Coordination ability of the heterocycles 1,3-dithia-2-arsa- and -stiba-cyclopentanes towards sulfur containing ligands,part II. Diheterocyclic dithiocarbamate complexes. X-ray structure of the 4-morpholinecarbodithioate of 1,3-dithia-2-arsa-cyclopentane

Summary A series of diheterocyclic dithiocarbamate complexes of the typeRNCS₂ MS₂C₂H₄, whereR=pyrrolidyl, 3-pyrrolyl, 4-morpholyl, 3-methlpiperidyl andM=As or Sb were obtained and characterized by IR,¹H, and¹³C-NMR, mass spectroscopy and elemental analyses. The X-ray crystal structure determination of the 4-morpholinecarbodithioate of 1,3-dithia-2-arsa-cyclopentane shows a monodentate behaviour of theRNCS₂ entity.Dedicated to Dr. Lydia Rodríguez on the Occasion of her 60th Birthday.     

Coordinating ability of the heterocycles 1,3-dithia-2-arsa- and stiba-cyclopentanes. Part III. Dithioacid and dithiocarbamate complexes containing a free functional group. Crystal structure of 2-pyrrolidonedithiocarbamate of 1,3-dithia-arsa-cyclopentane

Three 1,1-dithioacids containing an additional functional group, 2-pyrrolidone-1-carbodithioic acid, 2-hydroxycyclopentene-1-carbodithioic acid, and 2-pyrrolidone-1,3-bis(carbodithioic) acid, were reacted with the Group 15 heterocycles 2-chloro-1,3-dithia-2-arsa- and stiba-cyclopentanes (CIMS₂C₂H₄; M = As, Sb). The dithiocomplexes obtained were characterized by spectroscopic methods and elemental analyses. The X-ray structure determination of the 2-pyrrolidonedithiocarbamate of 1,3-dithia-arsacyclopentane shows a monodentate behavior of the dithiocarbamate entity and the absence of participation of the carbonyl oxygen in the coordination.     

Synthesis, characterization, and SAMs electroactivity of ruthenium complexes with sulfur containing ligands

The vibrational and ¹H NMR data hints that the coordination of the 2,2′-dithiodipyridine (2-pySS) ligand to the [Ru(CN)₅]³⁻ metal center occurs through the sulfur atom instead of the nitrogen atoms which is usually observed for N-heterocyclic ligands. Electrochemical results show that this coordination mode implies an additional thermodynamic stabilization of the Ru^II over Ru^III oxidation state due to a relative stronger π-back-bonding interaction with the empty low-lying dπ orbitals of the sulfur atom. Computational data reinforce the experimental results showing that the 2-pySS Lewis base centers are located on the sulfur atoms. Ligands containing only sulfur atoms as coordination sites (2,2′-dithiodipyridine N-oxide (2-pySSNO), 1,4-dithiane (1,4-dt), and 2,6-dithiaspiro[3.3]heptane (asp)) were also coordinated to the [Ru(CN)₅]³⁻ metal center to undoubtedly correlate the electrochemical results with the ligand coordination atom. Among the synthesized compounds, the [Ru(CN)₅(1,4-dt)]³⁻ and [Ru(CN)₅(asp)]³⁻ complexes showed to be able to form self-assembled monolayers (SAMs) on gold. These SAMs, which were characterized by SERS (surface-enhanced Raman scattering) spectroscopy, successfully assessed the heterogeneous electron transfer reaction of the cytochrome c metalloprotein in physiological medium.     

The thermal decomposition of transition-metal complexes containing heterocyclic ligands: I. Benzothiazole complexes

Enthalpies of the decomposition reactions MX₂L₂(c)→MX₂(c) + 2L (g), where M is Mn, Co, Ni, Cu, or Cd, X is Cl and/or Br, and L is benzothiazole or 2-methyl-benzothiazole have been measured by use of a differential scanning calorimeter. Specific heats and enthalpies of sublimation of some of the complexes have been obtained.     

