Supermacroporous hydrophobic affinity sorbents for penicillin acylase purification

Penicillin acylase (PA, EC 3.5.1.11) is used as a raw material in the production of semi-synthetic penicillins. Although there are many methods for PA purification, affinity chromatography is advantageous as it provides efficient one step purification. In this study, poly(2-hydroxyethyl methacrylate) based cryogel column containing hydrophobic N-methacryloyl-L-tryptophan (MATrp) functional monomer as a ligand was prepared. Interaction of MATrp with amino acids in PA structure is the basis of hydrophobic interaction chromatography in this study. PHEMA and PHEMATrp cryogel columns were characterized by surface area measurements, infrared spectroscopy, swelling tests, elemental analysis and scanning electron microscopy (SEM). Initial PA concentration, pH, effect of temperature, amount of ligand, flow rate, ionic strength and time on PA adsorption on PHEMATrp cryogel were investigated. Optimum pH was determined as 5.0 for PA adsorption and maximum adsorption capacity was obtained as 6.40 mg/g. It was observed that adsorption capacity increased with the increasing of temperature. Also, PA adsorption increased up to 0.25 M salt concentration and decreased in higher salt concentrations. Data obtained in this affinity system suggests that hydrophobic interactions are dominant. In the last stage of the study, PA was purified from Penicillium chrysogenum with 76.3% yield and 332.3 purification factor.     

Magnetic dye affinity beads for the adsorption of beta-casein

Casein is well known as a good protein emulsifier and beta-casein is the major component of casein and commercial sodium caseinate. Dye affinity adsorption is increasingly used for protein separation. beta-Casein adsorption onto Reactive Red 120 attached magnetic poly(2-hydroxyethyl methacrylate) (m-PHEMA) beads was investigated in this work. m-PHEMA beads (80-120 microm in diameter) were produced by dispersion polymerization. The dichlorotriazine dye Reactive Red 120 was attached covalently as a ligand. The dye attached beads, having a swelling ratio of 55% (w/w) and carrying different amounts of Reactive Red 120 (9.2 micromol . g(-1)-39.8 micromol . g(-1)), were used in beta-casein adsorption studies. The effects of the initial concentration, pH, ionic strength and temperature on the adsorption efficiency of dye attached beads were studied in a batch reactor. The non-specific adsorption on the m-PHEMA beads was 1.4 mg . g(-1). Reactive Red 120 attachment significantly increased the beta-casein adsorption up to 37.3 mg . g(-1). More than 95.4% of the adsorbed beta-casein was desorbed in 1 h in a desorption medium containing 1.0 M KSCN at pH 8.0. We concluded that Reactive Red 120 attached m-PHEMA beads can be applied for beta-casein adsorption without significant losses in the adsorption capacities.     

A novel molecularly imprinted method with computational simulation for the affinity isolation and knockout of baicalein from Scutellaria baicalensis

A novel molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization with baicalein (BAI) as the template and used as solid‐phase extraction (SPE) adsorbent, aiming at the affinity isolation and selective knockout of BAI from Scutellaria baicalensis Georgi (SB). We used computational simulation to predict the optimal functional monomer, polymerization solvent and molar ratio of template to functional monomer. Characterization and performance tests revealed that MIP exhibited uniform spherical morphology, rapid binding kinetics, and higher adsorption capacity for BAI compared with nonimprinted polymer (NIP). The application of MIP in SPE coupled with high‐performance liquid chromatography to extract BAI from SB showed excellent recovery (94.3%) and purity (97.0%). Not only the single BAI compound, but also the BAI‐removed SB extract was obtained by one‐step process. This new method is useful for isolation and knockout of key bioactive compounds from herbal medicines. Copyright © 2015 John Wiley & Sons, Ltd.     

