal preparation of boehmite nanorods by selective adsorption of sulfate

A facile hydrothermal method was developed to synthesize boehmite nanorods with a length of 50-2000 nm, a diameter of 6-20 nm, and a preferential growth along [100] by treating the Al(OH)(3) gel in acidified sulfate solutions at 240 degrees C. Studies on the hydrothermal treatment of Al(OH)(3) gel in sulfate solutions showed that the morphology and the composition of the hydrothermal products were connected with the sulfate concentration and the pH of the hydrothermal solution. The aspect ratio of the boehmite nanorods increased to 300 as the initial H(2)SO(4) concentration increased to 0.043 mol x L(-1), whereas boehmite nanorods and (H(3)O)Al(3)(SO(4))(2)(OH)(6) cubic particles coexisted in the case of the initial H(2)SO(4) concentration > or = 0.054 mol x L (-1). Sole boehmite nanoflakes with a diameter of about 50 nm were formed under alkaline conditions (pH 10.5) despite the existence of the sulfate. The chemical and Raman analyses indicated that SO(4)(2-) in acidified solutions adsorbed on the boehmite surface via H-bonds. On the basis of the above results, the growth of boehmite along the [100] direction was attributed to the selective adsorption of SO(4) (2-) on the (010) and (001) planes of boehmite.     

Synthesis and characterization of Mn2P2S6 single-crystal nanorods and nanotubes

Mn2P2S6 single-crystal nanorods with diameters 20-40 nm and lengths up to 1 microm and nanotubes with diameters 40-50 nm and lengths ranging between 110 and 170 nm have been prepared through a low-temperature solvothermal method. They have been characterized by X-ray diffraction, transmission electron microscopy (TEM), high-resolution (HR) TEM, electron diffraction, energy-dispersive spectrometry analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy.     

Generalized synthesis of metal phosphide nanorods via thermal decomposition of continuously delivered metal-phosphine complexes using a syringe pump

We synthesized uniform-sized nanorods of transition metal phosphides from the thermal decomposition of continuously delivered metal-phosphine complexes using a syringe pump. MnP nanorods with dimensions of 8 nm x 16 nm and 6 nm x 22 nm sized were synthesized by the thermal decomposition of Mn-TOP complex, which was prepared from the reaction of Mn(2)(CO)(10) and tri-n-octylphosphine (TOP), using a syringe pump with constant injection rates of 10 and 20 mL/h, respectively. When Co-TOP complex, which was prepared from the reaction of cobalt acetylacetonate and TOP, was reacted in a mixture solvent composed of octyl ether and hexadecylamine at 300 degrees C using a syringe pump, uniform 2.5 nm x 20 nm sized Co(2)P nanorods were generated. When cobaltocene was employed as a precursor, uniform Co(2)P nanorods with 5 nm x 15 nm were obtained. When Fe-TOP complex was added to trioctylphosphine oxide (TOPO) at 360 degrees C using a syringe pump and then allowed to age at 360 degrees C for 30 min, uniform-sized FeP nanorods with an average dimension of 12 nm x 500 nm were produced. Nickel phosphide (Ni(2)P) nanorods with 4 nm x 8 nm were synthesized successfully by thermally decomposing the Ni-TOP complex, which was synthesized by reacting acetylacetonate [Ni(acac)(2)] and TOP. We measured the magnetic properties of these nanorods, and some of the nanorods exhibited different magnetic characteristics compared to the bulk counterparts.     

模板法室温合成CdS纳米棒

模板法室温合成CdS纳米棒;模板法;硫化镉;一维CdS纳米材料     

Synthesis and optical properties of colloidal tungsten oxide nanorods

Thermal decomposition of W(CO)6 in oleylamine in the presence of mild oxidant Me3NO.2H2O produces tungsten oxide nanorods with diameters ranging from 3 to 6 nm. The size of nanorods can be easily varied by the employed surfactant ratio or reaction temperature. The prepared tungsten oxide nanorods exhibit strong photoluminescence (PL) peaks in 300-500 nm, which show a weak size dependency.     

