CMC系列高分子表面活性剂的胶束形态

高分子表面活性剂分子量高 ,分子中兼具亲水和疏水链段 ,在选择性溶剂水中同小分子表面活性剂一样 ,可形成疏水链段为核心、亲水链段为外壳的胶束结构 ,但高分子量又使其表现出许多不同于低分子表面活性剂的形态特征 ,如胶束的多种形态、尺寸分布多分散性等等 ,而这些形态特征对高分子表面活性剂的界面活性、增粘、乳化等性能有决定性的影响．结构规整的嵌段或接枝共聚物在选择性溶剂中的分子聚集形态已有研究 ［１,２］,亲水亲油性的高分子表面活性剂在水溶液中由于结构复杂、水溶液中氢键作用及静电作用力等因素造成的困难 ,因而研究较少…     

PEO-PPO聚醚嵌段共聚物的表面活性及其在溶液界面的结构

利用和频振动光谱及表面张力测定技术对两亲性聚氧乙烯-聚氧丙烯(PEO-PPO)表面活性剂的表面活性及溶液界面结构进行了研究。结果表明:疏水PPO链段在溶液界面吸附并紧密排列是溶液表面张力降低的主要原因。增加溶液浓度、增大共聚物链内PPO与PEO聚合度比值可增加高分子链在界面的吸附,并使PPO在界面紧密排列,侧基(甲基)有序取向。另外,PPO在分子链中的位置也对这一行为产生影响,PPO位于分子链两端时的结构更有利于PPO在表面紧密堆积,降低界面高分子链间相互作用,减小溶液表面张力。     

胶束催化2,4--二硝基氯苯碱水解反应动力学研究

表面活性剂分子具有两亲基团,可在水溶液界面上发生吸附、定向排列以及在内部形成胶束等,因可明显地降低界面张力,因而具有调节润湿,增溶,乳化,洗涤,去污,起泡,消泡等功能,同时胶束的形成,还具有加快反应,提高反应专一性的作用[1].目前表面活性剂不仅广泛地应用于生产、生活的诸多领域,同时对交叉学科的发展也起着特殊的作用.其中由于胶束产生的局部浓集效应、静电效应和微环境效应等,不仅使一些在水溶液中难以进行的反应,如长链酯水解,高分子聚合等得以加速,同时还可模拟某些生物酶研究复杂的生理反应[2-4].研究并应用胶束的催化作用,已成为化学动力学十分活跃并有广泛应用前景的研究领域.但与此不相适应的是,基础物理化学实验中几乎没有相关的实验内容,为此本文研究了胶束催化2,4--二硝基苯碱水解反应动力学,论文内容可引入物理化学教学实验中.     

Gemini表面活性剂对疏水缔合聚丙烯酰胺界面吸附膜扩张流变性质的影响

采用小幅低频振荡和界面张力弛豫技术, 考察了疏水缔合水溶性聚丙烯酰胺(HMPAM)在正癸烷-水界面上的扩张黏弹性质, 研究了不对称Gemini表面活性剂C₁₂COONa-p-C₉SO₃Na对其界面扩张性质的影响. 研究发现, 疏水链段的存在, 使HMPAM在界面层中具有较快的弛豫过程, 扩张弹性显示出明显的频率依赖性. 表面活性剂分子可以通过疏水相互作用与聚合物的疏水嵌段在界面上形成类似于混合胶束的特殊聚集体. 表面活性剂分子与界面聚集体之间存在快速交换过程, 可以大大降低聚合物的扩张弹性. 同时, 聚合物分子链能够削弱表面活性剂分子长烷基链之间的强相互作用, 导致混合吸附膜的扩张弹性远低于单独表面活性剂吸附膜.     

扩张流变法研究表面活性剂在界面上的聚集行为

近年发展起来的界面流变测定技术在研究界面性质方面具有许多独特之处.本文结合我们的工作,总结了近年来有关该技术在表面活性剂界面聚集行为研究中的应用,讨论了扩张频率、表面活性剂浓度及疏水链长、无机盐和温度对表面扩张流变行为的影响,同时探讨了小分子表面活性剂与高分子表面活性剂表面扩张流变行为的区别以及小分子表面活性剂在气/液界面与液/液表面的扩张流变性的差异.大量研究表明,借助于界面流变性的测定不仅可以研究发生在界面上和界面附近的微观弛豫过程,而且可以探讨界面上超分子聚集体的形成,进而为乳状液和泡沫等分散体系的稳定性提供依据.     