Characterization of a peptide affinity support that binds selectively to staphylococcal enterotoxin B

The influences of mass transfer and adsorption-desorption kinetics on the binding of staphylococcal enterotoxin B (SEB) to an affinity resin with the peptide ligand, Tyr-Tyr-Trp-Leu-His-His (YYWLHH) have been studied. The bed and particle porosities, the axial dispersion coefficient and the pore diffusivity were measured using pulse experiments under unretained conditions. Adsorption isotherms for SEB on YYWLHH resins with peptide densities in the range from 6 to 220 micromol/g were measured and fitted to a bi-Langmuir equation. At peptide densities below 9 micromol/g and above 50 micromol/g, dissociation constants were lower (2 x 10(-3) to 7 x 10(-3) mol/m3), and binding capacities were larger (43-47 mg SEB/g). In the range from 9 to 50 micromol/g dissociation constants were larger (13 x 10(-3) to 24 x 10(-3) mol/m3) and capacities were lower (33-37 mg SEB/g). These observations are consistent with a transition from single point attachment of the protein to the ligand at low peptide densities to multipoint attachment at high peptide densities. The general rate (GR) model of chromatography was used to fit experimental breakthrough curves under retained conditions to determine the intrinsic rate constants for adsorption, which varied from 0.13 to 0.50 m3 mol(-1) s(-1), and exhibited no clear trend with increasing peptide density. An analysis of the number of transfer units for the various mass transfer steps in the column indicated that film mass transfer, pore diffusion (POR) and the kinetics of adsorption can all play an important role in the overall rate of adsorption, with the intrinsic adsorption step apparently being the rate determining step at peptide densities below 50 micromol/g.     

Target-selective ion-exchange media for highly hydrophilic compounds: a possible solution by use of the “interval immobilization technique”

We prepared a crosslinked polymer as a separation and/or adsorption medium for CYN, as shown in Fig. 1. The polymers were evaluated by high-performance liquid chromatography (HPLC) and adsorption was examined under batch conditions. Results from detailed HPLC evaluation and measurement of the difference between the binding affinity for CYN and for other compounds showed the prepared polymer had specific recognition ability for CYN.     

批量法研究牛γ-球蛋白在尼龙亲和膜上的等温吸附行为

以尼龙膜为基质,L－色氨酸（Trp)为配基,合成了一种新的亲和介质用以吸附牛γ-球蛋白（BGG）。用批量法系统考察了温度、离子强度和pH以亲和等温吸附的影响。研究结果表明,BCG与氨基酸之间的亲和相互作用力主要是静电力和疏水相互作用力。在最适条件下吸附遵循Langmuir型吸附,并且亲和吸附量最大而非特异性吸附最小。偏离该条件则会发生在蛋白质在膜上的堆积,蛋白质构型变化及蛋白质与配基间的空间取向的变化,从而使吸附不再遵循Langmuir型吸附。     

Microchip extraction of catecholamines using a boronic acid functional affinity monolith

A novel solid phase extraction microchip with a boronic acid functional affinity monolithic disc was developed in this work. Vinyl phenylboronic acid–ethylene glycol dimethacrylate co-polymer monoliths, which have pore sizes up to 20 μm, were investigated for extraction of catecholamines using adsorption and desorption studies in a batch system. Desorption yields of greater than 90% were achieved for catecholamines at pH 3 and below. Monolithic discs were then formed in chambers in borofloat glass microfluidic chips using in situ UV polymerization. Adsorption on the monolithic discs was performed via electrokinetic flow, with catecholamines determined via laser-induced native fluorescence (LINF) detection following electrokinetic elution. Microchips containing the boronic acid functional polymer discs worked well for extraction of catecholamines, providing greater than 100 fold concentration enrichment. This study demonstrated that a solid phase extraction microchip, containing an easily prepared monolith disc, will be useful for boronate affinity extraction of cis-diol containing compounds.     

Chromatographic behaviour of monoclonal antibodies against wild-type amidase from Pseudomonas aeruginosa on immobilized metal chelates

The aim of this work was to devise a one‐step purification procedure for monoclonal antibodies (MAbs) of IgG class by immobilized metal affinity chromatography (IMAC). Therefore, several stationary phases were prepared containing immobilized metal chelates in order to study the chromatographic behaviour of MAbs against wild‐type amidase from Pseudomonas aeruginosa. Such MAbs adsorbed to Cu(II), Ni(II), Zn(II) and Co(II)–IDA agarose columns. The increase in ligand concentration and the use of longer spacer arms and higher pH values resulted in higher adsorption of MAbs into immobilized metal chelates. The dynamic binding capacity and the maximum binding capacity were 1.33 ± 0.015 and 3.214 ± 0.021 mg IgG/mL of sedimented commercial matrix, respectively. A K_D of 4.53 × 10⁻⁷ m was obtained from batch isotherm measurements. The combination of tailor‐made stationary phases of IMAC and the correct selection of adsorption conditions permitted a one‐step purification procedure to be devised for MAbs of IgG class. Culture supernatants containing MAbs were purified by IMAC on commercial‐Zn(II) and EPI‐30–IDA–Zn(II) Sepharose 6B columns and by affinity chromatography on Protein A‐Sepharose CL‐4B. This MAb preparation revealed on SDS–PAGE two protein bands with M_r of 50 and 22 kDa corresponding to the heavy and light chains, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Purification of neutral protease by dye affinity chromatography

