超增溶胶团自组装合成纳米氧化铝

应用超增溶胶团纳米自组装原理,以硝酸铝和尿素为熔盐,聚异丁烯马来酸三乙醇胺为表面活性剂制备超增溶氢氧化铝胶团,然后以氢氧化铝为前躯体合成纳米氧化铝.采用BET、压汞法、SEM、TEM和XRD方法对合成的氧化铝进行表征.结果表明,纳米氧化铝粒子形状为球形体或棒状体,孔道在几十纳米到几百纳米,粒度分布均匀且纯度较高.     

PAA模板体系中CuS纳米棒的自组装合成

合成不同相对分子质量的聚丙烯酸(PAA),并以之为模板,在稀溶液中利用离子的自组装合成CuS中空纳米棒,棒平均直径在60~70 nm之间。结果表明,PAA可很好地作为室温下合成CuS纳米棒的模板剂,体系的pH值、PAA浓度、PAA相对分子质量等条件对生成物的微观形态均有影响。     

特殊纳米结构的化学自组装

本文介绍了近年来国际上一维纳米材料的制备方法的最近进展，如模板法、激光剥蚀法、分子束外延法、有机溶剂中溶液-液体-固体生长法等，同时还介绍了利用新的化学自组装路线制备一维核／鞘结构、无机半导体／高分子纳米电线、金属硫化物纳米空球和花生状纳米结构等工作。     

Au-Pt双金属纳米颗粒在玻碳电极上的自组装

利用硼氢化钠还原HAuCl4和H2PtCl4的混合溶液, 制备了Au- Pt双金属纳米颗粒. UV- Vis、TEM、ED、XRD、XPS等研究结果表明双金属纳米颗粒为Au- Pt合金. 在玻碳电极上通过有机偶联层半胱氨酸进行了Au- Pt双金属纳米颗粒的自组装, 得到Au- Pt/半胱氨酸/玻碳电极, 并通过SEM对其表面结构进行了表征, 粒子的平均粒径为12.6 nm. 用循环伏安法对Au- Pt/半胱氨酸/玻碳电极的电化学性能进行了测试. 结果表明Au- Pt/半胱氨酸/玻碳电极具有良好的电催化甲醇氧化性能.     

聚苯胺纳米粒子的反胶束法合成及自组装

聚苯胺纳米粒子的反胶束法合成及自组装;聚苯胺;纳米粒子;反胶束;自组装     

纳米自组装合成大孔容介孔氧化铝

提出了一种纳米自组装大孔容介孔氧化铝固体材料的制备方法．提出了二级纳米自组装机理和框架式大孔容介孔固体材料形成机理．在一级纳米自组装体,超增溶胶团中,氢氧化铝沉淀与VB值小于1的表面活性剂原位自组装成线状、棒状二级纳米自组装体．二级纳米自组装氢氧化铝焙烧形成棒状纳米氧化铝．对于大孔容介孔固体材料的形成,我们提出了没有外表面要求限制,纳米氧化铝组成没有连续外表面的框架式介孔固体材料机理．采用二级纳米自组装体为模板剂合成出适用于渣油加氢处理催化剂的大孔容介孔固体材料,物理性质为1．8～2．7mL·g^-1的孔容、180～429m^2·g^-1比表面、17～57nm的平均孔径、大于10nm的孔为81％～94％、87％～93％的孔隙率和7．7～25N／mm的强度．     

功能性CdSe纳米晶的合成及自组装膜光致发光

以巯基丙酸(RSH)为稳定剂,采用湿化学法合成了功能性CdSe纳米晶,用XRD、TEM表征其粒度和形貌,用UV-Vis监测成核及成膜过程。结果表明：制得的CdSe近似呈球形,平均粒径为48 nm。利用静电自组装法层层组装成CdSe-PDDA复合膜,荧光测试表明：所得CdSe纳米晶自组装复合膜(CdSe-PDDA)的荧光强度随着组装层数的增加而呈线性增强,该复合膜在582 nm附近有黄绿色荧光发射。     

纳米粒子的界面自组装

近年来,随着纳米技术的发展及Pickering乳液在食品、化妆品、医药等领域中的应用,纳米粒子的界面自组装现象引起了人们的广泛关注。界面能的降低是纳米粒子液液界面自组装的主要驱动力。通过改变纳米粒子的尺寸和表面配体的化学性质,可控制纳米粒子的界面自组装行为。本文综述了不同类型纳米粒子实现界面自组装的研究工作,包括均质纳米粒子、Janus纳米粒子、棒状纳米粒子以及生物纳米粒子。最后,对纳米粒子的界面组装这一领域的可能发展做了展望。     

