钙钛矿型LaxSr1－xNi1－yCoyO3光电催化活性研究

用甘氨酸-硝酸盐燃烧合成法, 制备La_xSr_1－xNi_1－yCo_yO₃复合氧化物的陶瓷粉末, 对钙钛矿氧化物进行了XRD结构分析. 在通氧或不通氧下测试氧还原和氧析出的循环伏安曲线. 结果表明: 该氧电极具有双功能催化特性, 但不完全可逆. 利用汞灯作为激发光源, 进行几种水溶性染料和五种混合染料光解实验, 利用紫外-可见、红外以及人工神经网络光度法研究La_xSr_1－xNi_1－yCo_yO₃的催化性能. 结果表明: La_xSr_1－xNi_1－yCo_yO₃ (x＝0.7, 0.9, 1; y＝0.3, 0.75)复合氧化物都具有较强光催化特性; La_xSr_1－xNi_1－yCo_yO₃的光催化活性高于La_xSr_1－xNiO₃, 这与B位离子(Ni^2—, Co^2－)的电子构型有关; Co^2＋的加入可使La_xSr_1－xNiO₃的光催化活性有所提高.     

空气中合成固溶体荧光粉Ba2(Zn, Mg)Si2O7:Ce3+,Eu2+,Eu3+及其发光特性

采用高温固相法在空气中合成了Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu,yCe³⁺系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu²⁺离子的4f⁶5d¹-4f⁷跃迁,590~725 nm红光区窄带谱源于Eu³⁺的⁵D₀-⁷F_J (J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu³⁺在Ba_1.97-yZn_1-xMg_xSi₂O₇基质中被还原成了Eu²⁺;当x=0.1时,荧光粉Ba_1.97Zn_0.9Mg_0.1Si₂O₇:0.03Eu的绿色发光最强,表明Eu³⁺被还原成Eu²⁺离子的程度最大。当共掺入Ce³⁺离子后,形成Ba_1.97-yZn_0.9Mg_0.1Si₂O₇:0.03Eu,yCe³⁺荧光粉体系,其发光随着Ce³⁺离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba_1.96Zn_0.9Mg_0.1Si₂O₇:0.01Ce³⁺,0.03Eu的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba₂Zn_0.9Mg_0.1Si₂O₇基质中的能量传递与发光机理。     

CeCl3-CdCl2-H2O和CeCl3-CdCl2-HCl-H2O的相平衡

测定了三元系CeCl₃-CdCl₂-H₂O (25 ℃)和四元系CeCl₃-CdCl₂-HCl(～8.4％)-H₂O(25 ℃) 的相平衡溶度数据,绘制了相应的溶度图.该三元系是由5个固相区CdCl₂&;#8226;2.5H₂O(原始盐)、CdCl₂&;#8226;H₂O(原始盐)、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O、4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O、CeCl₃&;#8226;7H₂O(原始盐)组成的复杂体系.该四元系是由5个固相区CdCl₂&;#8226;H₂O(原始盐)、9CdCl₂&;#8226;CeCl₃&;#8226;19H₂O、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O、4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O、CeCl₃&;#8226;7H₂O(原始盐)组成的复杂体系.其中6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O在该三元系是介稳化合物.9CdCl₂&;#8226;CeCl₃&;#8226;19H₂O 、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O和4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O用X射线粉末衍射及TG-DTG和DSC等方法进行了研究,并对X射线粉末衍射进行了指标化.     

纳米钙钛矿LaxSr1-xFe1-yCoyO3复合氧化物的制备和表征

用甘氨酸-硝酸盐燃烧合成法，制备La_xSr_1-xFe_1-yCo_yO₃复合氧化物的陶瓷粉末，对该钙钛矿型氧化物进行了XRD、IR、紫外漫反射光谱及循环伏安曲线分析。结果表明：该复合氧化物粉体平均晶粒为15.3～29.8 nm,为立方和正交晶系。该氧电极具有双功能催化特性，但不完全可逆。对水溶液染料进行光解实验，利用紫外-可见、人工神经网络光度法研究La_xSr_1-xFe_1-yCo_yO₃的催化性能。结果表明：CO²⁺的加入可使La_xSr_1-xFeO₃的光催化活性有所提高，B位离子(Fe³⁺，CO²⁺)改变与加入，使La_xSr_1-xFe_1-yCo_yO₃(x=0.7，0.3；y=0.3，0.9，1)光催化活性高于La_xSr_1-xFeO₃。同时，对5种染料进行紫外光解，在0.75 h，脱色率大于91%，并为动力学一级反应。     