高分子表面活性剂在固/液界面上的吸附形态

采用紫外光谱、XPS研究了羧甲基纤维素型高分子表面活性剂在硅胶 /水界面上的吸附形态 ,结果表明随着高分子表面活性剂溶液浓度增大 ,分子在硅胶表面的吸附由单层逐渐变为多层 ,生成半胶束结构 .     

支链化阳离子和甜菜碱表面活性剂对聚四氟乙烯表面润湿性的影响

利用座滴法研究了支链化阳离子表面活性剂十六烷基羟丙基氯化铵(C₁₆GPC)和两性离子表面活性剂十六烷基羧酸甜菜碱(C₁₆GPB)在聚四氟乙烯(PTFE)表面上的吸附机制和润湿性质, 考察了表面活性剂浓度对表面张力、接触角、粘附张力、固液界面张力和粘附功的影响趋势. 研究发现, 低浓度条件下, 表面活性剂疏水支链的多个亚甲基基团与PTFE表面发生相互作用, 分子以平躺的方式吸附到固体界面; 支链化表面活性剂形成胶束的阻碍较大, 浓度大于临界胶束浓度(cmc)时, C₁₆GPC和C₁₆GPB分子在固液界面上继续吸附, 与PTFE作用的亚甲基基团减少, 分子逐渐直立, 固液界面自由能(γ_sl)明显降低. 对于支链化的阳离子和甜菜碱分子, 接触角均在浓度高于cmc后大幅度降低.     

CMC系列高分子表面活性剂与原油超低界面张力形成机理的研究

采用动态激光光散射及环境扫描电镜研究了羧甲基纤维素系列高分子表面活性剂与大庆原油形成超低界面张力的机理.结果表明,CMC系列高分子表面活性剂具有与低分子量表面活性剂相比拟的表/界面活性,其水溶液的表面张力可达2835mN/m,界面张力达到10^-110mN/m.碱的加入可显著降低高分子表面活性剂与原油的界面张力,在适当条件下界面张力达到超低值(10^-3mN/m),可望作为三次采油的驱油剂.等效烷烃模型研究表明,用碱与原油酸性组分的作用来解释碱能使界面张力下降至超低值的传统观点是不完善的,加入碱能使高分子表面活性剂胶束解缔,胶束数量增多,胶束粒径减小,单分子自由链增加,有利于高分子表面活性剂向界面迁移和排布,这是高分子表面活性剂和碱复配体系与原油界面张力下降至超低值的主要原因.     

不同体系中油酸甲酯与烷基苯磺酸盐协同效应研究

研究了表面活性剂/盐/模拟油体系与表面活性剂/碱/模拟油体系中油酸甲酯与表面活性剂协同效应机理.结果表明两种体系中协同效应机理不同.在盐体系中,油酸甲酯主要通过改变油相的等效烷烃碳数(EACN) 影响表面活性剂在油水相分配.而碱体系中,油酸甲酯影响表面活性剂在油水相分配从而影响界面张力；另一方面,油酸甲酯吸附在界面上顶替表面活性剂分子影响界面张力.对于不同结构表面活性剂,两种作用竞争的结果不同.     

表面活性剂与高分子链混合体系的模拟

计算机模拟了高分子链对表面活性剂胶束形成过程的影响，以及高分子链构象性质随胶束化过程的变化.结果表明,当高分子链与表面活性剂之间的相互作用强度超过临界值后，高分子链的存在有利于表面活性剂胶束的形成.临界聚集浓度（CAC）与临界胶束浓度（CMC）的比值CAC/CMC随高分子链长的增大和相互吸引作用的增强而减小.在CAC之前，高分子链与表面活性剂分子只有动态的聚集；但在CAC之后，表面活性剂胶束随表面活性剂浓度X的增加而增大，并静态地吸附在高分子链上，形成表面活性剂/高分子聚集体.随着表面活性剂分子的加入，高分子链的均方末端距和平均非球形因子先保持恒定；从X略小于CAC开始， 和快速减小，至极小值后又逐渐增大.模拟结果支持高分子链包裹在胶束表面的实验模型.     