Twenty triazinic dyes were assayed as ligands for the chromatographic affinity purification of a neutral protease from Flavourzyme^™, a commercial preparation. Screening at pH 4.0 allowed the selection of eight dyes on the basis of their high protease adsorption. When the pH was set to 5.0 in order to increase selectivity, only Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A maintained protease adsorption at high values. Neither maximum capacities nor dissociation constants calculated from isotherms measured at 8 and 25°C showed great differences. By contrast, a strong temperature effect was evidenced in the elution step: elution at 8°C allowed 70, 81, and 98% recovery of adsorbed protease with Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A, respectively, whereas only 20% recovery was attained at 25°C. Based on the results obtained, a purification process for the neutral protease contained in Flavourzyme with Cibacron Blue F3G-A as the affinity ligand was developed, yielding 96% of electrophoretically pure enzyme in a single step, the specific activity rising from 850 to 3650 U/mg.     

Analysis of protein adsorption on regenerated cellulose-based immobilized copper ion affinity membranes

Immobilized metal affinity membranes (IMAMs) were prepared by immobilizing copper ions on microporous regenerated cellulose membranes through different types of chelating agents (dentate and triazine dye). The resulting chelator utilization percentages were 95% for iminodiacetic acid, 56% for N,N,N-tris(carboxymethyl)ethylenediamine, 52% for Cibacron blue 3GA, and 140% for Cibacron red 3BA. On the other hand, triazine dyes were slightly superior to dentate chelators on metal ion utilization for protein adsorption. In batch single-protein adsorptions, the protein adsorption capacity decreased with increasing molecular size and number of accessible surface histidine residues [lysozyme>bovine serum albumin(BSA)>gamma-globulin], while the binding strength order was the opposite (gamma-globulin>BSA>lysozyme). Moreover, the proportions of specific and nonspecific bindings were evaluated by varying pH and salt concentration conditions. A large fraction of the adsorption capacity was found to come from the nonspecific interactions for the prepared IMAMs. Lastly, batch three-protein adsorptions were performed and weak adsorption competition was observed.     

Characterization of p-aminobenzamidine-based sorbent and its use for high-performance affinity chromatography of trypsin-like proteases

An affinity sorbent, hydrophilic polymer-based carrier of different pore size (Toyopearl) with immobilized p-aminobenzamidine (ABA), has been prepared. Its basic properties and some applications for protein purification were studied. ABA, which is a synthetic inhibitor for trypsin-like proteases, was covalently immobilized to Toyopearl by reductive amination. The ligand density and binding capacity for porcine trypsin varied depending on the pore size of Toyopearl. The maximum binding capacity of the immobilized p-aminobenzamidine Toyopearl (ABA-Toyopearl) for trypsin was more than 40 mg/ml gel. ABA-Toyopearl thus obtained was very stable below pH 8 and was successfully used for high-performance affinity chromatography of trypsin-like proteases such as trypsin, thrombin, tissue-type plasminogen activator or urokinase in a single step at 25 degrees C.     

Membrane-based receptor affinity chromatography.

Membrane-based receptor affinity chromatography (MRAC), which utilizes the molecular recognition between an immobilized receptor and its soluble protein ligand, has been developed for the purification of human interleukin-2 and related biomolecules. The multi-purpose affinity membrane used in this study consisted of a soluble form of interleukin-2 receptor (IL-2R) chemically bonded to hollow-fiber membranes in an oriented fashion. A model system involving anti-Tac-H (a humanized monoclonal antibody to IL-2R) was used to study the important factors influencing the performance of MRAC, including support morphology, mass transfer rate and adsorption kinetics. All three are shown to be highly efficient. MRAC has been successfully applied to the purification of anti-Tac-H, recombinant human interleukin-2 (rIL-2) and interleukin 2-Pseudomonas exotoxin fusion protein (IL2-PE40). Overall, MRAC was found to be a viable, scalable and extremely productive affinity purification method.     