层状O2结构锂锰氧化物Li0.60[MgxCoyMn1-x-y]O2的制备及结构表征

本文采用离子交换法分别制备了双复合锂锰氧化物Li_0.60[Mg_xMn_1-x]O₂(0.05 ≤ x ≤ 0.15)和三复合锂锰氧化物Li_0.60[Mg_xCo_yMn_1-x-y]O₂(x=0.05，0.05 ≤      

La-Ce对PbTiO3陶瓷气相扩渗生成La2Ti6O15CeTi21O38的陶瓷材料及其电性能

报道了采用气相法对PbTiO₃陶瓷扩渗La-Ce混合稀土元素的研究. 在气相扩渗过程中, La, Ce与PbTiO₃陶瓷组元发生了复杂反应,生成了稀土化合物La₂Ti₆O₁₅和CeTi₂₁O₃₈, 制备出未见报道的La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料, 经测试其导电性能发生了十分显著的变化. La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料的室温电阻率从2.0 ×10¹⁰ W·m下降为0.248 W·m,而且随着温度的变化, 晶粒电阻呈现明显的PTCR效应,而晶界电阻随着温度的升高,呈急剧连续降低状态,总电阻的变化规律与晶界电阻的变化相一致, 试样总电阻的PTCR效应已不存在, 近趋导体. 经XPS测试分析, 进一步证实了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料中铅、钛等元素均有变价, 因而导致了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料电阻率的降低, 测试结果还首次给出了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料中各元素结合能位置的峰值. TG-DTA热分析表明La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料具有较好的高温热稳定性.     

o-ZrW1.6Mo0.4O8·H2O正交相的合成与表征

The precursor ZrW_1.6Mo_0.4O₇(OH)₂(H₂O)₂ was characterized by IR and XRD methods. δ′-ZrW_1.6Mo_0.4O₈ was prepared by careful controlling the annealing conditions from the precursor and was determined to have the formula as o-ZrW_1.6Mo_0.4O₈·H₂O by TG-DSC, IR, and XRD methods. The relation between o-ZrW_1.6Mo_0.4O₈·H₂O and o-ZrW_1.6Mo_0.4O₈ was discussed through variable temperature XRD patterns. Further more, the mechanism of the precursor dehydration was suggested.     

Bi2WO6量子点(QDs)修饰Bi2MoO6-xF2x异质结的构筑及其催化活性增强机理

采用简单沉积-沉淀法合成了Bi₂WO₆@Bi₂MoO_6-xF_2x（BWO/BMO6-xF2x）异质结,借助XRD、XPS、TEM、SEM、EDS、UV-Vis-DRS、PC和EIS等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征,并以模型污染物罗丹明B（RhB）的光催化降解作为探针反应来评价Bi₂WO₆@Bi₂MoO_6-xF_2x异质结的光催化活性增强机制。形貌分析表明,所得Bi₂MoO₆微球由大量厚度为20~50 nm的纳米片组成;FE-SEM和HR-TEM分析表明,尺寸约为10 nm的Bi₂WO₆量子点均匀沉积在Bi₂MoO_6-xF_2x微球表面,形成新颖的Bi₂WO₆@Bi₂MoO_6-xF_2x异质结;与纯Bi₂MoO₆或者Bi₂WO₆相比,1∶1Bi₂WO₆@Bi₂MoO_6-xF_2x异质结表现出更好的光催化活性和光电流性质,其对RhB光催化降解的表观速率常数分别为纯BMO和BWO的6.4和11.6倍。PC和EIS图谱分析表明,Bi₂WO₆量子点表面沉积显著提高Bi₂MoO_6-xF_2x光生电子/空穴的分离效率和迁移速率;活性物种捕获实验证明了·O₂^-和h⁺是主要的活性物种。根据实验结果,探讨了F^-掺杂和Bi₂WO₆量子点之间的协同效应对Bi₂MoO₆的光催化活性的影响机制。     

298.15 K Li2B4O7-MgCl2-H2O体系热力学性质的电动势法测定及离子相互作用模型的研究

测定了298.15 K下, 无液接电池Li-ISE│Li₂B₄O₇ (m_A)(aq.), MgCl₂(m_B)(aq.)│AgCl/Ag的电动势, 利用测定结果计算了Li₂B₄O₇-MgCl₂-H₂O体系离子强度在0.05～3 mol•kg^－1范围内, 不同MgCl₂离子强度分数的溶液中LiCl的平均活度系数, 并给出了其随离子强度I, B₄O₇^2－和Mg^2＋浓度的变化规律. 结合以往关于该体系和Li₂B₄O₇-LiCl-H₂O, Li₂B₄O₇-H₂O体系的等压研究结果, 用迭代和多元线性回归方法对Li^＋-Mg^2＋-Cl^－-B₄O₇^2－-H₂O体系的离子相互作用模型进行了研究. 具体方法为考虑了该体系在不同的总硼浓度范围H₃BO₃, B(OH)₄^－, B₃O₃(OH)₄^－和B₄O₅(OH)₄^2－四种含硼化合物的存在以及各硼化合物间的化学平衡, 以修正了的Pitzer渗透系数方程和活度系数方程为基础, 对该体系的等压法和电动势法研究结果进行最小二乘拟合, 拟合的标准偏差为0.0167, 用该模型计算的该体系的渗透系数、活度系数与实验值基本一致.     