Kinetics and equilibrium constants of some pentacyanoferrate(II) complexes of nitrogen and sulfur containing heterocycles

The kinetics of the substitution reactions of Fe(CN)₅H₂O³⁻ ion with a series of nitrogen and sulfur containing heterocycles were studied in aqueous media. In the presence of excess ligand, varied over a large range of concentrations, second-order rate constants were calculated at μ = 0.100 M NaClO₄. Activation parameters for the formation reactions were found, ΔH*ast; and ΔS*, 28 ± 6 kJ/mol and 135±20 J/mol, respectively. The results are interpreted as being consistent with dissociative, SN₁ mechanism. The kinetics of formation and dissociation were studied by stopped-flow technique at several temperatures. An investigation of the kinetics of exchange of coordinated heterocycles for 1,3,5-triazine, yielded rate saturation that is typical of a limiting SN₁ mechanism. Activation parameters of the limiting first-order specific rate of dissociations were found with ΔH* and ΔS* 53±2 kJ/mol and 105±5 J/mol, respectively. From the specific rates of formation and dissociation reactions the equilibrium constants were calculated. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 415–418, 1998     

The thermal decomposition of transition-metal complexes containing heterocyclic ligands: 2.Benzoxazole complexes

Enthalpies of the overall decomposition reactions

and of the intermediate reactions involving stepwise loss of ligand, L, where M is Mn, Co, Ni, Cu, or Cd, X is Cl or Br, and L is benzoxazole, 2-methylbenzoxazole, or 2,5-dimethylbenzoxazole have been measured by use of a differential scanning calorimeter. Specific heats of CoCl₂(2-methylbenzoxazole)₂, and CoBr₂(2-methylbenzoxazole)₂ are reported together with enthalpies of sublimation of CoCl₂(2-methylbenzoxazole)₂, CoBr₂(2-methyl-benzoxazole)₂, CoCl₂(2,5-dimethylbenzoxazole)₂ and CoBr₂(2,5-dimethylbenzoxazole)₂. Enthalpies of decomposition of benzoxazole complexes are found to be greater than those of the corresponding pyridine complexes, but less than those of the analogous benzothiazole complexes. However, the mean bond dissociation energies of the cobalt—nitrogen and cobalt—oxygen bonds in these complexes are all in the region 33±2 kcal mol^?.     

Tetrazoles as ligands,part I. Transition metal(II) salts and complexes of 5-cyanotetrazole

Summary Transition metal(II) ions and 5-cyanotetrazole (CNHT) form two types of compounds; type I with two 5-cyanotetrazolate (CNT) ions and an additional CNHT molecule and type II with only the two [CNT]^– ions. Water molecules are invariable included in all compounds and are considered to be essential for the existence of the crystal structure. The complexes were identified and characterized by chemical analyses, i.r. and ligand field spectra. Some structural features have been predicted from these spectra and a polynuclear complex formation is apparent.     

One pot synthesis of dimanganese carbonyl complexes containing sulfur and phosphorus donor ligands using tricarbonylpentadienylmanganese

The reaction of tricarbonylpentadienylmanganese with aryl mercaptans in the presence of phosphines or phosphites afforded dinuclear complexes, [Mn₂(CO)₄(μ-CO)(μ-SR)₂(PR′₃)₂]; R = Ph for PR′₃ = PPh₃, PMe₃, P(OMe)₃, P(OEt)₃, PMePh₂ and R = m-, p-NH₂C₆H₄S-, for PR′₃ = PPh₃ in one pot synthesis. Two reaction routes were proposed for the formation of the dinuclear complexes depending on the relative basicity of the sulfur vs. phosphine ligands. Characterization of the complexes was effected in solution and, for [Mn₂(CO)₄(μ-CO)(μ-SPh)₂(PPh₃)₂], [Mn₂(CO)₄(μ-CO)(μ-SPh)₂(P(OEt)₃)₂], and [Mn₂(CO)₄(μ-CO)(μ-SPh)₂(PMe₃)₂], by X-ray crystallographic analysis.     