Design and synthesis of affinity ligands and relation of their structure with adsorption of proteins

Affinity chromatography has played an increasingly important role both in the pharmaceutical industry and academic research. In the present study, we report our preliminary investigation on the relationship between the affinity ligand structure and its adsorption to multi-protein samples. The structure of the ligands, including the size of the ring (cyclic group) and the length of the chain (linear group), has a great impact on the adsorption of ligands to proteins. Meanwhile, the functional groups that the ligands carry are also closely related to the adsorption of ligands to proteins. This research provides good guidance for the design and synthesis of affinity materials in affinity chromatography. It is also useful to other protein-ligand interaction-related research.     

New alpha-amino phenylalanine tetrazole ligand for immobilized metal affinity chromatography of proteins

A new chelating compound has been developed for use in the immobilized metal affinity chromatographic (IMAC) separation of proteins. The bidentate ligand, alpha-amino phenylalanine tetrazole, 4, was synthesized via a five-step synthesis from N-fluorenylmethoxycarbonyl phenylalanine and then immobilized onto silica through the epoxide coupling procedure. The binding behavior of the resulting IMAC sorbent, following chelation with Zn2+ to a density of 183 micromol Zn2+ ions/g silica, was characterized by the retention of proteins in the pH range of 5.0-8.0, and by the adsorption behavior of lysozyme with frontal chromatography at pH 6.0 and 8.0. The prepared column showed the separation ability to four test proteins and the retention time of these proteins increased with an increase in pH. From the derived isotherms, the adsorption capacity, qm, for the binding of lysozyme to immobilized Zn2+-alpha-amino phenylalanine tetrazole-silica was found to be 1.21 micromol/g at pH 6.0 and 1.20 micromol/g sorbent at pH 8.0, respectively, whilst the dissociation constants KD at these pH values were 5.22x10(-6) and 3.49x10(-6) M, respectively, indicating that the lysozyme was retained more stable under alkaline conditions, although the binding capacity in terms of micromole protein per gram sorbent remained essentially unchanged.     

Affinity of trypsin for amidine derivatives immobilized on dextran-coated silica supports.

The pancreas contains two very analogous enzymes: trypsin and chymotrypsin. These two enzymes are very similar in their physicochemical characteristics and are therefore quite difficult to separate by classical purification procedures. They constitute a good model for affinity chromatography. It was previously demonstrated that amidine derivatives are able to interact strongly and specifically with these serine proteases and are often used as ligand in affinity chromatography. To understand the trypsin interaction mechanism, we synthesized different amidines and immobilised them with or without spacer arm on silica beads previously coated by dextran substituted with a calculated amount of positively charged diethylaminoethyl functions, in order to minimize the non-specific interactions of silanol groups of the silica material. First the affinity constant and the adsorption capacity of these supports for trypsin were determined in batch procedures, then they were used in affinity chromatography. The effects of ionic strength, pH and competitive inhibitors on proteins desorption were also studied. Last, to demonstrate the importance of passivation, the chromatographic performances of dextran-coated silica phases and a commercial support grafted with the same amidine were compared.     

Calcium-modulated conformational affinity chromatography. Application to the purification of calmodulin and S100 proteins.

The purification of proteins by affinity chromatography is based on their highly specific interaction with an immobilized ligand followed by elution under conditions where their affinity towards the ligand is markedly reduced. Thus, a high-degree purification by a single chromatographic step is achieved. However, when several proteins in the crude mixture share affinity to a common immobilized ligand, they may not be resolved by affinity chromatography and subsequent "real" chromatographic purification steps may be required. It is shown that by using properly selected gradient elution conditions, the affinities of the various proteins towards the immobilized ligand may be gradually modulated and their separation may be achieved. This is exemplified by the isolation and separation of a group of Ca(2+)-activated proteins, Calmodulin, S100a and S100b, from bovine brain extract, using a melittin-Eupergit C affinity column which is developed with Ca(2+)-chelator gradients. As expected, separation of the three proteins into individual peaks, eluted in order of increasing affinity to the matrix, was obtained. Sigmoid selectivity curves calculated from the elution volumes under different elution conditions for each of the proteins were obtained, illustrating the chromatographic behaviour of the gradient affinity separation system.     