由大环配体[As4W40O140]28-与NiII形成的新型超大杂多化合物

在pH = 4.0的水溶液中, NiCl₂·6H₂O, NH₄Cl与Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O反应, 得到了新的杂多砷钨酸盐(NH₄)₂₀[Na₂(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·61H₂O单晶, 用X射线单晶衍射法及元素分析确定了其结构, 晶体属三斜晶系, P¹空间群; 其晶胞参数为: a = 1.33135(18), b = 1.9722(3), c = 3.6430(5) nm, α = 78.010(2)°, β = 82.145(2)°, γ = 74.385(2)°, V = 8.978(2) nm3, Z = 2, R1 = 0.0512, wR2 = 0.0684 (I > 2σ). 在聚阴离子[Na₂(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]^20-中, 2个Ni²⁺和2个Na⁺分占大环配体[As₄W₄₀O₁₄₀]^28-内的4个S2空位, 每个S2位提供4个O_d向金属离子配位, 2个Ni²⁺的配位数为6, 两个Na⁺的配位数分别为5和6, 另一个Ni²⁺处于环外, 与[As₄W₄₀O₁₄₀]^28-的一个端基氧(O_d)桥连成键, 其配位数为6.     

电子效应对单取代苯定位效应和反应活性的影响

单取代苯的定位效应和反应活性主要受取代基的电子效应控制,列表总结了取代基的电子效应与定位效应和反应活性的关系,分析了烃基电子效应的特殊性,取代基具有-Ⅰ效应的普遍性。除卤素取代基外,探讨了共轭效应的方向对定位效应和反应活性的决定作用。     

Kinetic Studies of Solvent and Pressure Effects on the Thermal Isomerization of Palladium Dithizonate

IntroductionThe photo-and thermo-chromisms of organometallic compounds have been intensivelystudied during thelast1 0 years.Meriwetheretal.[1 ,2 ] examined the chromic behaviorofmet-al-dithizone(phenyldiazenecarbothionic acid2 -phenylhydrazide) complexesin detail.From thekinetic and infrared studies,they showed thatthe central metal of a dithizonate complex de-termined the photochemical stability,the rate of the thermal return reaction,and the colorofthe dithizonate complex.As reported by Mer…     

环糊精聚合物的高分子效应

环糊精以其独特的包络性能而引人注目, 现已广泛应用于色谱分离、选择性合成的催化剂、食品、医药及农药等多种领域。环糊精聚合物被证实亦具有包络、缓释及催化的能力, 以及较好的机械强度和化学稳定性。目前环糊精聚合物主要应用在色谱分离、空气净化和食品工业等方面。本文综述了环糊精高分子化后所表现出的高分子效应, 为环糊精聚合物的合成和应用提供参考。     

Heavy Atom Effect on the First Hyperpolarizabilities of Squaric Acid Homologues Studied by Ab Initio and DFT Methods

1 INTRODUCTION In the past decades, there have been great efforts to research on the molecules nonlinear opti- cal (NLO) properties in which theoretical calcu- lation[1～3] became a powerful tool because it not only explains the micro-mechanism of the mo…     

Ab Initio and Density Functional Study on the First Hyperpolarizabilities of Squaric Acid Homologues

The first hyperpolarizabilities of four squaric acid homologues: squaric acid, 1,2-dithiosquaric acid,1,2-diselenosquaric acid and 1,2-ditellurosquaric acid have been calculated using ab initio and DFT methods. The effects of equilibrium geometries, basis set and electron correlation on the first hyperpolarizabilties of these molecules were investigated. The frequency dispersion effect and solvent effect, which are essential to get reliable outputs in comparison to the experimental results, have also been explored. On the basis of these investigations, it is worthy to point out that the heavy atom effect takes effect for these squaric acid homologues.     