Synthesis of hexagonal BaTa2O6 nanorods and influence of defects on the photocatalytic activity

Hexagonal barium tantalate (BaTa2O6) nanorods were synthesized by a hydrothermal method based on the reaction of concentrated Ba(OH)2 solution and Ta2O5. BaTa2O6 samples show a uniform cylindrical structure with diameters of 5-30 nm and the lengths of 50-200 nm. The formation of BaTa2O6 nanorods follows a dissolution-recrystallization mechanism and is governed by hydrothermal temperature and time. BaTa2O6 nanorod samples prepared at 270 degrees C for 72 h have exhibited the highest photocatalytic activity in the degradation of Rhodamine B (RhB) in aqueous solution under UV radiation. Hydrogen-related defects were detected in BaTa2O6 nanorods, which originate from the oxygen octahedron. The number of defects was dependent on the hydrothermal temperature, and the photocatalytic activities of BaTa2O6 nanorods increase with the decrease of defect amounts. On the basis of the experiment results, the difference in photocatalytic activities for samples is mainly caused by lattice defects, which can act as inactivation centers.     

水热法合成α-MnO2纳米棒及其电化学性能

以KMnO4、氧化石墨(GO)和硫酸为原料,在120℃水热条件下3 h成功合成了直径为10~20 nm,长度为300~400 nm的α-MnO2纳米棒。研究发现GO的引入降低了纳米棒的制备温度,缩短了反应时间。电化学测试结果表明,在1 mol.L-1Na2SO4中性水系电解液中,该纳米棒表现出良好的电容性能,当扫描速率分别为2 mV.s-1和5 mV.s-1时,比电容分别为276 F.g-1和240F.g-1;该纳米材料是一种潜在的电化学电容器电极材料。     

Can the light scattering depolarization ratio of small particles be greater than 1/3?

According to the theory of light scattering by small randomly oriented particles, the depolarized ratio of the scattered intensities, I(vh)/I(vv), cannot exceed 1/3. Here we show that this conclusion does not hold for nonspherical plasmon resonant metal particles. Our analysis is based on the Rayleigh approximation and the exact T-matrix method as applied to spheroids and circular cylinders with semispherical ends. For small particles, the condition I(vh)/I(vv) >1/3 can be satisfied within the upper left quadrant of the complex relative dielectric permeability Real(eps) < -2 (rods) and within the upper unit semicircle centered at Real(eps) = -1 (disks). For gold nanorods with the axis ratio exceeding 2, the maximal theoretical values I(vh)/I(vv) lie between 1/3 and 3/4 at wavelengths of 550-650 nm. The extinction and static light scattering spectra (450-850 nm, at 90 degrees degrees) as well as the depolarized ratio of He-Ne laser light scattering were measured with gold nanospheres (the average diameters of 21, 29, and 46 nm) and nanorods (the longitudinal plasmon resonance peak positions at 655, 692, and 900 nm). The measured depolarization ratios of nanospheres (0.07-0.16) and nanorods (0.3-0.48) are in good agreement with theoretical calculations based on estimations of the average particle size and shape.     

水热微乳法合成La(OH)3纳米棒的形貌控制研究

自1991年Iijima发现碳纳米管以来,一维纳米材料如纳米管、纳米线、纳米棒和纳米纤维等由于其具有独特的光、电、磁等性质及其潜在的应用前景而引起全世界的广泛关注,一维纳米材料的制备方法有化学气相沉积法、溶胶一凝胶法、催化剂辅助法、固相化学反应法、模板法、溶剂热法、微乳法和水热,微乳法等,其中水热,微乳法是近年来兴起的一种很有发展前途的制备一维纳米材料的方法。     