Imidazole—a new ligand for metal affinity precipitation

Kunitz soybean trypsin inhibitor (STI) was specifically coprecipitated during precipitation of Cu(II)-loaded copolymers induced by increase in temperature and ionic strength. The copolymers used consisted of 1-vinylimidazole andN-vinylcaprolactam orN- isopropylacrylamide. The elution of STI was achieved by solubilization of the STI-Cu(II)-polymer complex in the presence of an excess of the competing ligand, imidazole, and a subsequent precipitation of the polymer with STI remaining free in solution in a purified form as judged by Sodium dodecylsulfate-polyacrylamide gel electrophoresis (SDS-PAGE). To the best of our knowledge this is the first reported successful metal affinity precipitation of protein in a heterobifunctional format.     

Cyanogen bromide activation and coupling of ligands to diol-containing silica for high-performance affinity chromatography optimization of conditions

To obtain silica supports for high-performance affinity chromatography, a method of preparing CNBr-activated diol-silica under anhydrous conditions was developed. Activation of the silane-derived hydroxyls with cyanogen bromide and triethylamine was optimized and demonstrated to efficiently couple several amino ligands (tryptophan, 6-aminohexyl-Cibacron Blue, and DNA). Sonication and vacuum degassing, a procedure used to remove air from the silica beads, increased activation. Coupling of an amino ligand under slightly basic conditions (pH 8.0) gave the highest yield. The linkage between the immobilized ligands and silica was stable from pH 2-10. Anhydrous acetone was the most effective solvent for activation but dimethylformamide and 2-propanol were also good choices. The high-performance affinity chromatography columns obtained by coupling sequence-specific DNA binding sequences for Lac repressor-beta-galactosidase fusion protein were compared to affinity columns obtained by coupling the same DNA element to Sepharose beads; 5 microm silica gave the best performance.     

Immobilized metal ion affinity electrophoresis. A study with several model proteins containing histidine.

Immobilized metal ion affinity electrophoresis (IMA-Elec) is one among the many methods derived from the immobilized metal ion affinity chromatography. Two approaches for incorporating the metal ligand, were studied. One was in the form of insoluble particulate material based on Sepharose 6B and the other in the form of soluble polymer based on polyethylene glycol (PEG) 5000. Both the polymers coupled with iminodiacetate and metallized with copper or zinc were used as ligands, incorporated into soluble agarose as the electrophoretic gel. Several histidine-containing model proteins were studied with both the systems and their metal binding strengths were determined as the dissociation constants, Kd. The results clearly demonstrated that the mechanism of protein recognition by immobilized copper or zinc via the accessible histidyl residues was maintained in the IMA-Elec system. Proteins with increasing numbers of histidine residues showed increasing binding strength (lower Kd values). While this basic mechanism was conserved, the supporting polymers (Sepharose 6B and the PEG 5000) showed significant differences in the metal binding to the protein. The polysaccharide Sepharose 6B enhanced the binding strength compared with PEG 5000. The optimum electrophoretic parameters were determined to be current intensities up to 20 mA and pH ca. 7.0. At pH greater than 8.0, a significant decrease in the affinity was observed, this decrease being greater with PEG 5000 than Sepharose 6B as supporting material.     

Temperature-responsive stationary phase utilizing a polymer of proline derivative for hydrophobic interaction chromatography using an aqueous mobile phase

A new method of chromatography is proposed, utilizing a thermo-responsive polymer carrying an amino acid ester residue for the stationary phase of high-performance liquid chromatography (HPLC). We have been investigating the new concept of chromatography, a temperature-responsive chromatography, using temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm)-modified surface for HPLC with a constant aqueous media as the mobile phase. In this study, we designed and synthesized thermo-responsive poly(acryloyl-L-proline methyl ester) and its copolymer with N-isopropylacrylamide (NIPAAm). Homopolymers of acryloyl-L-proline methyl ester and copolymer were prepared by the reaction of radical telomerization. These polymers underwent a reversible phase transition from water-soluble forms into aggregates by changing the temperature, similar to PNIPAAm. The surface properties and functions of stationary phases modified with poly(acryloyl-L-proline methyl ester) were controlled by the external temperature. In the chromatographic system, we separated steroids and amino acids with a variety of hydrophobicities using a sole aqueous mobile phase. In contrast to a PNIPAAm-modified surface, a poly(acryloyl-L-proline methyl ester)-modified surface showed a greater affinity for hydrophobic amino acids.