Transition metal complexes of amidinourea and related ligands,part 3. Mixed ligand complexes of cobalt(III) containing biguanide,O-methyl-l-amidinourea and some bidentate ON and NN donor ligands

Summary New cobalt(III) complexes of general formula [Co(AA)(bigH)₂ ]X₃ and [Co(amidinourea)(MAUH)₂ ]X₃ where AA = amidinourea,N-phenylsalicylideneimine, bigH = biguanide, MAUH =O-methyl-l-amidinourea, X = 0.5 [SO₄]^2–, CI^–, Br^– or 0.33 [Co(NO₂)₆ ]^3– have been synthesized and characterized. Conductance measurements (aqueous solution) show [Co(amidinourea)(bigH)₂]Cl₃ and [Co(N-phem,lsalicylideneimine)(bigH)₂]CI₃ to be triunivalent.Author to whom correspondence should be addressed.     

Synthesis, characterization, and reactivity of rhodium(I) acetylacetonato complexes containing pyridinecarboxaldimine ligands

Addition of o-C 6H 4NCHNAr to Rh(coe) 2(acac) (coe = cis-cyclooctene, acac = acetylacetonato) gave several new iminopyridine rhodium(I) complexes of the type Rh(acac)(kappa (2)- o-C 6H 4 NCH NAr) ( 1a Ar = 4-C 6H 4-OMe; 1b Ar = 2,6-C 6H 3-Me 2; 1c Ar = 2,6-C 6H 3-Et 2; 1d Ar = 2,6-C 6H 3- i-Pr 2). All new rhodium complexes have been characterized by a number of physical methods, including multinuclear NMR spectroscopy and X-ray diffraction studies for 1b and 1c. Addition of CHCl 3 to 1a afforded the corresponding rhodium(III) complex trans-Rh(kappa (2)- o-C 6H 4 NCH NAr)(CHCl 2)(Cl)(acac) ( 2). Addition of B 2cat 3 (cat = 1,2-O 2C 6H 4) to 1 gave zwitterionic Rh(eta (6)-catBcat)(kappa (2)- o-C 6H 4 NCH NAr) ( 3). The molecular structure of 3b has been confirmed by a single crystal X-ray diffraction study and shows that the N 2Rh fragment is bound to the catBcat anion via one of the catecholato groups in a eta (6)-fashion. These complexes have also been examined for their ability to catalyze the hydroboration of a series of vinylarenes. Reactions using catecholborane and pinacolborane seem to proceed largely through a dehydrogenative borylation mechanism to give a number of boronated products.     

Rhodium(I) phosphine complexes containing bidentate unsaturated thio ligands: I. Synthesis and characterisation

The rhodium(I) complexes (Ph₃P)₂Rh(LL′), in which LL′ is an unsaturated chelate coordinating via L = S and L′ = N, O, P or S, have been prepared from RhCl(PPh₃)₃ by two routes.Direct substitution of one Ph₃P and Cl^? by the chelate anion gives (Ph₃P)₂Rh[Ph₂PC(S)S] (L = S, L′ = P). Oxidative addition of an NH bond followed by reductive elimination of HCl results in (Ph₃P)₂Rh[Me₂NC(S)NC(S)NMe₂] (L = S, L′ = S), (Ph₃P)₂Rh[PhNC(S)NMe₂] (L = S, L′ = N), (Ph₃P)₂Rh[Ph₂PC(S)NPh) (L = S, L′ = P) and (Ph₃P)₂Rh[Ph₂P(O)C(S)NPh] (L = S, L′ = O).Reaction of the complexes (Ph₃P)₂Rh(LL′) with CO gives (CO)(Ph₃P)Rh(LL′) with CO trans to the chelate donor atom with the lowest trans-influence. Pt(PPh₃)₄ reacts with Me₂NC(S)N(H)C(S)NMe₂ and HN(Ph)C(S)PPh₂, respectively, to give H(Ph₃P)Pt[Me₂NC(S)NC(S)NMe₂] (L = S, L′ = S) and H(Ph₃P)Pt[Ph₂PC(S)NPh] (L = S, L′ = P).The coordinating atoms and their configurations have been assigned by IR ³¹P NMR and ¹H NMR. Some trend in IR and ³¹P NMR paramaters are discussed.     