阴、阳离子表面活性剂混合体系在硅胶/水及硅胶/矿化水界面上的吸附

研究阴、阳离子表面活性剂混合体系(十二烷基氯代吡啶,辛基磺酸钠,辛基三乙基溴化铵/十二烷基苯磺酸钠)在硅胶,纯水和硅胶,矿化水界面上的吸附作用,探讨阴(阳)离子表面活性剂的存在对阳(阴)离子表面活性剂吸附作用的影响．结果表明,阴离子表面活性剂的存在基本不影响阳离子表面活性剂在带负电固体表面的吸附;而阳离子表面活性剂的存在却使本来吸附量就不大的阴离子表面活性剂在带负电的固体表面上不再吸附．在矿化水中阳离子表面活性剂的吸附量比在纯水中明显降低．从硅胶表面吸附机制解释了所得结果．     

Adsorption of a polymeric siloxane surfactant on carbon black particles dispersed in mixtures of water with polar organic solvents

The adsorption of a rake-type polymeric siloxane surfactant (polydimethylsiloxane-graft-polyether copolymer) on carbon black (CB) particles dispersed in mixtures of water with polar organic solvents (ethanol, formamide, or glycerol) has been investigated. The adsorption obeys the Langmuir isotherm at low surfactant concentrations (below the critical micelle concentration, CMC). At these conditions, the average surface area occupied by one siloxane surfactant follows the sequence water+glycerol mixture >plain water >water+ethanol mixture. At higher surfactant concentrations in the solution in contact with the particles, a sharp increase in the adsorbed amount is observed. The adsorbed layer thickness has been determined by dynamic light scattering. Below the CMC the adsorbed layer thickness is less than 10 nm. Above the CMC, the adsorbed layer thickness increases to 20-30 nm, a length scale comparable to the diameter of the siloxane surfactant micelles in aqueous solution. This fact, together with SANS data that we have obtained in the absence of added polar organic solvent, indicates that the structure of the adsorbed layer is similar to that of micelles. The findings presented here are relevant to waterborne coatings and ink formulations, where polymeric surfactants are used in conjunction with polar organic solvents.     

A review on experimental studies of surfactant adsorption at the hydrophilic solid-water interface

The progresses of understanding of the surfactant adsorption at the hydrophilic solid-liquid interface from extensive experimental studies are reviewed here. In this respect the kinetic and equilibrium studies involves anionic, cationic, non-ionic and mixed surfactants at the solid surface from the solution. Kinetics and equilibrium adsorption of surfactants at the solid-liquid interface depend on the nature of surfactants and the nature of the solid surface. Studies have been reported on adsorption kinetics at the solid-liquid interface primarily on the adsorption of non-ionic surfactant on silica and limited studies on cationic surfactant on silica and anionic surfactant on cotton and cellulose. The typical isotherm of surfactants in general, can be subdivided into four regions. Four-regime isotherm was mainly observed for adsorption of ionic surfactant on oppositely charged solid surface and adsorption of non-ionic surfactant on silica surface. Region IV of the adsorption isotherm is commonly a plateau region above the CMC, it may also show a maximum above the CMC. Isotherms of four different regions are discussed in detail. Influences of different parameters such as molecular structure, temperature, salt concentration that are very important in surfactant adsorption are reviewed here. Atomic force microscopy study of different surfactants show the self-assembly and mechanism of adsorption at the solid-liquid interface. Adsorption behaviour and mechanism of different mixed surfactant systems such as anionic-cationic, anionic-non-ionic and cationic-non-ionic are reviewed. Mixture of surface-active materials can show synergistic interactions, which can be manifested as enhanced surface activity, spreading, foaming, detergency and many other phenomena.     

羧甲基纤维素系列高分子表面活性剂的嵌段结构对其形态和性能的影响

采用超声波辐照聚合的羧甲基纤维素 (CMC)系列高分子表面活性剂是由CMC嵌段和含有等长双亲性支链的嵌段构成的共聚物 ,研究结果表明 ,CMC链段保证了共聚物的增粘性能 ,双亲性嵌段提供了共聚物优良的表面活性 ;CMC增粘嵌段与表面活性嵌段作为共聚物的两个嵌段 ,各发挥其作用 ,得到既有增粘性能又有高表面活性的双亲性共聚物 .     

Water-Based Oil Spill Dispersants Based on Rosin Formaldehyde Resins

Water-soluble surfactants based on rosin acids were synthesized from condensed rosin acid-formaldehyde. This was completed by esterification of series of rosin acid formaldehyde resins with poly(ethylene glycol) having different molecular weights to produce series of rosin esters. The structure of the produced resins was determined by infrared and ¹HNMR analysis. The molecular weight of the produced surfactants was determined by gel permeation chromatography (GPC) technique. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The surface tension, critical micelle concentration (CMC), and surface activities were determined at different temperatures. Surface parameters such as surface excess concentration (Γmax), the area per molecule at interface (A_min), and the effectiveness of surface tension reduction (πCMC) were determined from the adsorption isotherms of the prepared surfactants. Some thermodynamic data for the adsorption process were calculated and are discussed. The dispersion efficiency of the prepared surfactants as petroleum oil spill dispersants was determined and correlated with the surface activity, concentrations of the prepared surfactants and type of petroleum crude oil.     