用自组装法制备聚合物纳米复合膜

文章比较了自组装法（ｓｅｌｆ－ａｓｓｅｍｂｌｙ,ＳＡ）与Ｌａｎｇｍｕｉｒ－Ｂｌｏｄｇｅｔｔ技术（ＬＢ）及其它方法在制备聚合物纳米复合膜时的优劣。ＳＡ法由于操作简单、膜的结构稳定性较高,因此较ＬＢ技术等具有更大的实用价值。利用ＳＡ法,可以制备各种有机聚电解质与其带相反电荷的有机聚电解质、粘土化合物及无机纳米颗粒等组成的聚合纳米复合膜。     

偶氮类液晶基元的合成、表征及纳米胶束的自组装

首先合成由偶氮苯和十二烷基构建的具有表面活性的液晶基元,借助磺酸基和金属离子的垂直整理作用以及芳香基团π-π堆积协同作用在环己烷溶剂中构成稳定的纳米柱胶束,通过元素分析、红外光谱分析、紫外可见光谱分析等手段对化合物的结构和物理化学性质进行了表征,通过TEM观测到形态规则均匀,直径在20nm~40nm左右的纳米柱。该研究对今后对纳米材料自组装制备方面的进一步研究,以及纳米材料的进一步应用提供了理论和实验依据。     

刺激响应性刚柔嵌段共聚物的自组装

刚柔嵌段共聚物是指刚性链段和柔性链段以共价键相连形成的共聚物。不仅由于刚性链段有序排列的特点使得其自组装行为更为丰富多样,而且刚性分子将优异的功能特性赋予到超分子组装体中,有望实现超分子材料的功能应用。这类嵌段共聚物在溶液中自组装形成的聚集体会对外界的刺激(例如pH、光、温度、化学添加剂等)敏感,产生聚集体形态的变化。本文选取了部分典型的具有刺激响应性的刚柔嵌段共聚物,介绍了其智能自组装行为,并对其良好的发展前景做了展望。     

柱状相聚苯乙烯-b-聚乳酸的合成及引导组装

设计并合成了2种柱状相结构的聚苯乙烯-b-聚乳酸(PS-b-PLA)两嵌段共聚物,并表征了它们在化学图案上的引导自组装行为。在辛酸亚锡(Sn(Oct)_2)催化下,采用羟基官能化的聚苯乙烯(PS-OH)大分子引发剂分别引发外消旋丙交酯(rac-LA)和左旋丙交酯(L-LA)开环聚合,制备了两个相对分子质量相近但构型不同的PS-b-PLA:PS-b-PDLLA和PS-b-PLLA。通过核磁共振波谱仪(NMR)、凝胶渗透色谱仪(GPC)、示差扫描量热仪(DSC)、热重分析仪(TGA)、小角X射线衍射仪(SAXS)等测试手段对两个嵌段共聚物的性质进行了表征。然后,将PS-b-PDLLA和PS-b-PLLA薄膜在六方点阵化学图案模板上加热引导自组装,得到长程有序排列的六方柱状相结构。相对于柱状相的PS-b-PLLA,柱状相的PS-b-PDLLA具有较大的拉伸比例,可以在更大的周期范围内组装出规整的六方结构。这一结果与层状相PS-b-PDLLA和PS-b-PLLA薄膜在线性化学图案上组装的结果相似。     

苯胺四聚体-聚乙二醇-苯胺四聚体嵌段共聚物薄膜的自组装

以氨基封端的苯胺四聚体为基础,以甲苯2,4-二异氰酸酯(TDI)为中间体制备了苯胺四聚体-聚乙二醇-苯胺四聚体(ANI₄-PEG-ANI₄,PEG600,M_n＝600)嵌段共聚物,并溶于乙醇/N,N-二甲基甲酰胺(DMF)混合溶剂后,涂覆于导电玻璃(ITO)表面制备成薄膜,利用原子力显微镜(AFM)、紫外-可见光谱(UV-Vis)和循环伏安(CV)等研究了薄膜的自组装及电化学行为等,讨论了诱导溶剂对嵌段共聚物薄膜形态和性能的影响. 研究发现,通过改变混合溶剂比和诱导溶剂种类,ANI₄-PEG-ANI₄嵌段共聚物薄膜可以实现多种形态的转变.     

The Carbon Depositing Behavior and its Kinetic Research in Benzene Alkylation Process Over High Silicate ZSM-5 Zeolite

In our invention, FCC (fluid catalytic cracking) dry gas could be used to react with benzene without any special purification, and more than 90% ethylene was converted to ethylbenzene. The phenomenon of carbon deposition over catalyst surface was obvious and leads to a deactivation of catalyst, so it is important to study the behavior of carbon deposition of catalyst during alkylation of benzene. The influence of several factors such as temperature, reaction time, reactant concentration of the amount and the kinetics of carbon deposition were investigated, during which carbon depositing rate equations were obtained for different reactant.This revised version was published online in November 2005 with corrections to the Cover Date.     