Crystal structures,spectroscopic and nonlinear optical properties of metal complexes of Schiff-base ligands containing nitrogen and sulfur donors

ML2 type CuII chelates with the Schiff base ligands R-C6H4CHNNHC(S)SCH2Ph (R=NMe2 or -OMe) have been prepared and characterized. Spectroscopic data suggest that the Schiff bases act as singly charged anionic bidentate ligands, forming stable neutral metal complexes. Magnetic and e.s.r. data support a square-planar coordination geometry for both complexes. Single crystal X-ray diffraction analysis of the complexes has established that the Schiff base ligand is deprotonated to give the thiol tautomer, coordinated via the thiolato sulfur and β-nitrogen. The geometry around the metal is square-planar with two equivalent Cu-N and Cu-S bonds; the two phenyl rings and the donor atoms are in one plane forming an extensive electronic delocalization system. Third-order optical nonlinearity measurements show that the complexes exhibit fairly large second-order hyperpolarizabilities. This revised version was published online in June 2006 with corrections to the Cover Date.     

Rhodium(I) phosphine complexes containing bidentate unsaturated thio ligands: II. Reactions with O2 and H2

The rhodium(I) complexes (Ph₃P)₂Rh[Me₂NC(S)NC(S)NMe₂], (Ph₃P)₂Rh[SC(S)NMe₂] and (Ph₃P)₂Rh[PhNC(S)NMe₂] react with O₂ to give 1/1 dioxygen adducts. In solution, trans-(Ph₃P)₂Rh(O₂)[Me₂NC(S)NC(S)NMe₂], cis- and trans-(Ph₃P)₂Rh(O₂)[SC(S)NMe₂] and cis- and trans-(Ph₃P)₂Rh(O₂)[PhNC(S)NMe₂] are observed. For (Ph₃P)₂Rh(O₂)[PhNC(S)NMe₂], there is a solvent effect on the initial cis—trans ratio and the rate of O=PPh₃ formation. In C₆H₆, O=PPh₃ formation from (Ph₃P)₂Rh(O₂)[PhNC(S)NMe₂] is inhibited by additional PPh₃.The reaction of (Ph₃P)₂Rh[Ph₂PC(S)NPh] with O₂ in the presence of additional PPh₃ gives O=PPh₃ and cis-(Ph₃P)₂Rh(O₂)[Ph₂P(O)C(S)NPh] as the only products. The same complex also can be prepared from (Ph₃P)₂Rh[Ph₂P(O)C(S)NPh] and O₂.Only (Ph₃P)₂Rh[PhNC(S)NMe₂] reacts with H₂ at room temperature to give (Ph₃P)₂RhH₂[PhNC(S)NMe₂], which is a catalyst for cyclohexene hydrogenation.     

Macrocyclic gold(I) complexes and [2]catenanes containing carbonyl functionalized diacetylide ligands

The carbonyl derivatized bis(alkyne) O=C(4-C₆H₄OCH₂CCH)₂ was converted into the imine derivatives RN=C(4-C₆H₄OCH₂CCH)₂ [R=OH, NHC(O)NH₂, NHC₆H₃-2,4-(NO₂)₂] and into the 4-bromomethyl-1,3-dioxolane derivative BrCH₂C₂H₃O₂C(4-C₆H₄OCH₂CCH)₂. The alkyne units in these compounds react with [AuCl(SMe₂)] in the presence of base to form the corresponding digold(I) diacetylide complexes, that exist as insoluble oligomers or polymers. They reacted with the diphosphines Ph₂PZPPh₂ [Z=CC, trans-HC=CH and (CH₂)_n, n=3–5] to give macrocyclic gold(I) complexes of the type [Au₂(μ-LL)(μ-PP)], where LL is the diacetylide and PP the diphosphine ligand. The ability of these macrocyclic complexes to self-assemble to [2]catenanes has been studied. The ketone and imine derivatives do not form [2]catenanes because the orientation of the aryl groups is unfavorable, but the 1,3-dioxolane derivatives may catenate if the ring size is optimum.     