Surface activity—thermodynamic properties and light scattering studies for some novel aliphatic polyester surfactants

The preparation of 12 new polyester surfactants based on aliphatic amines and different ethylene oxide content is described. These surfactants were characterized by determining their molecular weights and polydispersity by gel permeation chromatography (GPC) and nitrogen content. Drop volume tensiometry (DVT) was used to measure the surface tension at 25, 35, 45 and 55°C. The surface tension isotherms were used to determine critical micelle concentration (CMC), maximum Gibb's adsorption (Γ_max), minimum area per molecule (A_min), the effectiveness of surface tension reduction (π_cmc) and the efficiency (pC₂₀). The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad, ΔS_ad) were calculated and the data showed that these surfactants favor micellization to adsorption. The static scattered light intensity measurements provide the calculation of the molecular weight of micelle and the aggregation number (N°), while the dynamic light scattering provide the hydrodynamic radius of micelle (R_H) and the diffusion coefficient at different surfactant concentrations. The hydrodynamic radius of micelle (R_H) at different surfactant concentrations could be used also to determine the CMC giving results that are comparable to those obtained by surface tension measurements. All the data are discussed regarding the chemical structure of the polymeric surfactants. Copyright © 2004 John Wiley & Sons, Ltd.     

Adsorption and mobility of a lipase at a hydrophobic surface in the presence of surfactants

With the aim of being able to manipulate the processes involved in interfacial catalysis, we have studied the effects of a mixture of nonionic/anionic surfactants, C12E6/LAS (1:2 mol %), on the adsorption and surface mobility of a lipase obtained from Thermomyces lanuginosus (TLL). Surface plasmon resonance (SPR) and ellipsometry were used to analyze the competitive adsorption process between surfactants and TLL onto hydrophobic model surfaces intended to mimic an oily substrate for the lipase. We obtained the surface diffusion coefficient of a fluorescently labeled TLL variant on silica silanized with octadecyltrichlorosilane (OTS) by fluorescence recovery after photobleaching (FRAP) on a confocal laser scanning microscope. By means of ellipsometry we calibrated the fluorescence intensity with the surface density of the lipase. The TLL diffusion was measured at different surface densities of the enzyme and at two time intervals after coadsorption with different concentrations of C12E6/LAS. The surfactant concentrations were chosen to represent concentrations below the critical micelle concentration (CMC), in the CMC region, and above the CMC. The apparent TLL surface diffusion was extrapolated to infinite surface dilution, D0. We found that the presence of surfactants strongly modulated the surface mobility of TLL: with D(0) = 0.8 x 10(-11) cm2/s without surfactants and D0 = 13.1 x 10(-11) cm2/s with surfactants above the CMC. The increase in lipase mobility on passing the CMC was also accompanied by a 2-fold increase in the mobile fraction of TLL. SPR analysis revealed that surface bound TLL was displaced by C12E6/LAS in a concentration-dependent manner, suggesting that the observed increase in surface mobility imparts bulk-mediated diffusion and so-called rebinding of TLL to the surface. Our combined results on lipase/surfactant competitive adsorption and lipase surface mobility show how surfactants may play an important role in regulating interfacial catalysis from physiological digestion to technical applications such as detergency.     

Disruption of viscoelastic beta-lactoglobulin surface layers at the air-water interface by nonionic polymeric surfactants

Nonequilibrium interfacial layers formed by competitive adsorption of beta-lactoglobulin and the nonionic triblock copolymer PEO99-PPO65-PEO99 (F127) to the air-water interface were investigated in order to explain the influence of polymeric surfactants on protein film surface rheology and foam stability. Surface dilatational and shear rheological methods, surface tension measurements, dynamic thin-film measurements, diffusion measurements (from fluorescence recovery after photo bleaching), and determinations of foam stability were used as methods. The high surface viscoelasticity, both the shear and dilatational, of the protein films was significantly reduced by coadsorption of polymeric surfactant. The drainage rate of single thin films, in the presence of beta-lactoglobulin, increased with the amount of added F127, but equilibrium F127 films were found to be thicker than beta-lactoglobulin films, even at low concentration of the polymeric surfactant. It is concluded that the effect of the nonionic triblock copolymer on the interfacial rheology of beta-lactoglobulin layers is similar to that of low molecular weight surfactants. They differ however in that F127 increases the thickness of thin liquid films. In addition, the significant destabilizing effect of low molecular weight surfactants on protein foams is not found in the investigated system. This is explained as due to long-range steric forces starting to stabilize the foam films at low concentrations of F127.