Optimization of Naringenin Nanoparticles to Improve the Antitussive Effects on Post-Infectious Cough

Naringenin (NRG) is a natural compound with several biological activities; however, its bioavailability is limited owing to poor aqueous solubility. In this study, NRG nanoparticles (NPs) were prepared using the wet media milling method. To obtain NRG NPs with a small particle size and high drug-loading content, the preparation conditions, including stirring time, temperature, stirring speed, and milling media amount, were optimized. The NRG (30 mg) and D-α-tocopherol polyethylene glycol succinate (10 mg) were wet-milled in deionized water (2 mL) with 10 g of zirconia beads via stirring at 50 °C for 2 h at a stirring speed of 300 rpm. As a result, the NRG NPs, with sheet-like morphology and a diameter of approximately 182.2 nm, were successfully prepared. The NRG NPs were stable in the gastrointestinal system and were released effectively after entering the blood circulation. In vivo experiments indicated that the NRG NPs have good antitussive effects. The cough inhibition rate after the administration of the NRG NPs was 66.7%, cough frequency was three times lower, and the potential period was 1.8 times longer than that in the blank model group. In addition, the enzyme biomarkers and histological analysis results revealed that the NRG NPs can effectively regulate the inflammatory and oxidative stress response. In conclusion, the NRG NPs exhibited good oral bioavailability and promoted antitussive and anti-inflammatory effects.     

药物化学中的大分子效应※

药物种类按照分子量来划分可以分为小分子药物(自然提取或化学合成的)和大分子药物(生物制剂). 尽管目前小分子药物仍然是市场的主流, 但其研发增速趋缓, 而大分子药物在药物研发中的地位日渐突显, 并被预期在未来药物市场中占据越来越高的份额. 除了生物制剂大分子药物, 将小分子药物与天然或合成大分子结合制备得到的化学合成大分子药物, 近年来受到药物研究者们越来越多的关注. 由于大分子具有丰富的骨架结构及空间构架, 其所特有的骨架效应、多价效应, 以及通过分子组装而产生的聚集效应和靶向效应等, 能够为药物化学的设计带来更多新的可能. 有鉴于此, 本综述将简略介绍药物化学设计中的大分子效应, 重点讨论合成大分子的骨架效应、多价效应、聚集效应和靶向效应等为药物化学设计所带来的新性能. 通过对药物化学中大分子效应所带来的优势、问题和重要研究进展的探讨, 以期能够推动化学合成大分子药物的发展, 为药物化学设计提供新的思路.     

Magnetic Field and Magnetic Isotope Effects upon Reactions of Heavy Atom-Centered Radicals

We present our recent studies on magnetic field effects (MFEs) observed in reactions of heavy atom-centered radicals such as Si-,P-, Ge-, and Sn-radicals with a ns-laser photolysis technique under magnetic fields of 0–10 T. Although the MFES of heavy atom-centered radicals are much smaller than those of C-radicals due to the spin-orbit interaction of heavy atoms, we have found appreciable MFEs in many reactions of such heavy atom-centered radicals. Comparing the MFES of C-radicals with those of heavy atom-centered ones, we have explained the MFEs of heavy atom-centered radicals in terms of the Δg and relaxation mechanisms. We have found that the separation between the MFES due to the Δg mechanism and those due to the relaxation one is possible with the enhancement of spin relaxation by the addition of a paramagnetic ion. We have also tried to enrich magnetic isotopes of heavy atoms with the magnetic isotope effect (MIE), using the reactions which show fairly large MFES. Recently, we have succeeded in enriching ⁷³Ge. This is the heaviest isotope which has so far been enriched with the MIE from samples of natural abundance.     

NQR parameters of complexes and polarizability effect

The literature data on substituent influence on the nuclear quadrupole resonance frequencies (ν), quadrupole coupling constants (e²Qq ? h^{? 1}), and asymmetry parameters (η) for 36 series of the H‐complexes, charge–transfer complexes, transition metal complexes and other donor–acceptor complexes have been considered, using the correlation analysis. Generally the ν, e²Qq ? h^{? 1}, and η values were first established to depend on the inductive, resonance, polarizability, and steric effects of substituents. The presence or otherwise of certain effects as well as relation between their contributions are determined by the type of series. The polarizability effect owes its existence to the appearance of an excess charge on the indicator centre as a result of the complexation. The contribution of this effect ranges up to 75%. Copyright © 2012 John Wiley & Sons, Ltd.     

Thorpe-Ingold效应及其在有机成环反应中的应用

本文首先介绍了Thorpe-Ingold效应及其相关理论和实验研究进展,然后综述了近年来Thorpe-Ingold效应在形成三、四、五和六元环产物的环化反应中的应用。Thorpe-Ingold效应可以有效地促进分子内和分子间环化,提高环化的产率和速率。该效应主要通过空间效应、电子效应或者两者协同起作用,在某些情况下,该效应还会受催化剂和溶剂等影响。利用该效应可以促使一些难以发生的环化反应顺利进行,并能获得较好的产率。