From straight chain to macrocyclic complexes containing mixed sulfur/nitrogen donors and coordinated 1,3-diynes

The acid-mediated reaction of [{Co₂(CO)₆(μ-η²-HOCH₂CC-)}₂] (1) with the meta- and para-substituted aminothiophenols, 3-NH₂-C₆H₄SH and 4-NH₂-C₆H₄SH, affords the straight chain species, [{Co₂(CO)₆(μ-η²-(3-NH₂-C₆H₄S)CH₂CC-)}₂] (2) and [{Co₂(CO)₆(μ-η²-(4-NH₂-C₆H₄S)CH₂CC-)}₂] (3), respectively. The molecular structure of 3 reveals the presence of two isomeric forms differing in the relative disposition of the S-aryl groups. Conversely, reaction of 1 with the ortho-substituted aminothiophenol, 2-NH₂-C₆H₄SH, furnishes the 10-membered macrocyclic species [{Co₂(CO)₆}₂{cyclo-μ-η²:μ-η²-CH₂C₂C₂CH₂SC₆H₃-NH-2}] (4) along with the linear chain complex [{Co₂(CO)₆(μ-η²-(2-NH₂-C₆H₄S)CH₂CC-)}₂] (5). On the other hand, treatment of 1 with the ortho-substituted mercaptopyridine, 2-SH-C₅H₄N, in the presence of HBF₄ gives the salt [{Co₂(CO)₆(μ-η²-(2-S-C₅H₄NH)CH₂CC-)}₂](BF₄)₂ (6a) in good yield; work-up in the presence of base affords the neutral complex [{Co₂(CO)₆(μ-η²-(2-S-C₅H₄N)CH₂CC-)}₂] (6b). Single crystal X-ray diffraction studies have been reported on 3-5 and 6a.     

Synthesis and characterization of calcium complexes containing eta 2-pyrazolato ligands

Treatment of calcium bromide with 3,5-di-tert-butylpyrazolatopotassium (2 equiv) in tetrahydrofuran afforded Ca(tBu2pz)2(THF)2 (69%). The reaction of this compound with pyridine (3 equiv), tetramethylethylenediamine (TMEDA, 1 equiv), N,N,N',N',N"-pentamethyldiethylenetriamine (PMDETA, 1 equiv), triglyme (1 equiv), and tetraglyme (1 equiv) yielded Ca(tBu2pz)2(py)3 (51%), Ca(tBu2pz)2(TMEDA) (74%), Ca(tBu2pz)2(PMDETA) (50%), Ca(tBu2pz)2(triglyme) (73%), and Ca(tBu2pz)2(tetraglyme) (57%), respectively. Treatment of the tetrahydrofuran adduct of Ca(Me2pz)2, generated in situ, with PMDETA (1 equiv), triglyme (1 equiv), and tetraglyme (1 equiv) afforded Ca(Me2pz)2(PMDETA) (65%), Ca(Me2pz)2(triglyme) (54%), and Ca(Me2pz)2(tetraglyme) (40%), respectively. The X-ray crystal structures of Ca(tBu2pz)2(py)3, Ca(tBu2pz)2(TMEDA), Ca(tBu2pz)2(PMDETA), Ca(tBu2pz)2(triglyme), and Ca(Me2pz)2(PMDETA) revealed six-, seven-, or eight-coordinate calcium centers with eta 2-pyrazolato ligands. Ca(tBu2pz)2(triglyme) sublimes at 160 degrees C (0.1 mmHg). The potential utility of these complexes as source compounds for chemical vapor deposition processes is discussed.     

Tetrazoles as ligands,part III. Transition metal complexes of 1-alkyltetrazoles

Summary Transition metal(II) tetrafluoroborates react with 1-alkyltetrazoles to give complexes with six ligands per metal ion,viz.; ML₆(BF₄)₂ with M²⁺ = Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ or Zn²⁺ and L =1-methyltetrazole (MTz), 1-ethyltetrazole (ETz) and 1-propyltetrazole (PTz). The complexes were identified and characterized by chemical analyses, i.r. and ligand field spectra. They are apparently mononuclear, containing monodentate ligands for which the Dq values are exceptionally high.     