Voltage Stimulated Anion Binding of Metalloporphyrin‐induced Crystalline 2D Nanoflakes

Voltage‐stimulated redox‐active materials have received significant attention in the field of organic electronics and sensor technology. Such stimuli‐responsive materials trigger the formation of crystalline nanostructures and facilitate the design of efficient smart devices hitherto unknown. Herein, we report that free‐base and metallo‐tetratolylporphyrin‐linked ferrocene derivatives ( H₂TTP ‐ Fc and ZnTTP ‐ Fc ) undergo distinct proton/anion binding mechanism in CHCl₃ during bulk electrolysis at applied voltage of 1.4 V to give [ H₄TTP ‐ Fc]⁺Cl^? and H⁺ [ (Cl)ZnTTP ‐ Fc]^? followed by nanospheres and crystalline 2D nanoflakes formation, confirmed by SEM and TEM images, by methanol vapor diffusion (MVD) approach. Moreover, X‐ray diffraction analysis suggest that protonated H₂TTP ‐ Fc aggregates exhibit amorphous nature, whereas H⁺ [ (Cl)ZnTTP ‐ Fc]^? depict crystalline nature from layer‐by‐layer arrangement of nanoflakes assisted by π–π stacking and ion‐dipole interactions.     

Efficient Synthesis of a Benzo[b]furan Building Block

Unexpected difficulty in the conversion of a bromobenzofuran to the corresponding formylbenzofuran led us to develop a new synthesis for 5-formylbenzo[b]furan-2-carbonitrile (1).     

Synthesis of an Anti-1,3-Diol Type Chiral Building Block

Duringthelastdecade,1,3-dioltypechiralbuildingbIocksofvariousconfigurationshavebeensynthesizedandappliedwidelyinthetotalsynthesisofnaturalpolyenemacrolideantibiotics1'2andla,25-dihydroxyvitaminD3analogues'.RecentlyWeigandandBrucker4synthesizedachiralbuildingblock(4R,6R)-2,2-dimethyl-5-tert-butyldip4-hydroxymethyl-l,3-dioxane1inlOsteps.Herein,wereportasyntheticrouteofnewbuildingblock(4S,6S)-2,2-dimethyl-5-tert-butyldip2,anenantiomerofl,startingfromreadilyavailableandinexpensiveD( )-xylose3i…     

室温下镀钯多壁碳纳米管对苯的气敏响应特性

在酸氧化后的多壁碳纳米管上化学还原镀钯,用水将镀钯后的碳管清洗至中性并配制成悬浊液,将悬浊液旋涂在真空溅射的叉指金电极表面,干燥后作为气敏膜,把气敏膜暴露于一定浓度的苯气体中,检测传感器的电流变化,并计算其灵敏度。镀钯后的多壁碳管在室温下对苯响应和回复迅速,电导变化与苯气体的浓度呈良好的线性关系,其线性回归方程y=0.0041x 0.1288,r=0.9546。Pd颗粒对苯分子和碳管壁结构缺陷间的电子转移的促进作用可能是多壁碳管镀钯后产生良好气敏响应的原因。     

Block Copolymer-Templated Synthesis and Organization of Semiconductor Nanocrystals

Summary: Templates formed by the self-assembly of amphiphilic block copolymers in selective solvents have been found to be instrumental in controlling critical parameters in semiconductor nanomaterials fabrication, including particle size, shape, and composition. These tunable nanoreactors exhibit rich polymorphism and have enabled the synthesis of a variety of nanostructures such as dots, wires, tubes, hollow spheres, and 2-D structures by growth-under-confinement at room temperature. The encapsulated particles have optical and electronic properties that are dependent upon physical dimensions and morphology, and exhibit inherent stability and functionalization flexibility, thus opening up promising prospects through their integration into functional optoelectronic and biological systems.     

Synthesis and Self-Assembly of Mixed-Graft Block Copolymers

Mixed-graft block copolymers (mGBCPs) consist of two or more types of polymeric side chains grafted on a linear backbone in a random, alternating, or pseudo-alternating sequence. They can phase-separate with the backbone serving as the interface of the blocks, and the side chains dominate their self-assembly behavior. mGBCPs are an accessible polymer architecture for exploring the idea of encoding polymer properties through the macromolecular architecture, as there are two distinct structural components that can be tuned: the backbone and the side chains. In this Concept article, the current literature on the synthesis of mGBCPs is reviewed, and the advantages and disadvantages of each synthetic method are noted. The self-assembly of mGBCPs is also discussed where possible. Finally, directions for future research on mGBCP synthesis and self-assembly are suggested.