A simple route to nanocrystalline silicon carbide

Nanocrystalline silicon carbide has been prepared via reacting magnesium silicide (Mg₂Si) with carbon tetrachloride (CCl₄) in an autoclave at 450-600°C. X-ray diffraction patterns of the products can be indexed as the cubic cell of SiC with the lattice constant, a=4.352 Å, in good agreement with a=4.349 Å (JCPDS card No. 75-0254). The transmission electron microscopy images show that the sample mainly consists of nanoparticles with an average size from 30 to 80 nm co-existing with a small fraction of nanorods and nanowires. Typically the nanorods range from 20 to 40 nm in diameter and the nanowires have diameters of 20 nm and lengths up to 10 μm. The Raman spectrum shows a characteristic sharp peak at 790 cm⁻¹. X-ray photoelectron spectra (XPS) gives an atomic ratio of Si to C as 1.08:1.00 from the quantification of the peak intensities. Photoluminescence spectrum reveals that the SiC sample emits ultraviolet light of 328 nm. A possible mechanism and the influence of temperature on the formation of crystalline SiC are proposed.     

A facile sulfur vapor assisted reaction method to grow boron nitride nanorings at relative low temperature

Boron nitride (BN) nanorings were synthesized using a sulfur vapor assisted solid-state method at 600 degrees C. The rings had typical diameters of 100-300 nm, and the shells were 5-20 nm thick and about 50 nm wide. On the basis of the characterization of X-ray powder diffraction pattern (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transformation infrared spectroscopy (FTIR) measurement, the as-prepared product was pure-phase hexagonal BN. High-resolution transmission electron microscopy (HRTEM) images proved that the nanorings were formed through the coiling of the (002) planes of hexagonal BN. A possible growth process for BN nanorings is suggested.     

Large-scale synthesis of TiO2 nanorods via nonhydrolytic sol-gel ester elimination reaction and their application to photocatalytic inactivation of E. coli

A simple method of synthesizing a large quantity of TiO(2) nanorods was developed. A nonhydrolytic sol-gel reaction between titanium(IV) isopropoxide and oleic acid at 270 degrees C generated 3.4 nm (diameter) x 38 nm (length) sized TiO(2) nanocrystals. The transmission electron microscopic image showed that the particles have a uniform diameter distribution. X-ray diffraction and selected-area electron diffraction patterns combined with high-resolution transmission electron microscopic image showed that the TiO(2) nanorods are highly crystalline anatase crystal structure grown along the [001] direction. The diameters of the TiO(2) nanorods were controlled by adding 1-hexadecylamine to the reaction mixture as a cosurfactant. TiO(2) nanorods with average sizes of 2.7 nm x 28 nm, 2.2 nm x 32 nm, and 2.0 nm x 39 nm were obtained using 1, 5, and 10 mmol of 1-hexadecylamine, respectively. The optical absorption spectrum of the TiO(2) nanorods exhibited that the band gap of the nanorods was 3.33 eV at room temperature, which is 130 meV larger than that of bulk anatase (3.2 eV), demonstrating the quantum confinement effect. Oleic acid coordinated on the nanorod surface was removed by the reduction of the carboxyl group of oleic acid, and the Brunauer-Emmett-Teller surface area of the resulting naked TiO(2) nanorods was 198 m(2)/g. The naked TiO(2) nanorods exhibited higher photocatalytic activity than the P-25 photocatalyst for the photocatalytic inactivation of E. coli.     

Preparation and characterization of gadolinium hydroxide single-crystalline nanorods by a hydrothermal process

The Gd(OH)3 nanorods with diameters of ca.40-60 nm and lengths of more than 400-550 nm have been prepared by a novelhydrothermal technique.The structural features and chemical composition of the nanorods were investigated by X-ray diffraction(XRD),transmission electron microscopy(TEM),and field emission scanning electron microscope(FESEM),selected areaelectron diffraction(SAED),and high resolution transmission electron microscopy(HRTEM).The possible mechanism for theformation of Gd(OH)3 nanorods was proposed.