On the electron diffraction study and conformation of the 2-chloro-1,3-dithia-2-phospholane

Une étude structurale du chloro-2-dithiaphospholane-1,3,2 a été effectuée par diffraction électronique. Une conformation du type enveloppe a$\text{\$}\text{?}$pointe carbone et chlore axial donne le meilleur accord avec les résultats expérimentaux. Ce résultat, comparé avec ceux obtenus par résonance magnétique nucléaire (phase liquide) et diffraction aux rayons X (phase solide), suggère un changement conformationnel du cycle dithiaphospholane entre les trois états considérés. Ce résultat demande cependant à être confirmé de par l'indétermination existant dans l'étude par diffraction électronique.     

Synthesis, structure, and reactions of binuclear gold(I) complexes containing two different bridging ligands

The binuclear cycloaurated compounds [Au(2)(mu-C(6)H(3)-2-PPh(2)-n-Me)(2)] (n = 5, 1a; n = 6, 1b) react with the digold(I) complexes [Au(2)(mu-S(2)CN(n)()Bu(2))(2)] and [Au(2)(mu-dppm)(2)](PF(6))(2) to give heterobridged dinuclear complexes [Au(2)(mu-C(6)H(3)-2-PPh(2)-n-Me)(mu-S(2)CN(n)Bu(2))] (n = 5, 5a; n = 6, 5b) and [Au(2)(mu-C(6)H(3)-2-PPh(2)-n-Me)(mu-dppm)]PF(6), (n = 5, 9a; n = 6, 9b), respectively. Complex 5a exists in the solid state as an infinite zigzag chain of dimeric units with intramolecular Au-Au separations of 2.8331(3) and 2.8243(3) A for independent molecules and intermolecular Au-Au separations of 3.0653(3) and 3.1304(3) A. Both 5a and 5b undergo oxidative addition with halogens to give the heterovalent, gold(I)-gold(III) compounds [XAu(I)(mu-2-Ph(2)PC(6)H(3)-n-Me)Au(III)X(eta(2)-S(2)CN(n)Bu(2))] [n = 5, X = Cl (6a), I (8a); n = 6, X = Cl (6b), Br (7b), I (8b)]. Compound 8a has been shown by X-ray crystallography to contain a gold(III) atom coordinated in a planar array by bidentate, chelating di-n-butyldithiocarbamate, iodide, and the sigma-aryl carbon atom, together with a gold(I) atom that is linearly coordinated by the phosphorus atom of the arylphosphine and by iodide. The intramolecular gold-gold distance of 3.2201(3) A indicates little or no interaction between the metal atoms. In contrast to the behavior of the homobridged complexes 1a and 1b, the heterobridged dithiocarbamate complexes 5a and 5b give structurally similar products on reaction with halogens, irrespective of the position of the ring methyl substituent. Crystal data for [Au(2)(mu-C(6)H(3)-2-PPh(2)-5-Me)(mu-S(2)CN(n)Bu(2))] (5a): triclinic, space group P1 (No. 2), with a = 11.3398(1), b = 15.9750(2), c = 16.4400(3) A, alpha = 91.0735(9), beta = 109.3130(7), gamma = 90.7666(8) degrees, V = 2809.47(6) A(3), and Z = 4. Crystal data for [IAu(I)(mu-2-Ph(2)PC(6)H(3)-5-Me)Au(III)I(eta(2)- S(2)CN(n)Bu(2))] (8a): triclinic, space group P1 (No. 2), with a = 8.6136(2), b = 9.3273, c = 21.1518(4) A, alpha = 84.008(1), beta = 84.945(1), gamma = 75.181(1) degrees, V = 1630.54(6) A(3), and Z = 2.     

Di and monocarbonyl complexes of rhodium(I) containing singly charged bidentate ligands

Summary A series of neutral square planar rhodium(I) dicarbonyls containing singly charged bidentate ligands (salicylaldoxime, -benzoinoxime, -furildioxime, -benzildioxime, dimethylglyoxime, cupferron) has been prepared from three sources: (i) tetracarbonyl--dichlorodirhodium(I), (ii) solutions of hydrated rhodium chloride in DMF held under reflux and (iii) a carbonylated solution of hydrated rhodium chloride in boiling absolute alcohol. These dicarbonyls react with triphenylphosphine,-arsine and -stibine to yield monocarbonyl derivatives. The monocarbonyls form 1 : 1 adducts with TCNE. All complexes have been characterized by elemental analysis, i.r. and uv-visible spectra.